summaryrefslogtreecommitdiffstats
path: root/src/vnet/ip/ip4_forward.c
AgeCommit message (Collapse)AuthorFilesLines
2017-11-07vnet: ip4/6_local-> don't drop TCP/UCP marked for cksum calc fixJakub Grajciar1-7/+7
Change-Id: Id14826eefe43168747c8ba69b3b600441a7d4047 Signed-off-by: Jakub Grajciar <Jakub.Grajciar@pantheon.tech>
2017-11-03vnet: ip4/6_local->don't drop packet if marked for TCP/UDP offload cksum ↵Jakub Grajciar1-5/+14
calculation Change-Id: I62f625a93e5d818caef382316035cd5447bd8fef Signed-off-by: Jakub Grajciar <Jakub.Grajciar@pantheon.tech>
2017-10-15ip: avoid arp assert if out of buffers (VPP-1030)Florin Coras1-0/+4
Change-Id: Ia31b978c6c1619c3e0075a84fcbbb6ccbf1c0076 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-10session: add support for application namespacingFlorin Coras1-0/+5
Applications are now provided the option to select the namespace they are to be attached to and the scope of their attachement. Application namespaces are meant to: 1) constrain the scope of communication through the network by association with source interfaces and/or fib tables that provide the source ips to be used and limit the scope of routing 2) provide a namespace local scope to session layer communication, as opposed to the global scope provided by 1). That is, sessions can be established without assistance from transport and network layers. Albeit, zero/local-host ip addresses must still be provided in session establishment messages due to existing application idiosyncrasies. This mode of communication uses shared-memory fifos (cut-through sessions) exclusively. If applications request no namespace, they are assigned to the default one, which at its turn uses the default fib. Applications can request access to both local and global scopes for a namespace. If no scope is specified, session layer defaults to the global one. When a sw_if_index is provided for a namespace, zero-ip (INADDR_ANY) binds are converted to binds to the requested interface. Change-Id: Ia0f660bbf7eec7f89673f75b4821fc7c3d58e3d1 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-10punt and drop features:Neale Ranns1-72/+5
- new IPv4 and IPv6 feature arcs on the punt and drop nodes - new features: - redirect punted traffic to an interface and nexthop - police punted traffic. Change-Id: I53be8bf4e06545add8a3619e462de5ffedd0a95c Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-09NAT: hairpinning rework (VPP-1003)Matus Fabian1-1/+9
Change-Id: I7c6911cd6ac366fe62675fd0ff8b0246a25ea1db Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-10-04[aarch64] Fixes CLI crashes on dpaa2 platform.Christophe Fontaine1-3/+3
- always use 'va_args' as pointer in all format_* functions - u32 for all 'indent' params as it's declaration was inconsistent Change-Id: Ic5799309a6b104c9b50fec309cba789c8da99e79 Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
2017-10-03Repair vlib API socket serverDave Barach1-8/+16
- Teach vpp_api_test to send/receive API messages over sockets - Add memfd-based shared memory - Add api messages to create memfd-based shared memory segments - vpp_api_test supports both socket and shared memory segment connections - vpp_api_test pivot from socket to shared memory API messaging - add socket client support to libvlibclient.so - dead client reaper sends ping messages, container-friendly - dead client reaper falls back to kill (<pid>, 0) live checking if e.g. a python app goes silent for tens of seconds - handle ping messages in python client support code - teach show api ring about pairwise shared-memory segments - fix ip probing of already resolved destinations (VPP-998) We'll need this work to implement proper host-stack client isolation Change-Id: Ic23b65f75c854d0393d9a2e9d6b122a9551be769 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-20Add ip6-local feature arcPierre Pfister1-1/+7
ip4-local feature arc existed but not ip6-local one. This patch also adds node name to the 'show ip local' command and fixes a minor include issue in vnet/ip/ip4.h file. Change-Id: I9bb8a7159917d58f89afcce974680de20d946a70 Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2017-09-15dpdk: cli to check for buffer leakageFlorin Coras1-0/+1
Use buffer pre_data and existing buffer trace trajectory code to find out dpdk buffer leakages. Change-Id: I26a5d8bd2f23d01cb6070ffc3ddcc6d3d863b575 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-11arp/glean: fix hash computationFlorin Coras1-1/+2
Change-Id: Ifef8a9328bb865f6ddb041bafe3699153f89755a Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-11FIB table add/delete APINeale Ranns1-97/+4
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-16ip4: cleanup ip localFlorin Coras1-153/+85
Change-Id: I4f751b0181f25ec6c4abd3a9c7b0386d80743b3a Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-08-11Fix tcp multi buffer segments retransmissionFlorin Coras1-5/+7
- Fix tcp/udp sw checksum computation - Fix allocation of multi buffer tcp segments for retransmits - Send FIN only if/when tx fifo is empty Change-Id: I2e43a14b87a72c9e547b4339b9a51811cf5732c4 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-08-08L2 over MPLSNeale Ranns1-3/+3
[support for VPWS/VPLS] - switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths - VLIB nodes to handle pop/push of MPLS labels to L2 Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-02Fix vpp crash sending arp or probing neighb (VPP-917)Pavel Kotucek1-0/+14
VPP crash when trying to send arp message or to probe neighbor over interface with IP address but without hw address (local0 and tunnels - vxlan, gre, ...) Change-Id: I08a1c97d3ea913fc11b2886cf73b2ccc31356664 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-07-20Fix coverity issue introduced with IP checksum offload commitDamjan Marion1-3/+3
Change-Id: Ib5ad1369678389534426902ce698bccf7a6d9ec2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-07-18TCP/UDP checksum offload APIDave Barach1-3/+6
Change-Id: I2cb6ce4e29813f6602b14e6e61713fb381fbcef8 Signed-off-by: Dave Barach <dave@barachs.net>
2017-07-14vnet_buffer_t flags cleanupDamjan Marion1-19/+19
Change-Id: I123eccea98abafeb31f25d2a162501e2eded60d4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-07-14Introduce l{2,3,4}_hdr_offset fields in the buffer metadataDamjan Marion1-3/+3
To save space in the first cacheline following is changed: - total_length_not_including_first_buffer moved to the 2nd cacheline. This field is used only when VLIB_BUFFER_TOTAL_LENGTH_VALID and VLIB_BUFFER_NEXT_PRESENT are both set. - free_list_index is now stored in 4bits inside flags, which allows up to 16 free lists. In case we need more we can store index in the 2nd cachelin Change-Id: Ic8521350819391af470d31d3fa1013e67ecb7681 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-06-23IP4/IP6 FIB: fix crash during interface deletePavel Kotucek1-0/+17
after deleting a sub interface with IP4/IP6 address vpp crash Change-Id: Ie768ca845b9e2394f61e2a8e9722a80a788746e7 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-06-01Fix 'ip probe' on /32Neale Ranns1-24/+26
Change-Id: Ib874ad93357500b2c425d75cf48834264b2183fc Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-26MPLS lookup DPO does not pop the label (nor does it handle replicate)Neale Ranns1-1/+0
Change-Id: I7de6b96631d1645d0eadd38525860d84d78e316d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-03change ip4_drop_node node register coding formatflyingeagle231-2/+2
Change-Id: Id4fdf2abf3bae3b14cdc6489ca16d2007da78d07 Signed-off-by: flyingeagle23 <wang.hui56@zte.com.cn>
2017-04-26IP Flow Hash Config fixesNeale Ranns1-3/+2
- the flow hash config is (and was) cached on the load-balance object so the fib_table_t struct is not used a switch time. Therefore changes to the table's flow hash config need to be propagated to all load-balances and hance all FIB entries in the table. - enable API for setting the IPv6 table flow hash config - use only the hash config in the fib_table_t object and not on the ipX_fib_t - add tests. Change-Id: Ib804c11162c6d4972c764957562c372f663e05d4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-24Improve Load-Balance MAPsNeale Ranns1-59/+78
- only build them for popular path-lists (where popular means more than 64 children) the reason to have a map is to improve convergence speed for recursive prefixes - if there are only a few this technique is not needed - only build them when there is at least one path that has recursive constraints, i.e. a path that can 'fail' in a PIC scenario. - Use the MAPS in the switch path. - PIC test cases for functionality (not convergence performance) Change-Id: I70705444c8469d22b07ae34be82cfb6a01358e10 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-13Remove unsed parameter from fib_table_entry_special_add() (only used in FIB ↵Neale Ranns1-4/+2
tests). The DPO was incorrectly initialised with FIB_PROTO_MAX Change-Id: I962df9e162e4dfb6837a5ce79ea795d5ff2d7315 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-11Remove usued, redundant and deprecated code from lookup.hNeale Ranns1-9/+10
Change-Id: Ic16bc10d0b2877b2afdf052615f9334f31b9519f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-07MPLS McastNeale Ranns1-0/+20
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-06Use thread local storage for thread indexDamjan Marion1-17/+17
This patch deprecates stack-based thread identification, Also removes requirement that thread stacks are adjacent. Finally, possibly annoying for some folks, it renames all occurences of cpu_index and cpu_number with thread index. Using word "cpu" is misleading here as thread can be migrated ti different CPU, and also it is not related to linux cpu index. Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-01MTRIE Optimisations 2Neale Ranns1-21/+0
1) 16-8-8 stride. Reduce trie depth walk traded with increased memory in the top PLY. 2) separate the vector of protocol-independent (PI) fib_table_t with the vector of protocol dependent (PD) FIBs. PD FIBs are large structures, we don't want to burn the memory for ech PD type 3) Go straight to the PD FIB in the data-path thus avoiding an indirection through, e.g., a PLY pool. Change-Id: I800d1ed0b2049040d5da95213f3ed6b12bdd78b7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-29IP lookup: remove used stack variablesNeale Ranns1-21/+5
Change-Id: I19b16d3e04a187ffe736fae868941957c70edf62 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-29Mtrie optimisationsNeale Ranns1-54/+11
1 - make the default route non-special, i.e. like any other less specific route. Consequently, all buckets have a valid valid index of either a leaf or a ply. Checks for special indeices in the data-path can thus be removed. 2 - since all leaves are now 'real' i.e. they represent a real load-balance object, to tell if a ply slot is 'empty' requeirs chekcing that the prefix length of the leaf occupying the slot is slot than the minium value for that ply. 3 - when removing a leaf find the cover first, then recurse down the ply and replace the old leaf with the cover. This saves us a ply walk. Change-Id: Idd523019e8bb1b6ef527b1f5279a5e24bcf18332 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-29Sub-net broadcast addresses for IPv4Neale Ranns1-3/+70
Change-Id: Ib2189d01e8bc61de57404159690fb70f89c47277 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-27Mcast rewrite no memcpyNeale Ranns1-3/+3
use a 32bit mask in the adjacency to AND with the IP address and OR into the rewrite. Change-Id: I80b0f246c18fd74f3e43c5d49e25833412f34665 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-1764 bit per-thread countersNeale Ranns1-17/+19
after: TenGigabitEthernet5/0/1-output active 107522 17375708 0 7.22e0 161.60 TenGigabitEthernet5/0/1-tx active 107522 17375708 0 6.93e1 161.60 ip4-input-no-checksum active 107522 17375708 0 2.52e1 161.60 ip4-lookup active 107522 17375708 0 3.10e1 161.60 ip4-rewrite active 107522 17375708 0 2.52e1 161.60 before TenGigabitEthernet5/0/1-output active 433575 110995200 0 6.95e0 256.00 TenGigabitEthernet5/0/1-tx active 433575 110995200 0 7.14e1 256.00 ip4-input-no-checksum active 433575 110995200 0 2.66e1 256.00 ip4-lookup active 433575 110995200 0 3.29e1 256.00 ip4-rewrite active 433575 110995200 0 2.59e1 256.00 Change-Id: I46405bd22189f48a39f06e3443bb7e13f410b539 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-17Fix IP feature ordering.Neale Ranns1-17/+12
Drop comes before lookup when enabled. is_first_or_last is not required when setting a feature, the anchor is added in find_config_with_features(). Don't make the PG interfaces automatically L3 enabled, this way we can have tests that check the L3 protocol disbaled behaviour. Change-Id: Icef22a920b27ff9cec6ab2da6b05f05c532cb60f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-17Cache a 'has-features' flag on the adjacency for faster access. Reclaim the ↵Neale Ranns1-8/+13
node_index memeber from the rewrite for space - this is only used for formtting before: ip4-rewrite * * * * 2.66e1 256.00 after: ip4-rewrite * * * * 2.40e1 256.00 Change-Id: Ic397150727cad38811564777419ad6bd26b8a3a6 Signed-off-by: Neale Ranns <nranns@wasa-ucs-11.cisco.com>
2017-03-07Register TCP with IP only if session is enabledFlorin Coras1-1/+2
Change-Id: I73154179e78aeae5f879125237bce593d0978fae Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-03-07make per-adj counters configurableNeale Ranns1-17/+35
Change-Id: Ifdd2b204ecf7d855f1269c11224b9c825311904d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-07Fixing loadbalancing over ECMP for recursive routesAkshayaNadahalli1-6/+5
Change-Id: Ibe1734aeb94bc17cd8d8bc6f35ca7b780aaa9599 Signed-off-by: AkshayaNadahalli <anadahal@cisco.com>
2017-03-03Changing the IP table for an interface is an error if the interface already ↵Neale Ranns1-28/+43
has an address configured (VPP-601) Change-Id: I311fc264f73dd3b2b3ce9d7d1c33cd0515b36c4a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-01VPP-598: tcp stack initial commitDave Barach1-64/+109
Change-Id: I49e5ce0aae6e4ff634024387ceaf7dbc432a0351 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-01-27IP Multicast FIB (mfib)Neale Ranns1-327/+171
- IPv[46] mfib tables with support for (*,G/m), (*,G) and (S,G) exact and longest prefix match - Replication represented via a new replicate DPO. - RPF configuration and data-plane checking - data-plane signals sent to listening control planes. The functions of multicast forwarding entries differ from their unicast conterparts, so we introduce a new mfib_table_t and mfib_entry_t objects. However, we re-use the fib_path_list to resolve and build the entry's output list. the fib_path_list provides the service to construct a replicate DPO for multicast. 'make tests' is added to with two new suites; TEST=mfib, this is invocation of the CLI command 'test mfib' which deals with many path add/remove, flag set/unset scenarios, TEST=ip-mcast, data-plane forwarding tests. Updated applications to use the new MIFB functions; - IPv6 NS/RA. - DHCPv6 unit tests for these are undated accordingly. Change-Id: I49ec37b01f1b170335a5697541c8fd30e6d3a961 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-25[re]Enable per-Adjacency/neighbour countersNeale Ranns1-17/+25
Change-Id: I953b3888bbc6d8a5f53f684a5edc8742b382f323 Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+3345
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>