Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: feature
Based on the configuration, we can disable checksum offload capability
and calculate checksum while pushing the TCP & IP header.
This saves some cycles when VPP stack is used in legacy hardware devices.
Signed-off-by: Srikanth A <srakula@cisco.com>
Change-Id: Ic1b3fcf3040917e47ee65263694ebf7437ac5668
(cherry picked from commit 3642782a2748503f5b5ccf89d1575c1d489948ef)
|
|
this is a preparation step for introducing other reassembly types
Type: refactor
Change-Id: I197e299dbd729b00eead31667913b8ceff915d63
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
In addition to the external vppapitrace tool, VPP itself supports dumping of API trace files.
In two formats, "custom-dump" and "dump". "dump" gives a human friendly list,
and "custom-dump" is meant to give a list of commands that can be fed to VAT.
This patch only deals with "dump".
Prior to this fix, auto-generation was only done for the basic types.
This fix adds support for any type, including lists, and supports pretty-printing
of enums, strings, IP addresses, MAC addresses and so on.
Usage: api trace dump <api-trace-file>
For example
Change-Id: I4e485680e6dcfce7489299ae6cf31d835071ac40
---------- trace 48 -----------
vl_api_sw_interface_set_flags_t:
_vl_msg_id: 75
client_index: 0
context: 10
sw_if_index: 1
flags: IF_STATUS_API_FLAG_ADMIN_UP
---------- trace 49 -----------
vl_api_sw_interface_add_del_address_t:
_vl_msg_id: 88
client_index: 0
context: 11
sw_if_index: 1
is_add: 1
del_all: 0
prefix: 172.16.1.1/24
---------- trace 51 -----------
vl_api_cli_inband_t:
_vl_msg_id: 819
client_index: 0
context: 13
cmd: packet-generator capture pg0 pcap /tmp/vpp-unittest-TestMAP-YhcmDX/pg0_out.pcap disable
---------- trace 58 -----------
vl_api_ip_neighbor_add_del_t:
_vl_msg_id: 199
client_index: 0
context: 20
is_add: 1
neighbor:
sw_if_index: 2
flags: IP_API_NEIGHBOR_FLAG_NONE
mac_address: 0202.0000.ff02
ip_address: fd01:2::2
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I5556d06008de2762e7c2d35a8b0963ae670b3db1
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Too many prefetches within loop unrollings induce bottleneck and
performance degradation on some CPUs which have less cache line fill
buffers, e.g, Arm Cortex-A72.
Apply dual loop unrolling and tune prefetches manually to remove
hot-spot with prefetch instructions, to get throughput improvement.
It brings about 7% throughput improvement and saves 28% clocks with
ip4_rewrite nodes on Cortex-A72 CPUs.
Type: feature
Change-Id: I0d35ef19faccbd7a5a4647f50bc369bfcb01a20d
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
|
|
When checksumming chained buffers with odd lengths: insert a
NULL byte, or the calculation fails.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I380f7c42897bdb28c8c29aa1c4cdaaa849cc9ecc
|
|
The function ip4_rewrite_inline_with_gso can leverage
the existing vlib_buffer_advance to simplify code.
Type: fix
Change-Id: I25d943dc78aba2f67654385cf3f693eb01e0210e
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
|
|
Type: feature
Adding a prefix to an interface was not permitted if it overlapped
with another prefix on an interface which used the same FIB.
Loosen the restriction. Allow 2 or more addresses from the same
prefix on a single interface. Reference count the prefix to figure
out when a glean/connected route for the prefix needs to be added
or removed.
Added unit tests to check that the route is only removed when all
addresses in the prefix are removed from the interface.
Change-Id: I1a962ecb5e1ee65fc6d41f98a4cc097a51a55321
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Fix ip6_tcp_udp_icmp_compute_checksum to work properly for packets
with multiple buffers.
Fix ip4_tcp_udp_compute_checksum to exit upon detecting error.
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I673547f4479d72cd60757383343fc562cff10265
|
|
Type: feature
When admin status is changed on an interface, add or delete the
routes for the IPv4 addresses configured on that interface.
This is already being done for IPv6 interface addresses.
Change-Id: Ib1e7dc49c499921dd287e075640243520ffa5589
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: feature
ip4_local_check_src() was overwriting vnet buffer opaque data
on the adjacency for packets with "local" (dpo-receive) destination
addresses.
Retain the dpo receive index in vnet_buffer()->adj_index[VLIB_TX].
This can allow a graph node to distinguish the interface where the
destination address is configured from the interface where the
packet was received. This can be useful in correctly handling
packets that have been sent to an address configured on a loopback
interface.
Change-Id: I52a942e85b5302b338a2d0404a37c5ea1a99e89f
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: refactor
Change-Id: I791cc63e989df049104420faf74fc28f965b6648
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I0c2d6fccd95146e52bb88ca4a6e84554d5d6b2ed
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- arp-input, registered with the ethernet protocol dispatcher, performs
basic checks and starts the arc
- arp-reply; first feature on the arc replies to requests and learns
from responses (no functional change)
- arp-proxy; checks against the proxy DB
arp-reply and arp-proxy are enabled when the interface is appropriately
configured.
Change-Id: I7d1bbabdb8c8b8187cac75e663daa4a5a7ce382a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
TBH, this looks like merge damage or some such. Perfectly fine NULL pointer
check, about three lines after it was needed.
Change-Id: I52831062e30533a59fb76b644ee5ae389676d2ae
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
before and after:
ip4-load-balance 1.54e1
ip4-load-balance 1.36e1
p.s. Quad loops were not beneficial
Change-Id: I7bc01fc26288f0490af74db2b1b7993526c3d982
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
vlib_get_buffers can save 1.2 clocks/pkt from 16.1 to 14.9 clocks/pkt
on Skylake.
Change-Id: I79d8b58b192280af5e5a5f73562b6301e1821cec
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
|
|
Change-Id: I046e481a67fbeffdaa8504c8d77d232b986a61ee
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I215e1e0208a073db80ec6f87695d734cf40fabe3
Signed-off-by: Jim Thompson <jim@netgate.com>
|
|
Change-Id: I6527e3fd8bbbca2d5f728621fc66b3856b39d505
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
error should be recorded in buffer so that
process-error-punt can handle them correctly
Per Damjan's comments, move counter to under
else clause of last error0==NONE check. Both
v4 and v6 are changed.
Change-Id: I707c7877ccb12589337155173fc4a5200b42ee93
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
|
|
This commit adds a "gso" parameter to existing "create tap..." CLI,
and a "no-gso" parameter for the compatibility with the future,
when/if defaults change.
It makes use of the lowest bit of the "tap_flags" field in the API call
in order to allow creation of GSO interfaces via API as well.
It does the necessary syscalls to enable the GSO
and checksum offload support on the kernel side and sets two flags
on the interface: virtio-specific virtio_if_t.gso_enabled,
and vnet_hw_interface_t.flags & VNET_HW_INTERFACE_FLAG_SUPPORTS_GSO.
The first one, if enabled, triggers the marking of the GSO-encapsulated
packets on ingress with VNET_BUFFER_F_GSO flag, and
setting vnet_buffer2(b)->gso_size to the desired L4 payload size.
VNET_HW_INTERFACE_FLAG_SUPPORTS_GSO determines the egress packet
processing in interface-output for such packets:
When the flag is set, they are sent out almost as usual (just taking
care to set the vnet header for virtio).
When the flag is not enabled (the case for most interfaces),
the egress path performs the re-segmentation such that
the L4 payload of the transmitted packets equals gso_size.
The operations in the datapath are enabled only when there is at least
one GSO-compatible interface in the system - this is done by tracking
the count in interface_main.gso_interface_count. This way the impact
of conditional checks for the setups that do not use GSO is minimized.
"show tap" CLI shows the state of the GSO flag on the interface, and
the total count of GSO-enabled interfaces (which is used to enable
the GSO-related processing in the packet path).
This commit lacks IPv6 extension header traversal support of any kind -
the L4 payload is assumed to follow the IPv6 header. Also it performs
the offloads only for TCP (TSO - TCP segmentation offload).
The UDP fragmentation offload (UFO) is not part of it.
For debug purposes it also adds the debug CLI:
"set tap gso {<interface> | sw_if_index <sw_idx>} <enable|disable>"
Change-Id: Ifd562db89adcc2208094b3d1032cee8c307aaef9
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
-fno-common makes sure we do not have multiple declarations of the same
global symbol across compilation units. It helps debug nasty linkage
bugs by guaranteeing that all reference to a global symbol use the same
underlying object.
It also helps avoiding benign mistakes such as declaring enum as global
objects instead of types in headers (hence the minor fixes scattered
across the source).
Change-Id: I55c16406dc54ff8a6860238b90ca990fa6b179f1
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
use address_t and mac_address_t for IPv6 and ARP entries
and all other API calls in ip.api aprat from the route ones,
that will follow in a separate commit
Change-Id: I67161737c2184d3f8fc1e79ebd2b55121c5b0191
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ic65f686aaccaf8450732d88d7471b587faccaa9d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I0470b4b13095583fe018f565f100342fab45715e
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
|
|
ipsec4-output and ipsec6-output were conflicting with ipsec
interface names ("ipsec<id>") and vnet/interface.c autogenerated
output node ("<ifname>-output").
Changing feature names seems to be the less invasive option.
This patch also changes "input" feature names for consistency.
Change-Id: I4ba10d07e9ba09df20aa2500104252b06b55f8f7
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
Change-Id: Ib0d9b533d72c899b77c9a7bd1daa9b4a55b7221c
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Prefetching first 2 packets' header is useless cause of the prefetching
action is not done before using the packets.
There's no performance drop in Xeon platform and slightly performance
gain in Atom platform after rmoving the prefetch.
Change-Id: Ib4b074af20d7cd5053aecc7147b162141aec31f5
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
Verify that last node in the computed feature order matches
reality. This check doesn't make sense in all cases, so we skip it if
the newly-added vnet_feature_arc_registration_t ".last_in_arc" datum
is a NULL pointer.
Change-Id: Ia99c3e2b2da2e4780a7d5bc71670c5742a66fef2
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Idbce0393fc9e6e8dbb2765ed164ba7f90d1ffccc
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ided6c661edc9e2035fd7b472c312e2380d3f9c0b
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I93c6b7bccd1a1ab71625ae29c99c974581186c4d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Ic6b27659f1fe9e8df39e80a0441305e4e952195a
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I3aa4708c1c3cdda344f282d56b617677080eaaa1
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Makes it easy to add protocols that skip L4 checks.
Change-Id: I80ff95685bfa17e29c5800d9c96153cdc7739be2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- Error where ICMPv6 error code doesn't reset VLIB_TX = -1
Leading to crash for ICMP generated on tunnelled packets
- Missed setting VNET_BUFFER_F_LOCALLY_ORIGINATED, so
IP in IPv6 packets never got fragmented.
- Add support for fragmentation of buffer chains.
- Remove support for inner fragmentation in frag code itself.
Change-Id: If9a97301b7e35ca97ffa5c0fada2b9e7e7dbfb27
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Ic7f7af983d5b6d756748023aa0c650f53e9285cf
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
- perf improvement is around 3 clock per packet
- it properly prefetches ip header and rewrite area
Credits to zhiyong.yang@intel.com for spotting that in some cases
rewrite area is not prefetched.
Change-Id: Ie02913de7bd7f42b7df2617fb5fa87c74ab53c23
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Not only is it wasteful to send all fragments back through ip4-lookup, but
it doesn't work with tunnel mechanisms that don't have IP enabled on their
payload side.
Change-Id: Ic92d95982dddaa70969a2a6ea2f98edec7614425
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I68b55fc641da9dacc3343628b3e0cf77d3533313
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I810d834c407bd404d5f0544cdec0674f0bb92d31
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
The dev build ('make build') was failing because
ip4_rewrite_bcast() and ip6_rewrite_bcast() are declared static
and were not referenced.
The node functions that were set for directed broadcast rewrite:
ip4_rewrite_bcast_node - ip4_rewrite()
ip6_rewrite_bcast_node - ip6_rewrite()
Changed to:
ip4_rewrite_bcast_node - ip4_rewrite_bcast()
ip6_rewrite_bcast_node - ip6_rewrite_bcast()
The release build ('make build-release') succeeds because there is
a VLIB_NODE_FUNCTION_MULTIARCH() call referencing the function. That
macro is empty for dev builds.
Change-Id: I2a05f00ca43d0eae8ff2e3026991e69917003fe1
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
with ip direct broadcast enable a packet to the interface's
subnet broadcast address with be sent L2 broadcast on the
interface. dissabled, it will be dropped. it is disabled by
default, which preserves current behaviour
Change-Id: If154cb92e64834e97a541b32624354348a0eafb3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
It is cheaper to get thread index from vlib_main_t if available...
Change-Id: I4582e160d06d9d7fccdc54271912f0635da79b50
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Thanks to gcc-8 for highlighting this...
Change-Id: I53bfab631a40fd1b680c76a48b0307a33fa2b154
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
After calling vlib_packet_template_get_packet(), make sure
packet buffer is allocated before using it.
Change-Id: Idb5199f4e2c9596137b2101e502d611f474a6ffe
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I12fbebd1d24c37dc77c147773ea522c8a4b7b99d
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: Ibae260273f25a319153be37470aed49ff73e957a
Signed-off-by: Ole Troan <ot@cisco.com>
|