Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I93c6b7bccd1a1ab71625ae29c99c974581186c4d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I4d1ab5ff0c8f0756e91bf63e045f88513bb7d039
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
also some moving of l2 headers to reduce dependencies
Change-Id: I7a700a411a91451ef13fd65f9c90de2432b793bb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ic20eea8f2fd19dd3c1728a1f7c622ef0c9728f81
Signed-off-by: ahdj007 <dong.juan1@zte.com.cn>
|
|
Change-Id: Iadfbe3c0d0c6dcec2b4ccf1695bd234358f6969a
Signed-off-by: shubing guo <guo.shubing@zte.com.cn>
|
|
Change-Id: I810d834c407bd404d5f0544cdec0674f0bb92d31
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Change-Id: I63c36644c9d93f2c3ec6606ca0205b407499de4e
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
with ip direct broadcast enable a packet to the interface's
subnet broadcast address with be sent L2 broadcast on the
interface. dissabled, it will be dropped. it is disabled by
default, which preserves current behaviour
Change-Id: If154cb92e64834e97a541b32624354348a0eafb3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
For L2 ARP termination, use both brodcast ARP request and reply
packets to provide MAC/IP binding events.
For IP4/IP6 neighbor adress resolution, send resolution events
if there is an address resolution attemp with a static neighbor
entry where both IP and MAC matches. This allow probe of an IP
neighbor with a static entry to confirm it is responding with
a reply matching that of the static entry.
Change-Id: Iffb923bb5aea3f9021436735d5ca06e7b24f966f
Signed-off-by: John Lo <loj@cisco.com>
|
|
A pipe resembles a unix pipe. Each end of the pipe is a full
VPP interface.
pipes can be used for e.g. packet recirculation, inter-BD, etc.
Change-Id: I185bb9fb43dd233ff45da63ac1b85ae2e1ceca16
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
After calling vlib_packet_template_get_packet(), make sure
packet buffer is allocated before using it.
Change-Id: Idb5199f4e2c9596137b2101e502d611f474a6ffe
Signed-off-by: John Lo <loj@cisco.com>
|
|
This patch separates setting of hardware interfaec and software
interface MTU. Software MTU is L2 payload MTU (i.e. not including L2
header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set.
Currently only IP4, IP6 are enabled in adjacency / rewrite code.
Documentation in src/vnet/MTU.md
Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Iaeb52d94cb6da63ee93af7c1cf2dade6046cba1d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I72a1ccdfdd5573335ef78fc01d5268934c73bd31
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
- Modify the API send_ip6_na and send_ip4_garp to take sw_if_index instead
of vnet_hw_interface_t and add call to build_ethernet_rewrite to support
subinterface/vlan
- Add code to bonding driver to send an event to bond_process when the first
interface becomes active or when the active interface is down
- Create a bond_process to walk the interface and the corresponding
subinterfaces to send garp/ip6_na when an event is received.
- Minor cleanup in bonding/node.c
Note: dpdk bonding driver does not send garp/ip6_na for subinterfaces. There is
no attempt to fix it here. But the infra is now done and should be easy to
add the support.
Change-Id: If3ecc4cd0fb3051330f7fa11ca0dab3e18557ce1
Signed-off-by: Steven <sluong@cisco.com>
|
|
Move handling of IP neighbor pool full into main thread on entry
creation and make sure static entriesare not deleted for reuse.
Fix IPv6 neighbor handling on interface down and up so that static
entries are not deleted.
Change-Id: I073794949a41a5b86201e519ebe479febfc506c8
Signed-off-by: John Lo <loj@cisco.com>
|
|
Replace binary API communication between CP and DP with
direct communication using function calls and callbacks.
Change-Id: Ib54f09062217c028e5ee0e96ae2449cf7e9224e3
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Scan IPv4 and IPv6 neigbor pool entries once a minute to keep them
up to date. The neighbor of an entry is probed if its time-stamp
is older than 1 minute. If the neighbor respond, its time-stamp
will be updated. If there is no response from a neighbor, its
entry will be deleted when the time-stamp of the entry become more
than 4 minutes old. Static neighbor entries are not probed nor
deleted.
Implemented CLI and API to enable and disable priodic scan of IPv4,
IPv6 or both types of IP neighbors. CLI is "ip scan-neighbor" and
API is "ip_scan_neighbor_enable_disable". Other IP neighbor scan
parameters can also be changed from their defaults via the CLI/API.
Change-Id: Id1a0a934ace15d03db845aa698bcbb9cdabebfcd
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I5cab31639e7819c9ab7e9c9159d931b25161d00b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- move the IPv6 incomplete and glean node to ip6_neighbour.c (so it has access to ip6_neighbour_main_t)
- use the RA info config on the interface to find the multicast adj to use
Change-Id: I835e419072abe54fb09dafb0e7eb0a9e50eba1af
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
hard code the address mask offsets. This are protocol specific and only used on ethernet when used at all.
Change-Id: Ib1f6f33682f53254ffbb5a241a1583e65420e0c7
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
interface)"
This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa.
Reverting as this patch is causing following crash:
0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails
Aborted
Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
update the GBP plugin to implement the full NAT feature set of opflex agent
Change-Id: Ic06a039c889445ed0b9087fa1f292634192b0f8d
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Add API call to send Router Solicitation messages.
Save info from incoming Router Advertisement messages and notify listeners.
Change-Id: Ie518b5492231e03291bd4c4280be4727bfecab46
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Removed the sole use of it from ip6_neighbor.c
Change-Id: Ie53cb3b6a3a41ec0917ec2042e5006d0cfaefc01
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- IPv6 link local table is a per-SW interface array of IPv6 unicast FIBs
- the per-interface ocst is sizeof(fib_table_t) which is small,
w.r.t. the cost of an interface
- FE80::/10 in the 'global' table points to a DPO that performs a lookup in the
input interface's LL fib.
Change-Id: Ice834b25ebeeacb2e929d7c864d7ec8c09918cbe
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I7b2f52b2b2ce13f27bddc8750b8fc564bf6ab73e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
and update glean address on local interface MAC change
Change-Id: I530826d60c7e9db2b0fa2d45754139d82c5ea807
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
This reverts commit 8b30e471df4d42214619e1d6c50cc8298426b45f.
Change-Id: I99edb236eb0a7f8ba3fba333c3481a710ebcb59c
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
update the glean adj on a local interface MAC change
Change-Id: Ia5c5cde424ed0fea3431532cc5abf22b364bbab5
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Send packets to ip4/6_punt/drop nodes instead of error-drop/punt nodes
dbarach: clean up an annoying checkstyle issue: indent 2.2.10
(OpenSUSE version) and indent 2.2.11 (Ubuntu / CentOS versions) had an
artistic disagreement about ip_frag.c.
Change-Id: I660bee28a064af9c6c70371363081e941d1c3a94
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- Teach vpp_api_test to send/receive API messages over sockets
- Add memfd-based shared memory
- Add api messages to create memfd-based shared memory segments
- vpp_api_test supports both socket and shared memory segment connections
- vpp_api_test pivot from socket to shared memory API messaging
- add socket client support to libvlibclient.so
- dead client reaper sends ping messages, container-friendly
- dead client reaper falls back to kill (<pid>, 0) live checking
if e.g. a python app goes silent for tens of seconds
- handle ping messages in python client support code
- teach show api ring about pairwise shared-memory segments
- fix ip probing of already resolved destinations (VPP-998)
We'll need this work to implement proper host-stack client isolation
Change-Id: Ic23b65f75c854d0393d9a2e9d6b122a9551be769
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
wildcard ND events publisher was sending the last event mutiple times
Change-Id: I6c30f2de03fa825e79df9005a3cfaaf68ff7ea2f
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I6cab79c266837a8731adcf78c9e093dfa6be0ead
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
part 2;
- this adds the code to create an IP and MPLS table via the API.
- but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass.
Change-Id: Id124d884ade6cb7da947225200e3bb193454c555
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I87d3cb5754843f38593e92f60a39af2e5241d1cf
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
[support for VPWS/VPLS]
- switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths
- VLIB nodes to handle pop/push of MPLS labels to L2
Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I123eccea98abafeb31f25d2a162501e2eded60d4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
To save space in the first cacheline following is changed:
- total_length_not_including_first_buffer moved to the 2nd cacheline.
This field is used only when VLIB_BUFFER_TOTAL_LENGTH_VALID and
VLIB_BUFFER_NEXT_PRESENT are both set.
- free_list_index is now stored in 4bits inside flags, which
allows up to 16 free lists. In case we need more we can store index
in the 2nd cachelin
Change-Id: Ic8521350819391af470d31d3fa1013e67ecb7681
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
If a bonded interface is in active-backup mode and configured with
IPv4 and/or IPv6 addresses, on slave interface link up/down, send
a GARP packet if configured with an IPv4 address and an unsolcited
NA if configured with an IPv6 address. These packets can help with
faster route convergence in the next hop router/switch.
Change-Id: I68ccb11a4a40cda414704fa08ee0171c952befa2
Signed-off-by: John Lo <loj@cisco.com>
|
|
after deleting a sub interface with IP4/IP6 address vpp crash
Change-Id: Ie768ca845b9e2394f61e2a8e9722a80a788746e7
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
don't add duplicate extensions.
Change-Id: Icf72d6e1b004d0dda532bec2b51f6b74544925bb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
there are, intentionally, no validation checks in the ARP/ND code to prevent an ARP/ND entry from being installed for an address that is not local to the interface's sub-net. This is ok, since the adjacency/FIB code is designed to handle this case using the 'refinement' criteria - i.e. only installing a FIB entry for the address if the address 'refines' (i.e. is more specific than) the interface's sub-net.
However, the refinement criteria currently operates on the FIB entry's prefix (which is a /32, so on the address) and not on the next-hop in the path.
So, enter multiple ARP entries for the same address on different links, and this refinement criteria uses only the last added path, and so will remove the FIB entry should the ARP entries be added in the 'wrong' order.
This fix updates the refinement criteria to work on each path of the FIB entry. The entry is installed if one of the paths refines the covers and only paths refining the cover contribute forwarding.
Per-path refinement checks are stored in path-extensions. The patch is rather large as path-extension, which were previously used only for out-going MPLS labels, have been generalized.
Change-Id: I00be359148cb948c32c52109e832a70537a7920a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
learn ARP peers if, 1) it's a reply to a local address, 2) we are sending a response to a request.
send proxy ARP responses only in the interface the request was sent.
Change-Id: I22b949c65122824233076492b7dd537daca07bc2
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- only build them for popular path-lists (where popular means more than 64 children)
the reason to have a map is to improve convergence speed for recursive prefixes - if there are only a few this technique is not needed
- only build them when there is at least one path that has recursive constraints, i.e. a path that can 'fail' in a PIC scenario.
- Use the MAPS in the switch path.
- PIC test cases for functionality (not convergence performance)
Change-Id: I70705444c8469d22b07ae34be82cfb6a01358e10
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I4c3ce4d58df7977490fc94991291422ea1e31ee3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ic16bc10d0b2877b2afdf052615f9334f31b9519f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
1 - interface-DPO
Used in the Data-plane to change a packet's input interface
2 - MPLS multicast FIB entry
Same as a unicast entry but it links to a replicate not a load-balance DPO
3 - Multicast MPLS tunnel
Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to .
4 - Resolve a path via a local label (of an mLDP LSP)
For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP.
5 - MPLS disposition path sets RPF-ID
For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet.
6 - RPF check with per-entry RPF-ID
An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface.
Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This patch deprecates stack-based thread identification,
Also removes requirement that thread stacks are adjacent.
Finally, possibly annoying for some folks, it renames
all occurences of cpu_index and cpu_number with thread
index. Using word "cpu" is misleading here as thread can
be migrated ti different CPU, and also it is not related
to linux cpu index.
Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|