summaryrefslogtreecommitdiffstats
path: root/src/vnet/ip/ip6_neighbor.c
AgeCommit message (Collapse)AuthorFilesLines
2018-04-27IPv6 NS/RS; do not vec_validate global structs in the DPNeale Ranns1-12/+16
Change-Id: I5cab31639e7819c9ab7e9c9159d931b25161d00b Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-27IPv6 NS: use the mcast rewrite node to fill in the destination MACNeale Ranns1-0/+275
- move the IPv6 incomplete and glean node to ip6_neighbour.c (so it has access to ip6_neighbour_main_t) - use the RA info config on the interface to find the multicast adj to use Change-Id: I835e419072abe54fb09dafb0e7eb0a9e50eba1af Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-18Mcast rewrite optimisationsNeale Ranns1-2/+2
hard code the address mask offsets. This are protocol specific and only used on ethernet when used at all. Change-Id: Ib1f6f33682f53254ffbb5a241a1583e65420e0c7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-13Revert "MTU: Setting of MTU on software interface (instead of hardware ↵Damjan Marion1-2/+5
interface)" This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa. Reverting as this patch is causing following crash: 0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails Aborted Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-13MTU: Setting of MTU on software interface (instead of hardware interface)Ole Troan1-5/+2
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901 Signed-off-by: Ole Troan <ot@cisco.com>
2018-04-13GBP V2Neale Ranns1-1/+13
update the GBP plugin to implement the full NAT feature set of opflex agent Change-Id: Ic06a039c889445ed0b9087fa1f292634192b0f8d Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-16IPv6 ND Router discovery data plane (VPP-1095)Juraj Sloboda1-1/+345
Add API call to send Router Solicitation messages. Save info from incoming Router Advertisement messages and notify listeners. Change-Id: Ie518b5492231e03291bd4c4280be4727bfecab46 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-03-12Remove md5.[ch] from vppinfraDave Barach1-13/+2
Removed the sole use of it from ip6_neighbor.c Change-Id: Ie53cb3b6a3a41ec0917ec2042e5006d0cfaefc01 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-05IP6 link-local tableNeale Ranns1-52/+110
- IPv6 link local table is a per-SW interface array of IPv6 unicast FIBs - the per-interface ocst is sizeof(fib_table_t) which is small, w.r.t. the cost of an interface - FE80::/10 in the 'global' table points to a DPO that performs a lookup in the input interface's LL fib. Change-Id: Ice834b25ebeeacb2e929d7c864d7ec8c09918cbe Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-26IPv6 MLD; pointer address used as hash keyNeale Ranns1-3/+3
Change-Id: I7b2f52b2b2ce13f27bddc8750b8fc564bf6ab73e Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-02-16Allow providers to override glean behaviourNeale Ranns1-1/+9
and update glean address on local interface MAC change Change-Id: I530826d60c7e9db2b0fa2d45754139d82c5ea807 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-15Revert "Allow interface types to override glean adjacency behaivour"Ole Trøan1-5/+1
This reverts commit 8b30e471df4d42214619e1d6c50cc8298426b45f. Change-Id: I99edb236eb0a7f8ba3fba333c3481a710ebcb59c Signed-off-by: Ole Troan <ot@cisco.com>
2018-02-15Allow interface types to override glean adjacency behaivourNeale Ranns1-1/+5
update the glean adj on a local interface MAC change Change-Id: Ia5c5cde424ed0fea3431532cc5abf22b364bbab5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-15Fix icmp/udp/tcp punt/drop pathsVijayabhaskar Katamreddy1-4/+4
Send packets to ip4/6_punt/drop nodes instead of error-drop/punt nodes dbarach: clean up an annoying checkstyle issue: indent 2.2.10 (OpenSUSE version) and indent 2.2.11 (Ubuntu / CentOS versions) had an artistic disagreement about ip_frag.c. Change-Id: I660bee28a064af9c6c70371363081e941d1c3a94 Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com> Signed-off-by: Dave Barach <dave@barachs.net>
2017-10-03Repair vlib API socket serverDave Barach1-1/+2
- Teach vpp_api_test to send/receive API messages over sockets - Add memfd-based shared memory - Add api messages to create memfd-based shared memory segments - vpp_api_test supports both socket and shared memory segment connections - vpp_api_test pivot from socket to shared memory API messaging - add socket client support to libvlibclient.so - dead client reaper sends ping messages, container-friendly - dead client reaper falls back to kill (<pid>, 0) live checking if e.g. a python app goes silent for tens of seconds - handle ping messages in python client support code - teach show api ring about pairwise shared-memory segments - fix ip probing of already resolved destinations (VPP-998) We'll need this work to implement proper host-stack client isolation Change-Id: Ic23b65f75c854d0393d9a2e9d6b122a9551be769 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-22IP-MAC,ND:wildcard events,fix sending multiple eventsEyal Bari1-20/+53
wildcard ND events publisher was sending the last event mutiple times Change-Id: I6c30f2de03fa825e79df9005a3cfaaf68ff7ea2f Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-09-11replace uint32_t with u32Neale Ranns1-2/+2
Change-Id: I6cab79c266837a8731adcf78c9e093dfa6be0ead Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-11FIB table add/delete APINeale Ranns1-31/+77
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-15IPv6 local-address for P2P ethernet interfacesPavel Kotucek1-1/+2
Change-Id: I87d3cb5754843f38593e92f60a39af2e5241d1cf Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-08-08L2 over MPLSNeale Ranns1-5/+5
[support for VPWS/VPLS] - switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths - VLIB nodes to handle pop/push of MPLS labels to L2 Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-07-14vnet_buffer_t flags cleanupDamjan Marion1-2/+2
Change-Id: I123eccea98abafeb31f25d2a162501e2eded60d4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-07-14Introduce l{2,3,4}_hdr_offset fields in the buffer metadataDamjan Marion1-11/+8
To save space in the first cacheline following is changed: - total_length_not_including_first_buffer moved to the 2nd cacheline. This field is used only when VLIB_BUFFER_TOTAL_LENGTH_VALID and VLIB_BUFFER_NEXT_PRESENT are both set. - free_list_index is now stored in 4bits inside flags, which allows up to 16 free lists. In case we need more we can store index in the 2nd cachelin Change-Id: Ic8521350819391af470d31d3fa1013e67ecb7681 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-07-06Send GARP/NA on bonded intf slave up/down if in active-backup modeJohn Lo1-0/+53
If a bonded interface is in active-backup mode and configured with IPv4 and/or IPv6 addresses, on slave interface link up/down, send a GARP packet if configured with an IPv4 address and an unsolcited NA if configured with an IPv6 address. These packets can help with faster route convergence in the next hop router/switch. Change-Id: I68ccb11a4a40cda414704fa08ee0171c952befa2 Signed-off-by: John Lo <loj@cisco.com>
2017-06-23IP4/IP6 FIB: fix crash during interface deletePavel Kotucek1-1/+1
after deleting a sub interface with IP4/IP6 address vpp crash Change-Id: Ie768ca845b9e2394f61e2a8e9722a80a788746e7 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-05-26ARP/ND use path_remove to complement path_addNeale Ranns1-7/+31
don't add duplicate extensions. Change-Id: Icf72d6e1b004d0dda532bec2b51f6b74544925bb Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-23ARP/ND entries for the same address on different interfaces (VPP-848)Neale Ranns1-6/+6
there are, intentionally, no validation checks in the ARP/ND code to prevent an ARP/ND entry from being installed for an address that is not local to the interface's sub-net. This is ok, since the adjacency/FIB code is designed to handle this case using the 'refinement' criteria - i.e. only installing a FIB entry for the address if the address 'refines' (i.e. is more specific than) the interface's sub-net. However, the refinement criteria currently operates on the FIB entry's prefix (which is a /32, so on the address) and not on the next-hop in the path. So, enter multiple ARP entries for the same address on different links, and this refinement criteria uses only the last added path, and so will remove the FIB entry should the ARP entries be added in the 'wrong' order. This fix updates the refinement criteria to work on each path of the FIB entry. The entry is installed if one of the paths refines the covers and only paths refining the cover contribute forwarding. Per-path refinement checks are stored in path-extensions. The patch is rather large as path-extension, which were previously used only for out-going MPLS labels, have been generalized. Change-Id: I00be359148cb948c32c52109e832a70537a7920a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-17ARP learning fixes (VPP-843)Neale Ranns1-2/+6
learn ARP peers if, 1) it's a reply to a local address, 2) we are sending a response to a request. send proxy ARP responses only in the interface the request was sent. Change-Id: I22b949c65122824233076492b7dd537daca07bc2 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-24Improve Load-Balance MAPsNeale Ranns1-1/+1
- only build them for popular path-lists (where popular means more than 64 children) the reason to have a map is to improve convergence speed for recursive prefixes - if there are only a few this technique is not needed - only build them when there is at least one path that has recursive constraints, i.e. a path that can 'fail' in a PIC scenario. - Use the MAPS in the switch path. - PIC test cases for functionality (not convergence performance) Change-Id: I70705444c8469d22b07ae34be82cfb6a01358e10 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-19Learn IP6 link-local ND entries from NSs sourced from link-local addressNeale Ranns1-2/+5
Change-Id: I4c3ce4d58df7977490fc94991291422ea1e31ee3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-11Remove usued, redundant and deprecated code from lookup.hNeale Ranns1-4/+2
Change-Id: Ic16bc10d0b2877b2afdf052615f9334f31b9519f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-07MPLS McastNeale Ranns1-0/+1
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-06Use thread local storage for thread indexDamjan Marion1-2/+2
This patch deprecates stack-based thread identification, Also removes requirement that thread stacks are adjacent. Finally, possibly annoying for some folks, it renames all occurences of cpu_index and cpu_number with thread index. Using word "cpu" is misleading here as thread can be migrated ti different CPU, and also it is not related to linux cpu index. Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-03Adjacency layout change and move to vnet/adjNeale Ranns1-1/+0
Change-Id: I03195a86c69f84a301051c6b3ab64456bbf28645 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-01ARP/ND/API:fix arp reg + nd no identical regsEyal Bari1-55/+38
fixed arp registration without allocating the event added protection against identical ND registrations Change-Id: I4e2db4913b35d895d8686ada1f0818920f276ad6 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-03-30BRIDGE-DOMAIN:enable arp term,mac/ip learning on local intsEyal Bari1-5/+3
we should not suppress arps on remote interface instead we should flood them to the local one used shg != 0 to identify packets from remote interfaces and disable arp term l2 input feature for them Change-Id: I701537c05df7451a25ccb5bfc9e2b03ea70cff20 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-03-27Mcast rewrite no memcpyNeale Ranns1-21/+22
use a 32bit mask in the adjacency to AND with the IP address and OR into the rewrite. Change-Id: I80b0f246c18fd74f3e43c5d49e25833412f34665 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-09IMplementation for option to not create a FIB table entry when adding a ↵Neale Ranns1-21/+38
neighbor entry Change-Id: I952039e101031ee6a06e63f4c73d8eb359423e1a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-08Proxy ND (RFC4389 - or a sub-set thereof). This allows the 'emulation' of ↵Neale Ranns1-6/+130
bridging. That is hosts in one sub-net reachable via differenet interfaces. Introducate a new API command: ip6 nd proxy <host-address> <interface> this indicates 2 things; 1) that host <host-address> is reachable out of interface <interface>. VPP will thus install that route. 2) NS requests sent to <host-address> will be responeded to (i.e. proxied). Change-Id: I863f967fdb5097ab3b574769c70afdbfc8d5478a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-03IPv6 RA improvementsNeale Ranns1-146/+98
1) tests for RA options 2) memleaks deleteing a ip6_radv_info_t 3) MLD prefix code refactoring Change-Id: I34db103994bd8fbdbbec50b202d72770dd145681 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-03Changing the IP table for an interface is an error if the interface already ↵Neale Ranns1-0/+4
has an address configured (VPP-601) Change-Id: I311fc264f73dd3b2b3ce9d7d1c33cd0515b36c4a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-22VPP-635: CLI Memory leak with invalid parameterBilly McFall1-6/+21
In the CLI parsing, below is a common pattern: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else return clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); } unformat_free (line_input); The 'else' returns if an unknown string is encountered. There a memory leak because the 'unformat_free(line_input)' is not called. There is a large number of instances of this pattern. Replaced the previous pattern with: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else { error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); goto done: } } /* ...Remaining code... */ done: unformat_free (line_input); return error; } In multiple files, 'unformat_free (line_input);' was never called, so there was a memory leak whether an invalid string was entered or not. Also, there were multiple instance where: error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); used 'input' as the last parameter instead of 'line_input'. The result is that output did not contain the substring in error, instead just an empty string. Fixed all of those as well. There are a lot of file, and very mind numbing work, so tried to keep it to a pattern to avoid mistakes. Change-Id: I8902f0c32a47dd7fb3bb3471a89818571702f1d2 Signed-off-by: Billy McFall <bmcfall@redhat.com> Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-16Fix crash on deleting previously activated IPv6 interface - VPP-636Wojciech Dec1-0/+4
RADV Pool index was not getting updated Change-Id: I2d2f14c56f51034d39049d1c7e13c248180a865f Signed-off-by: Wojciech Dec <wdec@cisco.com>
2017-01-27IP Multicast FIB (mfib)Neale Ranns1-63/+71
- IPv[46] mfib tables with support for (*,G/m), (*,G) and (S,G) exact and longest prefix match - Replication represented via a new replicate DPO. - RPF configuration and data-plane checking - data-plane signals sent to listening control planes. The functions of multicast forwarding entries differ from their unicast conterparts, so we introduce a new mfib_table_t and mfib_entry_t objects. However, we re-use the fib_path_list to resolve and build the entry's output list. the fib_path_list provides the service to construct a replicate DPO for multicast. 'make tests' is added to with two new suites; TEST=mfib, this is invocation of the CLI command 'test mfib' which deals with many path add/remove, flag set/unset scenarios, TEST=ip-mcast, data-plane forwarding tests. Updated applications to use the new MIFB functions; - IPv6 NS/RA. - DHCPv6 unit tests for these are undated accordingly. Change-Id: I49ec37b01f1b170335a5697541c8fd30e6d3a961 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-10IPv6 NS RS tests and fixesNeale Ranns1-32/+10
includes Fix for VPP-584 with API change to remove prefix length from LL programming Change-Id: If860751c35e60255fb977f73bc33e8c2649e728e Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+4088
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>