Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: feature
- use tunnel_encap_decap_flags to control the copying of DSCP/ECN/etc
during IPSEC tunnel mode encap.
- use DSCP value to have fixed encap value.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: If4f51fd4c1dcbb0422aac9bd078e5c14af5bf11f
|
|
Type: improvement
type re-use.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ic2a2e6babf9ae66a1e53aec53a6cd157e1893dc8
|
|
Remove NAT's implementation of shallow virtual reassembly with
corresponding CLIs, APIs & tests. Replace with standalone shallow
virtual reassembly provided by ipX-sv-reass* nodes.
Type: refactor
Change-Id: I7e6c7487a5a500d591f6871474a359e0993e59b6
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: feature
- ip-neighbour: generic neighbour handling; APIs, DBs, event handling,
aging
- arp: ARP protocol implementation
- ip6-nd; IPv6 neighbor discovery implementation; separate ND,
MLD, RA
- ip6-link; manage link-local addresses
- l2-arp-term; events separated from IP neighbours, since they are not
the same.
vnet retains just enough education to perform ND/ARP packet
construction.
arp and ip6-nd to be moved to plugins soon.
Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I9467f11775936754406892b8e9e275f989ac9b30
|
|
Type: fix
Change-Id: I5a5461652f8115fa1270e20f748178fb5f5450f2
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: feature
- Define the ip_dscp_t and use in the IP headers
- Add DSCP setting to the DHCP client for use with packet TX
Change-Id: If220dde0017ea78793747d65f53e11daf23a28fa
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
please consult the new tunnel proposal at:
https://wiki.fd.io/view/VPP/IPSec
Type: feature
Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Two codes diverged in the packet processor
And sorry I could not use them both
Long I stood being but one developer
And studied one as far as I could
To where the code said bitwise OR
Then took the other, as just could see,
And having perhaps the better bit,
Because it followed the RFC
And used the cryptic XOR in C,
Had run them both a fair bit.
And both equally ran that morning
With packets dropped and flowing.
Oh, I flagged the first for dropping!
Yet knowing bug leads to debuging
I hoped I'd never be returning.
I shall be commiting this with a sigh
Somewhere ages and ages hence:
Two codes diverged by a bit, and I,
I made the packets flow on by,
And that has made all the difference.
Type: fix
Change-Id: If2698726d5501fde76211994f8efc37119345352
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Change-Id: I454bb01153d1d0536c4a6fe36103e7721aad8cd1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
use address_t and mac_address_t for IPv6 and ARP entries
and all other API calls in ip.api aprat from the route ones,
that will follow in a separate commit
Change-Id: I67161737c2184d3f8fc1e79ebd2b55121c5b0191
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I93c6b7bccd1a1ab71625ae29c99c974581186c4d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I4d1ab5ff0c8f0756e91bf63e045f88513bb7d039
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
- common types on the API
- endpoints keyed in various ways for DP lookup
- conparison functions for VPP IP address types
Change-Id: If7ec0bbc5cea71fd0983fe78987d147ec1bd7ec8
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I45b0c48e89cb1ea556c795f6163a8346f2e2e0da
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I3c714c519b6d0009329b50947ce250c18ee2a85a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ibea4a96bdec5e368301a03d8b11a0712fa0265e0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ie5a50def4ec1e4a3b3404a8b6ab9ec248bc16744
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I166301c9e2388bae5f70ec0179d663a2703e27f5
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
- support both pipe and uniform modes for all MPLS LSP
- all API programming for output-labels requires that the mode (and associated data) is specificed
- API changes in MPLS, BIER and IP are involved
- new DPO [sub] types for MPLS labels to handle the two modes.
Change-Id: I87b76401e996f10dfbdbe4552ff6b19af958783c
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- IPv6 link local table is a per-SW interface array of IPv6 unicast FIBs
- the per-interface ocst is sizeof(fib_table_t) which is small,
w.r.t. the cost of an interface
- FE80::/10 in the 'global' table points to a DPO that performs a lookup in the
input interface's LL fib.
Change-Id: Ice834b25ebeeacb2e929d7c864d7ec8c09918cbe
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: Ic5dcadd13c88b8a5e7896dab82404509c081614a
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I67839281623721bf42f0a918a53356143d9dc78a
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
and some refactoring
Change-Id: I99e3c5e782ce65cb9779ccc3a9a3151ef1429e07
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
1. Fix finding sr extension header
2. Fix for assert checks for space for sr header in packet headroom
3. ioam build warnings
4. Fix for SR header removal in presence of hbh ext header
clib_memcpy with overlapping src/dst was failing
Change-Id: I8576204eb571d1d4725a4e6976e18fe61cd1cd35
Signed-off-by: shwethab <shwetha.bhandari@gmail.com>
|
|
Multiple DHCP (4 and/or 6) servers can be added and removed through multiple calls to the 'set dhcp server' API.
All 4/6/ discover/solicit messages will then be replicated to all servers in the list. The expectation is that the servers/system is configured in such a way that this is viable.
If VSS information is providied for the clinet VRF which also has multiple servers configured, then the same VSS information is sent to each server. Likewise the source address of packets sent to from VPP to each server is the same.
Change-Id: I3287cb084c84b3f612b78bc69cfcb5b9c1f8934d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Implements:
1.- SR Policies with several (weighted) SID lists
2.- Binding SID
3.- SR LocalSIDs with support for the following functions
- End
- End.X
- End.DX6
- End.DX4
- End.DX2
- End.DT6
- End.DT2
- End.B6
- End.B6.Encaps
4.- SR Steering policies (to steer a traffic through an SR Policy)
- Support for IPv6 traffic (IPv6 Encapsulation / SRH insertion)
- Support for IPv4 traffic (IPv6 Encapsulation)
- Support for L2 traffic
(T.Insert / T.Encaps)
5.- Doxygen documentation
6.- Framework (APIs) to allow the definition of new SR LocalSID behaviors by means of plugins
7.- Sample SRv6 LocalSID plugin
Change-Id: I2de3d126699d4f11f54c0f7f3b71420ea41fd389
Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
|
|
Change-Id: I49e5ce0aae6e4ff634024387ceaf7dbc432a0351
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23
Signed-off-by: Damjan Marion <damarion@cisco.com>
|