aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/ip/ip_api.c
AgeCommit message (Collapse)AuthorFilesLines
2017-12-06UT: Repaired broken C unit tests (--enable-tests)Ole Troan1-9/+6
Change-Id: I63d720378b92813993525f80fee90fc79df27fba Signed-off-by: Ole Troan <ot@cisco.com>
2017-11-14Ip6 dump not showing fib table names (VPP-1063)Neale Ranns1-5/+6
Change-Id: Idc7e7c35f17d514589d1264f1d1be664192ee586 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-11-10Break up vpe.apiNeale Ranns1-1/+925
- makes the VAPI generated file more consumable. - VOM build times improve. Change-Id: I838488930bd23a0d3818adfdffdbca3eead382df Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-11-10Add sw_if_index to the ip_neighbor_details_t response.Jon Loeliger1-3/+6
When a DUMP with sw_if_index == ~0 is used to get all Neighbor entries for all interfaces, it is unclear in the details to which interface the neighbor belongs. Clear that up by returning the associated sw_if_index as well. Change-Id: Ib584a57138f7faceffed64d7c1854f7af92e0e42 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-11-09BIERNeale Ranns1-17/+26
- see draft-ietf-bier-mpls-encapsulation-10 - midpoint, head and tail functions - supported payload protocols; IPv4 and IPv6 only. Change-Id: I59d7363bb6fdfdce8e4016a68a9c8f5a5e5791cb Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-07UDP Encapsulation.Neale Ranns1-1/+12
A UDP-encap object that particiapates in the FIB graph and contributes DPO to teh output chain. It thereofre resembles a tunnel but without the interface. FIB paths (and henace routes) can then be created to egress through the UDP-encap. Said routes can have MPLS labels, hence this also allows MPLSoUPD. Encap is uni-directional. For decap, one still registers with the UDP port dispatcher. Change-Id: I23bd345523b20789a1de1b02022ea1148ca50797 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-07ip: add container proxy apiFlorin Coras1-1/+25
Change-Id: Id324a757517f85973097e20e2eb88d64ae0e931b Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-18VPP-930: add missing ntohl to send_ip6_fib_details(...)Dave Barach1-1/+1
Change-Id: I0c1671f3eaf2dad084e3ac9fb124c9ed78273f50 Signed-off-by: Dave Barach <dave@barachs.net>
2017-10-15Revert "Enforce FIB table creation before use"Florin Coras1-3/+34
This reverts commit f9342023c19887da656133e2688a90d70383b0c5. Reverting to unblock master. No idea why jjb +1ed this patch! On closer inspection it looks like it -1ed it and subsequently changed opinion. CSIT tests should be fixed before re-merging. Change-Id: I26608912a962c52083073e16c7c9d2cc44a3cc8d Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-14Source Lookup progammable via APINeale Ranns1-0/+5
Change-Id: I5d5d4f22b6369d504455a644f73076d772fbcfb4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-13Enforce FIB table creation before useNeale Ranns1-34/+3
last i the serise of the use of the FIB table create/delete API. VPP now forces the tables to have been explicitly creted before they are used. Change-Id: Ifde3b1bbb76697a01ab71bce4f5264e6d1725467 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-10punt and drop features:Neale Ranns1-0/+60
- new IPv4 and IPv6 feature arcs on the punt and drop nodes - new features: - redirect punted traffic to an interface and nexthop - police punted traffic. Change-Id: I53be8bf4e06545add8a3619e462de5ffedd0a95c Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-09IP neighbour move incorrectly placed jump labelNeale Ranns1-2/+2
Change-Id: I19fdf13a4848306ee3841d822b832cba96c5bce5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-05Distributed Virtual Router SupportNeale Ranns1-0/+5
A distributed virtual router works by attmpeting to switch a packet, but on failing to find a local consumer (i.e. the packet is destined to a locally attached host) then the packet is sent unmodified 'upstream' to where the rest of the 'distributed' router is present. When L3 switching a packet this means the L2 header must not be modifed. This patch adds a 'l2-bridge' object to the L3 FIB which re-injects packets from the L3 path back into the L2 path - use with extreme caution. Change-Id: I069724eb45956647d7980cbe40a80a788ee6ee82 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-19Treat label=0 as an invalid next-hop-via-labelNeale Ranns1-1/+7
Change-Id: I831226111d26f5c8a795e0773e23fddcddfb1613 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-13Add a name to the creation of an IP and MPLS tableNeale Ranns1-15/+17
Change-Id: I4b4648831551519b2ffb6f93255d28a4b8726c22 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-11FIB table add/delete APINeale Ranns1-22/+100
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-14FIB table add/delete API onlyNeale Ranns1-0/+10
commit only the addition of the .api definition and their invocation through VAT so CSIT can use it Change-Id: Id510f14b1ce007fe5e92120507ea34100652fc64 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-08L2 over MPLSNeale Ranns1-16/+22
[support for VPWS/VPLS] - switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths - VLIB nodes to handle pop/push of MPLS labels to L2 Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-01FIB path weight incorrect in dump (VPP-922)Neale Ranns1-3/+5
Change-Id: I655f41878ca3595681d0255782b0faba01c9824b Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-07-18FIB path preferenceNeale Ranns1-1/+5
Paths are given a preference, lowest value is 'best'. Only paths that are up are up contribute to fprwarding - that's unchanged. What's new is that of the path's that re up only those that have the best preference contribute. A poor man's primary and backup. It's not true primary/backup function because the FIB must converge before the lower preference paths are used. Change-Id: Ie4453c4a7b1094c6c2b51fe1594b8302103bb68e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-26IP Flow Hash Config fixesNeale Ranns1-2/+10
- the flow hash config is (and was) cached on the load-balance object so the fib_table_t struct is not used a switch time. Therefore changes to the table's flow hash config need to be propagated to all load-balances and hance all FIB entries in the table. - enable API for setting the IPv6 table flow hash config - use only the hash config in the fib_table_t object and not on the ipX_fib_t - add tests. Change-Id: Ib804c11162c6d4972c764957562c372f663e05d4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-07MPLS McastNeale Ranns1-39/+59
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-01MTRIE Optimisations 2Neale Ranns1-15/+28
1) 16-8-8 stride. Reduce trie depth walk traded with increased memory in the top PLY. 2) separate the vector of protocol-independent (PI) fib_table_t with the vector of protocol dependent (PD) FIBs. PD FIBs are large structures, we don't want to burn the memory for ech PD type 3) Go straight to the PD FIB in the data-path thus avoiding an indirection through, e.g., a PLY pool. Change-Id: I800d1ed0b2049040d5da95213f3ed6b12bdd78b7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-09IMplementation for option to not create a FIB table entry when adding a ↵Neale Ranns1-2/+4
neighbor entry Change-Id: I952039e101031ee6a06e63f4c73d8eb359423e1a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-08BUG: multiple registrations of 'vl_api_ip6nd_proxy_details_t_handlerNeale Ranns1-7/+0
Change-Id: I70e32b2196bfc8712d270f9a4365daca2504d52d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-08Proxy ND (RFC4389 - or a sub-set thereof). This allows the 'emulation' of ↵Neale Ranns1-0/+102
bridging. That is hosts in one sub-net reachable via differenet interfaces. Introducate a new API command: ip6 nd proxy <host-address> <interface> this indicates 2 things; 1) that host <host-address> is reachable out of interface <interface>. VPP will thus install that route. 2) NS requests sent to <host-address> will be responeded to (i.e. proxied). Change-Id: I863f967fdb5097ab3b574769c70afdbfc8d5478a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-02Clean up binary api message handler registration issuesDave Barach1-83/+0
Removed a fair number of "BUG" message handlers, due to conflicts with actual message handlers in api_format.c. Vpp itself had no business receiving certain messages, up to the point where we started building in relevant code from vpp_api_test. Eliminated all but one duplicate registration complaint. That one needs attention from the vxlan team since the duplicated handlers have diverged. Change-Id: Iafce5429d2f906270643b4ea5f0130e20beb4d1d Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-20Python test IP and MPLS objects conform to infra.Neale Ranns1-2/+252
Add IP[46] MFIB dump. Change-Id: I4a2821f65e67a5416b291e4912c84f64989883b8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-13Augment IP_DETAILS, IP_ADDRESS_DETAILS with a few context fields.Jon Loeliger1-5/+12
When handling the IP_DETAILS and IP_ADDRESS_DETAILS replies, it is almost certainly going to require having both the is_ipv6 and sw_if_index context to handle them properly. Placing these values in an essentially global location as the current VAT does isn't thread-safe. Fruthermore, rather than forcing every API user to hoop-jump to establish these context values, simply provide them in their DETAILS reply messages. Change-Id: I6a9e0cb16ecdbf87fca8fc5c7663e98d3a53c26c Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-01-27IP Multicast FIB (mfib)Neale Ranns1-0/+210
- IPv[46] mfib tables with support for (*,G/m), (*,G) and (S,G) exact and longest prefix match - Replication represented via a new replicate DPO. - RPF configuration and data-plane checking - data-plane signals sent to listening control planes. The functions of multicast forwarding entries differ from their unicast conterparts, so we introduce a new mfib_table_t and mfib_entry_t objects. However, we re-use the fib_path_list to resolve and build the entry's output list. the fib_path_list provides the service to construct a replicate DPO for multicast. 'make tests' is added to with two new suites; TEST=mfib, this is invocation of the CLI command 'test mfib' which deals with many path add/remove, flag set/unset scenarios, TEST=ip-mcast, data-plane forwarding tests. Updated applications to use the new MIFB functions; - IPv6 NS/RA. - DHCPv6 unit tests for these are undated accordingly. Change-Id: I49ec37b01f1b170335a5697541c8fd30e6d3a961 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-10IPv6 NS RS tests and fixesNeale Ranns1-2/+1
includes Fix for VPP-584 with API change to remove prefix length from LL programming Change-Id: If860751c35e60255fb977f73bc33e8c2649e728e Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+1196
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>