summaryrefslogtreecommitdiffstats
path: root/src/vnet/ip/lookup.c
AgeCommit message (Collapse)AuthorFilesLines
2018-05-30IPv6 for-us/receive multicast routes fixNeale Ranns1-0/+4
Change-Id: I5e29e16b4d45411b1a7c177b8d7156c5baefe6a1 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-17IP mcast: allow unicast address as a next-hopNeale Ranns1-0/+16
Change-Id: I5e679f2601e37688f2768620479dc2efb7d19ca3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-21reassembly: feature/concurrencyKlement Sekera1-2/+0
This change makes ip reassembly an interface feature, while adding concurrency support. Due to this, punt is no longer needed to test reassembly. Change-Id: I467669514ec33283ce935be0f1dd08f07684f0c7 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-16QoS recording and markingNeale Ranns1-1/+1
Change-Id: Ie5a50def4ec1e4a3b3404a8b6ab9ec248bc16744 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-02-16Allow providers to override glean behaviourNeale Ranns1-41/+0
and update glean address on local interface MAC change Change-Id: I530826d60c7e9db2b0fa2d45754139d82c5ea807 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-02-15Revert "Allow interface types to override glean adjacency behaivour"Ole Trøan1-0/+41
This reverts commit 8b30e471df4d42214619e1d6c50cc8298426b45f. Change-Id: I99edb236eb0a7f8ba3fba333c3481a710ebcb59c Signed-off-by: Ole Troan <ot@cisco.com>
2018-02-15Allow interface types to override glean adjacency behaivourNeale Ranns1-41/+0
update the glean adj on a local interface MAC change Change-Id: Ia5c5cde424ed0fea3431532cc5abf22b364bbab5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-02-01IPv4/6 reassemblyKlement Sekera1-0/+2
Change-Id: Ic5dcadd13c88b8a5e7896dab82404509c081614a Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-12-11call unformat_free in some flow, remove unnecessary callsSwarup Nayak1-4/+12
Change-Id: I565277eafbce3d4f59a7f0d497fca1c4fed3cfc8 Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
2017-11-18unformat function for FIB pathsNeale Ranns1-147/+6
Change-Id: I32de25890ac0a643314f650591d2479879d9a2a6 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-08ip: fix container proxy coverity warningFlorin Coras1-4/+7
Change-Id: I5e35921acb65157a3de8ea0c53b3a6fa5cfca044 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-11-07UDP Encapsulation.Neale Ranns1-1/+8
A UDP-encap object that particiapates in the FIB graph and contributes DPO to teh output chain. It thereofre resembles a tunnel but without the interface. FIB paths (and henace routes) can then be created to egress through the UDP-encap. Said routes can have MPLS labels, hence this also allows MPLSoUPD. Encap is uni-directional. For decap, one still registers with the UDP port dispatcher. Change-Id: I23bd345523b20789a1de1b02022ea1148ca50797 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-07ip: add container proxy apiFlorin Coras1-19/+120
Change-Id: Id324a757517f85973097e20e2eb88d64ae0e931b Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-25L3 proxy FIB source for container networkingAndrew Yourtchenko1-0/+79
Change-Id: I4164c4c19c8dbfd73e6ddf94a12056325cc093b9 Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-10-03Propagate duplicate IF addr add/del error up to API.Jon Loeliger1-1/+11
Identify and complain when the same IP prefix is assigned to two different SW interfaces: vpp# set int ip address TenGigabitEthernet6/0/0 1.2.3.4/32 vpp# set int ip address TenGigabitEthernet6/0/1 1.2.3.4/32 set interface ip address: Prefix 1.2.3.4/32 already found on interface TenGigabitEthernet6/0/0 Change-Id: I1aee1b6a7ddd00d3109a53d8e1b6ce97bf45e372 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-09-13Add a name to the creation of an IP and MPLS tableNeale Ranns1-1/+4
Change-Id: I4b4648831551519b2ffb6f93255d28a4b8726c22 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-11FIB table add/delete APINeale Ranns1-0/+225
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-19Fixed ip add bug for ip6 with review commentspragash1-4/+4
Change-Id: Ie1fba1a32020775444c7b1ed800e8559b54691ff Signed-off-by: pragash <pxv3620@rit.edu>
2017-08-09Allow multiple MPLS output labels to be passed on the CLINeale Ranns1-3/+10
Change-Id: Ib5af105e32b6b0df86923e189ab6bf6ee59de5b9 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-08L2 over MPLSNeale Ranns1-9/+9
[support for VPWS/VPLS] - switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths - VLIB nodes to handle pop/push of MPLS labels to L2 Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-07-18FIB path preferenceNeale Ranns1-20/+11
Paths are given a preference, lowest value is 'best'. Only paths that are up are up contribute to fprwarding - that's unchanged. What's new is that of the path's that re up only those that have the best preference contribute. A poor man's primary and backup. It's not true primary/backup function because the FIB must converge before the lower preference paths are used. Change-Id: Ie4453c4a7b1094c6c2b51fe1594b8302103bb68e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-19mfib CLI bugs (VPP-852)Neale Ranns1-0/+2
Change-Id: I1b71010e20742eee02693d672e24c85897e37759 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-02Allow local/for-us replications for IP multicast routes on the CLINeale Ranns1-1/+6
Change-Id: I046d9402b79fdbc6a6663199ffff8e40a278fd51 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-11Remove usued, redundant and deprecated code from lookup.hNeale Ranns1-32/+3
Change-Id: Ic16bc10d0b2877b2afdf052615f9334f31b9519f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-07MPLS McastNeale Ranns1-1/+2
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-07VPP-684.Add ip which mask length exceeding upper limit,ping segmentfaultflyingeagle231-1/+4
Change-Id: I2d1c5e4dbdcab2a81d6c88801183ca0bbc83e1d9 Signed-off-by: flyingeagle23 <wang.hui56@zte.com.cn>
2017-04-03Adjacency layout change and move to vnet/adjNeale Ranns1-8/+2
Change-Id: I03195a86c69f84a301051c6b3ab64456bbf28645 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-17Cache a 'has-features' flag on the adjacency for faster access. Reclaim the ↵Neale Ranns1-5/+3
node_index memeber from the rewrite for space - this is only used for formtting before: ip4-rewrite * * * * 2.66e1 256.00 after: ip4-rewrite * * * * 2.40e1 256.00 Change-Id: Ic397150727cad38811564777419ad6bd26b8a3a6 Signed-off-by: Neale Ranns <nranns@wasa-ucs-11.cisco.com>
2017-03-08ARP resilience in the absence of IP config on input and output interfacesNeale Ranns1-0/+15
Change-Id: Ia9c6790436f8f6337b5351e3017ef5e441a8a4e9 Signed-off-by: Neale Ranns <nranns@cisco.com> (cherry picked from commit 5e323329ed6ded6f6944c56069329207ad9069c0)
2017-03-08Proxy ND (RFC4389 - or a sub-set thereof). This allows the 'emulation' of ↵Neale Ranns1-0/+1
bridging. That is hosts in one sub-net reachable via differenet interfaces. Introducate a new API command: ip6 nd proxy <host-address> <interface> this indicates 2 things; 1) that host <host-address> is reachable out of interface <interface>. VPP will thus install that route. 2) NS requests sent to <host-address> will be responeded to (i.e. proxied). Change-Id: I863f967fdb5097ab3b574769c70afdbfc8d5478a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-22VPP-635: CLI Memory leak with invalid parameterBilly McFall1-11/+23
In the CLI parsing, below is a common pattern: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else return clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); } unformat_free (line_input); The 'else' returns if an unknown string is encountered. There a memory leak because the 'unformat_free(line_input)' is not called. There is a large number of instances of this pattern. Replaced the previous pattern with: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else { error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); goto done: } } /* ...Remaining code... */ done: unformat_free (line_input); return error; } In multiple files, 'unformat_free (line_input);' was never called, so there was a memory leak whether an invalid string was entered or not. Also, there were multiple instance where: error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); used 'input' as the last parameter instead of 'line_input'. The result is that output did not contain the substring in error, instead just an empty string. Fixed all of those as well. There are a lot of file, and very mind numbing work, so tried to keep it to a pattern to avoid mistakes. Change-Id: I8902f0c32a47dd7fb3bb3471a89818571702f1d2 Signed-off-by: Billy McFall <bmcfall@redhat.com> Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-20CLI extension to add multiple (S,G)s at once and time itNeale Ranns1-10/+76
Change-Id: Id17060fd0e8ac80c8cf1999b0b82d0241b3b969a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-27IP Multicast FIB (mfib)Neale Ranns1-0/+171
- IPv[46] mfib tables with support for (*,G/m), (*,G) and (S,G) exact and longest prefix match - Replication represented via a new replicate DPO. - RPF configuration and data-plane checking - data-plane signals sent to listening control planes. The functions of multicast forwarding entries differ from their unicast conterparts, so we introduce a new mfib_table_t and mfib_entry_t objects. However, we re-use the fib_path_list to resolve and build the entry's output list. the fib_path_list provides the service to construct a replicate DPO for multicast. 'make tests' is added to with two new suites; TEST=mfib, this is invocation of the CLI command 'test mfib' which deals with many path add/remove, flag set/unset scenarios, TEST=ip-mcast, data-plane forwarding tests. Updated applications to use the new MIFB functions; - IPv6 NS/RA. - DHCPv6 unit tests for these are undated accordingly. Change-Id: I49ec37b01f1b170335a5697541c8fd30e6d3a961 Signed-off-by: Neale Ranns <nranns@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+967
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>