Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Change-Id: I69f7e23b23e8cfcfe57ba019862470e0eb4b06db
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
When computing the inner packet checksum, the code wrongly
assumes that the IP version of the inner packet is the
same of the outer one. On the contrary, it is perfectly
possible to encapsulate v6 packets into v4 and viceversa,
so we need to check the IP format of the inner header before
calling vnet_calc_checksums_inline.
Ticket: VPP-2020
Type: fix
Signed-off-by: Mauro Sardara <msardara@cisco.com>
Change-Id: Ia4515563c164f6dd5096832c831a48cb0a29b3ad
Signed-off-by: Mauro Sardara <msardara@cisco.com>
|
|
Type: improvement
This also makes the is_white_space function
public
Change-Id: Ifc1c0d4509f3ecae14f09bb5fa7a2eea33c49b09
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
fib_table->ft_locks
name string for parsing the ip table add|del name <tag> command
path list for ip4_specials in mfib
mfib->fib_entry_by_dst_address[0..32]
mfib entry path_ext, msrc->mfes_exts
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ia1e0cac577a73608ee1e4b1664b60a66322e81ce
|
|
When an mfib entry was created with both paths and entry_flags then
the entry flags were being ignored. If there are no paths then the
flags were passed into mfib_table_entry_update, but in the case where
the entry didn't exist and there were paths and flags, the entry was
created within mfib_table_entry_paths_update() which used a default
of MFIB_ENTRY_FLAG_NONE.
Pass the flags through into the mfib_table_entry_paths_update fn. All
existing callers other than the create case will now pass in
MFIB_ENTRY_FLAG_NONE.
Type: fix
Signed-off-by: Paul Atkins <patkins@graphiant.com>
Change-Id: I256375ba2fa863a62a88474ce1ea6bf2accdd456
|
|
Using VPP CLI "ip route add" to add static IPv6 entries outputs wrong
results. Fix this error by correctly calculating IPv6 addresses with
different increased ranges and grouping ip4/ip6 prefix calculation
functionality into two functions.
Type: fix
Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com>
Reviewed-by: Lijian Zhang <lijian.zhang@arm.com>
Reviewed-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: If954876301ca2095f9331799a086f75db936f246
|
|
This patches fixes an issue that could cause
fib locks to underflow: if an API user deletes
a fib and quickly recreates it, the fib may not
have been actually deleted. As a result, the
lock would not be incremented on the create call
leading to the fib potentially disappearing
afterwards - or to the lock to underflow when
the fib is deleted again.
In order to keep the existing API semantics,
we use the locks with API and CLI source as flags.
This means we need to use a different counter
for the interface-related locks.
This also prevents an issue where an interface being
bound to a vrf via API and released via CLI could
mess up the lock counter.
Finally, this will help with cleaning up the
interface-related locks on interface deletion
in a later patch.
Type: fix
Change-Id: I93030a7660646d6dd179ddf27fe4e708aa11b90e
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
Set tableID = ~0 for auto selection unused ID
https://jira.fd.io/browse/VPP-1993
Type: improvement
Change-Id: I4eec2cc1d18fc025196cb6ac4c9a4b374388eb56
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
Type: feature
Thought this might be useful when using
many VRF to get the list of allocated
VRFs and corresponding names
Change-Id: If9d2c6612d4215e7576315d66d1eb130fcecfa13
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
extends ip6_compute_flow_hash() to include IPv6 flowlabel in flowhash computation
Type: improvement
Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com>
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: Id1aaa20c9dac729c22b714eea1cdd6e9e4d1f75e
|
|
Type: refactor
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: Id1801519638a9b97175847d7ed58824fb83433d6
|
|
Make sure payload_proto variable is set properly in vnet_ip_mroute_cmd()
function. This avoids using an uninitialized payload_proto value which
could lead to assertion failure when using e.g. the ip mroute add
command.
Type: fix
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
Change-Id: I8b1d1df02e80150836b7b0448814d8f99747eeed
|
|
Type: feature
- replace functions for prefixes attached to interfaces
- add ip_interface.[ch] to consoldate the functions
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I9c0c39c09dbf80ea1aadefee02c9bd16f094b6ad
|
|
Type: fix
it was marked MP safe in the CLI (which it shouldn't be) but
it it not marked MP safe on the API.
Change-Id: I4bdea498a510a8b406d13d62a899b6d03656f7e8
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
- ip-neighbour: generic neighbour handling; APIs, DBs, event handling,
aging
- arp: ARP protocol implementation
- ip6-nd; IPv6 neighbor discovery implementation; separate ND,
MLD, RA
- ip6-link; manage link-local addresses
- l2-arp-term; events separated from IP neighbours, since they are not
the same.
vnet retains just enough education to perform ND/ARP packet
construction.
arp and ip6-nd to be moved to plugins soon.
Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
if the packet is about to be fragmented, then don't call any of the
actions that expect the rewrite to have been written.
1) don't double count packets thru the adjacency (original & fragments)
2) don't double decrement the TTL for fragments
3) return to ip4-midchain post ip-frag if that's where we started.
4) only run midchain/mcast fixups if not fragmenting (if no errors)
Change-Id: Ib2866787a42713ee5871b87b597d8f74b901044b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: style
Change-Id: I7d44b7fab1b8b196e4934cb4832ee51084c5bf98
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Change-Id: I7ed9726d8c5ca26715a84b004a18fd7f93142486
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I6fd7bb27b95a50d37424f65dc51e8b341f8b1b28
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
In some cases, we can refer to no-longer adjacencies (eg. in traces). Do
not dump them in this case as they are probably incorrect (memory can be
reused).
Type: fix
Change-Id: Ib653ba066bb6595ec6ec37d313a3124bce0eeed3
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Adding a prefix to an interface was not permitted if it overlapped
with another prefix on an interface which used the same FIB.
Loosen the restriction. Allow 2 or more addresses from the same
prefix on a single interface. Reference count the prefix to figure
out when a glean/connected route for the prefix needs to be added
or removed.
Added unit tests to check that the route is only removed when all
addresses in the prefix are removed from the interface.
Change-Id: I1a962ecb5e1ee65fc6d41f98a4cc097a51a55321
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Enhance the route add/del APIs to take a set of paths rather than just one.
Most unicast routing protocols calcualte all the available paths in one
run of the algorithm so updating all the paths at once is beneficial for the client.
two knobs control the behaviour:
is_multipath - if set the the set of paths passed will be added to those
that already exist, otherwise the set will replace them.
is_add - add or remove the set
is_add=0, is_multipath=1 and an empty set, results in deleting the route.
It is also considerably faster to add multiple paths at once, than one at a time:
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11
100000 routes in .572240 secs, 174751.80 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12
100000 routes in .528383 secs, 189256.54 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13
100000 routes in .757131 secs, 132077.52 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14
100000 routes in .878317 secs, 113854.12 routes/sec
vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14
100000 routes in .900212 secs, 111084.93 routes/sec
Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
use address_t and mac_address_t for IPv6 and ARP entries
and all other API calls in ip.api aprat from the route ones,
that will follow in a separate commit
Change-Id: I67161737c2184d3f8fc1e79ebd2b55121c5b0191
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I7cf3ae8c10dd584e8bc234a3253bea3c5a2d105a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I3cb89dbfb7174b9913a8c4ad9b3b1dc9f6ed6326
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I221cebddc45efbfdec428b7df2af96e2aedff2dd
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I8dc6230b65e57ddc07f974bf6726393d8dbfd4a2
Signed-off-by: Yichen Wang <yicwang@cisco.com>
|
|
Change-Id: I12fbebd1d24c37dc77c147773ea522c8a4b7b99d
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I5e29e16b4d45411b1a7c177b8d7156c5baefe6a1
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I5e679f2601e37688f2768620479dc2efb7d19ca3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This change makes ip reassembly an interface feature, while adding
concurrency support. Due to this, punt is no longer needed to test
reassembly.
Change-Id: I467669514ec33283ce935be0f1dd08f07684f0c7
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: Ie5a50def4ec1e4a3b3404a8b6ab9ec248bc16744
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
and update glean address on local interface MAC change
Change-Id: I530826d60c7e9db2b0fa2d45754139d82c5ea807
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
This reverts commit 8b30e471df4d42214619e1d6c50cc8298426b45f.
Change-Id: I99edb236eb0a7f8ba3fba333c3481a710ebcb59c
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
update the glean adj on a local interface MAC change
Change-Id: Ia5c5cde424ed0fea3431532cc5abf22b364bbab5
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ic5dcadd13c88b8a5e7896dab82404509c081614a
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I565277eafbce3d4f59a7f0d497fca1c4fed3cfc8
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
Change-Id: I32de25890ac0a643314f650591d2479879d9a2a6
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I5e35921acb65157a3de8ea0c53b3a6fa5cfca044
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
A UDP-encap object that particiapates in the FIB graph and contributes
DPO to teh output chain. It thereofre resembles a tunnel but without the
interface. FIB paths (and henace routes) can then be created to egress
through the UDP-encap. Said routes can have MPLS labels, hence this also
allows MPLSoUPD.
Encap is uni-directional. For decap, one still registers with the UDP port
dispatcher.
Change-Id: I23bd345523b20789a1de1b02022ea1148ca50797
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Id324a757517f85973097e20e2eb88d64ae0e931b
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I4164c4c19c8dbfd73e6ddf94a12056325cc093b9
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Identify and complain when the same IP prefix is assigned
to two different SW interfaces:
vpp# set int ip address TenGigabitEthernet6/0/0 1.2.3.4/32
vpp# set int ip address TenGigabitEthernet6/0/1 1.2.3.4/32
set interface ip address: Prefix 1.2.3.4/32 already found on
interface TenGigabitEthernet6/0/0
Change-Id: I1aee1b6a7ddd00d3109a53d8e1b6ce97bf45e372
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Change-Id: I4b4648831551519b2ffb6f93255d28a4b8726c22
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
part 2;
- this adds the code to create an IP and MPLS table via the API.
- but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass.
Change-Id: Id124d884ade6cb7da947225200e3bb193454c555
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ie1fba1a32020775444c7b1ed800e8559b54691ff
Signed-off-by: pragash <pxv3620@rit.edu>
|
|
Change-Id: Ib5af105e32b6b0df86923e189ab6bf6ee59de5b9
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
[support for VPWS/VPLS]
- switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths
- VLIB nodes to handle pop/push of MPLS labels to L2
Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Paths are given a preference, lowest value is 'best'. Only paths that are up are up contribute to fprwarding - that's unchanged. What's new is that of the path's that re up only those that have the best preference contribute. A poor man's primary and backup. It's not true primary/backup function because the FIB must converge before the lower preference paths are used.
Change-Id: Ie4453c4a7b1094c6c2b51fe1594b8302103bb68e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|