aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/ip6-nd
AgeCommit message (Collapse)AuthorFilesLines
2023-02-08ip6-nd: support dump/details for IPv6 RAAlexander Chernavin5-98/+470
Type: improvement With this change, add support for dumping IPv6 Router Advertisements details on a per-interface basis (or all). Also, cover that with a test. Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: I89fa93439d33cc36252377f27187b18b3d30a1d4
2022-11-06ip6-nd: set router flag on NA if appropriateMatthew Smith3-1/+19
Type: fix The router flag on a neighbor advertisement can be used by neighbors to detect that a router has changed to a host (RFC 4861 section 4.4). If a neighbor adds routes after receiving a router advertisement sent by VPP and subsequently receives a neighbor advertisement sent by VPP, it may remove any routes it added based on the RA if the NA does not have the router flag set. It appears that this is how windows behaves. When sending a neighbor advertisement, set the router flag if sending RAs is enabled on the interface. Signed-off-by: Matthew Smith <mgsmith@netgate.com> Change-Id: I1f3e42bbd8ea1a4c116b1ce5a8273652d4cd763d
2022-11-05ip6-nd: initialize radv_info->send_radv to 1Dave Barach1-0/+3
Otherwise, the newly configured interface will never send RADV's. See below. In the typical case, suppress = 0 and is_no = 0, which propagates the current value of radv->send_radv: radv_info->send_radv = (suppress != 0) ? ((is_no != 0) ? 1 : 0) : radv_info->send_radv; No other bit of code will set send_radv, at least in straightforward ways. Type:fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: If9368155f7676460ca1f87729c2b3c453405d08d
2022-09-26api: replace print functions wth formatDamjan Marion1-2/+0
Type: improvement Change-Id: I7f7050c19453a69a7fb6c5e62f8f57db847d9144 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-08-09ip-neighbor: ARP and ND stats per-interface.Neale Ranns2-3/+17
Type: feature stats of the like from: https://datatracker.ietf.org/doc/html/draft-ietf-rtgwg-arp-yang-model-03#section-4 Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Icb1bf4f6f7e6ccc2f44b0008d4774b61cae96184
2022-07-29ip6-nd: fix ip6 ra cli issueTakanori Hirano1-2/+1
Fix parse problem with per-prefix settings (e.g. valid-lifetime) in ip6 ra. Type: fix Signed-off-by: me@hrntknr.net Change-Id: I2a00bf5b9621ebc16211227d70e376fc2f61bae1
2022-07-28ip6-nd: copy mac address to wrong buffer current_dataliangrq1-0/+2
Type: fix Receive router solicitation in pop vlan interface, it will cause copy mac address to wrong buffer current_data and can not reply the solicitation right Signed-off-by: liangrq <liangrq@efly.cc> Change-Id: Ic40a5a47a52c8187aaf6c6854df761529e6f24d9
2022-03-24ip6-nd: stop sending RA by defaultAlexander Chernavin1-3/+0
Type: improvement Currently, RA message sending is enabled by default - both periodic and in response to RS message. However, RFC 4861 section 6.2.1 says the following: Note that AdvSendAdvertisements MUST be FALSE by default so that a node will not accidentally start acting as a router unless it is explicitly configured by system management to send Router Advertisements. With this change, RA message sending is disabled by default and "test_ip6.TestIPv6.test_rs" updated appropriately. Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: I2a8865199cb665c59268504aefe2976e5ee96dc2
2022-02-15tcp: Do not include the tcp_packet.h file in the ip4_packet.hNeale Ranns1-0/+1
Type: refactor IP4 does not depend on TCP (it's the other way around). This upside down dependency leads to some nasty circular includes when trying to use ip46_address.h in interface.h Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I4a1bd21543b08b9c1cf1e5563da738414734a878
2022-01-24ip6-nd: fix coverity warningKlement Sekera1-6/+3
Restructure code to avoid NULL dereference. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: If3a4319f1b93af272b7b315a9b15ba4ee1f8e7ae
2021-10-14ip6-nd: fix coverity warningKlement Sekera1-0/+4
Add a missing return statement in case there are no parameters supplied to 'set ip6 nd proxy' CLI to avoid calling code with uninitialised parameters. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: Ie4fdb4df5d1af49471c421e5e7a6c2f885d2e8d2
2021-10-06docs: vnet comment nitfixesNathan Skrzypczak1-27/+41
Type: improvement Change-Id: Iac01d7830b53819ace8f199554be10ab89ecdb97 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-09-27misc: api move continuedFlorin Coras1-1/+1
Move control ping and change dependencies from vpe.api_types to memclnt.api_types Type: refactor Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I9f8bc442e28738c48d64d1f6794082c8c4f5725b
2021-09-27misc: move part of vpe apis to vlibmemoryFlorin Coras1-0/+6
VPE apis are actually vlib apis. This moves those that are not tightly coupled with vapi to vlib_api Type: refactor Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I456a64ce49a0cdeff4a0931c6ea513cb639f683e Signed-off-by: Ole Troan <ot@cisco.com>
2021-09-16ip6-nd: add ip6-nd proxyMohsin Kazmi5-2/+450
Type: feature Change-Id: I91f72f5802db195d1a15424d67c1b6e518168f9f Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-08-11fib: A 16-8-8 and a 8-8-8-8 versions of an ip4_fib_tNeale Ranns1-8/+6
Type: feature The difference being the MTRIE type they contain. THE FIB continues to use the 16-8-8 version. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I5a54d4e6e6cc639f18a3fb65ef2925507a7ef1de
2021-08-09ip6-nd: only respond to RS if sending RA is enabledOle Troan1-1/+6
Even when periodic RAs are disabled VPP would respond to router solicitations. Making it impossible to have an IPv6 enabled interface with hosts connected to it without VPP acting as a default router. This change drops RS messages if the radv_info->send_radv is off. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I9a68f8e12c93c1c00125b54f8fd454f48fa22caa Signed-off-by: Ole Troan <ot@cisco.com>
2021-07-16ip6-nd: refactor neighbour advertisement codeMohsin Kazmi2-61/+104
Type: refactor Refactor neighbour advertisement code into inline function to be used solely in feature nodes. Change-Id: I1e84c54f9807b4e3d90c37526c78a7afcb0ba087 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-05-01vlib: refactor trajectory trace debug featureBenoît Ganne1-1/+0
trajectory trace has been broken for a while because we used to save the buffer trajectory in a vector pointed to in opaque2. This does not work well when opaque2 is copied (eg. because of a clone) as 2 buffers end up sharing the same vector. This dedicates a full cacheline in the buffer metadata instead when trajectory is compiled in. No dynamic allocation, no sharing, no tears. Type: refactor Change-Id: I6a028ca1b48d38f393a36979e5e452c2dd48ad3f Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-04-05ip6-nd: Solicitation reply only if target is our link-localNeale Ranns1-4/+9
Type: fix The fib source IP6_ND is used for all link-local entries, hence solicitation responses were sent for a peer's address. Constrain the source check to also in clude the LOCAL flag, which indicates that the link-local address is ours. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Iba7e66049e4d89ee3f36d77aeb09310b978d70de
2021-03-26vlib: introduce vlib_get_elog_main()Damjan Marion1-3/+4
Type: improvement Change-Id: I73383eb15186021cd6527d112da8443a0082f129 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-12-14misc: move to new pool_foreach macrosDamjan Marion4-54/+54
Type: refactor Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-11-20ip-neighbor: Use ip_address_t rather than ip46_address_tNeale Ranns3-7/+20
Type: improvement Change-Id: Ica5f395075677bda5f38d28e704f65350af88610 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-11-13ethernet: mac must support 64-bits loadsBenoît Ganne3-5/+5
ethernet dataplane loads MAC addresses as 64-bits loads for efficiency. We must make sure it is valid, especially for the vector of secondary MACs. Type: fix Change-Id: I851e319b8a973c154e85ff9f05f3b8e385939788 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-11-10ip6-nd: fix memory leaksDave Barach1-11/+23
Quite a noticeable amount of memory. Recoded ra event tx and rx fns in the usual manner, which terminated the leaks. Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I486d348456b465ad3940a280d4cf489e8dd655a5
2020-10-19ip: Move the IP6 fib into ip6_[m]fib.cNeale Ranns1-1/+2
Type: improvement reduce the compile time by moving the bihash includes out of ip[46].h Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I6b9216e10aff1013071f9238b3e1ebbdd205bd80
2020-06-23ip6-nd: punt neighbor advertisementsAlexander Chernavin1-1/+1
With this change, punt received neighbor advertisements instead of drop in order to give other elements of the system an opportunity to handle them. Type: improvement Change-Id: Ie6cde9eebc83e42029967141cb32ebc459fd3680 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2020-06-17ip-neighbor: fix MLD hash key using stack pointerBenoît Ganne1-2/+2
Use pointed value (ipv6 address) as hash key instead of pointer value (pointer to ipv6 address on the stack). Type: fix Change-Id: I74a8b6d4bb552b5b344bcb50c8e830700c4ce739 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-05-17ip6-nd: correct set-ip6-nd-proxy CLI short_helpIgnas Bacius1-1/+1
Type: fix Signed-off-by: Ignas Bacius <ignas@noia.network> Change-Id: Id99a15272f6f12a724a4cfd9de461f1aa6a6a634
2020-04-24ip: Setting the Link-Local address from the API enables IPv6 on theNeale Ranns1-2/+2
interface Type: fix Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I0b7c189006e30a357cd6be4f3c9c61fded4157cb
2020-04-08misc: check return values from vlib_buffer_copy(...)Dave Barach1-0/+3
vlib_buffer_copy(...) returns NULL if the system is temporarily out of buffers. This is NOT correct. Please don't be this person: c0 = vlib_buffer_copy (vm, p0); ci0 = vlib_get_buffer_index (vm, c0); Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ic25ef58965871ea5d2b40904df9506803f69e47e
2020-02-26ip-neighbor: fix ip6_ra_cmdDave Barach1-10/+0
The option parsing loop had "break" statements included in each 'if (unformat (line_input, "this-option ...") option_values=xxx;' statement. Result: the code would silently ignore all but the first option. Probably broken forever, not easy to spot because the code looks OK even though it's badly broken. Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I667bee85b4ca654b53fb3af421f957957ed0f0f8
2020-02-21dhcp: update secondary radv_info structuresDave Barach2-5/+75
For details, see the Jira ticket below. Fix gerrit 23350. Type: fix Fixes: 28a6eb7 Ticket: VPP-1840 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ic9248734bb330eadb302f8410e8db9c64723f075
2020-02-10ip-neighbor: fix MLD reports not being sentNeale Ranns1-3/+3
Type: fix Change-Id: I8f81cd6c29ff8cb4f0b4850b8b1f6611d89ddb38 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-01-09misc: fix feature description spellingOle Troan1-3/+3
Type: docs Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I46856db81d42c3f10c03a7bf9a245cc998cd8a01
2020-01-05ip6-nd: Add FEATURE.yamlNeale Ranns1-0/+12
Type: docs Change-Id: I907f2c7f5d73dd88b16a6ff78ef072e13af9739e Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-17ip: Protocol Independent IP NeighborsNeale Ranns13-0/+5256
Type: feature - ip-neighbour: generic neighbour handling; APIs, DBs, event handling, aging - arp: ARP protocol implementation - ip6-nd; IPv6 neighbor discovery implementation; separate ND, MLD, RA - ip6-link; manage link-local addresses - l2-arp-term; events separated from IP neighbours, since they are not the same. vnet retains just enough education to perform ND/ARP packet construction. arp and ip6-nd to be moved to plugins soon. Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe Signed-off-by: Neale Ranns <nranns@cisco.com>