Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
The router flag on a neighbor advertisement can be used by neighbors to
detect that a router has changed to a host (RFC 4861 section 4.4).
If a neighbor adds routes after receiving a router advertisement sent
by VPP and subsequently receives a neighbor advertisement sent by VPP,
it may remove any routes it added based on the RA if the NA does not
have the router flag set. It appears that this is how windows behaves.
When sending a neighbor advertisement, set the router flag if sending
RAs is enabled on the interface.
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Change-Id: I1f3e42bbd8ea1a4c116b1ce5a8273652d4cd763d
|
|
Otherwise, the newly configured interface will never send RADV's.
See below. In the typical case, suppress = 0 and is_no = 0, which
propagates the current value of radv->send_radv:
radv_info->send_radv =
(suppress != 0) ? ((is_no != 0) ? 1 : 0) : radv_info->send_radv;
No other bit of code will set send_radv, at least in straightforward
ways.
Type:fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: If9368155f7676460ca1f87729c2b3c453405d08d
|
|
Type: improvement
Change-Id: I7f7050c19453a69a7fb6c5e62f8f57db847d9144
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
stats of the like from:
https://datatracker.ietf.org/doc/html/draft-ietf-rtgwg-arp-yang-model-03#section-4
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Icb1bf4f6f7e6ccc2f44b0008d4774b61cae96184
|
|
Fix parse problem with per-prefix settings (e.g. valid-lifetime)
in ip6 ra.
Type: fix
Signed-off-by: me@hrntknr.net
Change-Id: I2a00bf5b9621ebc16211227d70e376fc2f61bae1
|
|
Type: fix
Receive router solicitation in pop vlan interface, it will cause copy mac address to wrong buffer current_data and can not reply the solicitation right
Signed-off-by: liangrq <liangrq@efly.cc>
Change-Id: Ic40a5a47a52c8187aaf6c6854df761529e6f24d9
|
|
Type: improvement
Currently, RA message sending is enabled by default - both periodic and
in response to RS message. However, RFC 4861 section 6.2.1 says the
following:
Note that AdvSendAdvertisements MUST be FALSE by default so that a
node will not accidentally start acting as a router unless it is
explicitly configured by system management to send Router
Advertisements.
With this change, RA message sending is disabled by default and
"test_ip6.TestIPv6.test_rs" updated appropriately.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I2a8865199cb665c59268504aefe2976e5ee96dc2
|
|
Type: refactor
IP4 does not depend on TCP (it's the other way around).
This upside down dependency leads to some nasty circular includes when trying to use ip46_address.h in interface.h
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I4a1bd21543b08b9c1cf1e5563da738414734a878
|
|
Restructure code to avoid NULL dereference.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: If3a4319f1b93af272b7b315a9b15ba4ee1f8e7ae
|
|
Add a missing return statement in case there are no parameters supplied
to 'set ip6 nd proxy' CLI to avoid calling code with uninitialised
parameters.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ie4fdb4df5d1af49471c421e5e7a6c2f885d2e8d2
|
|
Type: improvement
Change-Id: Iac01d7830b53819ace8f199554be10ab89ecdb97
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Move control ping and change dependencies from vpe.api_types to
memclnt.api_types
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9f8bc442e28738c48d64d1f6794082c8c4f5725b
|
|
VPE apis are actually vlib apis. This moves those that are not tightly
coupled with vapi to vlib_api
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I456a64ce49a0cdeff4a0931c6ea513cb639f683e
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: feature
Change-Id: I91f72f5802db195d1a15424d67c1b6e518168f9f
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
The difference being the MTRIE type they contain.
THE FIB continues to use the 16-8-8 version.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I5a54d4e6e6cc639f18a3fb65ef2925507a7ef1de
|
|
Even when periodic RAs are disabled VPP would respond to
router solicitations. Making it impossible to have an IPv6
enabled interface with hosts connected to it without VPP
acting as a default router.
This change drops RS messages if the radv_info->send_radv is
off.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I9a68f8e12c93c1c00125b54f8fd454f48fa22caa
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: refactor
Refactor neighbour advertisement code into inline function
to be used solely in feature nodes.
Change-Id: I1e84c54f9807b4e3d90c37526c78a7afcb0ba087
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
trajectory trace has been broken for a while because we used to save the
buffer trajectory in a vector pointed to in opaque2. This does not work
well when opaque2 is copied (eg. because of a clone) as 2 buffers end up
sharing the same vector.
This dedicates a full cacheline in the buffer metadata instead when
trajectory is compiled in. No dynamic allocation, no sharing, no tears.
Type: refactor
Change-Id: I6a028ca1b48d38f393a36979e5e452c2dd48ad3f
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
The fib source IP6_ND is used for all link-local entries, hence
solicitation responses were sent for a peer's address. Constrain the
source check to also in clude the LOCAL flag, which indicates that the
link-local address is ours.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Iba7e66049e4d89ee3f36d77aeb09310b978d70de
|
|
Type: improvement
Change-Id: I73383eb15186021cd6527d112da8443a0082f129
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: Ica5f395075677bda5f38d28e704f65350af88610
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
ethernet dataplane loads MAC addresses as 64-bits loads for efficiency.
We must make sure it is valid, especially for the vector of secondary
MACs.
Type: fix
Change-Id: I851e319b8a973c154e85ff9f05f3b8e385939788
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Quite a noticeable amount of memory. Recoded ra event tx and rx fns in
the usual manner, which terminated the leaks.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I486d348456b465ad3940a280d4cf489e8dd655a5
|
|
Type: improvement
reduce the compile time by moving the bihash includes out of ip[46].h
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I6b9216e10aff1013071f9238b3e1ebbdd205bd80
|
|
With this change, punt received neighbor advertisements instead of drop
in order to give other elements of the system an opportunity to handle
them.
Type: improvement
Change-Id: Ie6cde9eebc83e42029967141cb32ebc459fd3680
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Use pointed value (ipv6 address) as hash key instead of pointer value
(pointer to ipv6 address on the stack).
Type: fix
Change-Id: I74a8b6d4bb552b5b344bcb50c8e830700c4ce739
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: Ignas Bacius <ignas@noia.network>
Change-Id: Id99a15272f6f12a724a4cfd9de461f1aa6a6a634
|
|
interface
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I0b7c189006e30a357cd6be4f3c9c61fded4157cb
|
|
vlib_buffer_copy(...) returns NULL if the system is temporarily out of
buffers.
This is NOT correct. Please don't be this person:
c0 = vlib_buffer_copy (vm, p0);
ci0 = vlib_get_buffer_index (vm, c0);
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ic25ef58965871ea5d2b40904df9506803f69e47e
|
|
The option parsing loop had "break" statements included in each
'if (unformat (line_input, "this-option ...") option_values=xxx;'
statement.
Result: the code would silently ignore all but the first
option. Probably broken forever, not easy to spot because the code
looks OK even though it's badly broken.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I667bee85b4ca654b53fb3af421f957957ed0f0f8
|
|
For details, see the Jira ticket below. Fix gerrit 23350.
Type: fix
Fixes: 28a6eb7
Ticket: VPP-1840
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ic9248734bb330eadb302f8410e8db9c64723f075
|
|
Type: fix
Change-Id: I8f81cd6c29ff8cb4f0b4850b8b1f6611d89ddb38
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: docs
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I46856db81d42c3f10c03a7bf9a245cc998cd8a01
|
|
Type: docs
Change-Id: I907f2c7f5d73dd88b16a6ff78ef072e13af9739e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
- ip-neighbour: generic neighbour handling; APIs, DBs, event handling,
aging
- arp: ARP protocol implementation
- ip6-nd; IPv6 neighbor discovery implementation; separate ND,
MLD, RA
- ip6-link; manage link-local addresses
- l2-arp-term; events separated from IP neighbours, since they are not
the same.
vnet retains just enough education to perform ND/ARP packet
construction.
arp and ip6-nd to be moved to plugins soon.
Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe
Signed-off-by: Neale Ranns <nranns@cisco.com>
|