Age | Commit message (Collapse) | Author | Files | Lines |
|
[support for VPWS/VPLS]
- switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths
- VLIB nodes to handle pop/push of MPLS labels to L2
Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
VPP crash when trying to send arp message or to probe neighbor over
interface with IP address but without hw address (local0 and tunnels
- vxlan, gre, ...)
Change-Id: I08a1c97d3ea913fc11b2886cf73b2ccc31356664
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
Change-Id: I5e04d618c4b4987edc64f6d82fd0a81b8362dbb0
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
- Make tcp output buffer allocation macro an inline function
- Use per ip version per thread tx frames for retransmits and timer
events
- Fix / parameterize tcp data structure preallocation
- Add a couple of gdb-callable show commands
- Fix local endpoint cleanup
Change-Id: I67b47b7570aa14cb4634b6fd93c57cd2eacbfa29
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Also fixes csum computation for lisp control plane 4o6 encapsulated control
messages.
Change-Id: I991e0b5c0d16dc51e0b5bdc79e1d752270b34765
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I655f41878ca3595681d0255782b0faba01c9824b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- the echo_reply_node is now notifying the cli process on the main thread/vlib_main
- the timestamp for the icmp reply is now acquired in the echo_reply_node and not in the cli process to avoid an off by 10ms error (see 【vpp-dev】delay is error in ping with multi worker thread)
Change-Id: I21d37002b0376b4f2ccab08d8f04c2f2944b9b39
Signed-off-by: Mohammed Hawari <mhawari@cisco.com>
|
|
Change-Id: Ib5ad1369678389534426902ce698bccf7a6d9ec2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Idf4f8b02337551670d6b7ce1a03799de9c53d19a
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Paths are given a preference, lowest value is 'best'. Only paths that are up are up contribute to fprwarding - that's unchanged. What's new is that of the path's that re up only those that have the best preference contribute. A poor man's primary and backup. It's not true primary/backup function because the FIB must converge before the lower preference paths are used.
Change-Id: Ie4453c4a7b1094c6c2b51fe1594b8302103bb68e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I2cb6ce4e29813f6602b14e6e61713fb381fbcef8
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I123eccea98abafeb31f25d2a162501e2eded60d4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
To save space in the first cacheline following is changed:
- total_length_not_including_first_buffer moved to the 2nd cacheline.
This field is used only when VLIB_BUFFER_TOTAL_LENGTH_VALID and
VLIB_BUFFER_NEXT_PRESENT are both set.
- free_list_index is now stored in 4bits inside flags, which
allows up to 16 free lists. In case we need more we can store index
in the 2nd cachelin
Change-Id: Ic8521350819391af470d31d3fa1013e67ecb7681
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
If a bonded interface is in active-backup mode and configured with
IPv4 and/or IPv6 addresses, on slave interface link up/down, send
a GARP packet if configured with an IPv4 address and an unsolcited
NA if configured with an IPv6 address. These packets can help with
faster route convergence in the next hop router/switch.
Change-Id: I68ccb11a4a40cda414704fa08ee0171c952befa2
Signed-off-by: John Lo <loj@cisco.com>
|
|
after deleting a sub interface with IP4/IP6 address vpp crash
Change-Id: Ie768ca845b9e2394f61e2a8e9722a80a788746e7
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
Change-Id: I83a6c277fa211ac2c2ca2d603650c992886af0a7
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
ICMP to ICMPv6 error message inner UDP packet translation
delete ST entries when deleting static BIB entry
Change-Id: I2a28631ac040e20827a692331506cd8254f70916
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Added ICMP error messages translation.
Added check for multi thread (not supported yet, so init failed).
Added API definition for custom NAT64 refix.
Change-Id: Ice2f04631af63e594aecc09087a1cf59f3b676fb
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I586a758a8b4b0ea5ca030b2df2796f5acb49e154
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I76d399915c76ec68d8a401e11c14dc15c55291e4
Signed-off-by: wenxian li <wofanli@gmail.com>
|
|
Change-Id: Ib874ad93357500b2c425d75cf48834264b2183fc
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I67839281623721bf42f0a918a53356143d9dc78a
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I7de6b96631d1645d0eadd38525860d84d78e316d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
don't add duplicate extensions.
Change-Id: Icf72d6e1b004d0dda532bec2b51f6b74544925bb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- inline the FIB lookup function; this requires access to the bihash, so for files that use more than one type this casues problems. those files that include ip6_fib.h unnecessarily have been updated
- better use of the feature arcs. ip6-lookup and interface-output are now sentinels (end-node-index in the cm speak) rather than enabled features.
Change-Id: I9d1375fee63f7dbb2d327da6124d8e60b63367ec
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
there are, intentionally, no validation checks in the ARP/ND code to prevent an ARP/ND entry from being installed for an address that is not local to the interface's sub-net. This is ok, since the adjacency/FIB code is designed to handle this case using the 'refinement' criteria - i.e. only installing a FIB entry for the address if the address 'refines' (i.e. is more specific than) the interface's sub-net.
However, the refinement criteria currently operates on the FIB entry's prefix (which is a /32, so on the address) and not on the next-hop in the path.
So, enter multiple ARP entries for the same address on different links, and this refinement criteria uses only the last added path, and so will remove the FIB entry should the ARP entries be added in the 'wrong' order.
This fix updates the refinement criteria to work on each path of the FIB entry. The entry is installed if one of the paths refines the covers and only paths refining the cover contribute forwarding.
Per-path refinement checks are stored in path-extensions. The patch is rather large as path-extension, which were previously used only for out-going MPLS labels, have been generalized.
Change-Id: I00be359148cb948c32c52109e832a70537a7920a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I1b71010e20742eee02693d672e24c85897e37759
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
learn ARP peers if, 1) it's a reply to a local address, 2) we are sending a response to a request.
send proxy ARP responses only in the interface the request was sent.
Change-Id: I22b949c65122824233076492b7dd537daca07bc2
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ic896b237a7d141243e1b7d6d4fbb2a120f44363e
Signed-off-by: flyingeagle23 <wang.hui56@zte.com.cn>
|
|
This should avoid random crashes due to reception of packets (multicast
in particular) before ip6 addresses are configured on the interfaces.
Change-Id: Ibcf1a5a2ae2fa75f8b57da1b2f09f32c081210d7
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ia11fa42d1f2b21a6195e7dc890f958830f83d3a7
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
(VPP-708)
Change-Id: I9ad636f80bf109ffac9ca1b6d80d5f2c31f2076a
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Id4fdf2abf3bae3b14cdc6489ca16d2007da78d07
Signed-off-by: flyingeagle23 <wang.hui56@zte.com.cn>
|
|
Change-Id: I046d9402b79fdbc6a6663199ffff8e40a278fd51
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- the flow hash config is (and was) cached on the load-balance object so the fib_table_t struct is not used a switch time. Therefore changes to the table's flow hash config need to be propagated to all load-balances and hance all FIB entries in the table.
- enable API for setting the IPv6 table flow hash config
- use only the hash config in the fib_table_t object and not on the ipX_fib_t
- add tests.
Change-Id: Ib804c11162c6d4972c764957562c372f663e05d4
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I72298aaae7d172082ece3a8edea4217c11b28d79
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- only build them for popular path-lists (where popular means more than 64 children)
the reason to have a map is to improve convergence speed for recursive prefixes - if there are only a few this technique is not needed
- only build them when there is at least one path that has recursive constraints, i.e. a path that can 'fail' in a PIC scenario.
- Use the MAPS in the switch path.
- PIC test cases for functionality (not convergence performance)
Change-Id: I70705444c8469d22b07ae34be82cfb6a01358e10
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I4c3ce4d58df7977490fc94991291422ea1e31ee3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
tests). The DPO was incorrectly initialised with FIB_PROTO_MAX
Change-Id: I962df9e162e4dfb6837a5ce79ea795d5ff2d7315
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ic07ec5d4c2560a414d5f4f7eb37e10faf591664a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: If98355bebe823f45b11b0908a8d7700ab273a6db
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ic16bc10d0b2877b2afdf052615f9334f31b9519f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
1 - interface-DPO
Used in the Data-plane to change a packet's input interface
2 - MPLS multicast FIB entry
Same as a unicast entry but it links to a replicate not a load-balance DPO
3 - Multicast MPLS tunnel
Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to .
4 - Resolve a path via a local label (of an mLDP LSP)
For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP.
5 - MPLS disposition path sets RPF-ID
For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet.
6 - RPF check with per-entry RPF-ID
An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface.
Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I2d1c5e4dbdcab2a81d6c88801183ca0bbc83e1d9
Signed-off-by: flyingeagle23 <wang.hui56@zte.com.cn>
|
|
This patch deprecates stack-based thread identification,
Also removes requirement that thread stacks are adjacent.
Finally, possibly annoying for some folks, it renames
all occurences of cpu_index and cpu_number with thread
index. Using word "cpu" is misleading here as thread can
be migrated ti different CPU, and also it is not related
to linux cpu index.
Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I03195a86c69f84a301051c6b3ab64456bbf28645
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
fixed arp registration without allocating the event
added protection against identical ND registrations
Change-Id: I4e2db4913b35d895d8686ada1f0818920f276ad6
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
1) 16-8-8 stride. Reduce trie depth walk traded with increased memory in the top PLY.
2) separate the vector of protocol-independent (PI) fib_table_t with the vector of protocol dependent (PD) FIBs. PD FIBs are large structures, we don't want to burn the memory for ech PD type
3) Go straight to the PD FIB in the data-path thus avoiding an indirection through, e.g., a PLY pool.
Change-Id: I800d1ed0b2049040d5da95213f3ed6b12bdd78b7
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Fix the bug and add the unit test to start with ping test coverage
Change-Id: Ibeacbed1f1660e677faa2dbb2ebe386216693e96
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
we should not suppress arps on remote interface instead we should flood them to the local one
used shg != 0 to identify packets from remote interfaces and disable arp term l2 input feature for them
Change-Id: I701537c05df7451a25ccb5bfc9e2b03ea70cff20
Signed-off-by: Eyal Bari <ebari@cisco.com>
|