Age | Commit message (Collapse) | Author | Files | Lines |
|
Use buffer pre_data and existing buffer trace trajectory code to
find out dpdk buffer leakages.
Change-Id: I26a5d8bd2f23d01cb6070ffc3ddcc6d3d863b575
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I4b4648831551519b2ffb6f93255d28a4b8726c22
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I6cab79c266837a8731adcf78c9e093dfa6be0ead
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ifef8a9328bb865f6ddb041bafe3699153f89755a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
part 2;
- this adds the code to create an IP and MPLS table via the API.
- but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass.
Change-Id: Id124d884ade6cb7da947225200e3bb193454c555
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This will allow us to use this code in client libraries without vlib.
Change-Id: I8557b752496841ba588aa36b6082cbe2cd1867fe
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
The missing header include was generating a compile-time error;
src/vnet/ip/punt.c:460:10: error: implicit declaration of function 'readv'
Change-Id: I3f74294e7824ea3602b8d416c86fdada1aac1906
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
An external (to VPP) process can register (over the VPP binary API) to
receive control plane packets over a UNIX domain socket. The packets are
prepended with a packet descriptor containing meta-data (if_index of
interface, etc).
Currently only UDP is supported.
The socket supports sending of packets/frames as well.
The sent packet is prepended with a descriptor, telling VPP to
route the packet (via ip4-lookup, ip6-lookup) or as an pre-formed
Ethernet frame that is sent directly to interface-output.
The intended use case for this is for an external DHCP client or
a RIP implementation.
New configuration option:
punt { socket <socket path> }
To register use the punt_socket API message.
TODO:
- Add support for pre-routing. I.e send L3 packet to given
TX interface, but do ARP/ND (ip[46]-rewrite)
- Add test scripts
- Support for abstract names (starting with \0)
- Add rate limiting (COP)
- Support for other protocols, e.g. IPv6 ND
Change-Id: I4a0afc8020deebb3d9d74686dde694ee5bcb8d0f
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I05d0c8310aa86480a3d283f45e115284c4b4ebd5
Signed-off-by: dongjuan <dong.juan1@zte.com.cn>
|
|
This include file is present only on x86 so it breaks non-x86 builds.
Change-Id: I6406b0b36f207b684535961545e95dbba707d267
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ie1fba1a32020775444c7b1ed800e8559b54691ff
Signed-off-by: pragash <pxv3620@rit.edu>
|
|
Change-Id: I4f751b0181f25ec6c4abd3a9c7b0386d80743b3a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ia6dd5e948b17b2f3866fe70838eabb09e35415e1
Signed-off-by: Dave Barach <dbarach@cisco.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I4cafc8291725feb499355092bd429433e649b5b2
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I87d3cb5754843f38593e92f60a39af2e5241d1cf
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
commit only the addition of the .api definition and their invocation through VAT so CSIT can use it
Change-Id: Id510f14b1ce007fe5e92120507ea34100652fc64
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- Fix tcp/udp sw checksum computation
- Fix allocation of multi buffer tcp segments for retransmits
- Send FIN only if/when tx fifo is empty
Change-Id: I2e43a14b87a72c9e547b4339b9a51811cf5732c4
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ib5af105e32b6b0df86923e189ab6bf6ee59de5b9
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
[support for VPWS/VPLS]
- switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths
- VLIB nodes to handle pop/push of MPLS labels to L2
Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
VPP crash when trying to send arp message or to probe neighbor over
interface with IP address but without hw address (local0 and tunnels
- vxlan, gre, ...)
Change-Id: I08a1c97d3ea913fc11b2886cf73b2ccc31356664
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
Change-Id: I5e04d618c4b4987edc64f6d82fd0a81b8362dbb0
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
- Make tcp output buffer allocation macro an inline function
- Use per ip version per thread tx frames for retransmits and timer
events
- Fix / parameterize tcp data structure preallocation
- Add a couple of gdb-callable show commands
- Fix local endpoint cleanup
Change-Id: I67b47b7570aa14cb4634b6fd93c57cd2eacbfa29
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Also fixes csum computation for lisp control plane 4o6 encapsulated control
messages.
Change-Id: I991e0b5c0d16dc51e0b5bdc79e1d752270b34765
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I655f41878ca3595681d0255782b0faba01c9824b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- the echo_reply_node is now notifying the cli process on the main thread/vlib_main
- the timestamp for the icmp reply is now acquired in the echo_reply_node and not in the cli process to avoid an off by 10ms error (see 【vpp-dev】delay is error in ping with multi worker thread)
Change-Id: I21d37002b0376b4f2ccab08d8f04c2f2944b9b39
Signed-off-by: Mohammed Hawari <mhawari@cisco.com>
|
|
Change-Id: Ib5ad1369678389534426902ce698bccf7a6d9ec2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Idf4f8b02337551670d6b7ce1a03799de9c53d19a
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Paths are given a preference, lowest value is 'best'. Only paths that are up are up contribute to fprwarding - that's unchanged. What's new is that of the path's that re up only those that have the best preference contribute. A poor man's primary and backup. It's not true primary/backup function because the FIB must converge before the lower preference paths are used.
Change-Id: Ie4453c4a7b1094c6c2b51fe1594b8302103bb68e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I2cb6ce4e29813f6602b14e6e61713fb381fbcef8
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I123eccea98abafeb31f25d2a162501e2eded60d4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
To save space in the first cacheline following is changed:
- total_length_not_including_first_buffer moved to the 2nd cacheline.
This field is used only when VLIB_BUFFER_TOTAL_LENGTH_VALID and
VLIB_BUFFER_NEXT_PRESENT are both set.
- free_list_index is now stored in 4bits inside flags, which
allows up to 16 free lists. In case we need more we can store index
in the 2nd cachelin
Change-Id: Ic8521350819391af470d31d3fa1013e67ecb7681
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
If a bonded interface is in active-backup mode and configured with
IPv4 and/or IPv6 addresses, on slave interface link up/down, send
a GARP packet if configured with an IPv4 address and an unsolcited
NA if configured with an IPv6 address. These packets can help with
faster route convergence in the next hop router/switch.
Change-Id: I68ccb11a4a40cda414704fa08ee0171c952befa2
Signed-off-by: John Lo <loj@cisco.com>
|
|
after deleting a sub interface with IP4/IP6 address vpp crash
Change-Id: Ie768ca845b9e2394f61e2a8e9722a80a788746e7
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
Change-Id: I83a6c277fa211ac2c2ca2d603650c992886af0a7
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
ICMP to ICMPv6 error message inner UDP packet translation
delete ST entries when deleting static BIB entry
Change-Id: I2a28631ac040e20827a692331506cd8254f70916
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Added ICMP error messages translation.
Added check for multi thread (not supported yet, so init failed).
Added API definition for custom NAT64 refix.
Change-Id: Ice2f04631af63e594aecc09087a1cf59f3b676fb
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I586a758a8b4b0ea5ca030b2df2796f5acb49e154
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I76d399915c76ec68d8a401e11c14dc15c55291e4
Signed-off-by: wenxian li <wofanli@gmail.com>
|
|
Change-Id: Ib874ad93357500b2c425d75cf48834264b2183fc
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I67839281623721bf42f0a918a53356143d9dc78a
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I7de6b96631d1645d0eadd38525860d84d78e316d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
don't add duplicate extensions.
Change-Id: Icf72d6e1b004d0dda532bec2b51f6b74544925bb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- inline the FIB lookup function; this requires access to the bihash, so for files that use more than one type this casues problems. those files that include ip6_fib.h unnecessarily have been updated
- better use of the feature arcs. ip6-lookup and interface-output are now sentinels (end-node-index in the cm speak) rather than enabled features.
Change-Id: I9d1375fee63f7dbb2d327da6124d8e60b63367ec
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
there are, intentionally, no validation checks in the ARP/ND code to prevent an ARP/ND entry from being installed for an address that is not local to the interface's sub-net. This is ok, since the adjacency/FIB code is designed to handle this case using the 'refinement' criteria - i.e. only installing a FIB entry for the address if the address 'refines' (i.e. is more specific than) the interface's sub-net.
However, the refinement criteria currently operates on the FIB entry's prefix (which is a /32, so on the address) and not on the next-hop in the path.
So, enter multiple ARP entries for the same address on different links, and this refinement criteria uses only the last added path, and so will remove the FIB entry should the ARP entries be added in the 'wrong' order.
This fix updates the refinement criteria to work on each path of the FIB entry. The entry is installed if one of the paths refines the covers and only paths refining the cover contribute forwarding.
Per-path refinement checks are stored in path-extensions. The patch is rather large as path-extension, which were previously used only for out-going MPLS labels, have been generalized.
Change-Id: I00be359148cb948c32c52109e832a70537a7920a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I1b71010e20742eee02693d672e24c85897e37759
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
learn ARP peers if, 1) it's a reply to a local address, 2) we are sending a response to a request.
send proxy ARP responses only in the interface the request was sent.
Change-Id: I22b949c65122824233076492b7dd537daca07bc2
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ic896b237a7d141243e1b7d6d4fbb2a120f44363e
Signed-off-by: flyingeagle23 <wang.hui56@zte.com.cn>
|
|
This should avoid random crashes due to reception of packets (multicast
in particular) before ip6 addresses are configured on the interfaces.
Change-Id: Ibcf1a5a2ae2fa75f8b57da1b2f09f32c081210d7
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ia11fa42d1f2b21a6195e7dc890f958830f83d3a7
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
(VPP-708)
Change-Id: I9ad636f80bf109ffac9ca1b6d80d5f2c31f2076a
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|