summaryrefslogtreecommitdiffstats
path: root/src/vnet/ip
AgeCommit message (Collapse)AuthorFilesLines
2017-07-27ping: fixing wrong value when there are worker threadsMohammed Hawari2-9/+21
- the echo_reply_node is now notifying the cli process on the main thread/vlib_main - the timestamp for the icmp reply is now acquired in the echo_reply_node and not in the cli process to avoid an off by 10ms error (see 【vpp-dev】delay is error in ping with multi worker thread) Change-Id: I21d37002b0376b4f2ccab08d8f04c2f2944b9b39 Signed-off-by: Mohammed Hawari <mhawari@cisco.com>
2017-07-20Fix coverity issue introduced with IP checksum offload commitDamjan Marion1-3/+3
Change-Id: Ib5ad1369678389534426902ce698bccf7a6d9ec2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-07-19Fix IP checksum offload metadata setupDave Barach1-2/+12
Change-Id: Idf4f8b02337551670d6b7ce1a03799de9c53d19a Signed-off-by: Dave Barach <dave@barachs.net>
2017-07-18FIB path preferenceNeale Ranns3-22/+20
Paths are given a preference, lowest value is 'best'. Only paths that are up are up contribute to fprwarding - that's unchanged. What's new is that of the path's that re up only those that have the best preference contribute. A poor man's primary and backup. It's not true primary/backup function because the FIB must converge before the lower preference paths are used. Change-Id: Ie4453c4a7b1094c6c2b51fe1594b8302103bb68e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-07-18TCP/UDP checksum offload APIDave Barach2-4/+9
Change-Id: I2cb6ce4e29813f6602b14e6e61713fb381fbcef8 Signed-off-by: Dave Barach <dave@barachs.net>
2017-07-14vnet_buffer_t flags cleanupDamjan Marion4-43/+49
Change-Id: I123eccea98abafeb31f25d2a162501e2eded60d4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-07-14Introduce l{2,3,4}_hdr_offset fields in the buffer metadataDamjan Marion3-17/+14
To save space in the first cacheline following is changed: - total_length_not_including_first_buffer moved to the 2nd cacheline. This field is used only when VLIB_BUFFER_TOTAL_LENGTH_VALID and VLIB_BUFFER_NEXT_PRESENT are both set. - free_list_index is now stored in 4bits inside flags, which allows up to 16 free lists. In case we need more we can store index in the 2nd cachelin Change-Id: Ic8521350819391af470d31d3fa1013e67ecb7681 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-07-06Send GARP/NA on bonded intf slave up/down if in active-backup modeJohn Lo2-0/+55
If a bonded interface is in active-backup mode and configured with IPv4 and/or IPv6 addresses, on slave interface link up/down, send a GARP packet if configured with an IPv4 address and an unsolcited NA if configured with an IPv6 address. These packets can help with faster route convergence in the next hop router/switch. Change-Id: I68ccb11a4a40cda414704fa08ee0171c952befa2 Signed-off-by: John Lo <loj@cisco.com>
2017-06-23IP4/IP6 FIB: fix crash during interface deletePavel Kotucek4-1/+42
after deleting a sub interface with IP4/IP6 address vpp crash Change-Id: Ie768ca845b9e2394f61e2a8e9722a80a788746e7 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-06-19NAT64: Hairpinning (VPP-699)Matus Fabian2-28/+49
Change-Id: I83a6c277fa211ac2c2ca2d603650c992886af0a7 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-06-12NAT64: bug fixMatus Fabian1-5/+9
ICMP to ICMPv6 error message inner UDP packet translation delete ST entries when deleting static BIB entry Change-Id: I2a28631ac040e20827a692331506cd8254f70916 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-06-09NAT64: ICMP error supportMatus Fabian1-8/+5
Added ICMP error messages translation. Added check for multi thread (not supported yet, so init failed). Added API definition for custom NAT64 refix. Change-Id: Ice2f04631af63e594aecc09087a1cf59f3b676fb Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-06-06Fix coverity error in IP4 Mtrie.Neale Ranns1-4/+4
Change-Id: I586a758a8b4b0ea5ca030b2df2796f5acb49e154 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-06-04Fix typo for specifying table_id on ping.wenxian li1-1/+1
Change-Id: I76d399915c76ec68d8a401e11c14dc15c55291e4 Signed-off-by: wenxian li <wofanli@gmail.com>
2017-06-01Fix 'ip probe' on /32Neale Ranns3-44/+48
Change-Id: Ib874ad93357500b2c425d75cf48834264b2183fc Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-30Flowprobe: Stateful flows and IPv6, L4 recordingOle Troan1-0/+6
Change-Id: I67839281623721bf42f0a918a53356143d9dc78a Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Pavel Kotucek <pkotucek@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com>
2017-05-26MPLS lookup DPO does not pop the label (nor does it handle replicate)Neale Ranns1-1/+0
Change-Id: I7de6b96631d1645d0eadd38525860d84d78e316d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-26ARP/ND use path_remove to complement path_addNeale Ranns1-7/+31
don't add duplicate extensions. Change-Id: Icf72d6e1b004d0dda532bec2b51f6b74544925bb Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-24IPv6 Performance bugsNeale Ranns1-18/+14
- inline the FIB lookup function; this requires access to the bihash, so for files that use more than one type this casues problems. those files that include ip6_fib.h unnecessarily have been updated - better use of the feature arcs. ip6-lookup and interface-output are now sentinels (end-node-index in the cm speak) rather than enabled features. Change-Id: I9d1375fee63f7dbb2d327da6124d8e60b63367ec Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-23ARP/ND entries for the same address on different interfaces (VPP-848)Neale Ranns1-6/+6
there are, intentionally, no validation checks in the ARP/ND code to prevent an ARP/ND entry from being installed for an address that is not local to the interface's sub-net. This is ok, since the adjacency/FIB code is designed to handle this case using the 'refinement' criteria - i.e. only installing a FIB entry for the address if the address 'refines' (i.e. is more specific than) the interface's sub-net. However, the refinement criteria currently operates on the FIB entry's prefix (which is a /32, so on the address) and not on the next-hop in the path. So, enter multiple ARP entries for the same address on different links, and this refinement criteria uses only the last added path, and so will remove the FIB entry should the ARP entries be added in the 'wrong' order. This fix updates the refinement criteria to work on each path of the FIB entry. The entry is installed if one of the paths refines the covers and only paths refining the cover contribute forwarding. Per-path refinement checks are stored in path-extensions. The patch is rather large as path-extension, which were previously used only for out-going MPLS labels, have been generalized. Change-Id: I00be359148cb948c32c52109e832a70537a7920a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-19mfib CLI bugs (VPP-852)Neale Ranns1-0/+2
Change-Id: I1b71010e20742eee02693d672e24c85897e37759 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-17ARP learning fixes (VPP-843)Neale Ranns2-10/+21
learn ARP peers if, 1) it's a reply to a local address, 2) we are sending a response to a request. send proxy ARP responses only in the interface the request was sent. Change-Id: I22b949c65122824233076492b7dd537daca07bc2 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-16ping command does not work when there is woker thread (VPP-844)flyingeagle231-0/+1
Change-Id: Ic896b237a7d141243e1b7d6d4fbb2a120f44363e Signed-off-by: flyingeagle23 <wang.hui56@zte.com.cn>
2017-05-11Validate ip6 interface fib tables early onFlorin Coras1-0/+5
This should avoid random crashes due to reception of packets (multicast in particular) before ip6 addresses are configured on the interfaces. Change-Id: Ibcf1a5a2ae2fa75f8b57da1b2f09f32c081210d7 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-05-05ip6_to_ip4.h coverity fixMatus Fabian1-1/+1
Change-Id: Ia11fa42d1f2b21a6195e7dc890f958830f83d3a7 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-05-05NAT64: Move IPv6-IPv4 virtual reassembly code from MAP-T to common library ↵Matus Fabian2-0/+1148
(VPP-708) Change-Id: I9ad636f80bf109ffac9ca1b6d80d5f2c31f2076a Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-05-03change ip4_drop_node node register coding formatflyingeagle231-2/+2
Change-Id: Id4fdf2abf3bae3b14cdc6489ca16d2007da78d07 Signed-off-by: flyingeagle23 <wang.hui56@zte.com.cn>
2017-05-02Allow local/for-us replications for IP multicast routes on the CLINeale Ranns1-1/+6
Change-Id: I046d9402b79fdbc6a6663199ffff8e40a278fd51 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-26IP Flow Hash Config fixesNeale Ranns4-15/+17
- the flow hash config is (and was) cached on the load-balance object so the fib_table_t struct is not used a switch time. Therefore changes to the table's flow hash config need to be propagated to all load-balances and hance all FIB entries in the table. - enable API for setting the IPv6 table flow hash config - use only the hash config in the fib_table_t object and not on the ipX_fib_t - add tests. Change-Id: Ib804c11162c6d4972c764957562c372f663e05d4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-25"autoreply" flag: autogenerate standard xxx_reply_t messagesDave Barach1-99/+9
Change-Id: I72298aaae7d172082ece3a8edea4217c11b28d79 Signed-off-by: Dave Barach <dave@barachs.net>
2017-04-24Improve Load-Balance MAPsNeale Ranns3-90/+153
- only build them for popular path-lists (where popular means more than 64 children) the reason to have a map is to improve convergence speed for recursive prefixes - if there are only a few this technique is not needed - only build them when there is at least one path that has recursive constraints, i.e. a path that can 'fail' in a PIC scenario. - Use the MAPS in the switch path. - PIC test cases for functionality (not convergence performance) Change-Id: I70705444c8469d22b07ae34be82cfb6a01358e10 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-19Learn IP6 link-local ND entries from NSs sourced from link-local addressNeale Ranns1-2/+5
Change-Id: I4c3ce4d58df7977490fc94991291422ea1e31ee3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-13Remove unsed parameter from fib_table_entry_special_add() (only used in FIB ↵Neale Ranns2-5/+3
tests). The DPO was incorrectly initialised with FIB_PROTO_MAX Change-Id: I962df9e162e4dfb6837a5ce79ea795d5ff2d7315 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-11MPLS Mcast coverity fixesNeale Ranns1-1/+1
Change-Id: Ic07ec5d4c2560a414d5f4f7eb37e10faf591664a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-11MTRIE coverity fixesNeale Ranns1-6/+8
Change-Id: If98355bebe823f45b11b0908a8d7700ab273a6db Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-11Remove usued, redundant and deprecated code from lookup.hNeale Ranns7-95/+33
Change-Id: Ic16bc10d0b2877b2afdf052615f9334f31b9519f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-07MPLS McastNeale Ranns6-40/+108
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-07VPP-684.Add ip which mask length exceeding upper limit,ping segmentfaultflyingeagle231-1/+4
Change-Id: I2d1c5e4dbdcab2a81d6c88801183ca0bbc83e1d9 Signed-off-by: flyingeagle23 <wang.hui56@zte.com.cn>
2017-04-06Use thread local storage for thread indexDamjan Marion5-39/+39
This patch deprecates stack-based thread identification, Also removes requirement that thread stacks are adjacent. Finally, possibly annoying for some folks, it renames all occurences of cpu_index and cpu_number with thread index. Using word "cpu" is misleading here as thread can be migrated ti different CPU, and also it is not related to linux cpu index. Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-03Adjacency layout change and move to vnet/adjNeale Ranns3-217/+3
Change-Id: I03195a86c69f84a301051c6b3ab64456bbf28645 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-01ARP/ND/API:fix arp reg + nd no identical regsEyal Bari1-55/+38
fixed arp registration without allocating the event added protection against identical ND registrations Change-Id: I4e2db4913b35d895d8686ada1f0818920f276ad6 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-04-01MTRIE Optimisations 2Neale Ranns8-296/+526
1) 16-8-8 stride. Reduce trie depth walk traded with increased memory in the top PLY. 2) separate the vector of protocol-independent (PI) fib_table_t with the vector of protocol dependent (PD) FIBs. PD FIBs are large structures, we don't want to burn the memory for ech PD type 3) Go straight to the PD FIB in the data-path thus avoiding an indirection through, e.g., a PLY pool. Change-Id: I800d1ed0b2049040d5da95213f3ed6b12bdd78b7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-30VPP-669: ping: fix coverity check error 165075 + add ping testcaseAndrew Yourtchenko1-1/+1
Fix the bug and add the unit test to start with ping test coverage Change-Id: Ibeacbed1f1660e677faa2dbb2ebe386216693e96 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-03-30BRIDGE-DOMAIN:enable arp term,mac/ip learning on local intsEyal Bari2-7/+4
we should not suppress arps on remote interface instead we should flood them to the local one used shg != 0 to identify packets from remote interfaces and disable arp term l2 input feature for them Change-Id: I701537c05df7451a25ccb5bfc9e2b03ea70cff20 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-03-29IP lookup: remove used stack variablesNeale Ranns1-21/+5
Change-Id: I19b16d3e04a187ffe736fae868941957c70edf62 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-29Mtrie optimisationsNeale Ranns5-222/+191
1 - make the default route non-special, i.e. like any other less specific route. Consequently, all buckets have a valid valid index of either a leaf or a ply. Checks for special indeices in the data-path can thus be removed. 2 - since all leaves are now 'real' i.e. they represent a real load-balance object, to tell if a ply slot is 'empty' requeirs chekcing that the prefix length of the leaf occupying the slot is slot than the minium value for that ply. 3 - when removing a leaf find the cover first, then recurse down the ply and replace the old leaf with the cover. This saves us a ply walk. Change-Id: Idd523019e8bb1b6ef527b1f5279a5e24bcf18332 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-29Sub-net broadcast addresses for IPv4Neale Ranns1-3/+70
Change-Id: Ib2189d01e8bc61de57404159690fb70f89c47277 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-27Mcast rewrite no memcpyNeale Ranns4-27/+29
use a 32bit mask in the adjacency to AND with the IP address and OR into the rewrite. Change-Id: I80b0f246c18fd74f3e43c5d49e25833412f34665 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-22ping: allow the user to send bursts of N packets instead of single packetAndrew Yourtchenko1-10/+42
Change-Id: I3c1d3a2db56487473123e6fec2b076a063473313 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-03-1764 bit per-thread countersNeale Ranns1-17/+19
after: TenGigabitEthernet5/0/1-output active 107522 17375708 0 7.22e0 161.60 TenGigabitEthernet5/0/1-tx active 107522 17375708 0 6.93e1 161.60 ip4-input-no-checksum active 107522 17375708 0 2.52e1 161.60 ip4-lookup active 107522 17375708 0 3.10e1 161.60 ip4-rewrite active 107522 17375708 0 2.52e1 161.60 before TenGigabitEthernet5/0/1-output active 433575 110995200 0 6.95e0 256.00 TenGigabitEthernet5/0/1-tx active 433575 110995200 0 7.14e1 256.00 ip4-input-no-checksum active 433575 110995200 0 2.66e1 256.00 ip4-lookup active 433575 110995200 0 3.29e1 256.00 ip4-rewrite active 433575 110995200 0 2.59e1 256.00 Change-Id: I46405bd22189f48a39f06e3443bb7e13f410b539 Signed-off-by: Neale Ranns <nranns@cisco.com>