Age | Commit message (Collapse) | Author | Files | Lines |
|
Add descriptions to clib_file_t template structures so that
sockets can be identified via the 'show unix file' cli command.
Type: fix
Change-Id: Ibf82d55aa6c7b1126bd252b76d0dc8b7076f5046
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
shallow was the default, but probably by accident as it depended on
module load order.
full assembly is the v4 behaviour.
using proper types allows gdb to print enum names.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: If157c5b83614c7adbd7a15a8227a68f8caf4e92c
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Add safeguards when tracing packets to avoid cases where clear trace
was issue while buffers were held in reassembly.
Type: fix
Change-Id: I1bdd1e629e8bc08ce63913fd3c4b2327e47dec04
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: refactor
Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
ip4_rewrite_inline_with_gso() did vlib_prefetch_buffer_header() for all nodes.
However it is not necessary for ip-rewrite, it is only needed by ip-midchain.
This patch makes ip4-rewrite prefetches less buffers to save cycles.
Signed-off-by: PiotrX Kleski <piotrx.kleski@intel.com>
Change-Id: Ib82dcb0eda4a2d1d7b8d664f2224d49b72aef50f
|
|
Type: feature
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: I964afd9266645de5c87d49c58ce6b48c2c18f97f
|
|
Type: feature
Use the FIB to provide SAS (in so far as it is today)
- Use the glean adjacency as the record of the connected prefixes
= there's a glean per-{interface, protocol, connected-prefix}
- Keep the glean up to date with whatever the recieve host prefix is
(since it can change)
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: I0f3dd1edb1f3fc965af1c7c586709028eb9cdeac
|
|
Type: fix
The vector 'to_free' allocated on heap should be freed to avoid memory leak.
Signed-off-by: barryxie <barryxie@tencent.com>
Change-Id: I539498b50a7f3e346c83b869fb400868961c233f
|
|
Type: improvement
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: I318424ffa569d9a09187066d6ba15576757c1cf6
|
|
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: If484725d48190246e4da09ceaed48a68a8a253f2
|
|
Type: improvement
Change-Id: Ie3a5b182e446c407f258c043c22d1cf25eb7ee59
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
VAT2: A completely auto-generated replacement of VAT.
Reads input message in JSON from stdin and outputs received messages in JSON.
A VAT2 plugin is automatically built for a .api file.
There no longer a need for a separate _test.c.
Example:
vat2 show_version {}
{
"_msgname": "show_version_reply",
"retval": 0,
"program": "vpe",
"version": "21.01-rc0~411-gf6eb348a6",
"build_date": "2020-11-19T09:49:25",
"build_directory": "/vpp/autogen3"
}
vat2 sw_interface_dump '{"sw_if_index": -1,
"name_filter_valid": 0,
"name_filter": ""}'
[{
"_msgname": "sw_interface_details",
"sw_if_index": 0,
"sup_sw_if_index": 0,
"l2_address": "00:00:00:00:00:00",
"flags": "Invalid ENUM",
"type": "IF_API_TYPE_HARDWARE",
"link_duplex": "LINK_DUPLEX_API_UNKNOWN",
"link_speed": 0,
"link_mtu": 0,
"mtu": [0, 0, 0, 0],
"sub_id": 0,
"sub_number_of_tags": 0,
"sub_outer_vlan_id": 0,
"sub_inner_vlan_id": 0,
"sub_if_flags": "Invalid ENUM",
"vtr_op": 0,
"vtr_push_dot1q": 0,
"vtr_tag1": 0,
"vtr_tag2": 0,
"outer_tag": 0,
"b_dmac": "00:00:00:00:00:00",
"b_smac": "00:00:00:00:00:00",
"b_vlanid": 0,
"i_sid": 0,
"interface_name": "local0",
"interface_dev_type": "local",
"tag": ""
}]
This is the first phase and vat2 is not integrated in packaging yet.
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ib45ddeafb180ea7da8c5dc274a9274d7a4edc876
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: improvement
Change-Id: Ica5f395075677bda5f38d28e704f65350af88610
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
ethernet dataplane loads MAC addresses as 64-bits loads for efficiency.
We must make sure it is valid, especially for the vector of secondary
MACs.
Type: fix
Change-Id: I851e319b8a973c154e85ff9f05f3b8e385939788
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
When using classifier to filter traces, not all packets will be traced.
In that case, we should only count traced packets.
Type: fix
Change-Id: I87d1e217b580ebff8c6ade7860eb43950420ae78
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: docs
Change-Id: I96d5cdb41bd938f06d2d72f2625bf1b3d2c5b1b4
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
- use tunnel_encap_decap_flags to control the copying of DSCP/ECN/etc
during IPSEC tunnel mode encap.
- use DSCP value to have fixed encap value.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: If4f51fd4c1dcbb0422aac9bd078e5c14af5bf11f
|
|
Type: refactor
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: Id1801519638a9b97175847d7ed58824fb83433d6
|
|
Type: fix
This is not an API change, it's the same values, just a different named
type.
also use VppEnum values in tests
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I3a18b529514f3cc9467ae4e8ac3e88d067fc776b
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id13f33843b230a1d169560742c4f7b2dc17d8718
|
|
Type: improvement
reduce the compile time by moving the bihash includes out of ip[46].h
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I6b9216e10aff1013071f9238b3e1ebbdd205bd80
|
|
Type: fix
reference counting on the ip6 state was broken, meaning that disabling
one of serveral ip6 configs on an interface, completely ip6 disabled the
interface.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ie3af51587310ffe871ad2a9cbd927e15a3ececa9
|
|
Type: style
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I26a19e42076e031ec5399d5ca05cb49fd6fbe1cd
|
|
Type: improvement
Change-Id: I0c82722dfce990345fe6eeecdb335678543367e0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I73629ccf7d5a49da3858899dc727cc180fb53003
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Reworked the code to reduce line fill buffer pressure. Improved compiler loop
unrolling, over the existing complex hand-unrolling. Updated the code to use
vlib_get_buffers & vlib_buffer_enqueue_to_next.
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I7dca7515ba91672eaf50a6eecd13811210cf0006
|
|
Type: improvement
Change-Id: I8c28c845c75657852f1e513e2832771fad6b90b7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Main heap can be hugepage backed so it is more efficient to use
main heap instead of allocating special heap just for mtrie....
Type: improvement
Change-Id: I210912ab8567c043205ddfc10fdcfde9a0fa7757
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
While preparing to send a ip_mroute_details API message, the number
of paths for a multicast route is stored in an int in
send_ip_mroute_details(). Before the value in the int is copied into
the field n_paths in the API message, the byte order is swapped.
This results in n_paths getting set to 0.
Change the int to a u8 and omit the byte swap so API clients can
receive data on multicast route paths.
Change-Id: Ie6dcb0f7b135c5b5deeeb2e44147560dbbb12507
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: improvement
Change-Id: Ica75c4e43d6198658a1954640c7ac56ea68bb39a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This patch aims to improve decap performance by reducing expensive
hash_get callings as less as possible using AVX512 on XEON.
e.g. vxlan, vxlan_gpe, geneve, gtpu.
For the existing code, if vtep4 of the current packet match the last
vtep4_key_t well, expensive hash computation can be avoided and the
code returns directly.
This patch improves tunnel decap multiple flows case greatly by
leveraging 512bit vector register on XEON accommodating 8 vtep4_keys.
It enhances the possiblity of avoiding unnecessary hash computing
once hash key of the current packet hits any one of 8 in the 512bit
cache.
The oldest element in vtep4_cache_t is updated in round-robin order.
vlib_get_buffers is also leveraged in the meanwhile.
Type: improvement
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Signed-off-by: Junfeng Wang <drenfong.wang@intel.com>
Change-Id: I313103202bd76f2dd638cd942554721b37ddad60
|
|
In one's complement, there are two representations of zero: the all
zero and the all one bit values, often referred to as +0 and -0. See
RFC 1624 section 3 for more details.
This used to be taken care of in ip4_header_checksum(), but it is no
longer the case. The check ip->checksum == ip4_header_checksum (ip) is
no longer correct in the -0 case.
Always use ip4_header_checksum_is_valid() instead (which behaves
correctly since 9a79a1ab931c3b5a7ae07d6f0fcfef7c4368a2c4).
Type: fix
Fixes: e5f0050c7a5d411f96af6401797529d58825e2af
Change-Id: Iacc6b60645a834287b085aecb9e3fdb4554cf0cf
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
It is cheaper to include checksum field in calculation and simply
compare result with zero.
Type: improvement
Change-Id: I6f77632c0a4d2f2c632d044d3a5d2fcf2b5bac62
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Make it shorter and same format when converting to biggor or smaller
types.
Type: refactor
Change-Id: I443d67e18ae65d779b4d9a0dce5406f7d9f0e4ac
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Building VPP using gcc-10 fails because of the array bounds check
error for function ip4_header_checksum(), with option field in IPv4
header exceeding the ip4_header_t bound. Fix this error by turning
off the array bounds check option for function ip4_header_checksum().
Change-Id: I68cc241ae9e403d35ac2e320549506dc6565a0b6
Type: fix
Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com>
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I64a99a4fbc674212944247793fd5c1fb701408cb
|
|
This patch adds the API for vnet/flow infra.
Currently this API supports the below flow types:
VNET_FLOW_TYPE_IP4_N_TUPLE
VNET_FLOW_TYPE_IP6_N_TUPLE
VNET_FLOW_TYPE_IP4_N_TUPLE_TAGGED
VNET_FLOW_TYPE_IP6_N_TUPLE_TAGGED
VNET_FLOW_TYPE_IP4_L2TPV3OIP
VNET_FLOW_TYPE_IP4_IPSEC_ESP
VNET_FLOW_TYPE_IP4_IPSEC_AH
VNET_FLOW_TYPE_IP4_GTPU
All the above flows are tested with Intel E810/X710 NIC
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Icb8ae20cab9bdad6b120dddc3bd4fb1d85634f3f
|
|
Make sure payload_proto variable is set properly in vnet_ip_mroute_cmd()
function. This avoids using an uninitialized payload_proto value which
could lead to assertion failure when using e.g. the ip mroute add
command.
Type: fix
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
Change-Id: I8b1d1df02e80150836b7b0448814d8f99747eeed
|
|
vrf table may be dynamically added or deleted. When the table is deleted,
clients who use the corresponding vrf table may need a callback to
do the clean up. The mechanism added here is cloned from
VNET_SW_INTERFACE_ADD_DEL_FUNCTION.
Type: improvement
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I08635c715cd7361a6c359b90890dd3545b0da94c
|
|
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ia77ce41a8f1a032c5e027c4bb47347752cfda0a9
|
|
Type: fix
Change-Id: Idb6f82e08b29e3805ed2133acb5fd7226148f672
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
- add 64-bit version
- remove byte swaps, as they are actually not needed
Type: improvement
Change-Id: Ia1efe54ee80b4ae7633b9ab36b3154c3357006d7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I67bacb90a3dd8a9bd7beb4975ad0fe344675b65f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Previously there's a format_ip4_address in format_ip6...
This patch fixes this typo
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ice124db6594720ed35a992d069341f399c331e1d
|
|
Type: fix
Signed-off-by: jiangxiaoming <jiangxiaoming@outlook.com>
Change-Id: I3ace7dfe3ddacb4f7fa7a974a2ffe2b3cf902ff9
|
|
Type: fix
Fixes: a84cb715f5a4366dd2f32de18ad92bec566924da
Change-Id: Id448d6ae9cfdd3122e8187121c509412835117c5
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Change-Id: I39341f201209931392f315ead5adfddd8b567caf
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
No change in default behavior. To use htlb pages for the ip4 mtrie,
use the "ip" command-line option "mtrie-hugetlb".
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I5497e426a47200edff2c7e15563ed6a42af12e7f
|
|
Type: fix
Signed-off-by: zhengdelun <xszhengdelun@gmail.com>
Change-Id: I3f6240b4c0798f85960acc55a193a0cbf0c67ea4
|
|
VXLAN uses csum_offload for IPv6 packets.
But without gso node we have csum calculated only for inner
packet.
This patch adds support for outer header csum calculation.
Checksum for inner packet should be calculated before
interface-output node (for example in vxlan node).
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Signed-off-by: Vladimir Isaev <visaev@netgate.com>
Change-Id: Ica68429ede4426293769207cd83c791ebe72fe56
|