summaryrefslogtreecommitdiffstats
path: root/src/vnet/ip
AgeCommit message (Collapse)AuthorFilesLines
2021-01-13ip: vtep fixes for alignment and cache update.v21.01-rc2Ray Kinsella1-2/+2
Minor fixes for Intel AVX-512 alignment, and cache update. Type: fix Signed-off-by: Ray Kinsella <mdr@ashroe.eu> Change-Id: I9f9bebb4ecb3265ffc765affd1ed94d0ba979066 (cherry picked from commit 480600662ccbe6175971053ac732e1e92295a43f)
2020-12-16ip: fix possible missing trace indexesKlement Sekera4-0/+28
Add safeguards when tracing packets to avoid cases where clear trace was issue while buffers were held in reassembly. Type: fix Change-Id: I1bdd1e629e8bc08ce63913fd3c4b2327e47dec04 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2020-12-14misc: move to new pool_foreach macrosDamjan Marion8-49/+49
Type: refactor Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-12-11ip: ip4 rewrite prefetch optimizationPiotrX Kleski1-2/+5
Type: improvement ip4_rewrite_inline_with_gso() did vlib_prefetch_buffer_header() for all nodes. However it is not necessary for ip-rewrite, it is only needed by ip-midchain. This patch makes ip4-rewrite prefetches less buffers to save cycles. Signed-off-by: PiotrX Kleski <piotrx.kleski@intel.com> Change-Id: Ib82dcb0eda4a2d1d7b8d664f2224d49b72aef50f
2020-12-08fib: Adjacency flag for midchain to perfom flow hash (on inner packet)Neale Ranns1-4/+4
Type: feature Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: I964afd9266645de5c87d49c58ce6b48c2c18f97f
2020-12-08fib: Source Address SelectionNeale Ranns4-148/+49
Type: feature Use the FIB to provide SAS (in so far as it is today) - Use the glean adjacency as the record of the connected prefixes = there's a glean per-{interface, protocol, connected-prefix} - Keep the glean up to date with whatever the recieve host prefix is (since it can change) Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: I0f3dd1edb1f3fc965af1c7c586709028eb9cdeac
2020-12-04ip: fixup memory leak in function ip4_full_reass_drop_allbarryxie1-0/+1
Type: fix The vector 'to_free' allocated on heap should be freed to avoid memory leak. Signed-off-by: barryxie <barryxie@tencent.com> Change-Id: I539498b50a7f3e346c83b869fb400868961c233f
2020-11-27ip: Sub Address Family types. Feature enable for each SAFINeale Ranns6-0/+203
Type: improvement Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: I318424ffa569d9a09187066d6ba15576757c1cf6
2020-11-26ip: reassembly - fix handoff for custom nodeKlement Sekera2-21/+111
Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: If484725d48190246e4da09ceaed48a68a8a253f2
2020-11-26ip: trace icmp echo request/reply idKlement Sekera1-0/+6
Type: improvement Change-Id: Ie3a5b182e446c407f258c043c22d1cf25eb7ee59 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2020-11-25api: vat2 and json autogeneration for api messagesOle Troan1-3/+3
VAT2: A completely auto-generated replacement of VAT. Reads input message in JSON from stdin and outputs received messages in JSON. A VAT2 plugin is automatically built for a .api file. There no longer a need for a separate _test.c. Example: vat2 show_version {} { "_msgname": "show_version_reply", "retval": 0, "program": "vpe", "version": "21.01-rc0~411-gf6eb348a6", "build_date": "2020-11-19T09:49:25", "build_directory": "/vpp/autogen3" } vat2 sw_interface_dump '{"sw_if_index": -1, "name_filter_valid": 0, "name_filter": ""}' [{ "_msgname": "sw_interface_details", "sw_if_index": 0, "sup_sw_if_index": 0, "l2_address": "00:00:00:00:00:00", "flags": "Invalid ENUM", "type": "IF_API_TYPE_HARDWARE", "link_duplex": "LINK_DUPLEX_API_UNKNOWN", "link_speed": 0, "link_mtu": 0, "mtu": [0, 0, 0, 0], "sub_id": 0, "sub_number_of_tags": 0, "sub_outer_vlan_id": 0, "sub_inner_vlan_id": 0, "sub_if_flags": "Invalid ENUM", "vtr_op": 0, "vtr_push_dot1q": 0, "vtr_tag1": 0, "vtr_tag2": 0, "outer_tag": 0, "b_dmac": "00:00:00:00:00:00", "b_smac": "00:00:00:00:00:00", "b_vlanid": 0, "i_sid": 0, "interface_name": "local0", "interface_dev_type": "local", "tag": "" }] This is the first phase and vat2 is not integrated in packaging yet. Type: feature Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Ib45ddeafb180ea7da8c5dc274a9274d7a4edc876 Signed-off-by: Ole Troan <ot@cisco.com>
2020-11-20ip-neighbor: Use ip_address_t rather than ip46_address_tNeale Ranns3-3/+19
Type: improvement Change-Id: Ica5f395075677bda5f38d28e704f65350af88610 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-11-13ethernet: mac must support 64-bits loadsBenoît Ganne1-1/+2
ethernet dataplane loads MAC addresses as 64-bits loads for efficiency. We must make sure it is valid, especially for the vector of secondary MACs. Type: fix Change-Id: I851e319b8a973c154e85ff9f05f3b8e385939788 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-11-09vlib: fix trace number accountingBenoît Ganne1-2/+4
When using classifier to filter traces, not all packets will be traced. In that case, we should only count traced packets. Type: fix Change-Id: I87d1e217b580ebff8c6ade7860eb43950420ae78 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-11-05ip: fix doxygen doc for address add/del commandBenoît Ganne1-2/+2
Type: docs Change-Id: I96d5cdb41bd938f06d2d72f2625bf1b3d2c5b1b4 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-11-02ipsec: Tunnel SA DSCP behaviourNeale Ranns3-4/+29
Type: feature - use tunnel_encap_decap_flags to control the copying of DSCP/ECN/etc during IPSEC tunnel mode encap. - use DSCP value to have fixed encap value. Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: If4f51fd4c1dcbb0422aac9bd078e5c14af5bf11f
2020-10-28misc: Break the big IP header files to improve compile timeNeale Ranns17-659/+842
Type: refactor Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: Id1801519638a9b97175847d7ed58824fb83433d6
2020-10-21ip: convert u32 entry_flags to vl_api_mfib_entry_flags_t on mroute APINeale Ranns2-2/+4
Type: fix This is not an API change, it's the same values, just a different named type. also use VppEnum values in tests Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I3a18b529514f3cc9467ae4e8ac3e88d067fc776b
2020-10-21misc: minimize dependencies on udp.hFlorin Coras1-2/+0
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Id13f33843b230a1d169560742c4f7b2dc17d8718
2020-10-19ip: Move the IP6 fib into ip6_[m]fib.cNeale Ranns4-122/+1
Type: improvement reduce the compile time by moving the bihash includes out of ip[46].h Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I6b9216e10aff1013071f9238b3e1ebbdd205bd80
2020-10-12ip: IP6 incorrectly disabled on removing first ip6 prefixNeale Ranns1-1/+3
Type: fix reference counting on the ip6 state was broken, meaning that disabling one of serveral ip6 configs on an interface, completely ip6 disabled the interface. Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ie3af51587310ffe871ad2a9cbd927e15a3ececa9
2020-10-07misc: Purge unused pg includesNeale Ranns2-2/+0
Type: style Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I26a19e42076e031ec5399d5ca05cb49fd6fbe1cd
2020-10-05ipsec: Use bihash for tunnel lookupNeale Ranns1-0/+1
Type: improvement Change-Id: I0c82722dfce990345fe6eeecdb335678543367e0 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-10-02ip: Fix unformat_ip_prefixNathan Skrzypczak1-1/+4
Type: fix Change-Id: I73629ccf7d5a49da3858899dc727cc180fb53003 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2020-09-28classify: preformance improvements in classifiersRay Kinsella1-285/+649
Reworked the code to reduce line fill buffer pressure. Improved compiler loop unrolling, over the existing complex hand-unrolling. Updated the code to use vlib_get_buffers & vlib_buffer_enqueue_to_next. Type: improvement Signed-off-by: Ray Kinsella <mdr@ashroe.eu> Change-Id: I7dca7515ba91672eaf50a6eecd13811210cf0006
2020-09-23ip: use main heap for mtrie, part 2 (remove args)Damjan Marion2-32/+0
Type: improvement Change-Id: I8c28c845c75657852f1e513e2832771fad6b90b7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-09-21ip: use main heap for mtrieDamjan Marion2-51/+0
Main heap can be hugepage backed so it is more efficient to use main heap instead of allocating special heap just for mtrie.... Type: improvement Change-Id: I210912ab8567c043205ddfc10fdcfde9a0fa7757 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-09-18fib: skip byte swap on n_paths in mroute detailsMatthew Smith1-2/+2
Type: fix While preparing to send a ip_mroute_details API message, the number of paths for a multicast route is stored in an int in send_ip_mroute_details(). Before the value in the int is copied into the field n_paths in the API message, the byte order is swapped. This results in n_paths getting set to 0. Change the int to a u8 and omit the byte swap so API clients can receive data on multicast route paths. Change-Id: Ie6dcb0f7b135c5b5deeeb2e44147560dbbb12507 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-09-17teib: Use ip_address_t not ip46_address_tNeale Ranns1-0/+1
Type: improvement Change-Id: Ica75c4e43d6198658a1954640c7ac56ea68bb39a Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-09-04ip: enhance vtep4_check of tunnel by vector wayZhiyong Yang1-0/+42
This patch aims to improve decap performance by reducing expensive hash_get callings as less as possible using AVX512 on XEON. e.g. vxlan, vxlan_gpe, geneve, gtpu. For the existing code, if vtep4 of the current packet match the last vtep4_key_t well, expensive hash computation can be avoided and the code returns directly. This patch improves tunnel decap multiple flows case greatly by leveraging 512bit vector register on XEON accommodating 8 vtep4_keys. It enhances the possiblity of avoiding unnecessary hash computing once hash key of the current packet hits any one of 8 in the 512bit cache. The oldest element in vtep4_cache_t is updated in round-robin order. vlib_get_buffers is also leveraged in the meanwhile. Type: improvement Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com> Signed-off-by: Ray Kinsella <mdr@ashroe.eu> Signed-off-by: Junfeng Wang <drenfong.wang@intel.com> Change-Id: I313103202bd76f2dd638cd942554721b37ddad60
2020-09-01ip: fix ip zero checksum verificationBenoît Ganne3-8/+9
In one's complement, there are two representations of zero: the all zero and the all one bit values, often referred to as +0 and -0. See RFC 1624 section 3 for more details. This used to be taken care of in ip4_header_checksum(), but it is no longer the case. The check ip->checksum == ip4_header_checksum (ip) is no longer correct in the -0 case. Always use ip4_header_checksum_is_valid() instead (which behaves correctly since 9a79a1ab931c3b5a7ae07d6f0fcfef7c4368a2c4). Type: fix Fixes: e5f0050c7a5d411f96af6401797529d58825e2af Change-Id: Iacc6b60645a834287b085aecb9e3fdb4554cf0cf Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-09-01ip: improve ip4_header_checksum_is_validDamjan Marion1-5/+12
It is cheaper to include checksum field in calculation and simply compare result with zero. Type: improvement Change-Id: I6f77632c0a4d2f2c632d044d3a5d2fcf2b5bac62 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-08-31vppinfra: convert A_extend_to_B to B_from_A format of vector inlinesDamjan Marion1-8/+8
Make it shorter and same format when converting to biggor or smaller types. Type: refactor Change-Id: I443d67e18ae65d779b4d9a0dce5406f7d9f0e4ac Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-08-31ip: fix compiling error with gcc-10Jieqiang Wang1-0/+12
Building VPP using gcc-10 fails because of the array bounds check error for function ip4_header_checksum(), with option field in IPv4 header exceeding the ip4_header_t bound. Fix this error by turning off the array bounds check option for function ip4_header_checksum(). Change-Id: I68cc241ae9e403d35ac2e320549506dc6565a0b6 Type: fix Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com>
2020-08-31cnat: Destination based NATNeale Ranns1-0/+35
Type: feature Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I64a99a4fbc674212944247793fd5c1fb701408cb
2020-08-25flow: add vnet/flow formal APIChenmin Sun1-0/+12
This patch adds the API for vnet/flow infra. Currently this API supports the below flow types: VNET_FLOW_TYPE_IP4_N_TUPLE VNET_FLOW_TYPE_IP6_N_TUPLE VNET_FLOW_TYPE_IP4_N_TUPLE_TAGGED VNET_FLOW_TYPE_IP6_N_TUPLE_TAGGED VNET_FLOW_TYPE_IP4_L2TPV3OIP VNET_FLOW_TYPE_IP4_IPSEC_ESP VNET_FLOW_TYPE_IP4_IPSEC_AH VNET_FLOW_TYPE_IP4_GTPU All the above flows are tested with Intel E810/X710 NIC Type: feature Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: Icb8ae20cab9bdad6b120dddc3bd4fb1d85634f3f
2020-08-20ip: vnet_ip_mroute_cmd payload_proto fixElias Rudberg1-6/+6
Make sure payload_proto variable is set properly in vnet_ip_mroute_cmd() function. This avoids using an uninitialized payload_proto value which could lead to assertion failure when using e.g. the ip mroute add command. Type: fix Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net> Change-Id: I8b1d1df02e80150836b7b0448814d8f99747eeed
2020-08-14ip: add VNET_IP_TABLE_ADD_DEL_FUNCTIONSteven Luong2-0/+132
vrf table may be dynamically added or deleted. When the table is deleted, clients who use the corresponding vrf table may need a callback to do the clean up. The mechanism added here is cloned from VNET_SW_INTERFACE_ADD_DEL_FUNCTION. Type: improvement Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I08635c715cd7361a6c359b90890dd3545b0da94c
2020-07-28ip: svr: improve performance for non-fragmentsKlement Sekera1-0/+206
Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: Ia77ce41a8f1a032c5e027c4bb47347752cfda0a9
2020-07-28ip: fix punt cli to only consumes a line of inputBenoît Ganne1-4/+25
Type: fix Change-Id: Idb6f82e08b29e3805ed2133acb5fd7226148f672 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-07-16ip: optimize ip4_header_checksum, take 2Damjan Marion1-32/+72
- add 64-bit version - remove byte swaps, as they are actually not needed Type: improvement Change-Id: Ia1efe54ee80b4ae7633b9ab36b3154c3357006d7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-07-16ip: optimize ip4_header_checksumDamjan Marion1-62/+55
Type: improvement Change-Id: I67bacb90a3dd8a9bd7beb4975ad0fe344675b65f Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-07-14ip: fix format_ip6_address_and_mask() bugChenmin Sun1-3/+2
Previously there's a format_ip4_address in format_ip6... This patch fixes this typo Type: fix Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: Ice124db6594720ed35a992d069341f399c331e1d
2020-07-06ip: set ip4 mask for ip_copy and ip_set when dealing with ip4 typejiangxiaoming1-2/+8
Type: fix Signed-off-by: jiangxiaoming <jiangxiaoming@outlook.com> Change-Id: I3ace7dfe3ddacb4f7fa7a974a2ffe2b3cf902ff9
2020-07-02ip: fix the order in ip4 punt redirectMohsin Kazmi1-2/+2
Type: fix Fixes: a84cb715f5a4366dd2f32de18ad92bec566924da Change-Id: Id448d6ae9cfdd3122e8187121c509412835117c5 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-06-26ip: fix the punt redirect for ip4Mohsin Kazmi1-6/+9
Type: fix Change-Id: I39341f201209931392f315ead5adfddd8b567caf Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-06-12ip: allocate ip4 mtrie pages in htlb memoryDave Barach3-2/+48
No change in default behavior. To use htlb pages for the ip4 mtrie, use the "ip" command-line option "mtrie-hugetlb". Type: improvement Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I5497e426a47200edff2c7e15563ed6a42af12e7f
2020-06-10ip: reassembly: LRU algorithm should eliminate the longest unused nodeszhengdelun2-2/+2
Type: fix Signed-off-by: zhengdelun <xszhengdelun@gmail.com> Change-Id: I3f6240b4c0798f85960acc55a193a0cbf0c67ea4
2020-06-08vxlan: Fixed checksum caclculation offsetVladimir Isaev2-14/+7
VXLAN uses csum_offload for IPv6 packets. But without gso node we have csum calculated only for inner packet. This patch adds support for outer header csum calculation. Checksum for inner packet should be calculated before interface-output node (for example in vxlan node). Type: fix Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Signed-off-by: Vladimir Isaev <visaev@netgate.com> Change-Id: Ica68429ede4426293769207cd83c791ebe72fe56
2020-06-01ip: fix IPv6 mask to prefix length conversionAndreas Schultz1-10/+5
make sure we don't pass a 0 (zero) to log2. Type: fix Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com> Change-Id: Ib3386ad4686835d3836f48294cee4058e897847a