Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Change-Id: I0a947b74e40499327910c1ed10923f7a869039d6
|
|
dd2f12ba made use of ip46_address_is_ip4() in order to determine whether
the address is ipv4 or ipv6 within unformat_ip_address - however, its
logic is correct only for some addresses. e.g. a valid IPv6 address of :: (unspecified)
will result in "true" result. This is probably not an issue for most
of the cases (the unspecified address is quite rare),
however if the unformat_ip_address is used as part of the
prefix parsing, the ::/0 is a fairly often utilized construct,
which gets parsed as 0.0.0.0
Solution: return the old logic, but use a temporary
variable to avoid overwriting the target memory on failure.
Type: fix
Fixes: dd2f12ba6ab952d9d66f4d9ba89ffde6309b1ff2.
Change-Id: I272f740dfdf07036cec68516e153f0701a53233d
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I5eb83cbd0f8534dc50ecb907b3582717e8709aa2
|
|
Type: improvement
Change-Id: Ibf683c9ba8a2751e0b40920f6735cfe0a35a6e6d
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
Type: improvement
Change-Id: I4a75583ce718ba6466cd09ca8373fd43988ef62a
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
Type: improvement
Change-Id: I3fbbda0378b72843ecd39a7e8592dedc9757793a
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
Change-Id: Id8d6ab96a710cdd207068cf19a6363bbcd584de4
Type: improvement
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Change-Id: Ia5ec7fc0c71e6a0ad1b43df24bb6b88e616d260d
Type: improvement
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Need to fill frp_addr for local path, it's used by dpo-receive.
If not, address output can be invalid:
$ sudo vppctl sh ip6-ll fe80::dcad:ff:fe00:3/128
IP6-link-local:loop3, fib_index:2, locks:[IPv6-nd:1, ]
fe80::dcad:ff:fe00:3/128 fib:2 index:55 locks:2
IPv6-nd refs:1 entry-flags:connected,import,local, src-flags:added,contributing,active,
path-list:[72] locks:2 flags:shared,local, uPRF-list:58 len:0 itfs:[]
path:[82] pl-index:72 ip6 weight=1 pref=0 receive: oper-flags:resolved, cfg-flags:local,glean,
[@0]: dpo-receive: 8000:100:fe80::dcad:ff on loop3
forwarding: unicast-ip6-chain
[@0]: dpo-load-balance: [proto:ip6 index:57 buckets:1 uRPF:58 to:[0:0]]
[0] [@2]: dpo-receive: 8000:100:fe80::dcad:ff on loop3
Type: fix
Change-Id: Ib9874c5eac74af789e721098d512a1058cb8e404
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
|
|
Validate version and IHL regardless of present options.
Originally VPP would accept seriously damaged headers in case IHL != 5.
Type: fix
Signed-off-by: Dmitry Valter <d-valter@yandex-team.ru>
Change-Id: Ifd59622efa63dfad7f6e4858dec40ccac3274574
|
|
It's known there're one or more 32-bit increments in the ip
header. So just check ip router alert option length with minimal
performance impact, and don't care of the total options length.
Type: fix
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Signed-off-by: Dmitry Valter <d-valter@yandex-team.ru>
Change-Id: I46dd06516f793846b931a1dc8612f2735f8d24d3
|
|
Type: improvement
Change-Id: I371237803e2c3cb0e1b42b94f422867465e2bff6
Signed-off-by: Damjan Marion <dmarion@me.com>
|
|
client_pathname is usually smaller than pc->caddr.sun_path. snprint()
ensures we stop at the NULL character or sizeof(sun_path) whichever
comes 1st. It also guarantees NULL character termination.
Type: fix
Change-Id: I9fc2a706beab931d50d32d03f7fafca7c6c2fb0b
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I3d36faa60075658fd59eb5bbe16efcb48664691b
|
|
Type: improvement
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I822ead1495edb96ee62e53dc5920aa6c565e3621
|
|
classify hash used to be stored as u64 in buffer metadata, use 32 bits
instead:
- on almost all our supported arch (x86 and arm64) we use crc32c
intrinsics to compute the final hash: we really get a 32-bits hash
- the hash itself is used to compute a 32-bits bucket index by masking
upper bits: we always discard the higher 32-bits
- this allows to increase the l2 classify buffer metadata padding such
as it does not overlap with the ip fib_index metadata anymore. This
overlap is an issue when using the 'set metadata' action in the ip
ACL node which updates both fields
Type: fix
Change-Id: I5d35bdae97b96c3cae534e859b63950fb500ff50
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Added stats for success and failure cases
Fixed Custom app behaviors for the error / drop cases
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Change-Id: Id6e981c7be5c5b3cee5af2df505666d5558da470
|
|
Type: improvement
Change-Id: I85c73cb940d81d0b249eda0d57de135bcd798418
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
When failing to match an ip address, we should not reset the ip address
that could have been initialized by a previous match.
Type: fix
Change-Id: I026766391eb3eb8230f75f66bf4b681e774741d9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
*Buffer leaks and corruptions during internal errors, either overriding
or missing to add the buffer to the list
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Change-Id: I1ead1eca1cde10a36d60dbfcfe36ca6375690b03
|
|
Type: fix
Pace the main thread activity for reassembly timeouts, to avoid barrier syncs
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Change-Id: Iebe9a38d2a7a6471afa6621f12bb545668dc8384
|
|
- update wordlist and fix typos so that 'make docs-spell' passes
- sort spelling_wordlist.txt
- update docs maintainers list
Type: docs
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I38ac7850c604c323427d2bb6877ea98bd10bcc38
|
|
Type: fix
pool_is_free_index() check is performed only for the first element
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Change-Id: Icadc715a9b54761ec69805a134a69a262137536d
|
|
Type: fix
Custom node functionality is missing in v6, so bringing in similar to v4 functionality into ip6 as well
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Change-Id: I28b0be2fc55a00bfc0b456b1caaa1dcf5641a44e
|
|
single struct to hold all api handler, flags, etc.
Provide functions to toggle flags instead of writing directly to
internal data.
Type: refactor
Change-Id: I4730d7290e57489de8eda34a72211527e015b721
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Pace the main thread activity for reassembly timeouts, to avoid barrier syncs
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Change-Id: If8c62a05c7d28bfa6ac530c2cd5124834b4e8a70
|
|
Type: fix
Adding stats from debugging point of view
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Change-Id: I3118d3fd5d630fad80a42ab960e30459789123cf
|
|
Type: fix
as number of reass contexts increasing based on workers, increasing the number of nbuckets for bihash
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Change-Id: I83d061a709ecb8845ce745b18d03fdefc795787f
|
|
Type: fix
Change-Id: I69f7e23b23e8cfcfe57ba019862470e0eb4b06db
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
*Buffer leaks and corruptions during internal errors, either overriding
or missing to add the buffer to the list
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Change-Id: I6c2406cff53a741e800e2d05593696f3e9fd6ff5
|
|
Type: docs
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I23008cde47d8b7a531346eab02902e2ced18742a
|
|
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I952ba7e042779855e29628d048da7edec1caaafd
|
|
Type: fix
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
Change-Id: I792467b73449074e59c4232b1f82d134c399624c
|
|
Type: fix
After changes made in f840880, VRRP IPv6 cannot reply for neighbor
solicitations requesting the link layer address of the configured
virtual address.
VRRP IPv6 enables the vrrp6-nd-input feature in the ip6-local feature
arc for an interface on which a virtual router is configured. When
neighbor solicitations arrive on that interface, ip6-local should start
feature arc walk for that interface and the messages should be processed
by vrrp6-nd-input. The problem is that currently, the feature arc is
started for the interface obtained from the receive DPO that has
interface unset (i.e. max u32) for local mfib entries. Thus, the feature
arc is started not on the interface the messages were received on and
vrrp6-nd-input is not traversed.
With this fix, if interface obtained from the receive DPO is unset, use
RX interface from the buffer to start the ip46-local feature arc.
Also, enable tests of this case for both IPv4 and IPv6 address families
that are currently tagged as extended and not run on every change. They
configure VRRP with priority 255 and are expected to be stable.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I11ef3d5a7a986e04431e8613d1510b8666094bd7
|
|
Use of _vec_len() to set vector length breaks address sanitizer.
Users should use vec_set_len(), vec_inc_len(), vec_dec_len () instead.
Type: improvement
Change-Id: I441ae948771eb21c23a61f3ff9163bdad74a2cb8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
otherwise punt features are applied multiple times to the same packet if enabled multiple times
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: If0cbd9065275f68a10fd6d35e4f7a7c7508245e0
|
|
When computing the inner packet checksum, the code wrongly
assumes that the IP version of the inner packet is the
same of the outer one. On the contrary, it is perfectly
possible to encapsulate v6 packets into v4 and viceversa,
so we need to check the IP format of the inner header before
calling vnet_calc_checksums_inline.
Ticket: VPP-2020
Type: fix
Signed-off-by: Mauro Sardara <msardara@cisco.com>
Change-Id: Ia4515563c164f6dd5096832c831a48cb0a29b3ad
Signed-off-by: Mauro Sardara <msardara@cisco.com>
|
|
ply_create() is not thread safe when the ip4_ply_pool expands.
Type: fix
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: Ie11cc8b1ba587d5e9239a60f4e288492da61368e
|
|
Fixes case when packet to link-local address is received over
gre/mpls or other non-ethernet interface and ip6-ll fib for it
is undefined.
If by a chance ip6-ll fib index is valid, packet will be passed
to some ip6 fib with possibilities to be sent out over unrelated
interface or be looped again into ip6-link-local dpo till oom
and crash.
Type: fix
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: Ie985f0373ea45e2926db7fb0a1ff951eca0e38f6
|
|
Type: fix
otherwise if two packets arrive with the same source address but from different VRFs, then they are treated as the same and they use the same LB and thus share the same fate. but the lookup, when done, results in two different LBs, and hence the fate can be different.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Id6e16f7c577a561d9ddd7066339fa4385361d07f
|
|
Type: improvement
This also makes the is_white_space function
public
Change-Id: Ifc1c0d4509f3ecae14f09bb5fa7a2eea33c49b09
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: refactor
Change-Id: I3625eacf9e04542ca8778df5d46075a8654642c7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
There is no need to verify the checksum for packets that have the IP
checksum offload flag set. This uses the same logic as
ip4_ttl_and_checksum_check.
Type: fix
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
Change-Id: I177b07212a992362a4c965c074dcecf1e504c593
|
|
Type: fix
The l2unfragmentable size is not included in the calculation of 'max', the maximum amount of data that can be added to a fragment, therefore the fragments created are too big.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Id1e949ad98203b6f8ea2f55322ef6fa3d507e2a6
|
|
While setting an ACL, a user can specify the adjacency to follow after
the input ACL node. Thus, we may skip a lookup and enter directly a
local node (ex: ip4_local). To prevent the local source check from
failing, we need to specify the fib index. And, we have to do it just
before exiting the input ACL node because the l2_classify object
is overlapping with the fib_index in the vnet_buffer_opaque_t struct.
We could have added a padding to avoid this overlap but there is no
place for that in the structure.
Type: fix
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Change-Id: I383c36e4aec08d181f966f28565aefed950d2a74
|
|
Type: fix
- IPv6 fragmentation did not work if the packet spaneed multiple buffers, because the 'len' calculation to did max out at the size of a buffer
- IPv6 fragmentation did not work when the l2unfragmentable size was non-zero, it was not used in the correct places
- IPv6oMPLS fragmentation would fragment all IPv6, it should do so only for link local
- IPv6oMPLS should send back TooBig ICMP6 for non locally generated
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ie8f02cdfdd7b7e8474e62b6d0acda8f20c371184
|
|
Type: improvement
For error conditions, such as TTL expired, dest unreach, etc, Rate limit the sending of ICMP error messages.
The rate limiting is done based on src,dst IP address of the received packet.
the rate limit has been chosen, somewhat arbitrarily, to be 1e-3. This is the same limit as the ARP throttling.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I4a0b791cde8c941a9bf37de6aa5da56779d3cef4
|
|
ip6_ext_hdr_chain_t->eh is IP6_EXT_HDR_MAX elements.
Type: fix
Change-Id: I28b8d610d8f5c0c520c8391c37b86e837655ab12
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: refactor
check for pool expansion in the DPO allocation, just in case.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I6ba7dd66313630d3f24a51700ab4486ba43d856b
|
|
Type: refactor
To be consistent with the location of the IPv4 responder
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ie3a5c3ecc10755317591d7ff57b74770c2798e77
|