Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ida8f9e759b4990ea6e34e71dc45bdb3b5eabc27f
|
|
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I9d25129fbf1ea880121b281f41750155286fb489
|
|
Type: fix
this is mainly cosmetic, assuming users use the symbolic names,
since VPP's API types encode/decode functions corrected the values
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Iecbb8102aee64b2565a3fc89a30cad73a935269d
|
|
Type: fix
it was marked MP safe in the CLI (which it shouldn't be) but
it it not marked MP safe on the API.
Change-Id: I4bdea498a510a8b406d13d62a899b6d03656f7e8
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Translation of ICMPv6 error messages to ICMP error messages fails
because the sender port is not set that leads to securtiy check
failure.
With this commit, during ICMPv6 error messages translation, get the
sender port value from the inner packet.
Type: fix
Change-Id: I1ee295a3685fab4837172edfb629a699f49afbee
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: fix
Signed-off-by: Jawahar Santosh Gundapaneni <jgundapa@cisco.com>
Change-Id: Ife0f7749a72cc834a3d811f8cf6b5a0840157014
|
|
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I6b2c7550ae5918c27b02b1173533d2042c6c15c7
|
|
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I73d27520726543d6375caad76a841339f68c3533
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Type: improvement
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ia8dff15855a81cf29729bdaa3ff28fbe3254fa97
|
|
Type: improvement
type re-use.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ic2a2e6babf9ae66a1e53aec53a6cd157e1893dc8
|
|
Bypass node MUST NOT intercept a packet if destination IP doesn’t match
a local address. However IP address interpretation depends on the VRF,
hence bypass node must take that into account.
This patch also factors-out common VTEP management and checking code.
Type: improvement
Signed-off-by: Nick Zavaritsky <nick.zavaritsky@emnify.com>
Change-Id: I5665d94882bbf45d15f8da140c7ada528ec7fa94
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ifb310d6378c77ed9d3aae994897ca71ba8c44fa2
|
|
build vat with src/vnet/ip/ip_types_api.c
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Iab0f18bf7a89cf9512beab0629bc3a349edec383
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
- Remove vl_api_from_api_string
to prevent use of not nul-terminated strings.
- Rename vl_api_from_api_to_vec -> vl_api_from_api_to_new_vec
to imply a new vector is created. NOT nul terminated.
- Add vl_api_from_api_to_new_c_string. Returns
nul terminated string in a new vector.
- Add vl_api_c_string_to_api_string. Convert nul terminated
string to vl_api_string_t
- Add vl_api_vec_to_api_string. Convert NON nul terminated
vector to vl_api_string_t
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Iadd59b612c0d960a34ad0dd07a9d17f56435c6ea
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Type: improvement
allow clients that allocate punt reasons to pass a callback function
that is invoked when the first/last client registers to use/listen on
that punt reason. This allows the client to perform some necessary
configs that might not otherwise be enabled.
IPSec uses this callback to register the ESP proto and UDP handling
nodes, that would not otherwise be enabled unless a tunnel was present.
Change-Id: I9759349903f21ffeeb253d4271e619e6bf46054b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Iaba2ab11bfaa1c8db4023434e3043ac39500f938
|
|
Type: fix
Change-Id: I048c9ed423ca2993d2179cdce364ac98980311bb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
The mheap allocator has been turned off for several releases. This
commit removes the cmake config parameter, parallel support for
dlmalloc and mheap, and the mheap allocator itself.
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I104f88a1f06e47e90e5f7fb3e11cd1ca66467903
|
|
Upon encapsulation of L2 frames, IETF has replaced the NextHeader value from 59 (IPv6 No Next Header) to 143 (Ethernet).
https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml
Type: fix
Signed-off-by: pcamaril <pcamaril@cisco.com>
Change-Id: I88aa5590c81d16700ff7a0bbe6337e113179496e
Signed-off-by: pcamaril <pcamaril@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie8bc5c9a03e858487cf565b4e9b520e6b496337a
|
|
Options like:
expire_walk_interval_ms,max_reassemblies,timeout_ms
can be configured via API, but it's impossible to
check them using vppctl, but this can be a useful
feature
Type: feature
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: Iac8a96201a7a70b82e9852edc89b819c5d451a58
|
|
L4 checksums for IPv6 should be calculated using a pseudo header that
includes the source/destination addresses, payload length, and payload
protocol.
ip6_tcp_udp_icmp_compute_checksum() was using the payload length and
protocol from the IPv6 header. If there is a hop-by-hop header (or any
other extension header), the payload length used for the pseudo header
should only include the upper layer header and payload and not the
extension header bytes. Same deal with the protocol, the upper layer
next header value should be used instead of the extension header.
Type: fix
Fixes: cb9cadad57
Change-Id: Ifa2c9ad41c0fc4eea674f0671255b637c8e01f71
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
The first translated ICMPv6 packet of a fragmented ICMP message does
not have a IPv6 fragment header. All subsequent have.
With this commit, add a IPv6 fragment header to the first translated
ICMPv6 packet.
Type: fix
Change-Id: Id89409ce7273cbeed801e2e18a09d3e7c3c4e4bc
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: feature
common funcitons across IP-in-IP and GRE tunnels for encap/decap
functions
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I325b66824878d843af167adfe5a7a96b0ab90566
|
|
By aligning vnet_buffer_opaque.ip.save_rewrite_length and
vnet_buffer_opaque.ip.reass.save_rewrite_length we prevent shallow
virtual reassembly code from overwrite save_rewrite_length, allowing
other features down the pipe to rely on this value.
A static assert is added to guard this alignment.
Type: fix
Fixes: f126e746fc01c75bc99329d10ce9127b26b23814
Change-Id: Ie7c7f3abc2a221bbcf2830c0f006a4368088b342
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
All translated ICMPv6 packets that exceed the minimal IPv6 MTU get
truncated but according to RFC 4443 2.4 only ICMPv6 error messages
(type < 128) need to be truncated.
With this commit, truncate only ICMPv6 error messages.
Type: fix
Change-Id: Ic455352de2ff4ff6aa3421b46a2a54923f2d3f80
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: refactor
currently vnet_classify.h is included in ip.h where it's not required.
Change-Id: Id55682637601655aa2edda681536a979c8e323bd
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Fixes: be2286b0
This patch does following:
- If terminating frame has consecutive packets with same source IP, this patch
avoids fib lookup for those packets in ip4-local node. This drops cycle count
for ip4-local node on both ARM and x86. It being done by enabling dead code in
else {} case of ip4_local_check_src_x2() and ip4_local_check_src() functions.
- In case all packets in terminating frame have unique source IP (e.g:
incrementing), ip4-local is costlier by 2 cycles (broadwell)
Change-Id: I472ddc324716cec8bfe601568b8aeb7565f97ab3
Signed-off-by: Nitin Saxena <nsaxena@marvell.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I17b95bba2327049d2b99e59cea79208814a24b22
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Remove NAT's implementation of shallow virtual reassembly with
corresponding CLIs, APIs & tests. Replace with standalone shallow
virtual reassembly provided by ipX-sv-reass* nodes.
Type: refactor
Change-Id: I7e6c7487a5a500d591f6871474a359e0993e59b6
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: style
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Idfcd4a363d4582ce69fac83ddc760f2dc4feed52
|
|
Make the help string consistent with the cli parser.
Type: fix
Change-Id: I7140bd589c2a94dbf5af5cc633cb495457a6af22
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
- ip-neighbour: generic neighbour handling; APIs, DBs, event handling,
aging
- arp: ARP protocol implementation
- ip6-nd; IPv6 neighbor discovery implementation; separate ND,
MLD, RA
- ip6-link; manage link-local addresses
- l2-arp-term; events separated from IP neighbours, since they are not
the same.
vnet retains just enough education to perform ND/ARP packet
construction.
arp and ip6-nd to be moved to plugins soon.
Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Change-Id: I28f7a658be3f3beec9ea32635b60d1d3a10d9b06
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I9498b660bf2045bb6aac96d19bb9456a14b35847
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I1fd190da28a765ba430952539c291a741aaa3dce
|
|
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I2272521d6e69edcd385ef684af6dd4eea5eaa953
|
|
Delete Null-checking "p0" in function ip6_tcp_udp_icmp_bad_length,
because it's not necessary.
Type: fix
Signed-off-by: johny <jan.cavojsky@pantheon.tech>
Change-Id: I2bf43a60c1c1d76e42581df27f2285c9e9563093
|
|
This fix is for cancel termination of vpp after receive malformed
packet type of ip6.To avoid termination of vpp are checked if are
missing data in packet. This occours, when payload length in ip6
header packet is more than real count of data in packet. When
this error occours, packet is ignore.
Type: fix
Ticket: VPP-1693, VPP-1694
Change-Id: I9d9ecea7b75c8702cb31aa8051c8d4d7ce19659d
Signed-off-by: johny <jan.cavojsky@pantheon.tech>
|
|
Type: feature
the fib_source_t enum alone no longer defines the priority and
behaviour, instead each source must be allocated these attributes.
This allows the creation of other sources by the plugins (and
soon over the API).
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I890ee820fbc16079ee417ea1fbc163192806e853
|
|
Type: refactor
Change-Id: I51405b9d09fb6fb03d08569369fdd4e11c647908
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Fixes: cb9cadad578297ffd78fa8a33670bdf1ab669e7e
Change-Id: Id6de9780da41db5d762fe042f533cfaf21ed7b73
Reported-by: Rajith PR <rajith@rtbrick.com>
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Type: fix
Fixes: de34c35fc
The API handler for requests to retrieve IP reassembly settings was
modified to support shallow virtual reassembly. It retrieves
settings into local variables now instead of directly into the reply
message. The fields in the reply message were not being populated
using those variables. So the reply message was being sent with all
0's, except in the is_ip6 field.
Also, the max_reassembly length field in the reply message was not
being populated.
Change-Id: I80b071340fdc190c3a0b1f7294a03f14b6e00ecc
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: refactor
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I3aad20b35d89fc541fdf185096d71ca12b09a6e2
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I9467f11775936754406892b8e9e275f989ac9b30
|
|
Type: fix
Change-Id: I87503b9a981724b1f3ff1c45a4a5f7a43024ca76
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
from the API doc, a table replace is:
"
The use-case is that, for some unspecified reason, the control plane
has a very different set of entries it wants in the table than VPP
currently has. The CP would thus like to 'replace' VPP's current table
only by specifying what the new set of entries shall be, i.e. it is not
going to delete anything that already eixts.
the CP delcartes the start of this procedure with this begin_replace
API Call, and when it has populated all the entries it wants, it calls
the below end_replace API. From this point on it is of coursce free
to add and delete entries as usual.
The underlying mechanism by which VPP implements this replace is
purposefully left unspecified.
"
In the FIB, the algorithm is implemented using mark and sweep.
Algorithm goes:
1) replace_begin: this marks all the entries in that table as 'stale'
2) download all the entries that should be in this table
- this clears the stale flag on those entries
3) signal the table converged: ip_table_replace_end
- this removes all entries that are still stale
this procedure can be used when an agent first connects to VPP,
as an alternative to dump and diff state reconciliation.
Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
Change-Id: I204f3f8eebc5f5d5a377e91262f91c615fd00168
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
Change-Id: I2c6b59013bfd21136a2955442c779685f951932b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This provides a functional interface to IP fragmentation.
Allowing external features to fragment. Supports
arbitrary encap size, for e.g. MPLS or inner fragmentation
of tunnels.
This also removed dual loop in MAP that was fundamentally broken.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ia89ecec8ee3cbe2416edbe87630fdb714898c2a8
Signed-off-by: Ole Troan <ot@cisco.com>
|