Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Fixes: cb9cadad578297ffd78fa8a33670bdf1ab669e7e
Change-Id: Id6de9780da41db5d762fe042f533cfaf21ed7b73
Reported-by: Rajith PR <rajith@rtbrick.com>
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Type: fix
Fixes: de34c35fc
The API handler for requests to retrieve IP reassembly settings was
modified to support shallow virtual reassembly. It retrieves
settings into local variables now instead of directly into the reply
message. The fields in the reply message were not being populated
using those variables. So the reply message was being sent with all
0's, except in the is_ip6 field.
Also, the max_reassembly length field in the reply message was not
being populated.
Change-Id: I80b071340fdc190c3a0b1f7294a03f14b6e00ecc
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: refactor
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I3aad20b35d89fc541fdf185096d71ca12b09a6e2
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I9467f11775936754406892b8e9e275f989ac9b30
|
|
Type: fix
Change-Id: I87503b9a981724b1f3ff1c45a4a5f7a43024ca76
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
from the API doc, a table replace is:
"
The use-case is that, for some unspecified reason, the control plane
has a very different set of entries it wants in the table than VPP
currently has. The CP would thus like to 'replace' VPP's current table
only by specifying what the new set of entries shall be, i.e. it is not
going to delete anything that already eixts.
the CP delcartes the start of this procedure with this begin_replace
API Call, and when it has populated all the entries it wants, it calls
the below end_replace API. From this point on it is of coursce free
to add and delete entries as usual.
The underlying mechanism by which VPP implements this replace is
purposefully left unspecified.
"
In the FIB, the algorithm is implemented using mark and sweep.
Algorithm goes:
1) replace_begin: this marks all the entries in that table as 'stale'
2) download all the entries that should be in this table
- this clears the stale flag on those entries
3) signal the table converged: ip_table_replace_end
- this removes all entries that are still stale
this procedure can be used when an agent first connects to VPP,
as an alternative to dump and diff state reconciliation.
Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
Change-Id: I204f3f8eebc5f5d5a377e91262f91c615fd00168
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
Change-Id: I2c6b59013bfd21136a2955442c779685f951932b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This provides a functional interface to IP fragmentation.
Allowing external features to fragment. Supports
arbitrary encap size, for e.g. MPLS or inner fragmentation
of tunnels.
This also removed dual loop in MAP that was fundamentally broken.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ia89ecec8ee3cbe2416edbe87630fdb714898c2a8
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Autoconfigure router advertisements for delegated prefixes.
Clean up a longstanding issue. If vpp receives a dhcpv6 renew reply,
do NOT reset per-delegated-prefix timers. That prevented vpp from
sending a solicit to renew the delegation on time. That, in turn
caused the RA code to send advertisements with valid_time =
preferred_time = 0. That causes almost any downstream client to throw
away its delegated address.
Miscellaneous changes
o src/vnet/ip/ip6_neighbor.c - always memset elements allocated from pools
to zero. DGMS.
o Remove debug spew from the ipv6 connection-tracker plugin
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I428feccdc47efdc413898600e0d62916928a6eb7
|
|
Type:feature
For cases when proxy is in use IPv6 flow label received in origin pkt needs to be added
to ipv6 header of outgoing pkts from proxy to original destination and vice versa.
Signed-off-by: Tarun Gupta <tarungup@cisco.com>
Change-Id: I143f7e67237c0f865333078628a016b50ad5e630
Signed-off-by: Tarun Gupta <tarungup@cisco.com>
|
|
Type: fix
if the packet is about to be fragmented, then don't call any of the
actions that expect the rewrite to have been written.
1) don't double count packets thru the adjacency (original & fragments)
2) don't double decrement the TTL for fragments
3) return to ip4-midchain post ip-frag if that's where we started.
4) only run midchain/mcast fixups if not fragmenting (if no errors)
Change-Id: Ib2866787a42713ee5871b87b597d8f74b901044b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: style
Change-Id: I7d44b7fab1b8b196e4934cb4832ee51084c5bf98
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
ip4_mtrie used full memory barrier compare-and-swap in set_leaf () and
set_root_leaf () even though only one thread updates the trie. Replaced
such instances of compare-and-swap with atomic store-release.
Type: refactor
Change-Id: Ic6e3c84480697915541acd16dcc630d1c436137d
Signed-off-by: Jason Zhang <jason.zhang2@arm.com>
Reviewed-by: Lijian Zhang <Lijian.Zhang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
|
|
ip4_mtrie set leaves atomically in set_leaf () and set_root_leaf () but
deleted leaves using regular stores in unset_leaf () and unset_root_leaf ().
Changed leaf deletion to update mtrie using atomic store-release.
Slight performance improvement was observed in benchmarking on Qualcomm
and Xeon machines. Benchmarking involved running 'ip route add' and
'ip route del' on vpp instances. Below are the routes/second for adding
and deleting 100k routes before and after the store-release changes:
Xeon Add Routes Before: 1.140e6, 1.139e6, 1.148e6, 1.158e6, 1.155e6
Xeon Add Routes After: 1.167e6, 1.170e6, 1.174e6, 1.173e6, 1.169e6
Xeon Del Routes Before: 7.287e7, 8.089e7, 6.048e7, 7.171e7, 7.821e7
Xeon Del Routes After: 8.729e7, 7.353e7, 7.856e7, 8.209e7, 7.787e7
Qualcomm Add Routes Before: 3.709e5, 3.954e5, 3.739e5, 3.759e5, 3.671e5
Qualcomm Add Routes After: 3.879e5, 3.967e5, 3.936e5, 3.764e5, 3.817e5
Qualcomm Del Routes Before: 1.286e7, 1.379e7, 1.353e7, 1.230e7, 1.331e7
Qualcomm Del Routes After: 1.411e7, 1.355e7, 1.373e7, 1.394e7, 1.314e7
Type: refactor
Change-Id: If3acd25a2fb87addd0eb13d82d3c8f46579e8060
Signed-off-by: Jason Zhang <jason.zhang2@arm.com>
Reviewed-by: Lijian Zhang <Lijian.Zhang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
|
|
Type: feature
Change-Id: Ib137c453ff2dd5b9d028c653afa80e6b2b81b9e0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Change-Id: I246346b82858e73b16d727e2106350bc0fc3c6f2
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
use correct value for sanity checks
Type: fix
Change-Id: If33db5ce3e4a26f7876c2a67832ca2947563e211
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
This fixes incorrect tracing of flags such as MORE_FRAGMENTS.
Type: fix
Change-Id: Ia5698418a7cbb45c18bc9c95f560cea020e63c39
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
When processing the last buffer of a reassembled packet, the current
buffer will be freed and must be reloaded using the updated index.
Type: fix
Change-Id: Ib39e29e60eb527b4cd4828a3aa37d82c8dddd709
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
- when the addresses were learnt a copy of the client was sent to the
main thread, this meant the unicast adjacecny was saved on the copy
not on the original.
- Add logging.
- Improve the proxy-node that hands the clint packets so the DHCP
packets are traced.
- allow a renewal to configure new address data
Change-Id: I6ab0afcccbc4a1cdefdd1b8beeda8fc7ba20ec1f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: style
Change-Id: I620f15b96ee5401e0145a139f06d343d7c4fadb4
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I7048f8ec598a8b06d75bdfb5d2fab9f6337c9474
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I1cc42b57fbf72e2ced8b5d1283c34de2f7ff948a
|
|
Type: refactor
Change-Id: I51d5bf54dfd408aa0c406cbdf0f4be10ef19d10d
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
This change adds tracing of IP headers when doing a handoff between
worker threads. This eases debugging.
Type: feature
Change-Id: I2195b070a364cba13a658ec1cee5154fc4c3a8b0
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Change-Id: Ie436d51999dc1384a0db492f28a7e66620e14551
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
The non-extern declaration confuses clang linker in debug mode.
The function is defined as inline above anyway.
Type: fix
Fixes: c6215d902f
Change-Id: Ic7e4477631cf0bcfb31ab3f81effe3642dd4223e
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Based on the configuration, we can disable checksum offload capability
and calculate checksum while pushing the TCP & IP header.
This saves some cycles when VPP stack is used in legacy hardware devices.
Signed-off-by: Srikanth A <srakula@cisco.com>
Change-Id: Ic1b3fcf3040917e47ee65263694ebf7437ac5668
(cherry picked from commit 3642782a2748503f5b5ccf89d1575c1d489948ef)
|
|
Remove map's implementation of reassembly and use common
ip6-full-reassembly functionality. This makes it easier to maintain by
removing duplicate code/functionality.
Type: refactor
Change-Id: I430e888b704e28c100a9ce075d1460cb529e4676
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Fixes: 0eb75d0e9c7624a4e8ac69fea7dbe12d39b75096
Change-Id: I8bcdc06b33bf4e12752b90dc3445fa51af552a46
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Signed-off-by: Rajesh Goel <rajegoel@cisco.com>
Change-Id: Ie4372c5cf58ab215cdec5ce56f8a994daaba2844
|
|
otherwise they get installed twice and the reference counting means they are not removed.
This is the same behaviour as IPv4.
Type: fix
Change-Id: I9266e04ccff6ff06a577e85973a2ddbeb9dfc52b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Fixes: de34c35fc73226943538149fae9dbc5cfbdc6e75
Change-Id: Ia714c2e46627864091d3f686dbced4cdd9c1a773
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: feature
Change-Id: I0e049b28d8c21b67ea4545e865eda4e88f10e485
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Fixes: de34c35fc73226943538149fae9dbc5cfbdc6e75
Change-Id: I256ef153b3b27a1f7ab7daa45015a2ec4bc84076
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Fixes: de34c35fc73226943538149fae9dbc5cfbdc6e75
Change-Id: I79589f648f4c75762e5277fb94636a91fa36ccdd
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Change-Id: I7ed9726d8c5ca26715a84b004a18fd7f93142486
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I35fb6fdfba50c4a59cf1ffb94cb51487bcf5afc9
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I46b166b3a10c4543eafa4422531dd3c725db45f1
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: I6fd7bb27b95a50d37424f65dc51e8b341f8b1b28
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Reference counts need to be per-interface as opposed to global. This
allows configuring the feature on more than one interface correctly.
Type: fix
Fixes: de34c35fc73226943538149fae9dbc5cfbdc6e75
Change-Id: I05534ac59fa86e67290737ec6c61df2c19acab48
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
- ip{4,6}_reass_finalize() frees the reassembly context: do not access
it after the call.
- traces access reassembly context: free it after and not before
tracing.
Type: fix
Change-Id: Ia3aaea9c7b74932e249e013be04b9bd7298fd187
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Change-Id: Ibc8334e26c7e6f6120696c3e313b6e11d73dab99
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Change-Id: I5a5461652f8115fa1270e20f748178fb5f5450f2
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Split generation of API message enum and the typedefs into
separate files, so that the type file can be included from
elsewhere.
Generate a C file for VPP that contains the API registration,
this was previously done via X macros by the C pre-
processor.
This allows deleting lots of skeleton/copy paste code
for each feature.
plugins/flowprobe
plugins/map
examples/sample-plugin
vnet/ipip
used as Guinea pigs.
Generate a C Test file for VAT, that does the same for VAT plugins.
Also add support for a per-message CLI option, that is currently
limited to VAT help text. option vat_help = "<help text>";
Type: refactor
Change-Id: I245e3104bb76f7e1fb69a59ab20cc7c8dfcdd460
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: fix
Change-Id: I1af0e4a9bc23a3b6b6d3a74df093801ab6cae1f8
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
|
|
this is a preparation step for introducing other reassembly types
Type: refactor
Change-Id: I197e299dbd729b00eead31667913b8ceff915d63
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: feature
Change-Id: I913f08383ee1c24d610c3d2aac07cef402570e2c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Iad7067962b1dd8d3a1335f07e89a62f901e82dff
|