Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
The init of fib_index_by_sw_if_index wasn't
setting default value to 0. Which we now
need for setting interfaces unnumbered
Change-Id: Ie5be9b5e5373ef055557a871ad4d1c45fbfc1dee
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Id7b27edf3712aaa3c277e752b9ca78bb91d184a1
|
|
Type: feature
The added functionality is to support copying TTL and flow label from
inner to outer. The .api was extened to support expressing this and also
adding a common tunnel endpoint type. i find it best to make API changes
in one patch so there are less versions of the API.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I755c1e3f4c475058792af39c1abeda92129efb76
|
|
Type: feature
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ief1755131297afcaa14fe74fd8dd28c71a92fbe6
|
|
Change-Id: I53011e089bfecb08483792029b534b09b9e33a10
Type: improvement
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Type: improvement
Change-Id: Ica75c4e43d6198658a1954640c7ac56ea68bb39a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I6fdc4e952097e92ac3aa53e0be3ef99e0d801b28
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: improvement
- inline some common encap fixup functions into the midchain
rewrite node so we don't incur the cost of the virtual function call
- change the copy 'guess' from ethernet_header (which will never happen) to an ip4 header
- add adj-midchain-tx to multiarch sources
- don't run adj-midchain-tx as a feature, instead put this node as the
adj's next and at the end of the feature arc.
- cache the feature arc config index (to save the cache miss going to fetch it)
- don't check if features are enabled when taking the arc (since we know they are)
the last two changes will also benefit normal adjacencies taking the arc (i.e. for NAT, ACLs, etc)
for IPSec:
- don't run esp_encrypt as a feature, instead when required insert this
node into the adj's next and into the end of the feature arc. this
implies that encrypt is always 'the last feature' run, which is
symmetric with decrypt always being the first.
- esp_encrpyt for tunnels has adj-midchain-tx as next node
Change-Id: Ida0af56a704302cf2d7797ded5f118a781e8acb7
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
The Tunnel Endpoint Informatiob Base (TEIB) is a better
description of what it is (a mapping between tunnel endpoint
address, in the overlay, and next-hop address, in the underlay)
whereas NHRP is one instanc eof a control protocol that might add
such endpoints.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Idcb2ad0b6543d3e5d9f6e96f9d14dafb5ce2aa85
|
|
Type: feature
common funcitons across IP-in-IP and GRE tunnels for encap/decap
functions
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I325b66824878d843af167adfe5a7a96b0ab90566
|
|
Type: feature
plus fixes for gre
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I0eca5f94b8b8ea0fcfb058162cafea4491708db6
|
|
Type: refactor
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I18dcdb7af3e327f6cacdbcb1e52b89f13d6ba6e2
|
|
Type: fix
Change-Id: Ib00ab9b2f28c0f4d85e96bf95697f61b8e415f37
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: refactor
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I3aad20b35d89fc541fdf185096d71ca12b09a6e2
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I9467f11775936754406892b8e9e275f989ac9b30
|
|
please consult the new tunnel proposal at:
https://wiki.fd.io/view/VPP/IPSec
Type: feature
Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
this can be used by e.g. tunnels so it doesn't need to be
implemented for each tunnel type.
Change-Id: I0790f89aa49f83421612b35108cce67693285999
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
if a tunnel's destination address is reachable through the tunnel
(see example config belwo) then search for and detect a recursion
loop and don't stack the adjacency. Otherwise this results in a
nasty surprise.
DBGvpp# loop cre
DBGvpp# set int state loop0 up
DBGvpp# set int ip addr loop0 10.0.0.1/24
DBGvpp# create gre tunnel src 10.0.0.1 dst 1.1.1.1
DBGvpp# set int state gre0 up
DBGvpp# set int unnum gre0 use loop0
DBGvpp# ip route 1.1.1.1/32 via gre0
DBGvpp# sh ip fib 1.1.1.1
ipv4-VRF:0, fib_index:0, flow hash:[src dst sport dport proto ] locks:[src:plugin-hi:2, src:default-route:1, ]
1.1.1.1/32 fib:0 index:11 locks:4 <<< this is entry #11
src:CLI refs:1 entry-flags:attached, src-flags:added,contributing,active,
path-list:[14] locks:2 flags:shared,looped, uPRF-list:12 len:1 itfs:[2, ]
path:[14] pl-index:14 ip4 weight=1 pref=0 attached-nexthop: oper-flags:recursive-loop,resolved, cfg-flags:attached,
1.1.1.1 gre0 (p2p)
[@0]: ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800
stacked-on entry:11: <<<< and the midchain forwards via entry #11
[@2]: dpo-drop ip4
src:recursive-resolution refs:1 src-flags:added, cover:-1
forwarding: unicast-ip4-chain
[@0]: dpo-load-balance: [proto:ip4 index:13 buckets:1 uRPF:12 to:[0:0]]
[0] [@6]: ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800
stacked-on entry:11:
[@2]: dpo-drop ip4
DBGvpp# sh adj 1
[@1] ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800
stacked-on entry:11:
[@2]: dpo-drop ip4
flags:midchain-ip-stack midchain-looped <<<<< this is a loop
counts:[0:0]
locks:4
delegates:
children:
{path:14}
Change-Id: I39b82bd1ea439be4611c88b130d40289fa0c1b59
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- Error where ICMPv6 error code doesn't reset VLIB_TX = -1
Leading to crash for ICMP generated on tunnelled packets
- Missed setting VNET_BUFFER_F_LOCALLY_ORIGINATED, so
IP in IPv6 packets never got fragmented.
- Add support for fragmentation of buffer chains.
- Remove support for inner fragmentation in frag code itself.
Change-Id: If9a97301b7e35ca97ffa5c0fada2b9e7e7dbfb27
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I63c36644c9d93f2c3ec6606ca0205b407499de4e
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
This patch separates setting of hardware interfaec and software
interface MTU. Software MTU is L2 payload MTU (i.e. not including L2
header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set.
Currently only IP4, IP6 are enabled in adjacency / rewrite code.
Documentation in src/vnet/MTU.md
Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Add support for either copying TOS/TC from inner packet to outer,
or set to fixed value.
Change-Id: I716a95f875349acec94317b266c8cf9f2f81a785
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
interface)"
This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa.
Reverting as this patch is causing following crash:
0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails
Aborted
Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I166301c9e2388bae5f70ec0179d663a2703e27f5
Signed-off-by: Ole Troan <ot@cisco.com>
|