Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: improvement
- inline some common encap fixup functions into the midchain
rewrite node so we don't incur the cost of the virtual function call
- change the copy 'guess' from ethernet_header (which will never happen) to an ip4 header
- add adj-midchain-tx to multiarch sources
- don't run adj-midchain-tx as a feature, instead put this node as the
adj's next and at the end of the feature arc.
- cache the feature arc config index (to save the cache miss going to fetch it)
- don't check if features are enabled when taking the arc (since we know they are)
the last two changes will also benefit normal adjacencies taking the arc (i.e. for NAT, ACLs, etc)
for IPSec:
- don't run esp_encrypt as a feature, instead when required insert this
node into the adj's next and into the end of the feature arc. this
implies that encrypt is always 'the last feature' run, which is
symmetric with decrypt always being the first.
- esp_encrpyt for tunnels has adj-midchain-tx as next node
Change-Id: Ida0af56a704302cf2d7797ded5f118a781e8acb7
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I008f23b5f0c7269ddd35cc747a867240fbe9c49b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
The Tunnel Endpoint Informatiob Base (TEIB) is a better
description of what it is (a mapping between tunnel endpoint
address, in the overlay, and next-hop address, in the underlay)
whereas NHRP is one instanc eof a control protocol that might add
such endpoints.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Idcb2ad0b6543d3e5d9f6e96f9d14dafb5ce2aa85
|
|
Type: feature
common funcitons across IP-in-IP and GRE tunnels for encap/decap
functions
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I325b66824878d843af167adfe5a7a96b0ab90566
|
|
Type: feature
plus fixes for gre
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I0eca5f94b8b8ea0fcfb058162cafea4491708db6
|
|
Type: refactor
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I18dcdb7af3e327f6cacdbcb1e52b89f13d6ba6e2
|
|
Type: fix
Change-Id: Ib00ab9b2f28c0f4d85e96bf95697f61b8e415f37
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: refactor
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I3aad20b35d89fc541fdf185096d71ca12b09a6e2
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I9467f11775936754406892b8e9e275f989ac9b30
|
|
Type: feature
fts and trex rely on yaml config files. Verify
that they are valid, so comitters can catch
errors early.
Change-Id: Ide0bb276659119c59bdbbc8b8155e37562a648b8
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Signed-off-by: Ignas Bacius <ignas@noia.network>
Change-Id: Ica069e8c9dd4efd1f00639754da471bf11418b57
|
|
Split generation of API message enum and the typedefs into
separate files, so that the type file can be included from
elsewhere.
Generate a C file for VPP that contains the API registration,
this was previously done via X macros by the C pre-
processor.
This allows deleting lots of skeleton/copy paste code
for each feature.
plugins/flowprobe
plugins/map
examples/sample-plugin
vnet/ipip
used as Guinea pigs.
Generate a C Test file for VAT, that does the same for VAT plugins.
Also add support for a per-message CLI option, that is currently
limited to VAT help text. option vat_help = "<help text>";
Type: refactor
Change-Id: I245e3104bb76f7e1fb69a59ab20cc7c8dfcdd460
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Instead of all clients directly RR sourcing the entry they are tracking,
use a deidcated 'tracker' object. This tracker object is a entry
delegate and a child of the entry. The clients are then children of the
tracker.
The benefit of this aproach is that each time a new client tracks the
entry it doesn't RR source it. When an entry is sourced all its children
are updated. Thus, new clients tracking an entry is O(n^2). With the
tracker as indirection, the entry is sourced only once.
Type: feature
Change-Id: I5b80bdda6c02057152e5f721e580e786cd840a3b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
format_vl_api_prefix_t returns a dict with keys 'address' and 'address_length',
but other format_vl_api_prefix functions return a dict with 'prefix', and 'len'.
Refactor all format_vl_api_prefix_t to return consistent keys 'address' and 'len'.
Type: refactor
Change-Id: I5f9558fc2da8742a303266e011102f5b2db80aad
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
please consult the new tunnel proposal at:
https://wiki.fd.io/view/VPP/IPSec
Type: feature
Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Add tooling for feature metadata configuration files.
The main tool is in src/scripts/fts.py
make checkfeaturelist to validate against schema.
make featurelist to dump all feature lists to stdout.
Example feature definition:
name: IP in IP tunnelling
maintainer: Ole Troan <ot@cisco.com>
features:
- IPv4/IPv6 over IPv4/IPv6 encapsulation:
- Fragmentation and Reassembly
- Configurable MTU
- Inner to outer Traffic Class / TOS copy
- Configurable Traffic Class / TOS
- ICMPv4 / ICMPv6 proxying
- 6RD (RFC5969):
- Border Relay
description: "Implements IP{v4,v6} over IP{v4,v6} tunnelling as
described in RFC2473. This module also implement the border relay of
6RD (RFC5969)."
state: production
properties: [API, CLI, STATS, MULTITHREAD]
missing:
- Tunnel PMTUD
- Tracking of FIB state for tunnel state
- IPv6 extension headers (Tunnel encapsulation limit option)
JSON schema is embedded in fts.py
Example markdown: https://github.com/otroan/scratch/blob/master/features.md
Change-Id: I903b4ee6b316a9378c259e86dc937092e5d4b7da
Type: make
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Use explicit types vl_api_address/prefix in ipip.api.
Change-Id: Ib3133cebdbe4437742924efd49cde4009c4cc31b
Type: refactor
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Ida6a8f96bd858246e993250087bed45e7084ede1
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Debug cli short help for 6rd tunnel creation was out-of-date.
Change-Id: I06e4d28481470825bf225ba0fd371a3aebd889fa
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Change-Id: I215e1e0208a073db80ec6f87695d734cf40fabe3
Signed-off-by: Jim Thompson <jim@netgate.com>
|
|
this can be used by e.g. tunnels so it doesn't need to be
implemented for each tunnel type.
Change-Id: I0790f89aa49f83421612b35108cce67693285999
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I9c05225b71b60dc2b419a96daeb71d89757aef98
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
if a tunnel's destination address is reachable through the tunnel
(see example config belwo) then search for and detect a recursion
loop and don't stack the adjacency. Otherwise this results in a
nasty surprise.
DBGvpp# loop cre
DBGvpp# set int state loop0 up
DBGvpp# set int ip addr loop0 10.0.0.1/24
DBGvpp# create gre tunnel src 10.0.0.1 dst 1.1.1.1
DBGvpp# set int state gre0 up
DBGvpp# set int unnum gre0 use loop0
DBGvpp# ip route 1.1.1.1/32 via gre0
DBGvpp# sh ip fib 1.1.1.1
ipv4-VRF:0, fib_index:0, flow hash:[src dst sport dport proto ] locks:[src:plugin-hi:2, src:default-route:1, ]
1.1.1.1/32 fib:0 index:11 locks:4 <<< this is entry #11
src:CLI refs:1 entry-flags:attached, src-flags:added,contributing,active,
path-list:[14] locks:2 flags:shared,looped, uPRF-list:12 len:1 itfs:[2, ]
path:[14] pl-index:14 ip4 weight=1 pref=0 attached-nexthop: oper-flags:recursive-loop,resolved, cfg-flags:attached,
1.1.1.1 gre0 (p2p)
[@0]: ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800
stacked-on entry:11: <<<< and the midchain forwards via entry #11
[@2]: dpo-drop ip4
src:recursive-resolution refs:1 src-flags:added, cover:-1
forwarding: unicast-ip4-chain
[@0]: dpo-load-balance: [proto:ip4 index:13 buckets:1 uRPF:12 to:[0:0]]
[0] [@6]: ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800
stacked-on entry:11:
[@2]: dpo-drop ip4
DBGvpp# sh adj 1
[@1] ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800
stacked-on entry:11:
[@2]: dpo-drop ip4
flags:midchain-ip-stack midchain-looped <<<<< this is a loop
counts:[0:0]
locks:4
delegates:
children:
{path:14}
Change-Id: I39b82bd1ea439be4611c88b130d40289fa0c1b59
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Previously all types are compound. This adds support for aliases,
so one can do things like:
typedef u32 interface_index;
or
typedef u8 ip4_address[4];
Change-Id: I0455cad0123fc88acb491d2a3ea2725426bdb246
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- Error where ICMPv6 error code doesn't reset VLIB_TX = -1
Leading to crash for ICMP generated on tunnelled packets
- Missed setting VNET_BUFFER_F_LOCALLY_ORIGINATED, so
IP in IPv6 packets never got fragmented.
- Add support for fragmentation of buffer chains.
- Remove support for inner fragmentation in frag code itself.
Change-Id: If9a97301b7e35ca97ffa5c0fada2b9e7e7dbfb27
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Ifaef196a24fa9b6924f2b9692318f69763cee5e1
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: Iff557f566ebc9ab170d75da1233997d83b8c8a66
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I9ce801e9b257eaa6be0cbe2ad3bfe630717f8c67
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I63c36644c9d93f2c3ec6606ca0205b407499de4e
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
It is cheaper to get thread index from vlib_main_t if available...
Change-Id: I4582e160d06d9d7fccdc54271912f0635da79b50
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This patch separates setting of hardware interfaec and software
interface MTU. Software MTU is L2 payload MTU (i.e. not including L2
header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set.
Currently only IP4, IP6 are enabled in adjacency / rewrite code.
Documentation in src/vnet/MTU.md
Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Add support for either copying TOS/TC from inner packet to outer,
or set to fixed value.
Change-Id: I716a95f875349acec94317b266c8cf9f2f81a785
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Object sizes must evenly divide alignment requests, or vice
versa. Otherwise, only the first object will be aligned as
requested.
Three choices: add CLIB_CACHE_LINE_ALIGN_MARK(align_me) at
the end of structures, manually pad to an even divisor or multiple of
the alignment request, or use plain vectors/pools.
static assert for enforcement.
Change-Id: I41aa6ff1a58267301d32aaf4b9cd24678ac1c147
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
interface)"
This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa.
Reverting as this patch is causing following crash:
0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails
Aborted
Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I994649761fe2e66e12ae0e49a84fb1d0a966ddfb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I78a4176f98c2b4630a57ac5ddb7faf58ba0c4ee1
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ia2b3350bf8e2c72eee3f33936ba16dd817c75c72
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I166301c9e2388bae5f70ec0179d663a2703e27f5
Signed-off-by: Ole Troan <ot@cisco.com>
|