summaryrefslogtreecommitdiffstats
path: root/src/vnet/ipsec/ipsec.c
AgeCommit message (Collapse)AuthorFilesLines
2023-03-23ipsec: make pre-shared keys harder to misuseBenoît Ganne1-4/+1
Using pre-shared keys is usually a bad idea, one should use eg. IKEv2 instead, but one does not always have the choice. For AES-CBC, the IV must be unpredictable (see NIST SP800-38a Appendix C) whereas for AES-CTR or AES-GCM, the IV should never be reused with the same key material (see NIST SP800-38a Appendix B and NIST SP800-38d section 8). If one uses pre-shared keys and VPP is restarted, the IV counter restarts at 0 and the same IVs are generated with the same pre-shared keys materials. To fix those issues we follow the recommendation from NIST SP800-38a and NIST SP800-38d: - we use a PRNG (not cryptographically secured) to generate IVs to avoid generating the same IV sequence between VPP restarts. The PRNG is chosen so that there is a low chance of generating the same sequence - for AES-CBC, the generated IV is encrypted as part of the message. This makes the (predictable) PRNG-generated IV unpredictable as it is encrypted with the secret key - for AES-CTR and GCM, we use the IV as-is as predictable IVs are fine Most of the changes in this patch are caused by the need to shoehorn an additional state of 2 u64 for the PRNG in the 1st cacheline of the SA object. Type: improvement Change-Id: I2af89c21ae4b2c4c33dd21aeffcfb79c13c9d84c Signed-off-by: Benoît Ganne <bganne@cisco.com>
2022-09-14ipsec: make chacha20-poly1305 available via APIVladimir Ratnikov1-0/+7
Type: feature Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com> Change-Id: I4e03f60f34acd7809ddc5a743650bedbb95b2e98
2022-09-12ipsec: introduce fast path ipv4 inbound matchingPiotr Bronowski1-11/+40
This patch introduces fast path matching for inbound traffic ipv4. Fast path uses bihash tables in order to find matching policy. Adding and removing policies in fast path is much faster than in current implementation. It is still new feature and further work needs and can be done in order to improve perfromance. Type: feature Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com> Change-Id: Ifbd5bfecc21b76ddf8363f5dc089d77595196675
2022-08-19ipsec: enable UDP encap for IPv6 ESP tun protectMatthew Smith1-15/+27
Type: improvement If an SA protecting an IPv6 tunnel interface has UDP encapsulation enabled, the code in esp_encrypt_inline() inserts a UDP header but does not set the next protocol or the UDP payload length, so the peer that receives the packet drops it. Set the next protocol field and the UDP payload length correctly. The port(s) for UDP encapsulation of IPsec was not registered for IPv6. Add this registration for IPv6 SAs when UDP encapsulation is enabled. Add punt handling for IPv6 IKE on NAT-T port. Add registration of linux-cp for the new punt reason. Add unit tests of IPv6 ESP w/ UDP encapsulation on tun protect Signed-off-by: Matthew Smith <mgsmith@netgate.com> Change-Id: Ibb28e423ab8c7bcea2c1964782a788a0f4da5268
2022-07-15ipsec: fast path outbound policy matching implementation for ipv6Piotr Bronowski1-5/+13
With this patch fast path for ipv6 policy lookup is enabled. This impelentation scales and outperforms original implementation when the number of defined flows is higher thatn 100k. Type: feature Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com> Change-Id: I9364b5b8db4fc708790d48c538add272c7cea400
2022-06-29ipsec: add fast path configuration parserPiotr Bronowski1-2/+19
Parser can be configured from the level of startup.conf file: fast path can be enabled and disabled. Type: feature Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com> Change-Id: Ifab83ddcb75bc44c8165e7fa87a1a56d047732a1
2022-06-29ipsec: add/delete ipsec fast path policyPiotr Bronowski1-0/+3
This patch introduces functions to add and delete fast path policies. Type: feature Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com> Change-Id: I3f1f1323148080c9dac531fbe9fa33bad4efe814
2022-05-03ipsec: support per next-header next-nodesBenoît Ganne1-0/+49
Type: feature Change-Id: I940b6c9d206e407f3e17d66c97233cd658984e61 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2022-04-14ipsec: perf improvement of ipsec4_input_node using flow cacheZachary Leaf1-4/+31
Adding flow cache support to improve inbound IPv4/IPSec Security Policy Database (SPD) lookup performance. By enabling the flow cache in startup conf, this replaces a linear O(N) SPD search, with an O(1) hash table search. This patch is the ipsec4_input_node counterpart to https://gerrit.fd.io/r/c/vpp/+/31694, and shares much of the same code, theory and mechanism of action. Details about the flow cache: Mechanism: 1. First packet of a flow will undergo linear search in SPD table. Once a policy match is found, a new entry will be added into the flow cache. From 2nd packet onwards, the policy lookup will happen in flow cache. 2. The flow cache is implemented using a hash table without collision handling. This will avoid the logic to age out or recycle the old flows in flow cache. Whenever a collision occurs, the old entry will be overwritten by the new entry. Worst case is when all the 256 packets in a batch result in collision, falling back to linear search. Average and best case will be O(1). 3. The size of flow cache is fixed and decided based on the number of flows to be supported. The default is set to 1 million flows, but is configurable by a startup.conf option. 4. Whenever a SPD rule is added/deleted by the control plane, all current flow cache entries will be invalidated. As the SPD API is not mp-safe, the data plane will wait for the control plane operation to complete. Cache invalidation is via an epoch counter that is incremented on policy add/del and stored with each entry in the flow cache. If the epoch counter in the flow cache does not match the current count, the entry is considered stale, and we fall back to linear search. The following configurable options are available through startup conf under the ipsec{} entry: 1. ipv4-inbound-spd-flow-cache on/off - enable SPD flow cache (default off) 2. ipv4-inbound-spd-hash-buckets %d - set number of hash buckets (default 4,194,304: ~1 million flows with 25% load factor) Performance with 1 core, 1 ESP Tunnel, null-decrypt then bypass, 94B (null encrypted packet) for different SPD policy matching indices: SPD Policy index : 2 10 100 1000 Throughput : Mbps/Mbps Mbps/Mbps Mbps/Mbps Mbps/Mbps (Baseline/Optimized) ARM TX2 : 300/290 230/290 70/290 8.5/290 Type: improvement Signed-off-by: Zachary Leaf <zachary.leaf@arm.com> Signed-off-by: mgovind <govindarajan.Mohandoss@arm.com> Tested-by: Jieqiang Wang <jieqiang.wang@arm.com> Change-Id: I8be2ad4715accbb335c38cd933904119db75827b
2021-11-19fib: Don't use [midchain] adjacencies to change an interface's feature arcNeale Ranns1-0/+4
Type: fix Using the adjacency to modify the interface's feature arc doesn't work, since there are potentially more than one adj per-interface. Instead have the interface, when it is created, register what the end node of the feature arc is. This end node is then also used as the interface's tx node (i.e. it is used as the adjacency's next-node). rename adj-midhcain-tx as 'tunnel-output', that's a bit more intuitive. There's also a fix in config string handling to: 1- prevent false sharing of strings when the end node of the arc is different. 2- call registered listeners when the end node is changed For IPSec the consequences are that one cannot provide per-adjacency behaviour using different end-nodes - this was previously done for the no-SA and an SA with no protection. These cases are no handled in the esp-encrypt node. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: If3a83d03a3000f28820d9a9cb4101d244803d084
2021-10-12ipsec: Performance improvement of ipsec4_output_node using flow cacheGovindarajan Mohandoss1-1/+31
Adding flow cache support to improve outbound IPv4/IPSec SPD lookup performance. Details about flow cache: Mechanism: 1. First packet of a flow will undergo linear search in SPD table. Once a policy match is found, a new entry will be added into the flow cache. From 2nd packet onwards, the policy lookup will happen in flow cache. 2. The flow cache is implemented using bihash without collision handling. This will avoid the logic to age out or recycle the old flows in flow cache. Whenever a collision occurs, old entry will be overwritten by the new entry. Worst case is when all the 256 packets in a batch result in collision and fall back to linear search. Average and best case will be O(1). 3. The size of flow cache is fixed and decided based on the number of flows to be supported. The default is set to 1 million flows. This can be made as a configurable option as a next step. 4. Whenever a SPD rule is added/deleted by the control plane, the flow cache entries will be completely deleted (reset) in the control plane. The assumption here is that SPD rule add/del is not a frequent operation from control plane. Flow cache reset is done, by putting the data plane in fall back mode, to bypass flow cache and do linear search till the SPD rule add/delete operation is complete. Once the rule is successfully added/deleted, the data plane will be allowed to make use of the flow cache. The flow cache will be reset only after flushing out the inflight packets from all the worker cores using vlib_worker_wait_one_loop(). Details about bihash usage: 1. A new bihash template (16_8) is added to support IPv4 5 tuple. BIHASH_KVP_PER_PAGE and BIHASH_KVP_AT_BUCKET_LEVEL are set to 1 in the new template. It means only one KVP is supported per bucket. 2. Collision handling is avoided by calling BV (clib_bihash_add_or_overwrite_stale) function. Through the stale callback function pointer, the KVP entry will be overwritten during collision. 3. Flow cache reset is done using BV (clib_bihash_foreach_key_value_pair) function. Through the callback function pointer, the KVP value is reset to ~0ULL. MRR performance numbers with 1 core, 1 ESP Tunnel, null-encrypt, 64B for different SPD policy matching indices: SPD Policy index : 1 10 100 1000 Throughput : MPPS/MPPS MPPS/MPPS MPPS/MPPS KPPS/MPPS (Baseline/Optimized) ARM Neoverse N1 : 5.2/4.84 4.55/4.84 2.11/4.84 329.5/4.84 ARM TX2 : 2.81/2.6 2.51/2.6 1.27/2.6 176.62/2.6 INTEL SKX : 4.93/4.48 4.29/4.46 2.05/4.48 336.79/4.47 Next Steps: Following can be made as a configurable option through startup conf at IPSec level: 1. Enable/Disable Flow cache. 2. Bihash configuration like number of buckets and memory size. 3. Dual/Quad loop unroll can be applied around bihash to further improve the performance. 4. The same flow cache logic can be applied for IPv6 as well as in IPSec inbound direction. A deeper and wider flow cache using bihash_40_8 can replace existing bihash_16_8, to make it common for both IPv4 and IPv6 in both outbound and inbound directions. Following changes are made based on the review comments: 1. ON/OFF flow cache through startup conf. Default: OFF 2. Flow cache stale entry detection using epoch counter. 3. Avoid host order endianness conversion during flow cache lookup. 4. Move IPSec startup conf to a common file. 5. Added SPD flow cache unit test case 6. Replaced bihash with vectors to implement flow cache. 7. ipsec_add_del_policy API is not mpsafe. Cleaned up inflight packets check in control plane. Type: improvement Signed-off-by: mgovind <govindarajan.Mohandoss@arm.com> Signed-off-by: Zachary Leaf <zachary.leaf@arm.com> Tested-by: Jieqiang Wang <jieqiang.wang@arm.com> Change-Id: I62b4d6625fbc6caf292427a5d2046aa5672b2006
2021-07-29ipsec: move startup config to common fileZachary Leaf1-0/+51
The ipsec startup.conf config currently exists in ipsec_tun.c. This is because currently the only ipsec{...} options are tunnel related. This patch moves the ipsec config to a common file (ipsec.c) for future extensibility/addition of non-tunnel related config options. Type: refactor Signed-off-by: Zachary Leaf <zachary.leaf@arm.com> Change-Id: I1569dd7948334fd2cc28523ccc6791a22dea8d32
2021-03-05ipsec: Support async mode per-SANeale Ranns1-8/+3
Type: feature This feautre only applies to ESP not AH SAs. As well as the gobal switch for ayncs mode, allow individual SAs to be async. If global async is on, all SAs are async. If global async mode is off, then if then an SA can be individually set to async. This preserves the global switch behaviour. the stratergy in the esp encrypt.decrypt nodes is to separate the frame into, 1) sync buffers, 2) async buffers and 3) no-op buffers. Sync buffer will undergo a cyrpto/ath operation, no-op will not, they are dropped or handed-off. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ifc15b10b870b19413ad030ce7f92ed56275d6791
2021-02-26ipsec: move the IPSec SA pool out of ipsec_mainNeale Ranns1-14/+13
Type: refactor this allows the ipsec_sa_get funtion to be moved from ipsec.h to ipsec_sa.h where it belongs. Also use ipsec_sa_get throughout the code base. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I2dce726c4f7052b5507dd8dcfead0ed5604357df
2021-02-25ipsec: ipsec.h tidy upNeale Ranns1-39/+0
Type: refactor - remove the extern declaration of the nodes. keep the use of them to the files that declare them - remove duplicate declaration of ipsec_set_async_mode - remove unsued ipsec_add_feature Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I6ce7bb4517b508a8f02b11f3bc819e1c5d539c02
2021-02-05ipsec: add support for AES CTRBenoît Ganne1-0/+21
Type: feature Change-Id: I9f7742cb12ce30592b0b022c314b71c81fa7223a Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-01-18ipsec: Support MPLS over IPSec[46] interfaceNeale Ranns1-24/+22
Type: feature Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I89dc3815eabfee135cd5b3c910dea5e2e2ef1333
2020-12-14misc: move to new pool_foreach macrosDamjan Marion1-10/+10
Type: refactor Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-10-21misc: minimize dependencies on udp.hFlorin Coras1-1/+1
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Id13f33843b230a1d169560742c4f7b2dc17d8718
2020-09-07ipsec: fix padding/alignment for native IPsec encryptionChristian Hopps1-9/+9
Not all ESP crypto algorithms require padding/alignment to be the same as AES block/IV size. CCM, CTR and GCM all have no padding/alignment requirements, and the RFCs indicate that no padding (beyond ESPs 4 octet alignment requirement) should be used unless TFC (traffic flow confidentiality) has been requested. CTR: https://tools.ietf.org/html/rfc3686#section-3.2 GCM: https://tools.ietf.org/html/rfc4106#section-3.2 CCM: https://tools.ietf.org/html/rfc4309#section-3.2 - VPP is incorrectly using the IV/AES block size to pad CTR and GCM. These modes do not require padding (beyond ESPs 4 octet requirement), as a result packets will have unnecessary padding, which will waste bandwidth at least and possibly fail certain network configurations that have finely tuned MTU configurations at worst. Fix this as well as changing the field names from ".*block_size" to ".*block_align" to better represent their actual (and only) use. Rename "block_sz" in esp_encrypt to "esp_align" and set it correctly as well. test: ipsec: Add unit-test to test for RFC correct padding/alignment test: patch scapy to not incorrectly pad ccm, ctr, gcm modes as well - Scapy is also incorrectly using the AES block size of 16 to pad CCM, CTR, and GCM cipher modes. A bug report has been opened with the and acknowledged with the upstream scapy project as well: https://github.com/secdev/scapy/issues/2322 Ticket: VPP-1928 Type: fix Signed-off-by: Christian Hopps <chopps@labn.net> Change-Id: Iaa4d6a325a2e99fdcb2c375a3395bcfe7947770e
2020-05-05ipsec: User can choose the UDP source portNeale Ranns1-0/+55
Type: feature thus allowing NAT traversal, Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ie8650ceeb5074f98c68d2d90f6adc2f18afeba08 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-05-04fib: midchain adjacency optimisationsNeale Ranns1-24/+6
Type: improvement - inline some common encap fixup functions into the midchain rewrite node so we don't incur the cost of the virtual function call - change the copy 'guess' from ethernet_header (which will never happen) to an ip4 header - add adj-midchain-tx to multiarch sources - don't run adj-midchain-tx as a feature, instead put this node as the adj's next and at the end of the feature arc. - cache the feature arc config index (to save the cache miss going to fetch it) - don't check if features are enabled when taking the arc (since we know they are) the last two changes will also benefit normal adjacencies taking the arc (i.e. for NAT, ACLs, etc) for IPSec: - don't run esp_encrypt as a feature, instead when required insert this node into the adj's next and into the end of the feature arc. this implies that encrypt is always 'the last feature' run, which is symmetric with decrypt always being the first. - esp_encrpyt for tunnels has adj-midchain-tx as next node Change-Id: Ida0af56a704302cf2d7797ded5f118a781e8acb7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-04-30crypto: introduce async crypto infraFan Zhang1-2/+81
Type: feature Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com> Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com> Signed-off-by: Dariusz Kazimierski <dariuszx.kazimierski@intel.com> Signed-off-by: Piotr Kleski <piotrx.kleski@intel.com> Change-Id: I4c3fcccf55c36842b7b48aed260fef2802b5c54b
2020-02-10ipsec: fix AES-GCM block sizeDamjan Marion1-3/+6
Type: fix Change-Id: I0c9640dab2c0eaba369bc8f3ff7ae56d8e97e170 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-01-22ipsec: re-enable DPDK IPSec for tunnel decap/encap (VPP-1823)Neale Ranns1-0/+14
Type: fix Change-Id: Iff9b1960b122f7d326efc37770b4ae3e81eb3122 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-01-04ipsec: Targeted unit testingNeale Ranns1-4/+10
Type: fix 1 - big packets; chained buffers and those without enoguh space to add ESP header 2 - IPv6 extension headers in packets that are encrypted/decrypted 3 - Interface protection with SAs that have null algorithms Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ie330861fb06a9b248d9dcd5c730e21326ac8e973
2019-12-17ipsec: bind an SA to a workerNeale Ranns1-0/+26
the sequence number increment and the anti-replay window checks must be atomic. Given the vector nature of VPP we can't simply use atomic increments for sequence numbers, since a vector on thread 1 with lower sequence numbers could be 'overtaken' by packets on thread 2 with higher sequence numbers. The anti-replay logic requires a critical section, not just atomics, and we don't want that. So when the SA see the first packet it is bound to that worker all subsequent packets, that arrive on a different worker, are subject to a handoff. Type: feature Change-Id: Ia20a8645fb50622ea6235ab015a537f033d531a4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-08ipsec: remove dedicated IPSec tunnelsNeale Ranns1-8/+0
APIs for dedicated IPSec tunnels will remain in this release and are used to programme the IPIP tunnel protect. APIs will be removed in a future release. see: https://wiki.fd.io/view/VPP/IPSec Type: feature Change-Id: I0f01f597946fdd15dfa5cae3643104d5a9c83089 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-08-27ipsec: Fix NULL encryption algorithmNeale Ranns1-0/+7
Type: fix Ticket: VPP-1756 the block-size was set to 0 resulting in incorrect placement of the ESP footer. add tests for NULL encrypt + integ. Change-Id: I8ab3afda8e68f9ff649540cba3f2cac68f12bbba Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-08-16ipsec: fix missed IPSEC_INTEG_ALG_MD5_96Dmitry Vakhrushev1-0/+5
This algorithm was missed in last improvements. Type:fix Signed-off-by: Dmitry Vakhrushev <dmitry@netgate.com> Change-Id: Ib818cbdcdd1a6f298e8b0086dac4189cc201baa3
2019-07-12ipsec: drop outbound ESP when no crypto alg setMatthew Smith1-1/+1
Type: fix If a tunnel interface has the crypto alg set on the outbound SA to IPSEC_CRYPTO_ALG_NONE and packets are sent out that interface, the attempt to write an ESP trailer on the packet occurs at the wrong offset and the vnet buffer opaque data is corrupted, which can result in a SEGV when a subsequent node attempts to use that data. When an outbound SA is set on a tunnel interface which has no crypto alg set, add a node to the ip{4,6}-output feature arcs which drops all packets leaving that interface instead of adding the node which would try to encrypt the packets. Change-Id: Ie0ac8d8fdc8a035ab8bb83b72b6a94161bebaa48 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-06-25ipsec: return error if the engine backend has no handler for theNeale Ranns1-1/+23
requested alogrithm. Type: feature Change-Id: I19a9c14b2bb52ba2fc66246845b7ada73d5095d1 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-20IPSEC: rename default backendNeale Ranns1-2/+2
Change-Id: I3a4883426b558476040af5b89bb7ccc8f151c5cc Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-14IPSEC coverity fixesNeale Ranns1-1/+1
Change-Id: I753fbce091c0ba1004690be5ddeb04f463cf95a3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-06Add missing init fn dependency to ipsec_initDave Barach1-0/+5
ipsec_init fails if vnet_feature_init hasn't occurred. Can happen if a particular set of plugins are loaded. Change-Id: I67b289d640c28d04e248b9a09ebcc8f205834fd2 Signed-off-by: Dave Barach <dave@barachs.net>
2019-04-25crypto_ipsecmb: use pre-expanded keysDamjan Marion1-1/+1
Change-Id: Ie1d34b7e71554516595e0cd228e2cd54a3b8d629 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-04-25IPSEC; dpdk backend for tunnel interface encryptionNeale Ranns1-17/+49
Change-Id: Ide2a9df18db371c8428855d7f12f246006d7c04c Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-25crypto: improve key handlingDamjan Marion1-0/+13
Change-Id: If96f661d507305da4b96cac7b1a8f14ba90676ad Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-04-16IPSEC: support GCM in ESPNeale Ranns1-7/+18
Change-Id: Id2ddb77b4ec3dd543d6e638bc882923f2bac011d Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-07crypto: add support for AEAD and AES-GCMDamjan Marion1-15/+15
Change-Id: Iff6f81a49b9cff5522fbb4914d47472423eac5db Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-04-04ipsec: trunc_size -> icv_sizeDamjan Marion1-5/+5
Change-Id: Idb661261c2191adda963a7815822fd7a27a9e7a0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-04-03IPSEC: correctly size per-thread dataNeale Ranns1-1/+1
Change-Id: Idfc05cd0e09b50a26eaf747b7c49f720b009159a Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-26ipsec: esp-encrypt reworkDamjan Marion1-0/+2
Change-Id: Ibe7f806b9d600994e83c9f1be526fdb0a1ef1833 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-20ipsec: bug fix ipsec-init sequenceKingwel Xie1-2/+0
ipsec_tunnel_if_init might be called before ipsec_init this memset in ipsec-init therefore zero the memory allocated by ipsec_tunnel_if_init Change-Id: Ie889f1bf624c76842ef77e5a51ed1d41fed4758d Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
2019-03-19crypto: introduce crypto infraDamjan Marion1-21/+50
Change-Id: Ibf320b3e7b054b686f3af9a55afd5d5bda9b1048 Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-03-06ipsec: esp-encrypt and esp-decrypt cleanupDamjan Marion1-4/+0
Change-Id: I1e431aa36a282ca7565c6618a940d591674b8cd2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-05ipsec: cleanup, remove unnecessary code,Kingwel Xie1-2/+3
ipsec_proto_main moved to ipsec.c fix missing '\0' of backend name Change-Id: I90760b3045973a46792c2f098d9b0b1b3d209ad0 Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
2019-02-25IKEv2 to pluginNeale Ranns1-4/+0
for easy integration with ptoducts running their own Ike stack. Without the VPP IKE plugin loaded, the product is free to handle IKE packets as it pleases. Change-Id: Id0839f4d58b797f4c2da0382eb499fc08b05f66f Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-13IPSEC: restack SAs on backend changeNeale Ranns1-0/+12
Change-Id: I5852ca02d684fa9d59e1690efcaca06371c5faff Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-01IPSEC: minor refactorNeale Ranns1-488/+1
No function change. Only breaking the monster ipsec.[hc] into smaller constituent parts Change-Id: I3fd4d2d041673db5865d46a4002f6bd383f378af Signed-off-by: Neale Ranns <nranns@cisco.com>