aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/ipsec/ipsec_api.c
AgeCommit message (Collapse)AuthorFilesLines
2021-11-03ipsec: Support the single IPSec interface dumpNeale Ranns1-0/+5
Type: fix Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I93c819cdd802f0980a981d1fc5561d65b35d3382
2021-06-29ipsec: Fix setting the hi-sequence number for decryptNeale Ranns1-6/+6
Type: fix two problems; 1 - just because anti-reply is not enabled doesn't mean the high sequence number should not be used. - fix, there needs to be some means to detect a wrapped packet, so we use a window size of 2^30. 2 - The SA object was used as a scratch pad for the high-sequence number used during decryption. That means that once the batch has been processed the high-sequence number used is lost. This means it is not possible to distinguish this case: if (seq < IPSEC_SA_ANTI_REPLAY_WINDOW_LOWER_BOUND (tl)) { ... if (post_decrypt) { if (hi_seq_used == sa->seq_hi) /* the high sequence number used to succesfully decrypt this * packet is the same as the last-sequnence number of the SA. * that means this packet did not cause a wrap. * this packet is thus out of window and should be dropped */ return 1; else /* The packet decrypted with a different high sequence number * to the SA, that means it is the wrap packet and should be * accepted */ return 0; } - fix: don't use the SA as a scratch pad, use the 'packet_data' - the same place that is used as the scratch pad for the low sequence number. other consequences: - An SA doesn't have seq and last_seq, it has only seq; the sequence numnber of the last packet tx'd or rx'd. - there's 64bits of space available on the SA's first cache line. move the AES CTR mode IV there. - test the ESN/AR combinations to catch the bugs this fixes. This doubles the amount of tests, but without AR on they only run for 2 seconds. In the AR tests, the time taken to wait for packets that won't arrive is dropped from 1 to 0.2 seconds thus reducing the runtime of these tests from 10-15 to about 5 sceonds. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Iaac78905289a272dc01930d70decd8109cf5e7a5
2021-06-28ipsec: Split the SA add_del API into an separate add and delNeale Ranns1-35/+79
Type: improvement the rationale being that the del only requires the SA's ID, so it's a bit mean to require the client to fill out all the other information as well. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ibbc20405e74d6a0e1a3797465ead5271f15888e4
2021-06-22ipsec: api cleanupFilip Tehlar1-81/+18
Use autogenerated code. Does not change API definitions. Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I0db7343e907524af5adb2f4771b45712927d5833
2021-06-14linux-cp: Add tests for tun devicesNeale Ranns1-0/+31
Type: test Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Iec69d8624b15766ed65e7d09777819d2242dee17
2021-04-20ipsec: remove WITH_LIBSSL macrosDamjan Marion1-88/+3
We don't use libssl anymore... At least not directly. Type: improvement Change-Id: I9a0fab6e3c576d945498ce46f030bd26c1a14d15 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-03-05ipsec: Support async mode per-SANeale Ranns1-1/+0
Type: feature This feautre only applies to ESP not AH SAs. As well as the gobal switch for ayncs mode, allow individual SAs to be async. If global async is on, all SAs are async. If global async mode is off, then if then an SA can be individually set to async. This preserves the global switch behaviour. the stratergy in the esp encrypt.decrypt nodes is to separate the frame into, 1) sync buffers, 2) async buffers and 3) no-op buffers. Sync buffer will undergo a cyrpto/ath operation, no-op will not, they are dropped or handed-off. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ifc15b10b870b19413ad030ce7f92ed56275d6791
2021-02-26ipsec: move the IPSec SA pool out of ipsec_mainNeale Ranns1-9/+6
Type: refactor this allows the ipsec_sa_get funtion to be moved from ipsec.h to ipsec_sa.h where it belongs. Also use ipsec_sa_get throughout the code base. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I2dce726c4f7052b5507dd8dcfead0ed5604357df
2021-02-10ipsec: Use the new tunnel API types to add flow label and TTL copyNeale Ranns1-61/+211
support Type: feature attmpet 2. this includes changes in ah_encrypt that don't use uninitialised memory when doing tunnel mode fixups. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ie3cb776f5c415c93b8a5ee22f22586fd0181110d
2021-02-09Revert "ipsec: Use the new tunnel API types to add flow label and TTL copy"Matthew Smith1-211/+61
This reverts commit c7eaa711f3e25580687df0618e9ca80d3dc85e5f. Reason for revert: The jenkins job named 'vpp-merge-master-ubuntu1804-x86_64' had 2 IPv6 AH tests fail after the change was merged. Those 2 tests also failed the next time that job ran after an unrelated change was merged. Change-Id: I0e2c3ee895114029066c82624e79807af575b6c0 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2021-02-08ipsec: Use the new tunnel API types to add flow label and TTL copyNeale Ranns1-61/+211
support Type: feature Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I6d4a9b187daa725d4b2cbb66e11616802d44d2d3
2021-01-21ipsec: Honour IPSec SA table-ID over APINeale Ranns1-9/+5
Type: fix Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ib08fe356e4dc710dd60a96736c48b27129f06786
2021-01-07ipsec: Deprecated the old IPsec Tunnel interfaceNeale Ranns1-190/+0
Type: fix it's been 2 releases since it was marked deprecated. Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I0eba7ed607826ed0d00e7d2d8f9b27d09e8e9a6e
2020-12-14misc: move to new pool_foreach macrosDamjan Marion1-6/+6
Type: refactor Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-11-02ipsec: Tunnel SA DSCP behaviourNeale Ranns1-3/+185
Type: feature - use tunnel_encap_decap_flags to control the copying of DSCP/ECN/etc during IPSEC tunnel mode encap. - use DSCP value to have fixed encap value. Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: If4f51fd4c1dcbb0422aac9bd078e5c14af5bf11f
2020-09-02ipsec: add ipsec set async mode apiYulong Pei1-1/+14
Type: improvement Signed-off-by: Yulong Pei <yulong.pei@intel.com> Change-Id: I841f4407ed8c1a448e5102059fc79ae1f7d461de
2020-07-21ipsec: Dedicated IPSec interface typeNeale Ranns1-0/+42
Type: feature Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ie8bd50df163aea2798e9f9d35a13dcadc4a4a4b2
2020-05-27ipsec: Add/Del IPSec SA is not MP safeNeale Ranns1-7/+0
Type: fix we can probably do better, but for now this is needed Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I07161f5ac07a70a0e6db6608ba31659d9bc2c9ed
2020-05-05ipsec: User can choose the UDP source portNeale Ranns1-3/+9
Type: feature thus allowing NAT traversal, Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ie8650ceeb5074f98c68d2d90f6adc2f18afeba08 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-04-02ipsec: provide stat index in sa detailsMatthew Smith1-0/+2
Type: improvement When IPsec SAs are dumped, include the index that can be used to find byte & packet counters for the SA in the stat segment. Removed the field total_data_size from the details since it was not being populated and put the stat index field in its place. Change-Id: If73efc230542a11944551b6e710b57b575450da3 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-03-31ipsec: use id in ipsec_tunnel_protect_detailsMatthew Smith1-4/+6
Type: fix The data populated into an ipsec_tunnel_protect_details message includes an outbound SA and a list of inbound SAs for a tunnel interface. These are populated with SA indices. The values used by an API client to refer to an SA in other messages is the SA id rather than the index. Use the SA id instead of the index. Change-Id: Ifaad32801092a7f87bd0dcf19de418d36613f8dd Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-03-21ikev2: add support for custom ipsec-over-udp portFilip Tehlar1-3/+5
Type: feature Change-Id: Ifee2b3dca85ea915067b9285e3636802bf0c19a8 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-02-21ipsec: IPSec protection for multi-point tunnel interfacesNeale Ranns1-14/+15
Type: feature Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Iaba2ab11bfaa1c8db4023434e3043ac39500f938
2020-01-27ipip: Multi-point interfaceNeale Ranns1-1/+1
Type: feature plus fixes for gre Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I0eca5f94b8b8ea0fcfb058162cafea4491708db6
2020-01-27tunnel: Common types for IP tunnelsNeale Ranns1-1/+2
Type: refactor Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I18dcdb7af3e327f6cacdbcb1e52b89f13d6ba6e2
2019-12-10api: multiple connections per processDave Barach1-1/+1
Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I2272521d6e69edcd385ef684af6dd4eea5eaa953
2019-12-03ipip: Tunnel flags controlling copying data to/from payload/encapNeale Ranns1-1/+2
Type: feature Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I9467f11775936754406892b8e9e275f989ac9b30
2019-12-03ipsec: Changes to make ipsec encoder/decoders reusable by the pluginsPrashant Maheshwari1-147/+1
Type: fix Signed-off-by: Prashant Maheshwari <pmahesh2@cisco.com> Change-Id: I81b937fc8cfec36f8fb5de711ffbb02f23f3664e Signed-off-by: Prashant Maheshwari <pmahesh2@cisco.com>
2019-11-20ipsec: Honour the renumber argument when selecting show instnaceNeale Ranns1-1/+1
Type: fix Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: If41f154c354772f5b32cfd35ea231b8f59c2c0c5
2019-11-18ipsec: Coverity warningsNeale Ranns1-3/+10
Type: fix Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I6bb6c6be62f98ac9a059469c81a5f4476b96e96e
2019-11-08ipsec: remove dedicated IPSec tunnelsNeale Ranns1-84/+204
APIs for dedicated IPSec tunnels will remain in this release and are used to programme the IPIP tunnel protect. APIs will be removed in a future release. see: https://wiki.fd.io/view/VPP/IPSec Type: feature Change-Id: I0f01f597946fdd15dfa5cae3643104d5a9c83089 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-12ipsec: Reference count the SAsNeale Ranns1-5/+6
- this remove the need to iterate through all state when deleting an SA - and ensures that if the SA is deleted by the client is remains for use in any state until that state is also removed. Type: feature Change-Id: I438cb67588cb65c701e49a7a9518f88641925419 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-11ipsec: Revert "IPSEC: remove byte swap operations in DP during SPD classify"Neale Ranns1-9/+8
Type: fix Fixes: 231c4696872cb344f28648949603840136c0795d This reverts commit 231c4696872cb344f28648949603840136c0795d. Change-Id: I136344555983dd10a31dbc000ee40e2de2c91291 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-18ipsec: ipsec-tun protectNeale Ranns1-1/+138
please consult the new tunnel proposal at: https://wiki.fd.io/view/VPP/IPSec Type: feature Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-07ipsec: remove the set_key APINeale Ranns1-81/+0
there's no use case to just change the key of an SA. instead the SA should be renegociated and the new SA applied to the existing SPD entry or tunnel. the set_key functions were untested. Type: refactor Change-Id: Ib096eebaafb20be7b5501ece5a24aea038373002 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-25IPSEC; dpdk backend for tunnel interface encryptionNeale Ranns1-13/+3
Change-Id: Ide2a9df18db371c8428855d7f12f246006d7c04c Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-17IPSEC: Pass the algorithm salt (used in GCM) over the APINeale Ranns1-2/+2
Change-Id: Ia8cea13f7b937294e6a080a55fb2ceff30063acf Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-16IPSEC: support GCM in ESPNeale Ranns1-1/+1
Change-Id: Id2ddb77b4ec3dd543d6e638bc882923f2bac011d Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-29IPSEC-GRE: fixes and API update to common types.Neale Ranns1-5/+12
Change-Id: Icdcbac7453baa837a9c0c4a2401dff4a6aa6cba0 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-28ipsec: USE_EXTENDED_SEQ_NUM -> USE_ESNDamjan Marion1-3/+3
Change-Id: Ib828ea5106f3ae280e4ce233f2462dee363580b7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-27ipsec: compress ipsec_sa_t so data used by dataplane code fits in cachelineDamjan Marion1-8/+8
Change-Id: I81ecdf9fdcfcb017117b47dc031f93208e004d7c Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-26IPSEC: more expressive API errorsNeale Ranns1-5/+5
Change-Id: I517a7bdae03abfea58451819e7854974397d77f8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-21ipsec: add ipv6 support for ipsec tunnel interfaceKingwel Xie1-2/+4
Change-Id: I6a76907dc7bed2a81282b63669bea2219d6903c9 Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com> Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2019-03-19IPSEC: remove byte swap operations in DP during SPD classifyNeale Ranns1-8/+9
Change-Id: I4bfde738f9585b045cb5ba62cf51b141d639b1b2 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-19IPSEC: tidy the policy typesNeale Ranns1-3/+8
Change-Id: I5e981f12ff44243623cfd18d5e0ae06a7dfd1eb8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-13VPP-1576: fix a set of coverity warningsDave Barach1-1/+1
Change-Id: Ifd34aed8692d5acaa370d4976d974ac573e43705 Signed-off-by: Dave Barach <dave@barachs.net>
2019-02-25IKEv2 to pluginNeale Ranns1-337/+19
for easy integration with ptoducts running their own Ike stack. Without the VPP IKE plugin loaded, the product is free to handle IKE packets as it pleases. Change-Id: Id0839f4d58b797f4c2da0382eb499fc08b05f66f Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-20IPSEC: API coverity error of unitialised stat_index valueNeale Ranns1-0/+2
Change-Id: If884a3840f34090e33ce7808d38e50f919290d9f Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-18IPSEC: move SA counters into the stats segmentNeale Ranns1-4/+8
1) stats are accessed via the stat segment which is more condusive to monitoring 2) stats are accurate in the presence of multiple threads. There's no guarantee that an SA is access from only one worker. Change-Id: Id5e217ea253ddfc9480aaedb0d008dea031b1148 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-07IPSEC: no second lookup after tunnel encapNeale Ranns1-86/+138
in the same maaner as with other tunnel tyeps we use the FIB to cache and track the destination used to reach the tunnel endpoint. Post encap we can then ship the packet straight to this adjacency and thus elide the costly second lookup. - SA add and del function so they can be used both directly from the API and for tunnels. - API change for the SA dump to use the SA type - ipsec_key_t type for convenience (copying, [un]formating) - no matching tunnel counters in ipsec-if-input Change-Id: I9d144a59667f7bf96442f4ca66bef5c1d3c7f1ea Signed-off-by: Neale Ranns <nranns@cisco.com>