summaryrefslogtreecommitdiffstats
path: root/src/vnet/ipsec/ipsec_sa.c
AgeCommit message (Collapse)AuthorFilesLines
2020-10-21misc: minimize dependencies on udp.hFlorin Coras1-1/+1
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Id13f33843b230a1d169560742c4f7b2dc17d8718
2020-09-07ipsec: fix padding/alignment for native IPsec encryptionChristian Hopps1-2/+2
Not all ESP crypto algorithms require padding/alignment to be the same as AES block/IV size. CCM, CTR and GCM all have no padding/alignment requirements, and the RFCs indicate that no padding (beyond ESPs 4 octet alignment requirement) should be used unless TFC (traffic flow confidentiality) has been requested. CTR: https://tools.ietf.org/html/rfc3686#section-3.2 GCM: https://tools.ietf.org/html/rfc4106#section-3.2 CCM: https://tools.ietf.org/html/rfc4309#section-3.2 - VPP is incorrectly using the IV/AES block size to pad CTR and GCM. These modes do not require padding (beyond ESPs 4 octet requirement), as a result packets will have unnecessary padding, which will waste bandwidth at least and possibly fail certain network configurations that have finely tuned MTU configurations at worst. Fix this as well as changing the field names from ".*block_size" to ".*block_align" to better represent their actual (and only) use. Rename "block_sz" in esp_encrypt to "esp_align" and set it correctly as well. test: ipsec: Add unit-test to test for RFC correct padding/alignment test: patch scapy to not incorrectly pad ccm, ctr, gcm modes as well - Scapy is also incorrectly using the AES block size of 16 to pad CCM, CTR, and GCM cipher modes. A bug report has been opened with the and acknowledged with the upstream scapy project as well: https://github.com/secdev/scapy/issues/2322 Ticket: VPP-1928 Type: fix Signed-off-by: Christian Hopps <chopps@labn.net> Change-Id: Iaa4d6a325a2e99fdcb2c375a3395bcfe7947770e
2020-05-05ipsec: User can choose the UDP source portNeale Ranns1-9/+14
Type: feature thus allowing NAT traversal, Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ie8650ceeb5074f98c68d2d90f6adc2f18afeba08 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-04-30crypto: introduce async crypto infraFan Zhang1-3/+61
Type: feature Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com> Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com> Signed-off-by: Dariusz Kazimierski <dariuszx.kazimierski@intel.com> Signed-off-by: Piotr Kleski <piotrx.kleski@intel.com> Change-Id: I4c3fcccf55c36842b7b48aed260fef2802b5c54b
2020-03-21ikev2: add support for custom ipsec-over-udp portFilip Tehlar1-3/+12
Type: feature Change-Id: Ifee2b3dca85ea915067b9285e3636802bf0c19a8 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-12-17ipsec: bind an SA to a workerNeale Ranns1-0/+2
the sequence number increment and the anti-replay window checks must be atomic. Given the vector nature of VPP we can't simply use atomic increments for sequence numbers, since a vector on thread 1 with lower sequence numbers could be 'overtaken' by packets on thread 2 with higher sequence numbers. The anti-replay logic requires a critical section, not just atomics, and we don't want that. So when the SA see the first packet it is bound to that worker all subsequent packets, that arrive on a different worker, are subject to a handoff. Type: feature Change-Id: Ia20a8645fb50622ea6235ab015a537f033d531a4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-08ipsec: remove dedicated IPSec tunnelsNeale Ranns1-0/+14
APIs for dedicated IPSec tunnels will remain in this release and are used to programme the IPIP tunnel protect. APIs will be removed in a future release. see: https://wiki.fd.io/view/VPP/IPSec Type: feature Change-Id: I0f01f597946fdd15dfa5cae3643104d5a9c83089 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-10-22ikev2: fix GCM cipherFilip Tehlar1-9/+17
Type: fix Change-Id: I382499061ff4b1c2cc1b70ebbf9725ff0e1be325 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-07-19fib: FIB Entry trackingNeale Ranns1-10/+6
Instead of all clients directly RR sourcing the entry they are tracking, use a deidcated 'tracker' object. This tracker object is a entry delegate and a child of the entry. The clients are then children of the tracker. The benefit of this aproach is that each time a new client tracks the entry it doesn't RR source it. When an entry is sourced all its children are updated. Thus, new clients tracking an entry is O(n^2). With the tracker as indirection, the entry is sourced only once. Type: feature Change-Id: I5b80bdda6c02057152e5f721e580e786cd840a3b Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-12ipsec: Reference count the SAsNeale Ranns1-83/+65
- this remove the need to iterate through all state when deleting an SA - and ensures that if the SA is deleted by the client is remains for use in any state until that state is also removed. Type: feature Change-Id: I438cb67588cb65c701e49a7a9518f88641925419 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-18ipsec: ipsec-tun protectNeale Ranns1-2/+23
please consult the new tunnel proposal at: https://wiki.fd.io/view/VPP/IPSec Type: feature Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-17ipsec: One DPO per SANeale Ranns1-10/+9
An SA can be used only for ESP or AH nver both, so it needs only one coresponding DPO. Type: refactor Change-Id: I689060f795ee352245a0eaed0890a6b234c63d71 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-07ipsec: remove the set_key APINeale Ranns1-46/+0
there's no use case to just change the key of an SA. instead the SA should be renegociated and the new SA applied to the existing SPD entry or tunnel. the set_key functions were untested. Type: refactor Change-Id: Ib096eebaafb20be7b5501ece5a24aea038373002 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-05IPSEC: some CLI fixesNeale Ranns1-2/+8
Change-Id: I45618347e37440263270baf07b2f82f653f754a5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-02IPSec: memcpy of integ key borkNeale Ranns1-1/+1
Change-Id: Icd76769d841792eb2d59ffc23c557dcca9ddc580 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-30crypto: enforce per-alg crypto key lengthBenoît Ganne1-0/+5
Crypto algorithms have different requirements on key length. As we do not support key stretching (eg. PBKDF2), user must provide the exact key length used by the algorithm. Failing that means low-level crypto functions might read garbage (eg. aes128_key_expand() will read 16-bytes, regardless of the key provided by the user). Change-Id: I347a1ea7a59720a1ed07ceaad8b00a31f78458c9 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-04-25IPSEC; dpdk backend for tunnel interface encryptionNeale Ranns1-1/+1
Change-Id: Ide2a9df18db371c8428855d7f12f246006d7c04c Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-25crypto: improve key handlingDamjan Marion1-0/+18
Change-Id: If96f661d507305da4b96cac7b1a8f14ba90676ad Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-04-16IPSEC: support GCM in ESPNeale Ranns1-2/+9
Change-Id: Id2ddb77b4ec3dd543d6e638bc882923f2bac011d Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-10IPSEC: for each engine and algorithm testsNeale Ranns1-1/+1
refactor the IPSEC tests a bit so we can parameterise the setup. Change-Id: I777e5eb8f29ca1dce3dd273ebd05dae5846790af Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-07crypto: add support for AEAD and AES-GCMDamjan Marion1-3/+3
Change-Id: Iff6f81a49b9cff5522fbb4914d47472423eac5db Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-04-04ipsec: trunc_size -> icv_sizeDamjan Marion1-2/+2
Change-Id: Idb661261c2191adda963a7815822fd7a27a9e7a0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-04-02IPSEC: tunnel scaling - don't stack the inbould SANeale Ranns1-13/+3
Change-Id: I0b47590400aebea09aa1b27de753be638e1ba870 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-29ipsec: esp-decrypt reworkDamjan Marion1-0/+1
Change-Id: Icf83c876d0880d1872b84e0a3d34be654b76149f Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-28ipsec: USE_EXTENDED_SEQ_NUM -> USE_ESNDamjan Marion1-2/+2
Change-Id: Ib828ea5106f3ae280e4ce233f2462dee363580b7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-27ipsec: compress ipsec_sa_t so data used by dataplane code fits in cachelineDamjan Marion1-19/+21
Change-Id: I81ecdf9fdcfcb017117b47dc031f93208e004d7c Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-26ipsec: esp-encrypt reworkDamjan Marion1-0/+43
Change-Id: Ibe7f806b9d600994e83c9f1be526fdb0a1ef1833 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-20ipsec: keep crypto data inside SADamjan Marion1-2/+22
Change-Id: Ie8986bd3652d25c4befe681cea77df95aba37ebc Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-02-18IPSEC: move SA counters into the stats segmentNeale Ranns1-0/+14
1) stats are accessed via the stat segment which is more condusive to monitoring 2) stats are accurate in the presence of multiple threads. There's no guarantee that an SA is access from only one worker. Change-Id: Id5e217ea253ddfc9480aaedb0d008dea031b1148 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-14ipsec: memory leak fixupKingwel Xie1-1/+4
Change-Id: Ib2ad196bec1005d6678589d5b5c199b8a541c720 Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
2019-02-13IPSEC: restack SAs on backend changeNeale Ranns1-13/+26
Change-Id: I5852ca02d684fa9d59e1690efcaca06371c5faff Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-07IPSEC: no second lookup after tunnel encapNeale Ranns1-38/+236
in the same maaner as with other tunnel tyeps we use the FIB to cache and track the destination used to reach the tunnel endpoint. Post encap we can then ship the packet straight to this adjacency and thus elide the costly second lookup. - SA add and del function so they can be used both directly from the API and for tunnels. - API change for the SA dump to use the SA type - ipsec_key_t type for convenience (copying, [un]formating) - no matching tunnel counters in ipsec-if-input Change-Id: I9d144a59667f7bf96442f4ca66bef5c1d3c7f1ea Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-05IPSEC: SPD counters in the stats sgementNeale Ranns1-10/+7
- return the stats_index of each SPD in the create API call - no ip_any in the API as this creates 2 SPD entries. client must add both v4 and v6 explicitly - only one pool of SPD entries (rhter than one per-SPD) to support this - no packets/bytes in the dump API. Polling the stats segment is much more efficient (if the SA lifetime is based on packet/bytes) - emit the policy index in the packet trace and CLI commands. Change-Id: I7eaf52c9d0495fa24450facf55229941279b8569 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-01IPSEC: minor refactorNeale Ranns1-0/+174
No function change. Only breaking the monster ipsec.[hc] into smaller constituent parts Change-Id: I3fd4d2d041673db5865d46a4002f6bd383f378af Signed-off-by: Neale Ranns <nranns@cisco.com>