aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/ipsec/ipsec_sa.h
AgeCommit message (Collapse)AuthorFilesLines
2021-02-08ipsec: Use the new tunnel API types to add flow label and TTL copyNeale Ranns1-23/+8
support Type: feature Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I6d4a9b187daa725d4b2cbb66e11616802d44d2d3
2021-02-05ipsec: add support for AES CTRBenoît Ganne1-16/+25
Type: feature Change-Id: I9f7742cb12ce30592b0b022c314b71c81fa7223a Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-02-04ipsec: one thread index per-SANeale Ranns1-2/+2
Type: improvement AN SA is uni-drectional therefore it can be used only for encrypt or decrypt, not both. So it only needs one thread ID. free up some space on the 1st cacheline. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I21cb7cff70a763cbe2bffead860b574bc80b3136
2020-11-02ipsec: Tunnel SA DSCP behaviourNeale Ranns1-1/+6
Type: feature - use tunnel_encap_decap_flags to control the copying of DSCP/ECN/etc during IPSEC tunnel mode encap. - use DSCP value to have fixed encap value. Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: If4f51fd4c1dcbb0422aac9bd078e5c14af5bf11f
2020-10-19ipsec: Layout and prefetching of SA structNeale Ranns1-26/+34
Type: improvement - collect all DP used variables onto 1st or 2nd cache line - prefetch the 2nd cache line - in encrypt prefetch the likely location of the trailer. Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I44d58f8d2d469ff71a4f4a71578e7cc1acaeba43
2020-09-07ipsec: fix padding/alignment for native IPsec encryptionChristian Hopps1-1/+1
Not all ESP crypto algorithms require padding/alignment to be the same as AES block/IV size. CCM, CTR and GCM all have no padding/alignment requirements, and the RFCs indicate that no padding (beyond ESPs 4 octet alignment requirement) should be used unless TFC (traffic flow confidentiality) has been requested. CTR: https://tools.ietf.org/html/rfc3686#section-3.2 GCM: https://tools.ietf.org/html/rfc4106#section-3.2 CCM: https://tools.ietf.org/html/rfc4309#section-3.2 - VPP is incorrectly using the IV/AES block size to pad CTR and GCM. These modes do not require padding (beyond ESPs 4 octet requirement), as a result packets will have unnecessary padding, which will waste bandwidth at least and possibly fail certain network configurations that have finely tuned MTU configurations at worst. Fix this as well as changing the field names from ".*block_size" to ".*block_align" to better represent their actual (and only) use. Rename "block_sz" in esp_encrypt to "esp_align" and set it correctly as well. test: ipsec: Add unit-test to test for RFC correct padding/alignment test: patch scapy to not incorrectly pad ccm, ctr, gcm modes as well - Scapy is also incorrectly using the AES block size of 16 to pad CCM, CTR, and GCM cipher modes. A bug report has been opened with the and acknowledged with the upstream scapy project as well: https://github.com/secdev/scapy/issues/2322 Ticket: VPP-1928 Type: fix Signed-off-by: Christian Hopps <chopps@labn.net> Change-Id: Iaa4d6a325a2e99fdcb2c375a3395bcfe7947770e
2020-05-05ipsec: User can choose the UDP source portNeale Ranns1-1/+1
Type: feature thus allowing NAT traversal, Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ie8650ceeb5074f98c68d2d90f6adc2f18afeba08 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-04-30crypto: introduce async crypto infraFan Zhang1-3/+43
Type: feature Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com> Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com> Signed-off-by: Dariusz Kazimierski <dariuszx.kazimierski@intel.com> Signed-off-by: Piotr Kleski <piotrx.kleski@intel.com> Change-Id: I4c3fcccf55c36842b7b48aed260fef2802b5c54b
2020-03-21ikev2: add support for custom ipsec-over-udp portFilip Tehlar1-1/+4
Type: feature Change-Id: Ifee2b3dca85ea915067b9285e3636802bf0c19a8 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-12-17ipsec: bind an SA to a workerNeale Ranns1-0/+14
the sequence number increment and the anti-replay window checks must be atomic. Given the vector nature of VPP we can't simply use atomic increments for sequence numbers, since a vector on thread 1 with lower sequence numbers could be 'overtaken' by packets on thread 2 with higher sequence numbers. The anti-replay logic requires a critical section, not just atomics, and we don't want that. So when the SA see the first packet it is bound to that worker all subsequent packets, that arrive on a different worker, are subject to a handoff. Type: feature Change-Id: Ia20a8645fb50622ea6235ab015a537f033d531a4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-08ipsec: remove dedicated IPSec tunnelsNeale Ranns1-0/+1
APIs for dedicated IPSec tunnels will remain in this release and are used to programme the IPIP tunnel protect. APIs will be removed in a future release. see: https://wiki.fd.io/view/VPP/IPSec Type: feature Change-Id: I0f01f597946fdd15dfa5cae3643104d5a9c83089 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-31ipsec: Typo in flag nameNeale Ranns1-1/+1
Type: fix Change-Id: I0c9353598d3c9b7ea587ea8a2b6e1faa5454843d Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-24ipsec: GCM, Anti-replay and ESN fixessNeale Ranns1-26/+103
Type: fix Several Fixes: 1 - Anti-replay did not work with GCM becuase it overwrote the sequence number in the ESP header. To fix i added the seq num to the per-packet data so it is preserved 2 - The high sequence number was not byte swapped during ESP encrypt. 3 - openssl engine was the only one to return FAIL_DECRYPT for bad GCM the others return BAD_HMAC. removed the former 4 - improved tracing to show the low and high seq numbers 5 - documented the anti-replay window checks 6 - fixed scapy patch for ESN support for GCM 7 - tests for anti-reply (w/ and w/o ESN) for each crypto algo Change-Id: Id65d96b6d1d4dd821b2ab557e87468fff6d70e5b Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-12ipsec: Reference count the SAsNeale Ranns1-18/+16
- this remove the need to iterate through all state when deleting an SA - and ensures that if the SA is deleted by the client is remains for use in any state until that state is also removed. Type: feature Change-Id: I438cb67588cb65c701e49a7a9518f88641925419 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-18ipsec: ipsec-tun protectNeale Ranns1-1/+9
please consult the new tunnel proposal at: https://wiki.fd.io/view/VPP/IPSec Type: feature Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-17ipsec: One DPO per SANeale Ranns1-4/+1
An SA can be used only for ESP or AH nver both, so it needs only one coresponding DPO. Type: refactor Change-Id: I689060f795ee352245a0eaed0890a6b234c63d71 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-07ipsec: remove the set_key APINeale Ranns1-2/+0
there's no use case to just change the key of an SA. instead the SA should be renegociated and the new SA applied to the existing SPD entry or tunnel. the set_key functions were untested. Type: refactor Change-Id: Ib096eebaafb20be7b5501ece5a24aea038373002 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-14IPSEC: remove unecessary pass by reference of sequence numberNeale Ranns1-2/+2
Change-Id: Id406eb8c69a89c57305d8f138e8e6730037aa799 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-26crypto, ipsec: change GCM IV handlingDamjan Marion1-0/+1
- nonce construction out of salt and iv is ipsec specific so it should be handled in ipsec code - fixes GCM unit tests - GCM IV is constructed out of simple counter, per RFC4106 section 3.1 Change-Id: Ib7712cc9612830daa737f5171d8384f1d361bb61 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-04-25IPSEC; dpdk backend for tunnel interface encryptionNeale Ranns1-1/+0
Change-Id: Ide2a9df18db371c8428855d7f12f246006d7c04c Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-25crypto: improve key handlingDamjan Marion1-3/+7
Change-Id: If96f661d507305da4b96cac7b1a8f14ba90676ad Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-04-17IPSEC: Pass the algorithm salt (used in GCM) over the APINeale Ranns1-2/+2
Change-Id: Ia8cea13f7b937294e6a080a55fb2ceff30063acf Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-16IPSEC: support GCM in ESPNeale Ranns1-0/+7
Change-Id: Id2ddb77b4ec3dd543d6e638bc882923f2bac011d Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-07crypto: add support for AEAD and AES-GCMDamjan Marion1-3/+3
Change-Id: Iff6f81a49b9cff5522fbb4914d47472423eac5db Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-04-04ipsec: trunc_size -> icv_sizeDamjan Marion1-1/+1
Change-Id: Idb661261c2191adda963a7815822fd7a27a9e7a0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-04-02IPSEC: tunnel scaling - don't stack the inbould SANeale Ranns1-0/+1
Change-Id: I0b47590400aebea09aa1b27de753be638e1ba870 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-29IPSEC-GRE: fixes and API update to common types.Neale Ranns1-0/+1
Change-Id: Icdcbac7453baa837a9c0c4a2401dff4a6aa6cba0 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-28ipsec: USE_EXTENDED_SEQ_NUM -> USE_ESNDamjan Marion1-3/+3
Change-Id: Ib828ea5106f3ae280e4ce233f2462dee363580b7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-28ipsec: anti-replay code cleanupDamjan Marion1-1/+129
Change-Id: Ib73352d6be26d639a7f9d47ca0570a1248bff04a Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-27ipsec: compress ipsec_sa_t so data used by dataplane code fits in cachelineDamjan Marion1-23/+51
Change-Id: I81ecdf9fdcfcb017117b47dc031f93208e004d7c Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-26ipsec: esp-encrypt reworkDamjan Marion1-0/+3
Change-Id: Ibe7f806b9d600994e83c9f1be526fdb0a1ef1833 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-03-20ipsec: keep crypto data inside SADamjan Marion1-0/+10
Change-Id: Ie8986bd3652d25c4befe681cea77df95aba37ebc Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-02-18IPSEC: move SA counters into the stats segmentNeale Ranns1-3/+7
1) stats are accessed via the stat segment which is more condusive to monitoring 2) stats are accurate in the presence of multiple threads. There's no guarantee that an SA is access from only one worker. Change-Id: Id5e217ea253ddfc9480aaedb0d008dea031b1148 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-13IPSEC: restack SAs on backend changeNeale Ranns1-0/+4
Change-Id: I5852ca02d684fa9d59e1690efcaca06371c5faff Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-07IPSEC: no second lookup after tunnel encapNeale Ranns1-7/+61
in the same maaner as with other tunnel tyeps we use the FIB to cache and track the destination used to reach the tunnel endpoint. Post encap we can then ship the packet straight to this adjacency and thus elide the costly second lookup. - SA add and del function so they can be used both directly from the API and for tunnels. - API change for the SA dump to use the SA type - ipsec_key_t type for convenience (copying, [un]formating) - no matching tunnel counters in ipsec-if-input Change-Id: I9d144a59667f7bf96442f4ca66bef5c1d3c7f1ea Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-01IPSEC: minor refactorNeale Ranns1-0/+124
No function change. Only breaking the monster ipsec.[hc] into smaller constituent parts Change-Id: I3fd4d2d041673db5865d46a4002f6bd383f378af Signed-off-by: Neale Ranns <nranns@cisco.com>