aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/ipsec
AgeCommit message (Collapse)AuthorFilesLines
2018-10-23c11 safe string handling supportDave Barach11-39/+39
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-23ipsec: fix wrong counter bumpKlement Sekera1-1/+1
Change-Id: I5105b688ef3df2c949ba09e1e90c1b8913502388 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-10-22ipsec: split ipsec nodes into ip4/ip6 nodesKlement Sekera10-311/+502
Change-Id: Ic6b27659f1fe9e8df39e80a0441305e4e952195a Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-10-03ipsec: add missing ipv6 ah code & ipv6 testsKlement Sekera4-27/+103
Change-Id: I89e90193ded1beb6cb0950c15737f9467efac1c3 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-10-02IPsec: add API for SPDs dump (VPP-1363)Matus Fabian2-1/+60
Change-Id: I36e6878712c394de629a9182d2af24c53a8f811d Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-09-26forget to assign spd_index to configKingwel Xie1-0/+2
Change-Id: I35dcb987edf11097f34a633ac36d87cecd12088f Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
2018-09-24Trivial: Clean up some typos.Paul Vinciguerra6-10/+10
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-08-30Add SHA2 support to IKEv2 implementationBerenger Foucher2-8/+89
The following patch adds a stronger cryptographic suite to IKEv2 implementation. The following algorithms can now be used for integrity checking in IKEv2 implementation (responder and initiator): - hmac-sha2-256-128 - hmac-sha2-384-192 - hmac-sha2-512-256 The default integrity checking method was set to hmac-sha2-256-128. The default PRF function was set sha2-256. Change-Id: Ia82b4cbbf3067b19b8487040dbefbaf4c9319548 Signed-off-by: Berenger Foucher <berenger.foucher@stagiaires.ssi.gouv.fr>
2018-08-03ipsec: add udp-encap option to debug cli commandsRadu Nicolau5-10/+17
Change-Id: I3195afd952f6783da87224d7ceb9df13ddd39459 Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
2018-07-19Remove unused argument to vlib_feature_nextDamjan Marion2-10/+3
Change-Id: Ieb8b53977fc8484c19780941e232ee072b667de3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-13VPP-1338: fix ipsec api coverity warningsDave Barach1-4/+3
Remove useless unsigned comparisions: "(unsigned) value < 0", correct a couple of incorrect limit checks. Change-Id: I9606c4057df157f770d59535457cb9df1cfd1f35 Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-11avoid using thread local storage for thread indexDamjan Marion4-7/+7
It is cheaper to get thread index from vlib_main_t if available... Change-Id: I4582e160d06d9d7fccdc54271912f0635da79b50 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-08Fix IPsec intf tx node setup at intf creationMatthew Smith1-2/+2
When using a DPDK cryptodev with IPsec, sending outbound packets results in a crash on division by zero if using an algorithm not supported by the OpenSSL ESP nodes. This includes AES-GCM and MD5. At IPsec intf creation time, the next node at slot IPSEC_OUTPUT_NEXT_ESP_ENCRYPT for ipsec_if_tx_node_fn is set to the node named esp-encrypt. This is the OpenSSL ESP encrypt function. If DPDK cryptodevs are configured, dpdk-esp-encrypt is the correct next node. Change to setting the next node according to the value in ipsec_main.esp_encrypt_node_index. That value is set to esp-encrypt by default. If DPDK cryptodevs are configured it gets set to dpdk-esp-encrypt. Change-Id: I83896c76b975d74aead247a162c85eccca9575a8 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-07-04fix VPP-1312 Invalid UDP packet length in ipsecKlement Sekera1-1/+2
Change-Id: Ibfd0a2e7010e6e74c32244c538f60e0713bea03f Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-06-29ipsec: fix VPP-1333 - crash in ipsec policy cliKlement Sekera1-0/+6
Change-Id: I843d094b6bbd1cefba82d6026174be005e66d510 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-06-24Revert "Revert "ipsec: VPP-1316 calculate IP/TCP/UDP inner checksums""Klement Sekera5-194/+180
This reverts commit e0d2bd6bd7fc59c0c6ac48195d7f825dc99bfd91. Change-Id: If491e16f9ea66b2493a6a7c7f3c684ed585f8f51 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-06-22Revert "ipsec: VPP-1316 calculate IP/TCP/UDP inner checksums"Ole Troan5-180/+194
This reverts commit a98346f664aae148d26a8e158008b773d73db96f. Change-Id: Iee5b3a5ddff0e8fd3a30fe5973cee24de434fe12 Signed-off-by: Ole Troan <ot@cisco.com>
2018-06-21ipsec: VPP-1316 calculate IP/TCP/UDP inner checksumsKlement Sekera5-194/+180
Calculate IP/TCP/UDP checksums in software before adding authentication. Change-Id: I3e121cb00aeba667764f39ade8d62170f18f8b6b Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-06-20ipsec: VPP-1308 fix sorting of SPD entriesKlement Sekera2-10/+11
Change-Id: I761aced55b7cef51a9b47048283b2cb9430bcde2 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-05-29ipsec: fix IKEv2 crash when rsa cert is used for authenticationRadu Nicolau1-0/+1
Cause: EVP_MD_CTX object used but not initialized. Change-Id: I390b2acf580f16415685563fa52e56717efc7be7 Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
2018-05-22CSIT-928 dpdk/ipsec: performance improvementRadu Nicolau1-7/+5
Replace hash with a vector to improve performance. Plus other minor performance improvements. Change-Id: I3f0ebd909782ce3727f6360ce5ff5ddd131f8574 Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
2018-05-16Drop IPsec packets when interface is downMatthew Smith1-10/+32
Packets arriving on an IPsec tunnel interface are decrypted and forwarded even if the interface is down. Check interface flags. If the interface is down, cause packet to be dropped and increment the counters for drops. Change-Id: I94456bda3bd8eade0f3f522ad7cc341251174e6e Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-05-11VPP-1275 Fix memory leaks in IPsec CLIKlement Sekera1-54/+83
Change-Id: I1f7c634328f25b33580a215af2daeb498cd3b181 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-05-10Change the way IP header pointer is calculated in esp_decrypt nodesSzymon Sliwa2-3/+11
The pointer to IP header was derived from l3_hdr_offset, which would be ok, if l3_hdr_offset was valid. But it does not have to be, so it was a bad solution. Now the previous nodes mark whether it is a IPv6 or IPv4 packet tyle, and in esp_decrypt we count get ip header pointer by substracting the size of the ip header from the pointer to esp header (which lies in front of the ip header). Change-Id: I6d425b90931053711e8ce9126811b77ae6002a16 Signed-off-by: Szymon Sliwa <szs@semihalf.com>
2018-05-09ipsec: support UDP encap/decap for NAT traversalKlement Sekera8-33/+89
Change-Id: I65c12617ad49e4d5ef242e53988782f0cefa5684 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-05-04ipsec: allow null/null for crypto/integ algorithms pairRadu Nicolau2-3/+3
Change-Id: Ic1e189c22e3d344d165e0eab05ccb667eef088a9 Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
2018-05-04Harmonize vec/pool_get_aligned object sizes and alignment requestsDave Barach1-0/+2
Object sizes must evenly divide alignment requests, or vice versa. Otherwise, only the first object will be aligned as requested. Three choices: add CLIB_CACHE_LINE_ALIGN_MARK(align_me) at the end of structures, manually pad to an even divisor or multiple of the alignment request, or use plain vectors/pools. static assert for enforcement. Change-Id: I41aa6ff1a58267301d32aaf4b9cd24678ac1c147 Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-04-25Fix some build warnings about "Old Style VLA"Juraj Sloboda1-2/+2
Change-Id: I69fee1dcf07a4d2eed69a59f0a36e63e3741ed4e Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-04-19Allow an IPsec tunnel interface to be renumberedMatthew Smith5-29/+42
When creating an IPsec tunnel interface, allow a numeric identifier to be set for use in the interface's name in place of the dev instance. Default to using the dev instance if no value is explicitly set. When an IPsec tunnel is deleted, the interface is deleted now instead of being kept in a pool of available hw interfaces. Otherwise there was the possibility of conflicting tx node names between deleted tunnels and newly created ones. Change-Id: Ic525466622a0dec38a845fa5871c084f6d9da380 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-04-18Fix the ip header offset counting in vnet/ipsecSzymon Sliwa1-5/+4
IP header is set as data + sizeof(ethernet_header_t), what does not need to be true. The solution is to use l3_hdr_offset. Change-Id: I5d9f41599ba8d8eb14ce2d9d523f82ea6e0fd10d Signed-off-by: Szymon Sliwa <szs@semihalf.com>
2018-04-10Make IPsec tunnel intf work with IPv4 output featuresMatthew Smith1-0/+7
With no IPv4 output features on an IPsec tunnel inferface, when packets are forwarded to that interface, they reach the ipsec-if-output node via the output_node_index on the hw interface and they are handled correctly. When an IPv4 output feature (e.g. output ACL, outbound NAT) is enabled on an IPsec tunnel interface, outbound IPsec stops working for that interface. The last node in the ip4-output feature arc is interface-output. From there a packet is sent to ipsec<N>-output, and then ipsec<N>-tx. The tx function for an IPsec tunnel interface that is called by ipsec<N>-tx is a dummy that doesn't do anything except write a warning message. Enable a feature on the interface-output feature arc for an IPsec tunnel interface so the ipsec-if-output node is reached from the interface-output node. Change-Id: Ia9c73d3932f5930ec7ce0791a0375b1d37148b01 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-03-23IPSEC_AH: broken initialization (VPP-1208)Marco Varlese1-1/+1
The init-path for IPSEC_AH where the CTX gets initialized is broken since the for-loop never executes due to the wrong usage of tm->n_vlib_mains which being subtracted by 1. Change-Id: I4d967f52cd3ca061aa60d824d65f446e06162403 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-03-16IPSec: fix IPv6 policy deletingMatus Fabian1-1/+1
Change-Id: I9f487d6033edde09557709f94f97fc8a70246b09 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-01-24SCTP stack (RFC4960)Marco Varlese1-2/+6
== CONTENT == * SCTP chunks definition as per RFC4960; * Helper functions to set/get values to/from the corresponding chunks; * Hooks to the session/application layers; * Complete state-machine handling; * Implementation for unexpected chunk received in a certain state (state-machine error handling) * Support for 1-single connection; * Sample application to test receive/transmit data-path; * Test to validate SCTP stack; Change-Id: I1b55c455ab400be9513f4e094dadfc3181d2ebc9 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-01-23VPPAPIGEN: vppapigen replacement in Python PLY.Ole Troan1-1/+1
This is a version of the VPP API generator in Python PLY. It supports the existing language, and has a plugin architecture for generators. Currently C and JSON are supported. Changes: - vl_api_version to option version = "major.minor.patch" - enum support - Added error checking and reporting - import support (removed the C pre-processor) - services (tying request/reply together) Version: option version = "1.0.0"; Enum: enum colours { RED, BLUE = 50, }; define foo { vl_api_colours_t colours; }; Services: service { rpc foo returns foo_reply; rpc foo_dump returns stream foo_details; rpc want_stats returns want_stats_reply events ip4_counters, ip6_counters; }; Future planned features: - unions - bool, text - array support (including length) - proto3 output plugin - Refactor C/C++ generator as a plugin - Refactor Java generator as a plugin Change-Id: Ifa289966c790e1b1a8e2938a91e69331e3a58bdf Signed-off-by: Ole Troan <ot@cisco.com>
2018-01-11api: remove transport specific code from handlersFlorin Coras1-12/+13
This does not update api client code. In other words, if the client assumes the transport is shmem based, this patch does not change that. Furthermore, code that checks queue size, for tail dropping, is not updated. Done for the following apis: Plugins - acl - gtpu - memif - nat - pppoe VNET - bfd - bier - tapv2 - vhost user - dhcp - flow - geneve - ip - punt - ipsec/ipsec-gre - l2 - l2tp - lisp-cp/one-cp - lisp-gpe - map - mpls - policer - session - span - udp - tap - vxlan/vxlan-gpe - interface VPP - api/api.c OAM - oam_api.c Stats - stats.c Change-Id: I0e33ecefb2bdab0295698c0add948068a5a83345 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-01-09api: refactor vlibmemoryFlorin Coras1-5/+4
- separate client/server code for both memory and socket apis - separate memory api code from generic vlib api code - move unix_shared_memory_fifo to svm and rename to svm_fifo_t - overall declutter Change-Id: I90cdd98ff74d0787d58825b914b0f1eafcfa4dc2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-12-15ESP_AH_test_automation_scripts rev1“mystarrocks”1-7/+0
Change-Id: I941abdc4a02e4c52c66b9d299e380b27caca7c1d Signed-off-by: “mystarrocks” <mystarrocks@yahoo.com>
2017-11-29DES-CBC/3DES-CBC support for VPP IPSec Core“mukeshyadav1984”4-26/+57
Change-Id: I876f215b129e5e59d3acc6447ce40458cc341eba Signed-off-by: “mukeshyadav1984” <mukyadav@cisco.com>
2017-11-28IPSec AH protocol enhancement in VPP native core“mukeshyadav1984”12-55/+889
Change-Id: Iec5804d768485f4015bbf732d8d19ef2f24e6939 Signed-off-by: “mukeshyadav1984” <mukyadav@cisco.com>
2017-11-10Allow Openssl 1.1.0Marco Varlese5-12/+159
This patch addresses all the code changes required to VPP to support openssl 1.1.0 API. All the changes have been done so that VPP can still be built against current openssl API whilst forward-looking to version 1.1.0. Change-Id: I65e22c53c5decde7a15c7eb78a62951ee246b8dc Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2017-11-10Fix bug in key calculation for IPsec tunnel interfaceMatthew Smith1-2/+2
When IPsec tunnel interface has the inbound SA updated, the key used to find the right interface for inbound packets was being generated using the destination address instead of the source. Change-Id: Id5a6fb1511637c912b329aad65188789646a5889 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2017-10-26Allow IPsec interface to have SAs resetMatthew Smith5-1/+123
Make it easier to integrate with external IKE daemon. IPsec interfaces can have one or both SAs replaced after creation. This allows for the possibility of setting a new child SA on an interface when rekeying occurs. It also allows for the possibility of creating an interface ahead of time and updating the SA when parameters that are negotiated during IKE exchange become known. Change-Id: I0a31afdcc2bdff7098a924a51abbc58bdab2bd08 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2017-10-24Add extern to *_main global variable declarations in header files.Dave Wallace6-3/+8
- Global variables declared in header files without the use of the 'extern' keword will result in multiple instances of the variable to be created by the compiler -- one for each different source file in which the the header file is included. This results in wasted memory allocated in the BSS segments as well as potentially introducing bugs in the application. Change-Id: I6ef1790b60a0bd9dd3994f8510723decf258b0cc Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-10-14Add API call to set keys on IPsec tunnel intfMatthew Smith2-0/+75
There was already a CLI command and a libvnet function to set the keys on an existing IPsec tunnel interface. Expose this via the API. Change-Id: I226a9616f680fc022f04447177a2e8232690657f Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2017-10-12dpdk/ipsec: coverity fixesSergio Gonzalez Monroy1-9/+20
Change-Id: Ica3bc74ffbb1c0df4e198b0abff8df10cdeb2182 Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2017-10-09vppapigen: support per-file (major,minor,patch) version stampsDave Barach1-0/+2
Add one of these statements to foo.api: vl_api_version 1.2.3 to generate a version tuple stanza in foo.api.h: /****** Version tuple *****/ vl_api_version_tuple(foo, 1, 2, 3) Change-Id: Ic514439e4677999daa8463a94f948f76b132ff15 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Ole Troan <ot@cisco.com>
2017-10-05dpdk/ipsec: rework plus improved cli commandsSergio Gonzalez Monroy5-44/+100
This patch reworks the DPDK ipsec implementation including the cryptodev management as well as replacing new cli commands for better usability. For the data path: - The dpdk-esp-encrypt-post node is not necessary anymore. - IPv4 packets in the decrypt path are sent to ip4-input-no-checksum instead of ip4-input. The DPDK cryptodev cli commands are replaced by the following new commands: - show dpdk crypto devices - show dpdk crypto placement [verbose] - set dpdk crypto placement (<device> <thread> | auto) - clear dpdk crypto placement <device> [<thread>] - show dpdk crypto pools Change-Id: I47324517ede82d3e6e0e9f9c71c1a3433714b27b Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2017-10-04Add API support to dump IPsec SAsMatthew Smith2-0/+175
Add an API request message type to dump IPsec SAs. Either all IPsec SAs can be dumped or it can be limited to a single SA ID (numeric ID set at creation time - not an index). Add a handler for incoming messages with the new request type. Add an API response message type containing the data for an IPsec SA. Add VAT support for new message type. Change-Id: Id7828d000efc637dee7f988a87d3f707a8b466b7 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2017-09-19Set RX sw_if_index on decrypted routed IPsec buffersMatthew Smith2-0/+3
For routed IPsec, set the RX sw_if_index on inbound packets to the index of the IPsec interface. When a packet is decrypted into a new buffer, bring along the RX sw_if_index of the encrypted packet to the new buffer. Change-Id: I093e9d37def2082c8d2f1deb96b1c5b97126e023 Signed-off-by: Matthew Smith <mgsmith@netgate.com>