| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Change-Id: I238258cdeb77035adc5e88903d824593d0a1da90
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I49e5ce0aae6e4ff634024387ceaf7dbc432a0351
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
In the CLI parsing, below is a common pattern:
/* Get a line of input. */
if (!unformat_user (input, unformat_line_input, line_input))
return 0;
while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
{
if (unformat (line_input, "x"))
x = 1;
:
else
return clib_error_return (0, "unknown input `%U'",
format_unformat_error, line_input);
}
unformat_free (line_input);
The 'else' returns if an unknown string is encountered. There a memory
leak because the 'unformat_free(line_input)' is not called. There is a
large number of instances of this pattern.
Replaced the previous pattern with:
/* Get a line of input. */
if (!unformat_user (input, unformat_line_input, line_input))
return 0;
while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
{
if (unformat (line_input, "x"))
x = 1;
:
else
{
error = clib_error_return (0, "unknown input `%U'",
format_unformat_error, line_input);
goto done:
}
}
/* ...Remaining code... */
done:
unformat_free (line_input);
return error;
}
In multiple files, 'unformat_free (line_input);' was never called, so
there was a memory leak whether an invalid string was entered or not.
Also, there were multiple instance where:
error = clib_error_return (0, "unknown input `%U'",
format_unformat_error, line_input);
used 'input' as the last parameter instead of 'line_input'. The result
is that output did not contain the substring in error, instead just an
empty string. Fixed all of those as well.
There are a lot of file, and very mind numbing work, so tried to keep
it to a pattern to avoid mistakes.
Change-Id: I8902f0c32a47dd7fb3bb3471a89818571702f1d2
Signed-off-by: Billy McFall <bmcfall@redhat.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- IKE_SA_INIT and IKE_AUTH initial exchanges
- Delete IKA SA
- Rekey and delete Child SA
- Child SAs lifetime policy
To set up one VPP instance as the initiator use the following CLI commands (or API equivalents):
ikev2 profile set <id> responder <interface> <addr>
ikev2 profile set <id> ike-crypto-alg <crypto alg> <key size> ike-integ-alg <integ alg> ike-dh <dh type>
ikev2 profile set <id> esp-crypto-alg <crypto alg> <key size> esp-integ-alg <integ alg> esp-dh <dh type>
ikev2 profile set <id> sa-lifetime <seconds> <jitter> <handover> <max bytes>
and finally
ikev2 initiate sa-init <profile id> to initiate the IKE_SA_INIT exchange
Child SA re-keying process:
1. Child SA expires
2. A new Child SA is created using the Child SA rekey exchange
3. For a set time both SAs are alive
4. After the set time interval expires old SA is deleted
Any additional settings will not be carried over (i.e. settings of the ipsec<x> interface associated with the Child SA)
CLI API additions:
ikev2 profile set <id> responder <interface> <addr>
ikev2 profile set <id> ike-crypto-alg <crypto alg> <key size> ike-integ-alg <integ alg> ike-dh <dh type>
ikev2 profile set <id> esp-crypto-alg <crypto alg> <key size> esp-integ-alg <integ alg> esp-dh <dh type>
ikev2 profile set <id> sa-lifetime <seconds> <jitter> <handover> <max bytes>
ikev2 initiate sa-init <profile id>
ikev2 initiate del-child-sa <child sa ispi>
ikev2 initiate del-sa <sa ispi>
ikev2 initiate rekey-child-sa <profile id> <child sa ispi>
Sample configurations:
Responder:
ikev2 profile add pr1
ikev2 profile set pr1 auth shared-key-mic string Vpp123
ikev2 profile set pr1 id local fqdn vpp.home.responder
ikev2 profile set pr1 id remote fqdn vpp.home.initiator
ikev2 profile set pr1 traffic-selector remote ip-range 192.168.125.0 - 192.168.125.255 port-range 0 - 65535 protocol 0
ikev2 profile set pr1 traffic-selector local ip-range 192.168.124.0 - 192.168.124.255 port-range 0 - 65535 protocol 0
Initiator:
ikev2 profile add pr1
ikev2 profile set pr1 auth shared-key-mic string Vpp123
ikev2 profile set pr1 id local fqdn vpp.home.initiator
ikev2 profile set pr1 id remote fqdn vpp.home.responder
ikev2 profile set pr1 traffic-selector local ip-range 192.168.125.0 - 192.168.125.255 port-range 0 - 65535 protocol 0
ikev2 profile set pr1 traffic-selector remote ip-range 192.168.124.0 - 192.168.124.255 port-range 0 - 65535 protocol 0
ikev2 profile set pr1 responder TenGigabitEthernet3/0/1 192.168.40.20
ikev2 profile set pr1 ike-crypto-alg aes-cbc 192 ike-integ-alg sha1-96 ike-dh modp-2048
ikev2 profile set pr1 esp-crypto-alg aes-cbc 192 esp-integ-alg sha1-96 esp-dh ecp-256
ikev2 profile set pr1 sa-lifetime 3600 10 5 0
Change-Id: I1db9084dc787129ea61298223fb7585a6f7eaf9e
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
|
|
fixes a problem that occurs with cryptodev ipv6 input.
Change-Id: I1f0c0db45b2aabc243dd785c8d5d5ef990cac903
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
|
|
Change-Id: I2330cb7c2ba0f5eaeb4e7a4c3de4f22283d3923d
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
|
|
Build Cryptodev IPsec support by default when DPDK is enabled but only build
hardware Cryptodev PMDs.
To enable Cryptodev support, a new startup.conf option for dpdk has been
introduced 'enable-cryptodev'.
During VPP init, if Cryptodev support is not enabled or not enough cryptodev
resources are available then default to OpenSSL ipsec implementation.
Change-Id: I5aa7e0d5c2676bdb41d775ef40364536a081956d
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
|
|
This replaces --without-ipsec and --without-ipv6sr
and allows other parts of the code to be disabled if
libssl is not available.
Change-Id: Id97ff3685a7924d7f86622952e0405d94ceb5957
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
Damjan Marion
Dave Barach
Billy McFall
Radu Nicolau
Sergio Gonzalez Monroy