aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/ipsec
AgeCommit message (Collapse)AuthorFilesLines
2017-05-17Use counters on ipsec tunnel interfacesMatthew Smith3-6/+107
Increment byte & packet counters when packets are sent or received on an IPsec tunnel interface. Set counters to zero when the interface is deleted. Change-Id: Ie9584aa82778875dd4d0c931005f7720b4d5c76d Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2017-05-15Add sw_if_index of tunnel interface to API reply for ipsec_tunnel_if_add_delMatthew Smith4-15/+36
Change-Id: If5158f6fa7344dee94548c93dace779430e0647f Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2017-05-09API support for IPsec tunnel interface creationMatthew Smith2-1/+87
Change-Id: I8c9f886cb95e92adbe1c646844789ca0a6bb6140 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2017-04-27VPP-716: IKEv2 responder fails to authenticate initiatorMatthew Smith1-15/+16
Fix handling of IDi and IDr when processing payloads in ikev2_process_auth_req Change-Id: If0d4441dc89f08f3753f38987406c002d43558ec Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2017-04-25"autoreply" flag: autogenerate standard xxx_reply_t messagesDave Barach1-205/+19
Change-Id: I72298aaae7d172082ece3a8edea4217c11b28d79 Signed-off-by: Dave Barach <dave@barachs.net>
2017-04-06Use thread local storage for thread indexDamjan Marion6-51/+61
This patch deprecates stack-based thread identification, Also removes requirement that thread stacks are adjacent. Finally, possibly annoying for some folks, it renames all occurences of cpu_index and cpu_number with thread index. Using word "cpu" is misleading here as thread can be migrated ti different CPU, and also it is not related to linux cpu index. Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-10Fix coverity CIDs 161048, 163895Pavel Kotucek1-2/+1
Change-Id: Ic206601413bb366e2a920daf00524e92a47287ef Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-03-01dpdk: be a pluginDamjan Marion1-4/+0
Change-Id: I238258cdeb77035adc5e88903d824593d0a1da90 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-01VPP-598: tcp stack initial commitDave Barach3-3/+3
Change-Id: I49e5ce0aae6e4ff634024387ceaf7dbc432a0351 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-02-22VPP-635: CLI Memory leak with invalid parameterBilly McFall1-55/+122
In the CLI parsing, below is a common pattern: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else return clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); } unformat_free (line_input); The 'else' returns if an unknown string is encountered. There a memory leak because the 'unformat_free(line_input)' is not called. There is a large number of instances of this pattern. Replaced the previous pattern with: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else { error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); goto done: } } /* ...Remaining code... */ done: unformat_free (line_input); return error; } In multiple files, 'unformat_free (line_input);' was never called, so there was a memory leak whether an invalid string was entered or not. Also, there were multiple instance where: error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); used 'input' as the last parameter instead of 'line_input'. The result is that output did not contain the substring in error, instead just an empty string. Fixed all of those as well. There are a lot of file, and very mind numbing work, so tried to keep it to a pattern to avoid mistakes. Change-Id: I8902f0c32a47dd7fb3bb3471a89818571702f1d2 Signed-off-by: Billy McFall <bmcfall@redhat.com> Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-17Implemented IKEv2 initiator features:Radu Nicolau11-186/+2176
- IKE_SA_INIT and IKE_AUTH initial exchanges - Delete IKA SA - Rekey and delete Child SA - Child SAs lifetime policy To set up one VPP instance as the initiator use the following CLI commands (or API equivalents): ikev2 profile set <id> responder <interface> <addr> ikev2 profile set <id> ike-crypto-alg <crypto alg> <key size> ike-integ-alg <integ alg> ike-dh <dh type> ikev2 profile set <id> esp-crypto-alg <crypto alg> <key size> esp-integ-alg <integ alg> esp-dh <dh type> ikev2 profile set <id> sa-lifetime <seconds> <jitter> <handover> <max bytes> and finally ikev2 initiate sa-init <profile id> to initiate the IKE_SA_INIT exchange Child SA re-keying process: 1. Child SA expires 2. A new Child SA is created using the Child SA rekey exchange 3. For a set time both SAs are alive 4. After the set time interval expires old SA is deleted Any additional settings will not be carried over (i.e. settings of the ipsec<x> interface associated with the Child SA) CLI API additions: ikev2 profile set <id> responder <interface> <addr> ikev2 profile set <id> ike-crypto-alg <crypto alg> <key size> ike-integ-alg <integ alg> ike-dh <dh type> ikev2 profile set <id> esp-crypto-alg <crypto alg> <key size> esp-integ-alg <integ alg> esp-dh <dh type> ikev2 profile set <id> sa-lifetime <seconds> <jitter> <handover> <max bytes> ikev2 initiate sa-init <profile id> ikev2 initiate del-child-sa <child sa ispi> ikev2 initiate del-sa <sa ispi> ikev2 initiate rekey-child-sa <profile id> <child sa ispi> Sample configurations: Responder: ikev2 profile add pr1 ikev2 profile set pr1 auth shared-key-mic string Vpp123 ikev2 profile set pr1 id local fqdn vpp.home.responder ikev2 profile set pr1 id remote fqdn vpp.home.initiator ikev2 profile set pr1 traffic-selector remote ip-range 192.168.125.0 - 192.168.125.255 port-range 0 - 65535 protocol 0 ikev2 profile set pr1 traffic-selector local ip-range 192.168.124.0 - 192.168.124.255 port-range 0 - 65535 protocol 0 Initiator: ikev2 profile add pr1 ikev2 profile set pr1 auth shared-key-mic string Vpp123 ikev2 profile set pr1 id local fqdn vpp.home.initiator ikev2 profile set pr1 id remote fqdn vpp.home.responder ikev2 profile set pr1 traffic-selector local ip-range 192.168.125.0 - 192.168.125.255 port-range 0 - 65535 protocol 0 ikev2 profile set pr1 traffic-selector remote ip-range 192.168.124.0 - 192.168.124.255 port-range 0 - 65535 protocol 0 ikev2 profile set pr1 responder TenGigabitEthernet3/0/1 192.168.40.20 ikev2 profile set pr1 ike-crypto-alg aes-cbc 192 ike-integ-alg sha1-96 ike-dh modp-2048 ikev2 profile set pr1 esp-crypto-alg aes-cbc 192 esp-integ-alg sha1-96 esp-dh ecp-256 ikev2 profile set pr1 sa-lifetime 3600 10 5 0 Change-Id: I1db9084dc787129ea61298223fb7585a6f7eaf9e Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
2017-02-17ipsec: changed ipsec-input-ip6 node to be a sibling of ipsec-input-ip4, ↵Radu Nicolau1-6/+1
fixes a problem that occurs with cryptodev ipv6 input. Change-Id: I1f0c0db45b2aabc243dd785c8d5d5ef990cac903 Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
2017-01-30Fixed set int state up for ipsec interfacesRadu Nicolau1-2/+2
Change-Id: I2330cb7c2ba0f5eaeb4e7a4c3de4f22283d3923d Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
2017-01-27dpdk: rework cryptodev ipsec build and setupSergio Gonzalez Monroy9-203/+148
Build Cryptodev IPsec support by default when DPDK is enabled but only build hardware Cryptodev PMDs. To enable Cryptodev support, a new startup.conf option for dpdk has been introduced 'enable-cryptodev'. During VPP init, if Cryptodev support is not enabled or not enough cryptodev resources are available then default to OpenSSL ipsec implementation. Change-Id: I5aa7e0d5c2676bdb41d775ef40364536a081956d Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2017-01-16Add --without-libssl configure parameterDamjan Marion2-13/+13
This replaces --without-ipsec and --without-ipv6sr and allows other parts of the code to be disabled if libssl is not available. Change-Id: Id97ff3685a7924d7f86622952e0405d94ceb5957 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion21-0/+10534
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>