summaryrefslogtreecommitdiffstats
path: root/src/vnet/ipsec
AgeCommit message (Collapse)AuthorFilesLines
2022-03-10ipsec: remove the redundant codeMohsin Kazmi1-1/+0
Type: refactor Change-Id: I0a40e22e1439e13ffdbcbd6fd7cad40c8178418c Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2022-03-08ipsec: input: drop by default for non-matching pktsZachary Leaf1-0/+14
As per IPSec RFC4301 [1], any non-matching packets should be dropped by default. This is handled correctly in ipsec_output.c, however in ipsec_input.c non-matching packets are allowed to pass as per a matched BYPASS rule. For full details, see: https://lists.fd.io/g/vpp-dev/topic/ipsec_input_output_default/84943480 It appears the ipsec6_input_node only matches PROTECT policies. Until this is extended to handle BYPASS + DISCARD, we may wish to not drop by default here, since all IPv6 traffic not matching a PROTECT policy will be dropped. [1]: https://datatracker.ietf.org/doc/html/rfc4301 Type: fix Signed-off-by: Zachary Leaf <zachary.leaf@arm.com> Change-Id: Iddbfd008dbe082486d1928f6a10ffbd83d859a20
2022-02-18ipsec: fix vector after remove entry in spdGabriel Oginski1-1/+1
Originally after remove the policy entry in spd, macro "vec_del1" can change localization of the last entry in vector and finally the entry list has not been sorted. This patch fixes this issue by change executed macro "vec_delete" instead of "vec_del1". Type: fix Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com> Change-Id: I396591cbbe17646e1d243aedb4cdc272ed4d5e25
2022-02-17ipsec: Improve the handling of NAT-T keepalive messagesNeale Ranns1-8/+21
Type: improvement Ethernet frames on the wire are a minimum of 64 bytes, so use the length in the UDP header to determine if the ESP payload is one bytes of the special SPI, rather than the buffer's size (which will include the ethernet header's padding). In the case of drop advance the packet back to the IP header so the ipx-drop node sees a sane packet. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ic3b75487919f0c77507d6f725bd11202bc5afee8
2022-01-17ipsec: IPSec interface correct drop w/ no protectionNeale Ranns3-8/+19
Type: improvement When an IPSec interface is first constructed, the end node of the feature arc is not changed, which means it is interface-output. This means that traffic directed into adjacencies on the link, that do not have protection (w/ an SA), drop like this: ... 00:00:01:111710: ip4-midchain tx_sw_if_index 4 dpo-idx 24 : ipv4 via 0.0.0.0 ipsec0: mtu:9000 next:6 flags:[] stacked-on: [@1]: dpo-drop ip4 flow hash: 0x00000000 00000000: 4500005c000100003f01cb8cac100202010101010800ecf40000000058585858 00000020: 58585858585858585858585858585858585858585858585858585858 00:00:01:111829: local0-output ipsec0 00000000: 4500005c000100003f01cb8cac100202010101010800ecf40000000058585858 00000020: 5858585858585858585858585858585858585858585858585858585858585858 00000040: 58585858585858585858585858585858585858585858585858585858c2cf08c0 00000060: 2a2c103cd0126bd8b03c4ec20ce2bd02dd77b3e3a4f49664 00:00:01:112017: error-drop rx:pg1 00:00:01:112034: drop local0-output: interface is down although that's a drop, no packets should go to local0, and we want all IPvX packets to go through ipX-drop. This change sets the interface's end-arc node to the appropriate drop node when the interface is created, and when the last protection is removed. The resulting drop is: ... 00:00:01:111504: ip4-midchain tx_sw_if_index 4 dpo-idx 24 : ipv4 via 0.0.0.0 ipsec0: mtu:9000 next:0 flags:[] stacked-on: [@1]: dpo-drop ip4 flow hash: 0x00000000 00000000: 4500005c000100003f01cb8cac100202010101010800ecf40000000058585858 00000020: 58585858585858585858585858585858585858585858585858585858 00:00:01:111533: ip4-drop ICMP: 172.16.2.2 -> 1.1.1.1 tos 0x00, ttl 63, length 92, checksum 0xcb8c dscp CS0 ecn NON_ECN fragment id 0x0001 ICMP echo_request checksum 0xecf4 id 0 00:00:01:111620: error-drop rx:pg1 00:00:01:111640: drop null-node: blackholed packets Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I7e7de23c541d9f1210a05e6984a688f1f821a155
2021-12-14api: verify message size on receiptKlement Sekera1-0/+4
When a message is received, verify that it's sufficiently large to accomodate any VLAs within message. To do that, we need a way to calculate message size including any VLAs. This patch adds such funcionality to vppapigen and necessary C code to use those to validate message size on receipt. Drop messages which are malformed. Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I2903aa21dee84be6822b064795ba314de46c18f4
2021-12-04ipsec: fix async buffer leakMatthew Smith3-3/+2
Type: fix Fixes: f16e9a5507 If an attempt to submit an async crypto frame fails, the buffers that were added to the frame are supposed to be dropped. This was not happening and they are leaking, resulting in buffer exhaustion. There are two issues: 1. The return value of esp_async_recycle_failed_submit() is used to figure out how many buffers should be dropped. That function calls vnet_crypto_async_reset_frame() and then returns f->n_elts. Resetting the frame sets n_elts to 0. So esp_async_recycle_failed_submit() always returns 0. It is safe to remove the call to reset the frame because esp_async_recycle_failed_submit() is called in 2 places and a call to reset the frame is made immediately afterwards in both cases - so it is currently unnecessary anyway. 2. An array and an index are passed to esp_async_recycle_failed_submit(). The index should indicate the position in the array where indices of the buffers contained in the frame should be written. Across multiple calls, the same index value (n_sync) is passed. This means each call may overwrite the same entries in the array with the buffer indices in the frame rather than appending them to the entries which were written earlier. Pass n_noop as the index instead of n_sync. Change-Id: I525ab3c466965446f6c116f4c8c5ebb678a66d84 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2021-12-03ip: extension header parsing fails for fragment headerOle Troan1-3/+14
Refactor and improve boundary checking on IPv6 extension header handling. Limit parsing of IPv6 extension headers to a maximum of 4 headers and a depth of 256 bytes. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Ide40aaa2b482ceef7e92f02fa0caeadb3b8f7556 Signed-off-by: Ole Troan <ot@cisco.com>
2021-11-19fib: Don't use [midchain] adjacencies to change an interface's feature arcNeale Ranns8-192/+123
Type: fix Using the adjacency to modify the interface's feature arc doesn't work, since there are potentially more than one adj per-interface. Instead have the interface, when it is created, register what the end node of the feature arc is. This end node is then also used as the interface's tx node (i.e. it is used as the adjacency's next-node). rename adj-midhcain-tx as 'tunnel-output', that's a bit more intuitive. There's also a fix in config string handling to: 1- prevent false sharing of strings when the end node of the arc is different. 2- call registered listeners when the end node is changed For IPSec the consequences are that one cannot provide per-adjacency behaviour using different end-nodes - this was previously done for the no-SA and an SA with no protection. These cases are no handled in the esp-encrypt node. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: If3a83d03a3000f28820d9a9cb4101d244803d084
2021-11-03ipsec: Support the single IPSec interface dumpNeale Ranns1-0/+5
Type: fix Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I93c819cdd802f0980a981d1fc5561d65b35d3382
2021-10-31ipsec: silence gcc-11 parentheses warningDamjan Marion1-1/+1
Type: fix This reverts commit 5ecda99d673298e5bf3c906e9bf6682fdcb57d83. Change-Id: I393c7d8a6b32aa4f178d6b6dac025038bbf10fe6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-10-22ipsec: add api test fileFilip Tehlar1-0/+597
Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: Ib3fe4f306f23541a01246b74ad0f1a7074fa03bb
2021-10-12ipsec: Performance improvement of ipsec4_output_node using flow cacheGovindarajan Mohandoss7-17/+264
Adding flow cache support to improve outbound IPv4/IPSec SPD lookup performance. Details about flow cache: Mechanism: 1. First packet of a flow will undergo linear search in SPD table. Once a policy match is found, a new entry will be added into the flow cache. From 2nd packet onwards, the policy lookup will happen in flow cache. 2. The flow cache is implemented using bihash without collision handling. This will avoid the logic to age out or recycle the old flows in flow cache. Whenever a collision occurs, old entry will be overwritten by the new entry. Worst case is when all the 256 packets in a batch result in collision and fall back to linear search. Average and best case will be O(1). 3. The size of flow cache is fixed and decided based on the number of flows to be supported. The default is set to 1 million flows. This can be made as a configurable option as a next step. 4. Whenever a SPD rule is added/deleted by the control plane, the flow cache entries will be completely deleted (reset) in the control plane. The assumption here is that SPD rule add/del is not a frequent operation from control plane. Flow cache reset is done, by putting the data plane in fall back mode, to bypass flow cache and do linear search till the SPD rule add/delete operation is complete. Once the rule is successfully added/deleted, the data plane will be allowed to make use of the flow cache. The flow cache will be reset only after flushing out the inflight packets from all the worker cores using vlib_worker_wait_one_loop(). Details about bihash usage: 1. A new bihash template (16_8) is added to support IPv4 5 tuple. BIHASH_KVP_PER_PAGE and BIHASH_KVP_AT_BUCKET_LEVEL are set to 1 in the new template. It means only one KVP is supported per bucket. 2. Collision handling is avoided by calling BV (clib_bihash_add_or_overwrite_stale) function. Through the stale callback function pointer, the KVP entry will be overwritten during collision. 3. Flow cache reset is done using BV (clib_bihash_foreach_key_value_pair) function. Through the callback function pointer, the KVP value is reset to ~0ULL. MRR performance numbers with 1 core, 1 ESP Tunnel, null-encrypt, 64B for different SPD policy matching indices: SPD Policy index : 1 10 100 1000 Throughput : MPPS/MPPS MPPS/MPPS MPPS/MPPS KPPS/MPPS (Baseline/Optimized) ARM Neoverse N1 : 5.2/4.84 4.55/4.84 2.11/4.84 329.5/4.84 ARM TX2 : 2.81/2.6 2.51/2.6 1.27/2.6 176.62/2.6 INTEL SKX : 4.93/4.48 4.29/4.46 2.05/4.48 336.79/4.47 Next Steps: Following can be made as a configurable option through startup conf at IPSec level: 1. Enable/Disable Flow cache. 2. Bihash configuration like number of buckets and memory size. 3. Dual/Quad loop unroll can be applied around bihash to further improve the performance. 4. The same flow cache logic can be applied for IPv6 as well as in IPSec inbound direction. A deeper and wider flow cache using bihash_40_8 can replace existing bihash_16_8, to make it common for both IPv4 and IPv6 in both outbound and inbound directions. Following changes are made based on the review comments: 1. ON/OFF flow cache through startup conf. Default: OFF 2. Flow cache stale entry detection using epoch counter. 3. Avoid host order endianness conversion during flow cache lookup. 4. Move IPSec startup conf to a common file. 5. Added SPD flow cache unit test case 6. Replaced bihash with vectors to implement flow cache. 7. ipsec_add_del_policy API is not mpsafe. Cleaned up inflight packets check in control plane. Type: improvement Signed-off-by: mgovind <govindarajan.Mohandoss@arm.com> Signed-off-by: Zachary Leaf <zachary.leaf@arm.com> Tested-by: Jieqiang Wang <jieqiang.wang@arm.com> Change-Id: I62b4d6625fbc6caf292427a5d2046aa5672b2006
2021-10-11docs: nitfixes in FEATURE.yamlNathan Skrzypczak1-1/+1
Type: improvement Change-Id: Iec585880085b12b08594a0640822cd831455d594 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-10-07ipsec: fix protect update log if nexthop is NULLBenoît Ganne1-2/+3
If logging is on, it will try to print the address nh. Make sure it is not NULL. Type: fix Change-Id: I81c0295865901406d86e0d822a103b4d5adffe47 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-10-06docs: vnet comment nitfixesNathan Skrzypczak1-2/+2
Type: improvement Change-Id: Iac01d7830b53819ace8f199554be10ab89ecdb97 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-09-29ipsec: Record the number of packets lost from an SANeale Ranns6-22/+88
Type: feature Gaps in the sequence numbers received on an SA indicate packets that were lost. Gaps are identified using the anti-replay window that records the sequences seen. Publish the number of lost packets in the stats segment at /net/ipsec/sa/lost Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I8af1c09b7b25a705e18bf82e1623b3ce19e5a74d
2021-07-29ipsec: move startup config to common fileZachary Leaf3-51/+55
The ipsec startup.conf config currently exists in ipsec_tun.c. This is because currently the only ipsec{...} options are tunnel related. This patch moves the ipsec config to a common file (ipsec.c) for future extensibility/addition of non-tunnel related config options. Type: refactor Signed-off-by: Zachary Leaf <zachary.leaf@arm.com> Change-Id: I1569dd7948334fd2cc28523ccc6791a22dea8d32
2021-07-15misc: replace CLIB_PREFETCH with clib_prefetch_{load,store}Damjan Marion2-6/+6
Type: refactor Change-Id: Id10cbf52e8f2dd809080a228d8fa282308be84ac Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-07-13misc: remove vnet_all_api_h and vnet_msg_enumFilip Tehlar1-4/+0
These file are no longer needed Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I34f8e0b7e17d9e8c06dcd6c5ffe51aa273cdec07
2021-07-02ipsec: ADD/update IPSec documentationNeale Ranns1-0/+199
Type: docs Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ica576e13953a3c720a7c093af649d1dd380cc2c0
2021-06-30ipsec: Derive the TUNNEL_V6 flag from the configured address typesNeale Ranns2-1/+8
Type: improvement There's no need for the user to set the TUNNEL_V6 flag, it can be derived from the tunnel's address type. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I073073dc970b8a3f2b2645bc697fc00db1adbb47
2021-06-29ipsec: Fix setting the hi-sequence number for decryptNeale Ranns7-135/+229
Type: fix two problems; 1 - just because anti-reply is not enabled doesn't mean the high sequence number should not be used. - fix, there needs to be some means to detect a wrapped packet, so we use a window size of 2^30. 2 - The SA object was used as a scratch pad for the high-sequence number used during decryption. That means that once the batch has been processed the high-sequence number used is lost. This means it is not possible to distinguish this case: if (seq < IPSEC_SA_ANTI_REPLAY_WINDOW_LOWER_BOUND (tl)) { ... if (post_decrypt) { if (hi_seq_used == sa->seq_hi) /* the high sequence number used to succesfully decrypt this * packet is the same as the last-sequnence number of the SA. * that means this packet did not cause a wrap. * this packet is thus out of window and should be dropped */ return 1; else /* The packet decrypted with a different high sequence number * to the SA, that means it is the wrap packet and should be * accepted */ return 0; } - fix: don't use the SA as a scratch pad, use the 'packet_data' - the same place that is used as the scratch pad for the low sequence number. other consequences: - An SA doesn't have seq and last_seq, it has only seq; the sequence numnber of the last packet tx'd or rx'd. - there's 64bits of space available on the SA's first cache line. move the AES CTR mode IV there. - test the ESN/AR combinations to catch the bugs this fixes. This doubles the amount of tests, but without AR on they only run for 2 seconds. In the AR tests, the time taken to wait for packets that won't arrive is dropped from 1 to 0.2 seconds thus reducing the runtime of these tests from 10-15 to about 5 sceonds. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Iaac78905289a272dc01930d70decd8109cf5e7a5
2021-06-29ipsec: increment SPD policy counters for bypass and discard actions in ↵Zachary Leaf1-0/+20
ipsec4_input_node ipsec_spd_policy_counters are incremented only for matched inbound PROTECT actions (:273 and :370). BYPASS + DISCARD actions also have SPD policy counters that should be incremented on match. This fix increments the counters for inbound BYPASS and DISCARD actions. Type: fix Signed-off-by: Zachary Leaf <zachary.leaf@arm.com> Change-Id: Iac3c6d344be25ba5326e1ed45115ca299dee5f49
2021-06-28ipsec: Split the SA add_del API into an separate add and delNeale Ranns2-36/+98
Type: improvement the rationale being that the del only requires the SA's ID, so it's a bit mean to require the client to fill out all the other information as well. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ibbc20405e74d6a0e1a3797465ead5271f15888e4
2021-06-22ipsec: api cleanupFilip Tehlar2-81/+19
Use autogenerated code. Does not change API definitions. Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I0db7343e907524af5adb2f4771b45712927d5833
2021-06-15ipsec: fix length check when adding footer+icvBenoît Ganne1-1/+2
Length check must also take current_data into account. Type: fix Change-Id: I7a1b1752868892d40f59490d05452ef24565cca6 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-06-14linux-cp: Add tests for tun devicesNeale Ranns3-0/+46
Type: test Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Iec69d8624b15766ed65e7d09777819d2242dee17
2021-06-08ipsec: fix async crypto frame leakMatthew Smith2-54/+50
Type: fix If an async crypto frame is allocated during ESP encrypt/decrypt but a buffer/op is not subsequently added to the frame, the frame leaks. It is not submitted if the count of async ops is zero nor is it returned to the frame pool. This happens frequently if >= 2 worker threads are configured and a vector of buffers all have to be handed off to other threads. Wait until it is almost certain that the buffer will be added to the frame before allocating the frame to make it more unlikely that an allocated frame will not have any operations added to it. For encrypt this is sufficient to ressolve the leak. For decrypt there is still a chance that the buffer will fail to be added to the frame, so remove the counter of async ops and ensure that all frames that were allocated get either submitted or freed at the end. Change-Id: I4778c3265359b192d8a88ab9f8c53519d46285a2 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2021-06-04ipsec: fix crypto ops in esp decryptBenoît Ganne1-2/+7
When both chained and non-chained buffers are processed in the same vector, make sure the non-chained buffers are processed as non-chained crypto ops. Type: fix Change-Id: I19fc02c25a0d5e2e8a1342e2b88bbae3fe92862f Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-05-21ipsec: Default the IPSec interface MTU to 9000Neale Ranns1-0/+1
Type: fix The same value is used for other tunnel types. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I6593001918993d65f127cc9f716c95e932239842
2021-05-14vlib: pass node runtime to vlib_buffer_enqueue_to_thread()Damjan Marion1-1/+1
Mechanical change for patch following this one... Type: improvement Change-Id: Iee12f3a8851f35569e6c039494a94fc36e83d20f Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-05-06vlib: fix the offload flags sizeMohsin Kazmi1-1/+1
Type: fix Change-Id: I433fe3799975fe3ba00fa30226f6e8dae34e88fc Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-05-05vlib: move offload flags to 1st cacheline in vlib_buffer_tMohsin Kazmi1-1/+1
Type: improvement Some tests i.e. ipsec see performance regression when offload flags are moved to 2nd cacheline. This patch moves them back to 1st cacheline. Change-Id: I6ead45ff6d2c467b0d248f409e27c2ba31758741 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-04-20ipsec: remove WITH_LIBSSL macrosDamjan Marion2-125/+3
We don't use libssl anymore... At least not directly. Type: improvement Change-Id: I9a0fab6e3c576d945498ce46f030bd26c1a14d15 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-04-07crypto: fix ops flags in crypto sw schedulerBenoît Ganne1-0/+2
The crypto op flags must be reset to frame flags minus invalid values depending of the operation, instead of forcing them to specific values. Type: fix Change-Id: Ib02c2a738bbca6962394b3c03088d516d0da56a0 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-03-25stats: python vpp_stats rewrite to access stat segment directlyOle Troan1-5/+4
This module implement Python access to the VPP statistics segment. It accesses the data structures directly in shared memory. VPP uses optimistic locking, so data structures may change underneath us while we are reading. Data is copied out and it's important to spend as little time as possible "holding the lock". Counters are stored in VPP as a two dimensional array. Index by thread and index (typically sw_if_index). Simple counters count only packets, Combined counters count packets and octets. Counters can be accessed in either dimension. stat['/if/rx'] - returns 2D lists stat['/if/rx'][0] - returns counters for all interfaces for thread 0 stat['/if/rx'][0][1] - returns counter for interface 1 on thread 0 stat['/if/rx'][0][1]['packets'] - returns the packet counter for interface 1 on thread 0 stat['/if/rx'][:, 1] - returns the counters for interface 1 on all threads stat['/if/rx'][:, 1].packets() - returns the packet counters for interface 1 on all threads stat['/if/rx'][:, 1].sum_packets() - returns the sum of packet counters for interface 1 on all threads stat['/if/rx-miss'][:, 1].sum() - returns the sum of packet counters for interface 1 on all threads for simple counters Type: refactor Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I1fe7f7c7d11378d06be8276db5e1900ecdb8f515 Signed-off-by: Ole Troan <ot@cisco.com>
2021-03-15ipsec: allow inbound non-tunnel SA through CLIMohammed Hawari1-6/+0
Change-Id: Ia304488900bd9236ab4e7cc6f17ae029ee6f2c00 Type: fix Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
2021-03-14ip: extend punt CLI for exception packetsMohammed Hawari2-9/+11
Change-Id: I20e48a5ac8068eccb8d998346d35227c4802bb68 Signed-off-by: Mohammed Hawari <mohammed@hawari.fr> Type: feature
2021-03-05ipsec: Support async mode per-SANeale Ranns10-204/+231
Type: feature This feautre only applies to ESP not AH SAs. As well as the gobal switch for ayncs mode, allow individual SAs to be async. If global async is on, all SAs are async. If global async mode is off, then if then an SA can be individually set to async. This preserves the global switch behaviour. the stratergy in the esp encrypt.decrypt nodes is to separate the frame into, 1) sync buffers, 2) async buffers and 3) no-op buffers. Sync buffer will undergo a cyrpto/ath operation, no-op will not, they are dropped or handed-off. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ifc15b10b870b19413ad030ce7f92ed56275d6791
2021-03-05ipsec: Submit fuller async framesNeale Ranns3-125/+117
Type: improvement In the current scheme an async frame is submitted each time the crypto op changes. thus happens each time a different SA is used and thus potentially many times per-node. thi can lead to the submision of many partially filled frames. change the scheme to construct as many full frames as possible in the node and submit them all at the end. the frame owner ship is passed to the user so that there can be more than one open frame per-op at any given time. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ic2305581d7b5aa26133f52115e0cd28ba956ed55
2021-02-26ipsec: move the IPSec SA pool out of ipsec_mainNeale Ranns13-84/+76
Type: refactor this allows the ipsec_sa_get funtion to be moved from ipsec.h to ipsec_sa.h where it belongs. Also use ipsec_sa_get throughout the code base. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I2dce726c4f7052b5507dd8dcfead0ed5604357df
2021-02-25tests: Add tests for IPSec async mode using the crypto SW schedulerNeale Ranns1-1/+2
Type: test Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Iabc8f2b09ee10a82aacebd36acfe8648cf69b7d7
2021-02-25ipsec: ipsec.h tidy upNeale Ranns6-56/+86
Type: refactor - remove the extern declaration of the nodes. keep the use of them to the files that declare them - remove duplicate declaration of ipsec_set_async_mode - remove unsued ipsec_add_feature Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I6ce7bb4517b508a8f02b11f3bc819e1c5d539c02
2021-02-25ipsec: enable input features on tunnelsBrian Russell3-22/+75
Make the ipsec[46]-tun-input nodes siblings of device-input so that input features can be enabled on them. Register ipsec-tun for feature updates. When a feature is enabled on the device-input arc and the ifindex is an IPSec tunnel, change the end node of the arc for that ifindex to be the appropriate ESP decrypt node. Set a flag on the tunnel to indicate that the feature arc should be started for packets input on the tunnel. Test input policing on ESP IPSec tunnels. Type: improvement Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: I3b9f047e5e737f3ea4c58fc82cd3c15700b6f9f7
2021-02-15vlib: refactor checksum offload supportMohsin Kazmi1-35/+40
Type: refactor This patch refactors the offload flags in vlib_buffer_t. There are two main reasons behind this refactoring. First, offload flags are insufficient to represent outer and inner headers offloads. Second, room for these flags in first cacheline of vlib_buffer_t is also limited. This patch introduces a generic offload flag in first cacheline. And detailed offload flags in 2nd cacheline of the structure for performance optimization. Change-Id: Icc363a142fb9208ec7113ab5bbfc8230181f6004 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-02-12ipsec: Store thread-index in buffer meta-data during SA handoffNeale Ranns6-32/+19
Type: improvement negates the need to load the SA in the handoff node. don't prefetch the packet data, it's not needed. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I340472dc437f050cc1c3c11dfeb47ab09c609624
2021-02-10ipsec: Use the new tunnel API types to add flow label and TTL copyNeale Ranns13-259/+365
support Type: feature attmpet 2. this includes changes in ah_encrypt that don't use uninitialised memory when doing tunnel mode fixups. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ie3cb776f5c415c93b8a5ee22f22586fd0181110d
2021-02-09Revert "ipsec: Use the new tunnel API types to add flow label and TTL copy"Matthew Smith13-329/+230
This reverts commit c7eaa711f3e25580687df0618e9ca80d3dc85e5f. Reason for revert: The jenkins job named 'vpp-merge-master-ubuntu1804-x86_64' had 2 IPv6 AH tests fail after the change was merged. Those 2 tests also failed the next time that job ran after an unrelated change was merged. Change-Id: I0e2c3ee895114029066c82624e79807af575b6c0 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2021-02-08ipsec: Use the new tunnel API types to add flow label and TTL copyNeale Ranns13-230/+329
support Type: feature Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I6d4a9b187daa725d4b2cbb66e11616802d44d2d3