aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/ipsec
AgeCommit message (Collapse)AuthorFilesLines
2021-07-29ipsec: move startup config to common fileZachary Leaf3-51/+55
The ipsec startup.conf config currently exists in ipsec_tun.c. This is because currently the only ipsec{...} options are tunnel related. This patch moves the ipsec config to a common file (ipsec.c) for future extensibility/addition of non-tunnel related config options. Type: refactor Signed-off-by: Zachary Leaf <zachary.leaf@arm.com> Change-Id: I1569dd7948334fd2cc28523ccc6791a22dea8d32
2021-07-15misc: replace CLIB_PREFETCH with clib_prefetch_{load,store}Damjan Marion2-6/+6
Type: refactor Change-Id: Id10cbf52e8f2dd809080a228d8fa282308be84ac Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-07-13misc: remove vnet_all_api_h and vnet_msg_enumFilip Tehlar1-4/+0
These file are no longer needed Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I34f8e0b7e17d9e8c06dcd6c5ffe51aa273cdec07
2021-07-02ipsec: ADD/update IPSec documentationNeale Ranns1-0/+199
Type: docs Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ica576e13953a3c720a7c093af649d1dd380cc2c0
2021-06-30ipsec: Derive the TUNNEL_V6 flag from the configured address typesNeale Ranns2-1/+8
Type: improvement There's no need for the user to set the TUNNEL_V6 flag, it can be derived from the tunnel's address type. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I073073dc970b8a3f2b2645bc697fc00db1adbb47
2021-06-29ipsec: Fix setting the hi-sequence number for decryptNeale Ranns7-135/+229
Type: fix two problems; 1 - just because anti-reply is not enabled doesn't mean the high sequence number should not be used. - fix, there needs to be some means to detect a wrapped packet, so we use a window size of 2^30. 2 - The SA object was used as a scratch pad for the high-sequence number used during decryption. That means that once the batch has been processed the high-sequence number used is lost. This means it is not possible to distinguish this case: if (seq < IPSEC_SA_ANTI_REPLAY_WINDOW_LOWER_BOUND (tl)) { ... if (post_decrypt) { if (hi_seq_used == sa->seq_hi) /* the high sequence number used to succesfully decrypt this * packet is the same as the last-sequnence number of the SA. * that means this packet did not cause a wrap. * this packet is thus out of window and should be dropped */ return 1; else /* The packet decrypted with a different high sequence number * to the SA, that means it is the wrap packet and should be * accepted */ return 0; } - fix: don't use the SA as a scratch pad, use the 'packet_data' - the same place that is used as the scratch pad for the low sequence number. other consequences: - An SA doesn't have seq and last_seq, it has only seq; the sequence numnber of the last packet tx'd or rx'd. - there's 64bits of space available on the SA's first cache line. move the AES CTR mode IV there. - test the ESN/AR combinations to catch the bugs this fixes. This doubles the amount of tests, but without AR on they only run for 2 seconds. In the AR tests, the time taken to wait for packets that won't arrive is dropped from 1 to 0.2 seconds thus reducing the runtime of these tests from 10-15 to about 5 sceonds. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Iaac78905289a272dc01930d70decd8109cf5e7a5
2021-06-29ipsec: increment SPD policy counters for bypass and discard actions in ↵Zachary Leaf1-0/+20
ipsec4_input_node ipsec_spd_policy_counters are incremented only for matched inbound PROTECT actions (:273 and :370). BYPASS + DISCARD actions also have SPD policy counters that should be incremented on match. This fix increments the counters for inbound BYPASS and DISCARD actions. Type: fix Signed-off-by: Zachary Leaf <zachary.leaf@arm.com> Change-Id: Iac3c6d344be25ba5326e1ed45115ca299dee5f49
2021-06-28ipsec: Split the SA add_del API into an separate add and delNeale Ranns2-36/+98
Type: improvement the rationale being that the del only requires the SA's ID, so it's a bit mean to require the client to fill out all the other information as well. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ibbc20405e74d6a0e1a3797465ead5271f15888e4
2021-06-22ipsec: api cleanupFilip Tehlar2-81/+19
Use autogenerated code. Does not change API definitions. Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I0db7343e907524af5adb2f4771b45712927d5833
2021-06-15ipsec: fix length check when adding footer+icvBenoît Ganne1-1/+2
Length check must also take current_data into account. Type: fix Change-Id: I7a1b1752868892d40f59490d05452ef24565cca6 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-06-14linux-cp: Add tests for tun devicesNeale Ranns3-0/+46
Type: test Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Iec69d8624b15766ed65e7d09777819d2242dee17
2021-06-08ipsec: fix async crypto frame leakMatthew Smith2-54/+50
Type: fix If an async crypto frame is allocated during ESP encrypt/decrypt but a buffer/op is not subsequently added to the frame, the frame leaks. It is not submitted if the count of async ops is zero nor is it returned to the frame pool. This happens frequently if >= 2 worker threads are configured and a vector of buffers all have to be handed off to other threads. Wait until it is almost certain that the buffer will be added to the frame before allocating the frame to make it more unlikely that an allocated frame will not have any operations added to it. For encrypt this is sufficient to ressolve the leak. For decrypt there is still a chance that the buffer will fail to be added to the frame, so remove the counter of async ops and ensure that all frames that were allocated get either submitted or freed at the end. Change-Id: I4778c3265359b192d8a88ab9f8c53519d46285a2 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2021-06-04ipsec: fix crypto ops in esp decryptBenoît Ganne1-2/+7
When both chained and non-chained buffers are processed in the same vector, make sure the non-chained buffers are processed as non-chained crypto ops. Type: fix Change-Id: I19fc02c25a0d5e2e8a1342e2b88bbae3fe92862f Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-05-21ipsec: Default the IPSec interface MTU to 9000Neale Ranns1-0/+1
Type: fix The same value is used for other tunnel types. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I6593001918993d65f127cc9f716c95e932239842
2021-05-14vlib: pass node runtime to vlib_buffer_enqueue_to_thread()Damjan Marion1-1/+1
Mechanical change for patch following this one... Type: improvement Change-Id: Iee12f3a8851f35569e6c039494a94fc36e83d20f Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-05-06vlib: fix the offload flags sizeMohsin Kazmi1-1/+1
Type: fix Change-Id: I433fe3799975fe3ba00fa30226f6e8dae34e88fc Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-05-05vlib: move offload flags to 1st cacheline in vlib_buffer_tMohsin Kazmi1-1/+1
Type: improvement Some tests i.e. ipsec see performance regression when offload flags are moved to 2nd cacheline. This patch moves them back to 1st cacheline. Change-Id: I6ead45ff6d2c467b0d248f409e27c2ba31758741 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-04-20ipsec: remove WITH_LIBSSL macrosDamjan Marion2-125/+3
We don't use libssl anymore... At least not directly. Type: improvement Change-Id: I9a0fab6e3c576d945498ce46f030bd26c1a14d15 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-04-07crypto: fix ops flags in crypto sw schedulerBenoît Ganne1-0/+2
The crypto op flags must be reset to frame flags minus invalid values depending of the operation, instead of forcing them to specific values. Type: fix Change-Id: Ib02c2a738bbca6962394b3c03088d516d0da56a0 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-03-25stats: python vpp_stats rewrite to access stat segment directlyOle Troan1-5/+4
This module implement Python access to the VPP statistics segment. It accesses the data structures directly in shared memory. VPP uses optimistic locking, so data structures may change underneath us while we are reading. Data is copied out and it's important to spend as little time as possible "holding the lock". Counters are stored in VPP as a two dimensional array. Index by thread and index (typically sw_if_index). Simple counters count only packets, Combined counters count packets and octets. Counters can be accessed in either dimension. stat['/if/rx'] - returns 2D lists stat['/if/rx'][0] - returns counters for all interfaces for thread 0 stat['/if/rx'][0][1] - returns counter for interface 1 on thread 0 stat['/if/rx'][0][1]['packets'] - returns the packet counter for interface 1 on thread 0 stat['/if/rx'][:, 1] - returns the counters for interface 1 on all threads stat['/if/rx'][:, 1].packets() - returns the packet counters for interface 1 on all threads stat['/if/rx'][:, 1].sum_packets() - returns the sum of packet counters for interface 1 on all threads stat['/if/rx-miss'][:, 1].sum() - returns the sum of packet counters for interface 1 on all threads for simple counters Type: refactor Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I1fe7f7c7d11378d06be8276db5e1900ecdb8f515 Signed-off-by: Ole Troan <ot@cisco.com>
2021-03-15ipsec: allow inbound non-tunnel SA through CLIMohammed Hawari1-6/+0
Change-Id: Ia304488900bd9236ab4e7cc6f17ae029ee6f2c00 Type: fix Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
2021-03-14ip: extend punt CLI for exception packetsMohammed Hawari2-9/+11
Change-Id: I20e48a5ac8068eccb8d998346d35227c4802bb68 Signed-off-by: Mohammed Hawari <mohammed@hawari.fr> Type: feature
2021-03-05ipsec: Support async mode per-SANeale Ranns10-204/+231
Type: feature This feautre only applies to ESP not AH SAs. As well as the gobal switch for ayncs mode, allow individual SAs to be async. If global async is on, all SAs are async. If global async mode is off, then if then an SA can be individually set to async. This preserves the global switch behaviour. the stratergy in the esp encrypt.decrypt nodes is to separate the frame into, 1) sync buffers, 2) async buffers and 3) no-op buffers. Sync buffer will undergo a cyrpto/ath operation, no-op will not, they are dropped or handed-off. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ifc15b10b870b19413ad030ce7f92ed56275d6791
2021-03-05ipsec: Submit fuller async framesNeale Ranns3-125/+117
Type: improvement In the current scheme an async frame is submitted each time the crypto op changes. thus happens each time a different SA is used and thus potentially many times per-node. thi can lead to the submision of many partially filled frames. change the scheme to construct as many full frames as possible in the node and submit them all at the end. the frame owner ship is passed to the user so that there can be more than one open frame per-op at any given time. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ic2305581d7b5aa26133f52115e0cd28ba956ed55
2021-02-26ipsec: move the IPSec SA pool out of ipsec_mainNeale Ranns13-84/+76
Type: refactor this allows the ipsec_sa_get funtion to be moved from ipsec.h to ipsec_sa.h where it belongs. Also use ipsec_sa_get throughout the code base. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I2dce726c4f7052b5507dd8dcfead0ed5604357df
2021-02-25tests: Add tests for IPSec async mode using the crypto SW schedulerNeale Ranns1-1/+2
Type: test Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Iabc8f2b09ee10a82aacebd36acfe8648cf69b7d7
2021-02-25ipsec: ipsec.h tidy upNeale Ranns6-56/+86
Type: refactor - remove the extern declaration of the nodes. keep the use of them to the files that declare them - remove duplicate declaration of ipsec_set_async_mode - remove unsued ipsec_add_feature Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I6ce7bb4517b508a8f02b11f3bc819e1c5d539c02
2021-02-25ipsec: enable input features on tunnelsBrian Russell3-22/+75
Make the ipsec[46]-tun-input nodes siblings of device-input so that input features can be enabled on them. Register ipsec-tun for feature updates. When a feature is enabled on the device-input arc and the ifindex is an IPSec tunnel, change the end node of the arc for that ifindex to be the appropriate ESP decrypt node. Set a flag on the tunnel to indicate that the feature arc should be started for packets input on the tunnel. Test input policing on ESP IPSec tunnels. Type: improvement Signed-off-by: Brian Russell <brian@graphiant.com> Change-Id: I3b9f047e5e737f3ea4c58fc82cd3c15700b6f9f7
2021-02-15vlib: refactor checksum offload supportMohsin Kazmi1-35/+40
Type: refactor This patch refactors the offload flags in vlib_buffer_t. There are two main reasons behind this refactoring. First, offload flags are insufficient to represent outer and inner headers offloads. Second, room for these flags in first cacheline of vlib_buffer_t is also limited. This patch introduces a generic offload flag in first cacheline. And detailed offload flags in 2nd cacheline of the structure for performance optimization. Change-Id: Icc363a142fb9208ec7113ab5bbfc8230181f6004 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-02-12ipsec: Store thread-index in buffer meta-data during SA handoffNeale Ranns6-32/+19
Type: improvement negates the need to load the SA in the handoff node. don't prefetch the packet data, it's not needed. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I340472dc437f050cc1c3c11dfeb47ab09c609624
2021-02-10ipsec: Use the new tunnel API types to add flow label and TTL copyNeale Ranns13-259/+365
support Type: feature attmpet 2. this includes changes in ah_encrypt that don't use uninitialised memory when doing tunnel mode fixups. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ie3cb776f5c415c93b8a5ee22f22586fd0181110d
2021-02-09Revert "ipsec: Use the new tunnel API types to add flow label and TTL copy"Matthew Smith13-329/+230
This reverts commit c7eaa711f3e25580687df0618e9ca80d3dc85e5f. Reason for revert: The jenkins job named 'vpp-merge-master-ubuntu1804-x86_64' had 2 IPv6 AH tests fail after the change was merged. Those 2 tests also failed the next time that job ran after an unrelated change was merged. Change-Id: I0e2c3ee895114029066c82624e79807af575b6c0 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2021-02-08ipsec: Use the new tunnel API types to add flow label and TTL copyNeale Ranns13-230/+329
support Type: feature Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I6d4a9b187daa725d4b2cbb66e11616802d44d2d3
2021-02-08ipsec: Checking wrong DB for initialistationNeale Ranns1-17/+17
Type: fix Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I2325d311a6fd7343c7041dc516777f4db0029823
2021-02-08tunnel: support copying TTL and flow label from inner to outerNeale Ranns1-5/+4
Type: feature The added functionality is to support copying TTL and flow label from inner to outer. The .api was extened to support expressing this and also adding a common tunnel endpoint type. i find it best to make API changes in one patch so there are less versions of the API. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I755c1e3f4c475058792af39c1abeda92129efb76
2021-02-06ipsec: CLI improvement for udp port encapMohammed Hawari1-0/+5
Change-Id: I59f55db7209549ad43a1205470a2f5ea9ea8a1c7 Signed-off-by: Mohammed Hawari <mohammed@hawari.fr> Type: feature
2021-02-05ipsec: add support for AES CTRBenoît Ganne6-139/+182
Type: feature Change-Id: I9f7742cb12ce30592b0b022c314b71c81fa7223a Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-02-04ipsec: one thread index per-SANeale Ranns8-57/+36
Type: improvement AN SA is uni-drectional therefore it can be used only for encrypt or decrypt, not both. So it only needs one thread ID. free up some space on the 1st cacheline. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I21cb7cff70a763cbe2bffead860b574bc80b3136
2021-01-21ipsec: Honour IPSec SA table-ID over APINeale Ranns2-11/+9
Type: fix Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ib08fe356e4dc710dd60a96736c48b27129f06786
2021-01-21ipsec: Tunnelled packets are locally generatedNeale Ranns1-0/+1
Type: fix this means we 1) don't decrement TTL and (for v6) can fragment. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I0f718da7dcaba834ad495ae9242a9a58c9e7c184
2021-01-18ipsec: Support MPLS over IPSec[46] interfaceNeale Ranns7-101/+227
Type: feature Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I89dc3815eabfee135cd5b3c910dea5e2e2ef1333
2021-01-07ipsec: Deprecated the old IPsec Tunnel interfaceNeale Ranns5-594/+4
Type: fix it's been 2 releases since it was marked deprecated. Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I0eba7ed607826ed0d00e7d2d8f9b27d09e8e9a6e
2021-01-06ipsec: Mark the interface create reply deprecatedNeale Ranns1-0/+1
Type: fix I should have done this wehn i marked the request as deprecated. The reply also needs to be marked deprecated so the API compliance script can remove it along with the request. Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I8391257944b6cff7b32a01a479dd1dcab30cd33b
2021-01-05ipsec: ipsec cli nexthop erroryedg1-1/+1
Type: fix Signed-off-by: yedonggang <yedg@wangsu.com> Change-Id: Icc3681b591e6deb93c3ff1fda5f9471fa3c96cc6
2020-12-18ipsec: fixed esp_decrypt pkt len after icv movedPiotrX Kleski1-6/+11
Type: fix This change makes esp_move_icv() update pd->current_length if the first buffer's length is updated. In case that ICV is split over two buffers, esp_move_icv() copies ICV to last buffer, it also updates the before_last buffer's current_length. However, in esp_decrypt_post_crypto(), pd->current_lenght is used to update first buffer lenght, but pd is not updated in esp_move_icv() and the total pkt lenght ends up incorrect. This only happens in tunnel mode when ICV is split between 1st and 2nd buffers. Signed-off-by: PiotrX Kleski <piotrx.kleski@intel.com> Change-Id: Ic39d87454ec0d022c050775acb64c5c25ccf7f13
2020-12-14misc: move to new pool_foreach macrosDamjan Marion6-35/+35
Type: refactor Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-12-01ipsec: change predictionFan Zhang2-2/+2
Type: improvement This patch changes the prediction of the comparison between SA owner thread index and the current thread index. Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com> Change-Id: I48de0bb2c57dbb09cfab63925bf8dc96613d8bcf
2020-11-26gre: Move to new API generated types/messagesNeale Ranns1-1/+1
Type: improvement also clean up GRE includes across the code base. Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I90928b0da3927b7ca1a23683aa80d4b53bbf63fd
2020-11-25ipsec: A P2MP ipsec interface is NBMANeale Ranns1-0/+1
Type: fix Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I1922463683201215933e9f85b587d7c7123f3bfd
2020-11-09ipsec: fix unformat typesBenoît Ganne1-2/+2
ipsec_{crypto,integ}_alg_t are packed and smaller than u32. Callers are using those enums so unformat functions should too instead of u32 to not overflow the stack. Type: fix Change-Id: Ifc86366f1928ca6352f06f390a88ac64668289d5 Signed-off-by: Benoît Ganne <bganne@cisco.com>