summaryrefslogtreecommitdiffstats
path: root/src/vnet/l2/l2_api.c
AgeCommit message (Collapse)AuthorFilesLines
2022-05-19api: refactor api data storageDamjan Marion1-1/+1
single struct to hold all api handler, flags, etc. Provide functions to toggle flags instead of writing directly to internal data. Type: refactor Change-Id: I4730d7290e57489de8eda34a72211527e015b721 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-06-24l2: api cleanupFilip Tehlar1-83/+12
Use autogenerated code. Does not change API definitions. Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I7b84767e75d5f8310ec071036a5780fa4530f79f
2021-02-23l2: coverity woe in l2_api.cSteven Luong1-23/+20
Coverify complains deref_ptr before null check. deref_ptr: Directly dereferencing pointer reg. 1214 vl_reg = vl_api_client_index_to_registration (reg->client_index); 1215 ALWAYS_ASSERT (vl_reg != NULL); 1216 CID 216104 (#1 of 1): Dereference before null check (REVERSE_INULL) check_after_deref: Null-checking reg suggests that it may be null, but it has already been dereferenced on all paths leading to the check. 1217 if (reg && vl_api_can_send_msg (vl_reg)) I believe the check is for vl_reg instead of reg because vl_reg may be NULL after the call vl_api_client_index_to_registration. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Ic4eb2284e65c48396f20d5024a4241c80c70c886
2021-02-09l2: crash on l2_input_is_xconnectSteven Luong1-10/+8
Running vpp without any interface configured and then invoking the binary-api l2_xconnect_dump causes vpp to crash in l2_input_is_xconnect due to l2input_main.configs has no memory allocated to it, not even for the local interface which exists all the times. The reason that l2input_main.configs has no memory allocated to it was due to gerrit patch 29232 which took out a line in l2input_init /* Create the config vector */ vec_validate (mp->configs, 100); The fix is to iterate through l2input_main.configs for each interface in l2 to call l2_input_is_xconnect when dumping l2_xconnect interfaces. Type: fix Fixes: gerrit 29232 Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I8d9cba4b7eba4c2e0c60887c4fd57d5ec3b06d3b
2021-01-08l2: Separating scan-delay and learn-limit into a separate API from ↵Jerome Tollet1-19/+75
want_l2_macs_events Type: feature Signed-off-by: Jerome Tollet <jtollet@cisco.com> Change-Id: I6de6dae7da4ec1001e2811975a9b67acfc1a148c
2021-01-06l2: add per bridge domain learn limitJerome Tollet1-27/+69
Type: feature Signed-off-by: Jerome Tollet <jtollet@cisco.com> Change-Id: I57ed6699050445d9c9aec98eff3aab56735aca54 Signed-off-by: Jerome Tollet <jtollet@cisco.com>
2020-12-14misc: move to new pool_foreach macrosDamjan Marion1-6/+6
Type: refactor Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-11-25api: vat2 and json autogeneration for api messagesOle Troan1-3/+0
VAT2: A completely auto-generated replacement of VAT. Reads input message in JSON from stdin and outputs received messages in JSON. A VAT2 plugin is automatically built for a .api file. There no longer a need for a separate _test.c. Example: vat2 show_version {} { "_msgname": "show_version_reply", "retval": 0, "program": "vpe", "version": "21.01-rc0~411-gf6eb348a6", "build_date": "2020-11-19T09:49:25", "build_directory": "/vpp/autogen3" } vat2 sw_interface_dump '{"sw_if_index": -1, "name_filter_valid": 0, "name_filter": ""}' [{ "_msgname": "sw_interface_details", "sw_if_index": 0, "sup_sw_if_index": 0, "l2_address": "00:00:00:00:00:00", "flags": "Invalid ENUM", "type": "IF_API_TYPE_HARDWARE", "link_duplex": "LINK_DUPLEX_API_UNKNOWN", "link_speed": 0, "link_mtu": 0, "mtu": [0, 0, 0, 0], "sub_id": 0, "sub_number_of_tags": 0, "sub_outer_vlan_id": 0, "sub_inner_vlan_id": 0, "sub_if_flags": "Invalid ENUM", "vtr_op": 0, "vtr_push_dot1q": 0, "vtr_tag1": 0, "vtr_tag2": 0, "outer_tag": 0, "b_dmac": "00:00:00:00:00:00", "b_smac": "00:00:00:00:00:00", "b_vlanid": 0, "i_sid": 0, "interface_name": "local0", "interface_dev_type": "local", "tag": "" }] This is the first phase and vat2 is not integrated in packaging yet. Type: feature Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Ib45ddeafb180ea7da8c5dc274a9274d7a4edc876 Signed-off-by: Ole Troan <ot@cisco.com>
2020-10-08l2: input performanceNeale Ranns1-2/+2
Type: improvement - cache the values form the BD on the input config to avoid loading - avoid the short write long read on the sequence number - use vlib_buffer_enqueue_to_next Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I33442b9104b457e4c638d26e9ad3bc965687a0bc
2020-08-06misc: harmonize namesDave Barach1-1/+1
Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ibad744788e200ce012ad88ff59c2c34920742454
2020-03-09l2: API cleanupJakub Grajciar1-11/+28
Use consistent API types. Type: fix Change-Id: I7ac7cd00606101864fa3422e7b9ea2f1143665dd Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2020-02-18misc: fix coverity warningsDave Barach1-1/+1
Type: fix Ticket: VPP-1837 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I402b1b06db736b2a7a242ce70ffd409c7c0a4fc2
2019-12-17ip: Protocol Independent IP NeighborsNeale Ranns1-1/+166
Type: feature - ip-neighbour: generic neighbour handling; APIs, DBs, event handling, aging - arp: ARP protocol implementation - ip6-nd; IPv6 neighbor discovery implementation; separate ND, MLD, RA - ip6-link; manage link-local addresses - l2-arp-term; events separated from IP neighbours, since they are not the same. vnet retains just enough education to perform ND/ARP packet construction. arp and ip6-nd to be moved to plugins soon. Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-10api: multiple connections per processDave Barach1-1/+1
Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I2272521d6e69edcd385ef684af6dd4eea5eaa953
2019-06-19l2: BD ARP termination entry API updateNeale Ranns1-15/+29
Type: refactor Change-Id: I492b6e88acadf0ab0e4d7b1c0c5d1cab84c1726f Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-03mp_safe SW_INTERFACE_DUMP, SW_INTERFACE_DETAILS, SW_INTERFACE_TAG_ADD_DEL,Steven Luong1-0/+3
BRIDGE_DOMAIN_DUMP, CONTROL_PING, CONTROL_PING_REPLY, and show interface CLI Change-Id: I2927573b66bb5dd134b37ffb72af0e6676750917 Signed-off-by: Steven Luong <sluong@cisco.com> (cherry picked from commit 15c31921a628c5500cbed2ebc588d7ddbaa970a3)
2019-04-24l2: Add support for arp unicast forwardingMohsin Kazmi1-0/+4
Change-Id: I79fc55f36a9b83957f84619bdf8cef08acc8ec24 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-03-21BVI InterfaceNeale Ranns1-1/+35
a new dedicated BVI interface as opposed to [re]using a loopback. benefits: - removes ambiguity over the purpose of a loopback interface - TX node dedicated to BVI only functions. Change-Id: I749d6b38440d450ac5b909a28053c75ec9df946a Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-07L2 BD API to flush all IP-MAC entries in the specified BDJohn Lo1-0/+32
Implement API/CLI to clear IP-MAC tables used for ARP-termination in the specified bridge domain. The CLI to flush MAC IP tables for a BD is: set bridge-domain arp entry <bd-id> del-all The API added is bd_ip_mac_flush. Change-Id: I34ceb87c0f480c7102f6559312c24081ed485af8 Signed-off-by: John Lo <loj@cisco.com>
2019-01-03Fix used-before-set in vl_api_bridge_flags_t_handlerDave Barach1-1/+2
The aarch64 cross-compiler complains about this when building an optimized image. So we fix it... Change-Id: Ib2b2089c0534753d7d470311012fa0073ab27d1d Signed-off-by: Dave Barach <dave@barachs.net>
2018-12-18PAPI: Add MACAddress object wrapper for vl_api_mac_address_tOle Troan1-1/+1
Change the definition of vl_api_mac_address_t to an aliased type. Change-Id: I1434f316d0fad6a099592f39bceeb8faeaf1d134 Signed-off-by: Ole Troan <ot@cisco.com>
2018-11-06BD ARP entry use common API typesNeale Ranns1-6/+14
Change-Id: I29f20dbaf2c2d735faff297cee552ed648f6f61b Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-23c11 safe string handling supportDave Barach1-4/+4
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-09-26Modify return values of L2 bridge API handlersAlexander Chernavin1-0/+20
Change-Id: Ie6a6dde1fdc0e4fa8560682072a69876867a88d3 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2018-09-25L2 BD: introduce a BD interface on which to send UU packetsNeale Ranns1-9/+57
Change-Id: I21ad6b04c19c8735d057174b1f260a59f2812241 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-24Trivial: Clean up some typos.Paul Vinciguerra1-1/+1
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-09-19L2-fib-dump: send 1 or 0 rather than flag valueNeale Ranns1-3/+3
Change-Id: I487b3b480347f60ffe3af4029adfb22b6700cea7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-07L2-FIB: replace bit-fields with flagsNeale Ranns1-7/+9
Change-Id: Ic31da442a0e0477569d53b4a72627bbb25e93365 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-08-23coverity: l2 arp termination dumpMohsin Kazmi1-4/+5
This patch resolves the coverity warning. Change-Id: I3f5e664b442fa9bcafd28c67283596570dc1244d Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-08-17l2: arp termination dumpMohsin Kazmi1-0/+80
VPP-1368 Change-Id: I6373f76ba87184a91b517712eafb4ee1f5cea59e Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-07-23L2 EFP: byteswap sw_if_index, enable flag can be u8 on .apiNeale Ranns1-2/+5
Change-Id: Ib99d02e84e468726feae4c386733da405b298e4f Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-05-31Improve L2FIB delete entry handling and "show l2fib" CLI optionsJohn Lo1-1/+3
Improve deletion of L2FIB MAC entry using l2fib_add_del API. If sw_if_index param specified in th API is non-zero, check that its value match that of the MAC entry to proceed with deletion. Improve "show l2fib" CLI to allow display of all entries, learned entries only, or added ovia CLI/API entries only. For added entry, show "no" under the age column to indicate entry does not age. Change-Id: I0bd2582c2b6bac268e551e4f8ca6dab2be4400ad Signed-off-by: John Lo <loj@cisco.com>
2018-01-11api: remove transport specific code from handlersFlorin Coras1-19/+20
This does not update api client code. In other words, if the client assumes the transport is shmem based, this patch does not change that. Furthermore, code that checks queue size, for tail dropping, is not updated. Done for the following apis: Plugins - acl - gtpu - memif - nat - pppoe VNET - bfd - bier - tapv2 - vhost user - dhcp - flow - geneve - ip - punt - ipsec/ipsec-gre - l2 - l2tp - lisp-cp/one-cp - lisp-gpe - map - mpls - policer - session - span - udp - tap - vxlan/vxlan-gpe - interface VPP - api/api.c OAM - oam_api.c Stats - stats.c Change-Id: I0e33ecefb2bdab0295698c0add948068a5a83345 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-01-09api: refactor vlibmemoryFlorin Coras1-7/+6
- separate client/server code for both memory and socket apis - separate memory api code from generic vlib api code - move unix_shared_memory_fifo to svm and rename to svm_fifo_t - overall declutter Change-Id: I90cdd98ff74d0787d58825b914b0f1eafcfa4dc2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-11-10Break up vpe.apiNeale Ranns1-5/+173
- makes the VAPI generated file more consumable. - VOM build times improve. Change-Id: I838488930bd23a0d3818adfdffdbca3eead382df Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-10-31l2fib: MAC: Fix uint64 to u8 byte arrayMohsin Kazmi1-2/+4
As per proposal on the mailing list, this patch fixes the represntation of MAC address in VPP API calls for · L2fib_add_del · L2_fib_table_details Change-Id: I31e17efd1a6314cded69666e693cb8fc33158d02 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2017-09-07Support for bridge domain free text tagJerome Tollet1-0/+8
Change-Id: I9a75fdafd0c1d87b6f071fda5b77ff5f6b79deb7 Signed-off-by: Jerome Tollet <jtollet@cisco.com>
2017-09-03Improve L2FIB PDR/NDR performance (VPP-963)John Lo1-1/+1
1. Limit MAC entry update per l2-learn call to reduce update burst when wall clock advance to the the next minute so all MAC time stamps are behind current time needing update. 2. Optimize l2-learn node fast path code sequence. 3. Invalidate cache_key when update MAC entry. 4. Change L2 learn hit counter to L2 learn hit-update counter. 5. Increase L2FIB table memory size to 512MB to fit 4M entries 6. Set MAC learn limit at 4M entries Change-Id: I3075ee8fb59645a56850126bac2e3e6d341cef4d Signed-off-by: John Lo <loj@cisco.com>
2017-08-22Increase default MAC learn limit and check it in learn-update pathJohn Lo1-1/+4
1. Increase default MAC learn limit from 1M to 8M entries. 2. Check MAC learn limit in MAC learning update path. 3. Allow disable of want_l2_macs_events to set MAC learn limit 4. Other minor cleanups Change-Id: I62438440937b5fa455e16f4a2e4d910277753395 Signed-off-by: John Lo <loj@cisco.com>
2017-08-03Add support for API client to receive L2 MAC eventsJohn Lo1-6/+77
Added APIs want_l2_macs_events and l2_macs_event to allow an API client to receive notification events from VPP for MAC learned or aged in L2FIB. Only one API client is allowed for L2 MAC events. The want_l2_macs_events API allow caller to specify MAC learn limit, event scan delay and max number of MACs that can be included in a event message. These parameters should be choosen properly as to not have too many MAC events sent by VPP and overwhelm the API share memory. They can all be left as 0's so VPP will setup reasonable defaults which are: 1000 learn limit, 100 msec scan delay and 100 MACs per event message. If want_l2_macs_events is never called, VPP learning and aging should behave as before except that MAC entries provisioned by API or CLI will not be aged, even if it is not set as static_mac. These non static MACs, however, can be overwritten by MAC learning on a MAC move as a leared MAC. Only learned MACs are subject to aging. Change-Id: Ia3757a80cf8adb2811a089d2eafbd6439461285c Signed-off-by: John Lo <loj@cisco.com>
2017-06-27L2-LEARN:fix l2fib entry seq num not updated on hit (VPP-888)Eyal Bari1-17/+11
fixed instability in l2bd_multi_instnce test - sometimes failing with extra packets captured it appears l2-learn was not updating hit entries but rather a copy of them. if the ager did not have a chance to run before the test was running the learning cycle - entries were not updated with the packet's seq num - causing packets to flood when hitting the stale seq_num in l2-fwd - hence the extra packets fixed handling of filter entries revert workaround for instability in test Change-Id: I16d918e6310a5bf40bad5b7335b2140c2867cb71 Signed-off-by: Eyal Bari <ebari@cisco.com> (cherry picked from commit 25ff2ea3a31e422094f6d91eab46222a29a77c4b)
2017-05-20API: Cleaning up message naming that does not follow the conventionsOle Troan1-36/+25
is_address_reachable - Disabled so deleted cli_request - Renamed to cli vnet_summary_stats_reply - Renamed to vnet_get_summary_stats_reply bridge_domain_sw_if_details - Deleted, incorporated in main message l2_fib_table_entry - Renamed to l2_fib_table_details Change-Id: I93b7e8769a3ba7b4989b3c270270f575f386464f Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Marek Gradzki <mgradzki@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com>
2017-05-15L2BD/API:fix bd dump to ignore unknown bd_idEyal Bari1-19/+20
Change-Id: I417dfeba902ca8c3a080773942d4d2ce4335a9c1 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-05-08L2FIB:CLI/API to flush all non-static entriesEyal Bari1-5/+13
added CLI l2fib flush-mac all added API l2fib_flush_all flushes all non static l2fib entries on all valid BDs Change-Id: Ic963c88f4bed56308c03ab43106033132a0e87be Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-05-02Prevent Bridge Domain operations on BD 0.Jon Loeliger1-1/+18
The default bridge domain, 0, is created automatically with static features. It should be modified by neither the CLI nor the API. So add tests for, and reject any operation on BD 0. The new API error message BD_NOT_MODIFIABLE is returned in such cases. Change-Id: Iaf3dd80c4f43cf41689ca55756a0a3525420cd12 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-04-24BD:unify bridge domain creation codeEyal Bari1-48/+15
Change-Id: I29082e7a0c556069180a157e55b3698cf8cd38c7 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-04-05L2FIB:add l2fib_flush_bd l2fib_flush_int apisEyal Bari1-0/+38
Change-Id: I0a6989c6963956f3e60e8c50835c57845fccef8c Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-04-04BD/API:add bridge_domain_set_mac_age apiEyal Bari1-8/+25
Change-Id: Ic2d33b31ba88f6d9602a22439865637d98cf4a33 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-03-02Clean up binary api message handler registration issuesDave Barach1-22/+0
Removed a fair number of "BUG" message handlers, due to conflicts with actual message handlers in api_format.c. Vpp itself had no business receiving certain messages, up to the point where we started building in relevant code from vpp_api_test. Eliminated all but one duplicate registration complaint. That one needs attention from the vxlan team since the duplicated handlers have diverged. Change-Id: Iafce5429d2f906270643b4ea5f0130e20beb4d1d Signed-off-by: Dave Barach <dave@barachs.net>
2017-01-27API refactoring : l2 (add)Pavel Kotucek1-1/+82
Change-Id: I693a73ba9a5e3b0cb5d2a6c5d363f671e19c1f24 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>