summaryrefslogtreecommitdiffstats
path: root/src/vnet/l2/l2_input.h
AgeCommit message (Collapse)AuthorFilesLines
2019-09-20classify: remove includes from classifier header fileDamjan Marion1-0/+1
Type: refactor Change-Id: I6f0af1c3078edce1c1b29a8b99c4a232d7084d33 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-07-02gbp: add anonymous l3-out external interfacesBenoît Ganne1-0/+1
So far, GBP l3-out packets classification & policy relied on programmed EP. All traffic to/from l3-out must go through a known EP. This patch introduces a new feature where l3-out next-hops are only known by their subnets (l3-out prefixes). As there are no longer known EPs to program, an interface must be configured as external anonymous l3-out. Packets classification & policy on this interface will rely on the external subnets programmed in the BD VRF. Note that contrary to all other interfaces in a GBP BD, external anonymous l3-out interfaces have BD L2 learning turned on and rely on ARP/ND. Type: feature Change-Id: Ieedb29dff4e967d08c4301e82d06bff450a63e5f Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-04-24l2: Add support for arp unicast forwardingMohsin Kazmi1-0/+8
Change-Id: I79fc55f36a9b83957f84619bdf8cef08acc8ec24 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-03-06GBP: use sclass in the DP for policyNeale Ranns1-1/+0
Change-Id: I154e18f22ec7708127b8ade98e80546ab1dcd05b Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-22GBP: Sclass to src-epg conversionsNeale Ranns1-0/+1
Change-Id: Ica88268fd6a6ee01da7e9219bb4e81f22ed2fd4b Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-29GBP: l3-out subnetsNeale Ranns1-0/+1
Change-Id: Id4a20066fc5be716c61a497dfcb4d00dc1dbb28d Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-13L2 feautre bitmaps output verbose/non-verbose modeNeale Ranns1-1/+1
Change-Id: I15ff191ee8724a3354c074db590472db05e0652e Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-07GBP Endpoint LearningNeale Ranns1-1/+2
Learning GBP endpoints over vxlan-gbp tunnels Change-Id: I1db9fda5a16802d9ad8b4efd4e475614f3b21502 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-10-24L2-input/output: use feature enum type in flag update functionNeale Ranns1-1/+3
Change-Id: I1f58f441c65fbca101bee2e864bfa6ae2306b475 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-15vnet: create L2 feature arc infrastructureAndrew Yourtchenko1-0/+1
This commit adds two new nodes in the L2 datapath in input and output direction respectively. These nodes fork the traffic into three feature arcs: ip4, ip6 and nonip, which later join to continue the usual L2 processing. The vnet_l2_feature_enable_disable() function with the same signature as vnet_feature_enable_disable() takes care of enabling the L2 datapath feature bits as needed, when the features are enabled/disabled. Thus, L2 features may use the similar plumbing as the L3 features enjoy. Change-Id: I76877b3a92d794c492bff1622bb26acba05705b2 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-09-25L2 BD: introduce a BD interface on which to send UU packetsNeale Ranns1-1/+3
Change-Id: I21ad6b04c19c8735d057174b1f260a59f2812241 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-24Trivial: Clean up some typos.Paul Vinciguerra1-2/+2
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-09-08L2 BVI/FIB: Update L2 FIB table when BVI's MAC changesNeale Ranns1-0/+3
also some moving of l2 headers to reduce dependencies Change-Id: I7a700a411a91451ef13fd65f9c90de2432b793bb Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-08-22l2:remove unused members of input, output configsEyal Bari1-11/+6
reorder structs for less padding Change-Id: Id05123f5bac870e1c585b3aa2177d9e3a6f8d70b Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-04-24Support QOS_SOURCE_IP recording from L2 input node.Igor Mikhailov (imichail)1-0/+1
Some scenarios not involving ip[4,6]-input paths might benefit from IP header QOS fields recorded and applied. An example: L2 (overlay) traffic being encapsulated by VPP in VXLAN and transmitted on another (underlay) interface might want the QOS information carried over in the outer IP header. Change-Id: I4d9462c47ae6ba97680edb1e53340b17cfd7845b Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2018-04-13GBP V2Neale Ranns1-0/+3
update the GBP plugin to implement the full NAT feature set of opflex agent Change-Id: Ic06a039c889445ed0b9087fa1f292634192b0f8d Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-12-20L2 EmulationNeale Ranns1-0/+1
L2 Emulation is a feautre that is applied to L2 ports to 'extract' IP packets from the L2 path and inject them into the L3 path (i.e. into the appropriate ip[4|6]_input node). L3 routes in the table_id for that interface should then be configured as DVR routes, therefore the forwarded packet has the L2 header preserved and togehter the L3 routed system behaves like an L2 bridge. Change-Id: I8effd7e2f4c67ee277b73c7bc79aa3e5a3e34d03 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-07-31CLI:add l2 input/outut to "sh int features"Eyal Bari1-0/+2
Change-Id: If608bbc7f4c8b0d5c3a237098a20279e407c82d3 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-07-24SPAN:add l2 mirrorEyal Bari1-2/+3
added span feature nodes for l2-input / l2-output Change-Id: Ib6e0ce60d0811901b6edd70209e6a4c4a35cd8ff Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-07-11L2INPUT:fix features mask cailculationEyal Bari1-6/+10
Change-Id: I84cea7530b01302a0adeef95b4924f54dc2e41ec Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-06-19L2FWD:fix seq_num overwritten + validate l2fib entries when forwardingEyal Bari1-3/+0
l2_classify memeber table_index was overlaid over l2.l2fib_seq_num which over written when table_index gets initialized in l2_input_classify solved by overlaying both table_index and opaque_index as only one is used seperated l2fib seq num from l2_input configs for better handling of theoretical ABA issue where an entry for a deleted interface is considered valid by the ager because a different interface with same sw_if_index and seq_num was created before the ager got a chance to delete Change-Id: I7b0eeded971627406f1c80834d7e02c0ebe62136 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-05-03L2FIB:flush interface learned macs on downEyal Bari1-0/+11
Change-Id: I80a723f55fcf2ecc3209a35e8297c88b45b1abfb Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-04-04BD/API:add bridge_domain_set_mac_age apiEyal Bari1-0/+5
Change-Id: Ic2d33b31ba88f6d9602a22439865637d98cf4a33 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-03-28Implement MAC Flush for BD or Interface from the L2FIBJohn Lo1-0/+3
Allow non-static MACs in the L2FIB which is associated with an interface or a bridge domain (BD) be flushed. MAC flush are initiated automatically when an interface is removed from a BD or when a BD is deleted. MAC flush can also be invoked manually via the following CLI: l2fib mac-flush interface <if-name> l2fib mac-flush bridge-domain <bd-id> Change-Id: Ie33243622834810a765f48ebcd22bdb8e8fc87a4 Signed-off-by: John Lo <loj@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+266
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>