aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/l2
AgeCommit message (Collapse)AuthorFilesLines
2017-11-10Break up vpe.apiNeale Ranns2-5/+273
- makes the VAPI generated file more consumable. - VOM build times improve. Change-Id: I838488930bd23a0d3818adfdffdbca3eead382df Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-11-10Further fix to SHG handling for ARP/ICMPv6 from BVI in a BDJohn Lo1-6/+25
For ARP/ICMPv6 packets received from a BVI in a BD, allow flood to all remote VTEPs via VXLAN tunnels irrespective of SHG check for ARP request or ICMPv6 neighbor solicitation packets only. All other packets types will flood normally as per SHG check. Change-Id: I17b1cef9015e363fb684c2b6506ed6c4efe70bba Signed-off-by: John Lo <loj@cisco.com> (cherry picked from commit 5b99133cff1ff0eb9043dd8bd3648b0b3aafa47e)
2017-11-08Fix SHG handling for ARP/ICMPv6 received from BVI in a BDJohn Lo1-0/+8
This change makes sure ARP/ICMPv6 brodcast packets received from the BVI of a BD can be flooded to all remote VTEPs via its VXLAN tunnels irrespective of SHG setting. Similar processing was done for unicast packets already and needs to be extpanded to ARP and ICMPv6 broadcast packets. Change-Id: I26ac43ecdbc81a769f742a583a156506f7e70d49 Signed-off-by: John Lo <loj@cisco.com> (cherry picked from commit c97b4aca0db8d84b17ceb03a14ab44346a2b3466)
2017-11-03silence l2fib_init() invalid read of size 2 found by address-sanitizerGabriel Ganne1-1/+6
l2fib_make_key() casts and reads the input 6-Bytes mac_address as u64, therefore if the mac_address is declared with 6 Bytes only, address-sanitizer rightly triggers an invalid read on the last two Bytes. However, l2fib_make_key() does a 16 bits shift to discard those 2 values, therefore, this invalid read is of no consequence (and so can be silenced safely). Change-Id: I38646fe60073093d25cdf135185d4c96136d55d0 Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2017-10-31Fix "l2fib add" CLI to allow adding of filter MAC entriesJohn Lo1-25/+17
When adding a filter MAC entry, the default sw_if_index of -1 was incorrectly validated and rejected. Change-Id: Id7f122b6269ea7c299a4335b05b748afaf01383c Signed-off-by: John Lo <loj@cisco.com>
2017-10-31l2fib: MAC: Fix uint64 to u8 byte arrayMohsin Kazmi5-49/+44
As per proposal on the mailing list, this patch fixes the represntation of MAC address in VPP API calls for · L2fib_add_del · L2_fib_table_details Change-Id: I31e17efd1a6314cded69666e693cb8fc33158d02 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2017-10-24Update L2 header offset after VLAN tag rewriteNeale Ranns1-1/+3
Change-Id: I5c1df59bce7c9654101672a12981e5bd62e9adc4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-24Add extern to *_main global variable declarations in header files.Dave Wallace3-2/+4
- Global variables declared in header files without the use of the 'extern' keword will result in multiple instances of the variable to be created by the compiler -- one for each different source file in which the the header file is included. This results in wasted memory allocated in the BSS segments as well as potentially introducing bugs in the application. Change-Id: I6ef1790b60a0bd9dd3994f8510723decf258b0cc Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-10-09vppapigen: support per-file (major,minor,patch) version stampsDave Barach1-0/+2
Add one of these statements to foo.api: vl_api_version 1.2.3 to generate a version tuple stanza in foo.api.h: /****** Version tuple *****/ vl_api_version_tuple(foo, 1, 2, 3) Change-Id: Ic514439e4677999daa8463a94f948f76b132ff15 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Ole Troan <ot@cisco.com>
2017-10-03Update L2FIB entry timestamp only if BD aging enabled (VPP-1002)John Lo2-3/+5
Change L2 learning path so it update stale timestamp in MAC entry only if aging is enabled on the BD for the MAC entry. Change-Id: I7babe986ceef3c030d8ef9185076c42b405f7b0f Signed-off-by: John Lo <loj@cisco.com>
2017-10-03Repair vlib API socket serverDave Barach1-5/+7
- Teach vpp_api_test to send/receive API messages over sockets - Add memfd-based shared memory - Add api messages to create memfd-based shared memory segments - vpp_api_test supports both socket and shared memory segment connections - vpp_api_test pivot from socket to shared memory API messaging - add socket client support to libvlibclient.so - dead client reaper sends ping messages, container-friendly - dead client reaper falls back to kill (<pid>, 0) live checking if e.g. a python app goes silent for tens of seconds - handle ping messages in python client support code - teach show api ring about pairwise shared-memory segments - fix ip probing of already resolved destinations (VPP-998) We'll need this work to implement proper host-stack client isolation Change-Id: Ic23b65f75c854d0393d9a2e9d6b122a9551be769 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-02L2-FIB:add mac learn events testEyal Bari1-56/+49
fixes an issue where events were not sent if BD doesn't enable mac aging Change-Id: Iddc53cb5c45e560633e6c5cff2731dccfc70ad5b Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-09-15Update of free text tag patch for BDJerome Tollet3-4/+7
Change-Id: Ia886ff2bfa2cf33ffbaa35ec89494d4300ec2769 Signed-off-by: Jerome Tollet <jtollet@cisco.com>
2017-09-07Support for bridge domain free text tagJerome Tollet4-2/+66
Change-Id: I9a75fdafd0c1d87b6f071fda5b77ff5f6b79deb7 Signed-off-by: Jerome Tollet <jtollet@cisco.com>
2017-09-03Improve L2FIB PDR/NDR performance (VPP-963)John Lo4-18/+30
1. Limit MAC entry update per l2-learn call to reduce update burst when wall clock advance to the the next minute so all MAC time stamps are behind current time needing update. 2. Optimize l2-learn node fast path code sequence. 3. Invalidate cache_key when update MAC entry. 4. Change L2 learn hit counter to L2 learn hit-update counter. 5. Increase L2FIB table memory size to 512MB to fit 4M entries 6. Set MAC learn limit at 4M entries Change-Id: I3075ee8fb59645a56850126bac2e3e6d341cef4d Signed-off-by: John Lo <loj@cisco.com>
2017-08-22Increase default MAC learn limit and check it in learn-update pathJohn Lo5-4/+8
1. Increase default MAC learn limit from 1M to 8M entries. 2. Check MAC learn limit in MAC learning update path. 3. Allow disable of want_l2_macs_events to set MAC learn limit 4. Other minor cleanups Change-Id: I62438440937b5fa455e16f4a2e4d910277753395 Signed-off-by: John Lo <loj@cisco.com>
2017-08-03Add support for API client to receive L2 MAC eventsJohn Lo8-160/+494
Added APIs want_l2_macs_events and l2_macs_event to allow an API client to receive notification events from VPP for MAC learned or aged in L2FIB. Only one API client is allowed for L2 MAC events. The want_l2_macs_events API allow caller to specify MAC learn limit, event scan delay and max number of MACs that can be included in a event message. These parameters should be choosen properly as to not have too many MAC events sent by VPP and overwhelm the API share memory. They can all be left as 0's so VPP will setup reasonable defaults which are: 1000 learn limit, 100 msec scan delay and 100 MACs per event message. If want_l2_macs_events is never called, VPP learning and aging should behave as before except that MAC entries provisioned by API or CLI will not be aged, even if it is not set as static_mac. These non static MACs, however, can be overwritten by MAC learning on a MAC move as a leared MAC. Only learned MACs are subject to aging. Change-Id: Ia3757a80cf8adb2811a089d2eafbd6439461285c Signed-off-by: John Lo <loj@cisco.com>
2017-07-31CLI:add l2 input/outut to "sh int features"Eyal Bari5-1/+51
Change-Id: If608bbc7f4c8b0d5c3a237098a20279e407c82d3 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-07-24SPAN:add l2 mirrorEyal Bari3-10/+16
added span feature nodes for l2-input / l2-output Change-Id: Ib6e0ce60d0811901b6edd70209e6a4c4a35cd8ff Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-07-23Improve L2 Input/Output Feature Infrastructure and UsageJohn Lo13-319/+154
Simplify L2 output feature infra to unify with L2 input feature infra using the newly improved feature bitmap mechanism. Updated all L2 features to use the more efficient infra functions. Change-Id: If8f463826b0af0717129befe92a27ea8cfc40449 Signed-off-by: John Lo <loj@cisco.com>
2017-07-20L2FWD:move vec_validate out of access functionEyal Bari2-2/+9
Change-Id: Id9737b6aa2b6fe3032f4627dfdbd2ea728cc3fb1 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-07-19Add a bihash prefetchable bucket-level cacheDave Barach1-4/+4
According to Maciek, the easiest way to leverage the csit "performance trend" job is to actually merge the patch once verified. Manual testing indicates that the patch improves l2 path performance. Other use-cases are TBD. It's possible that we'll need to back out the patch depending on what happens. Change-Id: Ic0a0363de35ef9be953ad7709c57c3936b73fd5a Signed-off-by: Dave Barach <dave@barachs.net>
2017-07-14Introduce l{2,3,4}_hdr_offset fields in the buffer metadataDamjan Marion1-1/+1
To save space in the first cacheline following is changed: - total_length_not_including_first_buffer moved to the 2nd cacheline. This field is used only when VLIB_BUFFER_TOTAL_LENGTH_VALID and VLIB_BUFFER_NEXT_PRESENT are both set. - free_list_index is now stored in 4bits inside flags, which allows up to 16 free lists. In case we need more we can store index in the 2nd cachelin Change-Id: Ic8521350819391af470d31d3fa1013e67ecb7681 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-07-13Fix crash with worker threads on 4K VXLAN/BD setup (VPP-907)John Lo7-167/+49
Cleanup mapping of interface output node for the l2-output node when interface is configured to L2 or L3 modes. The mapping is now always done in the main thread as part of API/CLI processing, instead of initiate mapping in the forwarding path which can be in the worker threads. Change-Id: Ia789493e7d9f5c76d68edfaf34db43f3e3f53506 Signed-off-by: John Lo <loj@cisco.com> (cherry picked from commit bea5ebf205e0bec922bf26c6c1a6a9392b4cad67)
2017-07-11L2INPUT:fix features mask cailculationEyal Bari1-6/+10
Change-Id: I84cea7530b01302a0adeef95b4924f54dc2e41ec Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-06-27L2-LEARN:fix l2fib entry seq num not updated on hit (VPP-888)Eyal Bari5-87/+64
fixed instability in l2bd_multi_instnce test - sometimes failing with extra packets captured it appears l2-learn was not updating hit entries but rather a copy of them. if the ager did not have a chance to run before the test was running the learning cycle - entries were not updated with the packet's seq num - causing packets to flood when hitting the stale seq_num in l2-fwd - hence the extra packets fixed handling of filter entries revert workaround for instability in test Change-Id: I16d918e6310a5bf40bad5b7335b2140c2867cb71 Signed-off-by: Eyal Bari <ebari@cisco.com> (cherry picked from commit 25ff2ea3a31e422094f6d91eab46222a29a77c4b)
2017-06-19L2FWD:fix seq_num overwritten + validate l2fib entries when forwardingEyal Bari7-53/+87
l2_classify memeber table_index was overlaid over l2.l2fib_seq_num which over written when table_index gets initialized in l2_input_classify solved by overlaying both table_index and opaque_index as only one is used seperated l2fib seq num from l2_input configs for better handling of theoretical ABA issue where an entry for a deleted interface is considered valid by the ager because a different interface with same sw_if_index and seq_num was created before the ager got a chance to delete Change-Id: I7b0eeded971627406f1c80834d7e02c0ebe62136 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-06-14ETH:fix l2_len/vlan count mismatch for > 2 tagsEyal Bari2-15/+3
l2_len was not updated for the third tag as the ethernet node retracts by the vlan count after parse_header (using ethernet_buffer_header_size) it ends up pointing before the ethernet header + some minor cleanups Change-Id: I4ccaedd33928912e5d837376f146503b27071741 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-06-12L2FIB:fix crash in show with deleted subif entriesEyal Bari1-4/+7
after deleting a sub interface it's l2fib entries are left with a dangling sw_if_index (while waiting for the ager to delete them). changed "show l2fib" to reflect that state with "Deleted" as the interface name. added sleep in test_l2_fib as a workaround for packets still passing after flush will investigate... Change-Id: Id998d7d3c6a073ef5005c5f3009e1cfb7febf7db Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-05-20API: Cleaning up message naming that does not follow the conventionsOle Troan2-52/+41
is_address_reachable - Disabled so deleted cli_request - Renamed to cli vnet_summary_stats_reply - Renamed to vnet_get_summary_stats_reply bridge_domain_sw_if_details - Deleted, incorporated in main message l2_fib_table_entry - Renamed to l2_fib_table_details Change-Id: I93b7e8769a3ba7b4989b3c270270f575f386464f Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Marek Gradzki <mgradzki@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com>
2017-05-19Enforce Bridge Domain ID range to match 24-bit VNI rangeJohn Lo3-7/+20
Enforce bridge domain ID range to allow a maximum value of 16M which matches the range of 24-bit VNI used for virtual overlay network ID. Fix "show bridge-domain" output to allow full 16M BD ID range to be displayed using 8-digit spaces. Change-Id: I80d9c76ea7c001bcccd3c19df1f3e55d2970f01c Signed-off-by: John Lo <loj@cisco.com>
2017-05-15L2BD/API:fix bd dump to ignore unknown bd_idEyal Bari1-19/+20
Change-Id: I417dfeba902ca8c3a080773942d4d2ce4335a9c1 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-05-08L2FIB:CLI/API to flush all non-static entriesEyal Bari6-86/+156
added CLI l2fib flush-mac all added API l2fib_flush_all flushes all non static l2fib entries on all valid BDs Change-Id: Ic963c88f4bed56308c03ab43106033132a0e87be Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-05-05Fix L2FIB learn counter and memory cleanup of mac_by_ip6 hash tableJohn Lo2-5/+16
Fix global_learn_count to be incremented or decremented by add and deletion of non-static MAC entries from L2FIB only. Without this fix, the counter may reach the threshold of 1M and stop MAC leanring even though number of MAC entries in L2FIB is less than the threshold. Cleanup indirect hash key memory used by mac_by_ip6 hash table on BD deletion. Change-Id: I13986c4e6304c7956122520dd3f83d6bb6e65a15 Signed-off-by: John Lo <loj@cisco.com>
2017-05-03L2FIB:flush interface learned macs on downEyal Bari4-39/+42
Change-Id: I80a723f55fcf2ecc3209a35e8297c88b45b1abfb Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-05-02Prevent Bridge Domain operations on BD 0.Jon Loeliger2-2/+62
The default bridge domain, 0, is created automatically with static features. It should be modified by neither the CLI nor the API. So add tests for, and reject any operation on BD 0. The new API error message BD_NOT_MODIFIABLE is returned in such cases. Change-Id: Iaf3dd80c4f43cf41689ca55756a0a3525420cd12 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-04-28Fix memory leak on deletion of BD (bridge domain)John Lo1-3/+9
On BD deletion, free memory used by members vector and mac_by_ip4 and mac_by_ip6 hash tables. Change-Id: Ied467e79bb6636fd8788bdeddee660c66391bb7e Signed-off-by: John Lo <loj@cisco.com>
2017-04-25"autoreply" flag: autogenerate standard xxx_reply_t messagesDave Barach1-88/+8
Change-Id: I72298aaae7d172082ece3a8edea4217c11b28d79 Signed-off-by: Dave Barach <dave@barachs.net>
2017-04-24BD:unify bridge domain creation codeEyal Bari3-106/+86
Change-Id: I29082e7a0c556069180a157e55b3698cf8cd38c7 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-04-06VPP-686: create bridge-domainChoonho Son1-2/+4
- update default flags - add missing flag learn Change-Id: I50a1a001848769836468838775b59d3414d27710 Signed-off-by: Choonho Son <choonho.son@gmail.com>
2017-04-06Use thread local storage for thread indexDamjan Marion3-11/+11
This patch deprecates stack-based thread identification, Also removes requirement that thread stacks are adjacent. Finally, possibly annoying for some folks, it renames all occurences of cpu_index and cpu_number with thread index. Using word "cpu" is misleading here as thread can be migrated ti different CPU, and also it is not related to linux cpu index. Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-05L2FIB:add l2fib_flush_bd l2fib_flush_int apisEyal Bari2-0/+82
Change-Id: I0a6989c6963956f3e60e8c50835c57845fccef8c Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-04-04BD/API:add bridge_domain_set_mac_age apiEyal Bari4-10/+55
Change-Id: Ic2d33b31ba88f6d9602a22439865637d98cf4a33 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-04-01CLI: create/delete bridge-domainChoonho Son2-1/+201
Added new CLI command - create bridge-domain <bridge-domain-id> - create bridge-domain <bridge-domain-id> del Change-Id: I1a7d632c7daa3c37b7f424a184e8fabd489518e9 Signed-off-by: Choonho Son <choonho.son@gmail.com>
2017-03-28Implement MAC Flush for BD or Interface from the L2FIBJohn Lo8-46/+253
Allow non-static MACs in the L2FIB which is associated with an interface or a bridge domain (BD) be flushed. MAC flush are initiated automatically when an interface is removed from a BD or when a BD is deleted. MAC flush can also be invoked manually via the following CLI: l2fib mac-flush interface <if-name> l2fib mac-flush bridge-domain <bd-id> Change-Id: Ie33243622834810a765f48ebcd22bdb8e8fc87a4 Signed-off-by: John Lo <loj@cisco.com>
2017-03-16vlib: make runtime_data thread-localDamjan Marion2-0/+31
Change-Id: I4aa3e7e42fb81211de1aed07dc7befee87a1e18b Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-07fix gcc 5.4 warning: argument to 'sizeof' in 'memcpy' call is the same ↵Gabriel Ganne2-10/+8
expression as the destination warning translates as an invalid write : sizeof(u8* b_dmac) == 8 != sizeof(eth_hdr->dst_address) == 6 ~/vpp/build-data/../src/vnet/l2/l2_vtr.c: In function 'l2pbb_get': ~/vpp/build-data/../src/vnet/l2/l2_vtr.c:734:63: error: argument to 'sizeof' in 'memcpy' call is the same expression as the destination; did you mean to provide an explicit length? [-Werror=sizeof-pointer-memaccess] ~/vpp/build-data/../src/vnet/l2/l2_vtr.c:736:63: error: argument to 'sizeof' in 'memcpy' call is the same expression as the destination; did you mean to provide an explicit length? [-Werror=sizeof-pointer-memaccess] update l2pbb_get to take an ethernet header instead of two u8* pointers for source and dest mac addresses. Change-Id: Ifcf1319a9e22614d57682f940e10f0420dc6fb8c Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2017-03-03VPP-651: Ensure sw_if_index to node mapping for L2 output path is only done ↵Andrew Yourtchenko3-3/+17
via l2output_main.next_nodes Before this commit, several output features that happen to be the last in the list of features to be executed, send the packets directly to <interfaceName>-output. To do this, they use l2_output_dispatch, which builds a list of sw_if_index to next index mappings. When interfaces are deleted and the new interfaces are created, these mappings become stale, and cause the packets being sent to wrong interface output nodes. This patch (thanks John Lo for the brilliant idea!) adds a feature node "output", whose sole purpose is dispatching the packets to the correct interface output nodes. To do that, it uses the l2output_main.next_nodes, which is already taken care of for the case of the sw_if_index reuse, so this makes the dependent features all work correctly. Since this changes the packet path, for the features that were always the last ones it has triggered a side problem of the output feat_next_node_index not being properly initalized. These two users are l2-output-classify node and the output nodes belonging to the acl-plugin. For the first one the less invasive fix is just to initialize that field. For the acl-plugin nodes, rewrite the affected part of the code to use feat_bitmap_get_next_node_index since this is essentially what the conditional in l2_output_dispatch does, and fix the compiler warnings generated. This fix was first made in stable/1701 under commit e7dcee4027854b0ad076101471afdfff67eb9011. Change-Id: I32e876ab1e1d498cf0854c19c6318dcf59a93805 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-03-02Clean up binary api message handler registration issuesDave Barach1-22/+0
Removed a fair number of "BUG" message handlers, due to conflicts with actual message handlers in api_format.c. Vpp itself had no business receiving certain messages, up to the point where we started building in relevant code from vpp_api_test. Eliminated all but one duplicate registration complaint. That one needs attention from the vxlan team since the duplicated handlers have diverged. Change-Id: Iafce5429d2f906270643b4ea5f0130e20beb4d1d Signed-off-by: Dave Barach <dave@barachs.net>
2017-03-02bridge domain: fix members reordered when removingEyal Bari1-1/+1
since adding support for multicast vxlan flooding (flood class tunnel master) correct flood functionality depends on the order of the memebers vector solved by using vec_delete instead of vec_del1 which swaps members before deleting the last element Change-Id: I234f218d49172b4142c567db9699a5cb274e4a66 Signed-off-by: Eyal Bari <ebari@cisco.com>