aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/l2
AgeCommit message (Collapse)AuthorFilesLines
2021-06-24l2: api cleanupFilip Tehlar3-92/+19
Use autogenerated code. Does not change API definitions. Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I7b84767e75d5f8310ec071036a5780fa4530f79f
2021-06-09l2: fix vrrp prefix mac comparisonTianyu Li1-2/+2
VRRP prefix length is 5 bytes, doesn't make sense to compare with 6 bytes mac address Type: fix Signed-off-by: Tianyu Li <tianyu.li@arm.com> Change-Id: I70a9c9ca769f34a81cd568f9e6b9a3538e6ec710
2021-03-05l2: coverity woe in l2_rw_mod_entrySteven Luong1-3/+0
Coverity complains that the statement if (!e) return -1; is never true and is logically dead code in the subject function. It is right. e is assigned in both the if and else statementes immediately above and can never be null. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Ic2d0e76eff696ee689a68a07913876dcecf5c647
2021-02-23l2: coverity woe in l2_api.cSteven Luong1-23/+20
Coverify complains deref_ptr before null check. deref_ptr: Directly dereferencing pointer reg. 1214 vl_reg = vl_api_client_index_to_registration (reg->client_index); 1215 ALWAYS_ASSERT (vl_reg != NULL); 1216 CID 216104 (#1 of 1): Dereference before null check (REVERSE_INULL) check_after_deref: Null-checking reg suggests that it may be null, but it has already been dereferenced on all paths leading to the check. 1217 if (reg && vl_api_can_send_msg (vl_reg)) I believe the check is for vl_reg instead of reg because vl_reg may be NULL after the call vl_api_client_index_to_registration. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Ic4eb2284e65c48396f20d5024a4241c80c70c886
2021-02-09l2: crash on l2_input_is_xconnectSteven Luong1-10/+8
Running vpp without any interface configured and then invoking the binary-api l2_xconnect_dump causes vpp to crash in l2_input_is_xconnect due to l2input_main.configs has no memory allocated to it, not even for the local interface which exists all the times. The reason that l2input_main.configs has no memory allocated to it was due to gerrit patch 29232 which took out a line in l2input_init /* Create the config vector */ vec_validate (mp->configs, 100); The fix is to iterate through l2input_main.configs for each interface in l2 to call l2_input_is_xconnect when dumping l2_xconnect interfaces. Type: fix Fixes: gerrit 29232 Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I8d9cba4b7eba4c2e0c60887c4fd57d5ec3b06d3b
2021-02-04linux-cp: Linux Interface Mirroring for Control Plane IntegrationNeale Ranns1-2/+4
Type: feature please see FEATURE.yaml for details. Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Matthew Smith <mgsmith@netgate.com> Signed-off-by: Jon Loeliger <jdl@netgate.com> Signed-off-by: Pim van Pelt <pim@ipng.nl> Change-Id: I04a45c15c0838906aa787e06660fa29f39f755fa
2021-01-08l2: Separating scan-delay and learn-limit into a separate API from ↵Jerome Tollet3-20/+136
want_l2_macs_events Type: feature Signed-off-by: Jerome Tollet <jtollet@cisco.com> Change-Id: I6de6dae7da4ec1001e2811975a9b67acfc1a148c
2021-01-06l2: add per bridge domain learn limitJerome Tollet7-60/+290
Type: feature Signed-off-by: Jerome Tollet <jtollet@cisco.com> Change-Id: I57ed6699050445d9c9aec98eff3aab56735aca54 Signed-off-by: Jerome Tollet <jtollet@cisco.com>
2020-12-14misc: refactor clib_bitmap_foreach macroDamjan Marion1-2/+2
Type: refactor Change-Id: I077110e1a422722e20aa546a6f3224c06ab0cde5 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-12-14misc: move to new pool_foreach macrosDamjan Marion4-12/+12
Type: refactor Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-11-25api: vat2 and json autogeneration for api messagesOle Troan2-4/+1
VAT2: A completely auto-generated replacement of VAT. Reads input message in JSON from stdin and outputs received messages in JSON. A VAT2 plugin is automatically built for a .api file. There no longer a need for a separate _test.c. Example: vat2 show_version {} { "_msgname": "show_version_reply", "retval": 0, "program": "vpe", "version": "21.01-rc0~411-gf6eb348a6", "build_date": "2020-11-19T09:49:25", "build_directory": "/vpp/autogen3" } vat2 sw_interface_dump '{"sw_if_index": -1, "name_filter_valid": 0, "name_filter": ""}' [{ "_msgname": "sw_interface_details", "sw_if_index": 0, "sup_sw_if_index": 0, "l2_address": "00:00:00:00:00:00", "flags": "Invalid ENUM", "type": "IF_API_TYPE_HARDWARE", "link_duplex": "LINK_DUPLEX_API_UNKNOWN", "link_speed": 0, "link_mtu": 0, "mtu": [0, 0, 0, 0], "sub_id": 0, "sub_number_of_tags": 0, "sub_outer_vlan_id": 0, "sub_inner_vlan_id": 0, "sub_if_flags": "Invalid ENUM", "vtr_op": 0, "vtr_push_dot1q": 0, "vtr_tag1": 0, "vtr_tag2": 0, "outer_tag": 0, "b_dmac": "00:00:00:00:00:00", "b_smac": "00:00:00:00:00:00", "b_vlanid": 0, "i_sid": 0, "interface_name": "local0", "interface_dev_type": "local", "tag": "" }] This is the first phase and vat2 is not integrated in packaging yet. Type: feature Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Ib45ddeafb180ea7da8c5dc274a9274d7a4edc876 Signed-off-by: Ole Troan <ot@cisco.com>
2020-11-13ethernet: mac must support 64-bits loadsBenoît Ganne1-2/+2
ethernet dataplane loads MAC addresses as 64-bits loads for efficiency. We must make sure it is valid, especially for the vector of secondary MACs. Type: fix Change-Id: I851e319b8a973c154e85ff9f05f3b8e385939788 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-10-28misc: Break the big IP header files to improve compile timeNeale Ranns3-4/+10
Type: refactor Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: Id1801519638a9b97175847d7ed58824fb83433d6
2020-10-19ip: Move the IP6 fib into ip6_[m]fib.cNeale Ranns1-0/+1
Type: improvement reduce the compile time by moving the bihash includes out of ip[46].h Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I6b9216e10aff1013071f9238b3e1ebbdd205bd80
2020-10-12l2: mark l2 fib uninitialized after clearingMatthew Smith1-0/+2
Type: fix After clearing the l2fib with 'vppctl clear l2fib', a SEGV occurs the next time a MAC address is learned. In l2fib_clear_table(), the l2fib bihash is freed and then l2fib_table_init() is called to reinitialize it. l2fib_table_init() will not do anything if l2fib_main.mac_table_initialized is set to 1. Reset the value of l2fib_main.mac_table_initialized to 0 before calling l2fib_table_init(). Change-Id: I87f1a3f9a46c951f36c1c0a5ab795b0ec08c81a8 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-10-08l2: Fix compile error on unused next_indexNeale Ranns1-3/+0
Type: fix Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ifc6b4c15f6055df4f403e9cd633e31f061a6d2da
2020-10-08l2: input performanceNeale Ranns11-469/+693
Type: improvement - cache the values form the BD on the input config to avoid loading - avoid the short write long read on the sequence number - use vlib_buffer_enqueue_to_next Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I33442b9104b457e4c638d26e9ad3bc965687a0bc
2020-10-07misc: Purge unused pg includesNeale Ranns10-10/+0
Type: style Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I26a19e42076e031ec5399d5ca05cb49fd6fbe1cd
2020-09-14l2: allocate l2fib only when neededDamjan Marion4-10/+90
Currently l2 fib allocates 512MB hash table unconditionally on startup. This patch postpones table creation up to the point where first interface is put into l2 mode or mac entry is added. In addition it reduces default table size to 128MB and increases number of buckets 4 times. This default setting should be enough to keep 1M mac entries. Also, new startup.conf section is added which allows user to change memory and bucket size. .i.e: l2fib { table-size 512M num-buckets 524288 } Type: improvement Change-Id: I2a29209aa3545181f0087544c97a54d8157b6ec5 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-09-11l2: fix null deref in l2_to_bvi()Matthew Smith1-1/+1
Type: fix Static analysis identified a possible null pointer dereference. It was introduced by a recent patch which expanded the DMAC comparison on inbound packets on a BVI interface to include any secondary MAC addresses which were added to an interface. Check if the pointer is null before dereferencing. Change-Id: Ic2afe2b062eda32977e05bf3f98d82c1fe64620c Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-09-09l2: check secondary macs on BVI interfaceMatthew Smith1-2/+35
Type: fix VRRP cannot be used on a BVI interface currently because packets sent to the virtual mac address of the VR fail the destination mac check in l2_to_bvi(). Apparently people want to use VRRP on BVI interfaces, so update the check in l2_to_bvi() so that it will check any secondary mac addresses which have been added to the ethernet interface if the destination mac address does not match the primary mac address for the interface. An equivalent check is already done in ethernet_input_inline() for L3 interfaces which are in promiscuous mode. Change-Id: I7c5bf624dafda8744fea236c704e8e17e5f53b35 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-08-06misc: harmonize namesDave Barach2-2/+2
Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ibad744788e200ce012ad88ff59c2c34920742454
2020-06-27l2: performance enhancement in l2inputZhiyong Yang1-80/+69
Short Load/Stores combined with prefetching in the beginning of the loop place too much pressure on AGUs and memory accesses. The patch interleaves load/store operations with computational operations to alleviate the pain point. vlib_get_buffers is also leveraged. Redefine u8 dst_and_src[12] instead of dst[6] and src[6] in struct l2input_trace_t in order to merge two copys into one. Type: improvement Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com> Change-Id: I7d3df7732c476069235e3019c68f0f53bca9637e
2020-05-16l2: L2/L3 mode swicth cleanup and l2-patch fixJohn Lo2-19/+9
Cleanup L2/L3 mode switch to not redirect to/from ethernet-input node as it is no longer necessary. L2 patch should use sw_if_index for device feature enable/disable. Type: fix Signed-off-by: John Lo <loj@cisco.com> Change-Id: I0f24161d027b07c188fd1e05276146f94c075710
2020-04-30l2: fix coverity warnings in l2_fwd.cDave Barach1-9/+9
Type: fix Ticket: VPP-1837 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ibf468970b56fc6bf8d5fb6ba491dd3e727464fc0
2020-04-28tests: move defaults from defaultmapping to .api filesPaul Vinciguerra1-1/+1
facilitates use of papi beyond the tests. Type: improvement Change-Id: I3d502d9130b81a7fb65ee69bb06fe55802b28a27 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-04-27l2: merge two clib_memcpy_fast into oneZhiyong Yang1-11/+16
Merge two memcpy into one by swapping src and dst address in l2fwd_trace_t. Type: improvement Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com> Change-Id: I71c5ecad0b453a434b1cb292ef03d88a760255c8
2020-04-21vppinfra: bihash improvementsDave Barach1-6/+7
Template instances can allocate BIHASH_KVP_PER_PAGE data records tangent to the bucket, to remove a dependent read / prefetch. Template instances can ask for immediate memory allocation, to avoid several branches in the lookup path. Clean up l2 fib, gpb plugin codes: use clib_bihash_get_bucket(...) Use hugepages for bihash allocation arenas Type: improvement Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Damjan Marion <damarion@cisco.com> Change-Id: I92fc11bc58e48d84e2d61f44580916dd1c56361c
2020-04-07l2: handle complete clone fail in l2_floodDave Barach1-2/+8
vlib_buffer_clone(...) may not manage to produce any buffer clones at all. vlib_buffer_clone_256 should not smash the original buffer reference count if no clones are produced. Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I14d9d53637a220485c7a0036cfc75a4149b264ea
2020-03-09l2: API cleanupJakub Grajciar3-88/+121
Use consistent API types. Type: fix Change-Id: I7ac7cd00606101864fa3422e7b9ea2f1143665dd Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2020-02-24l2: remove unused types and includes form feature arc codeNeale Ranns2-26/+0
Type: improvement Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ia441c069afe79ccd6428159df944d4c1d10a992d
2020-02-18misc: fix coverity warningsDave Barach1-1/+1
Type: fix Ticket: VPP-1837 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I402b1b06db736b2a7a242ce70ffd409c7c0a4fc2
2020-01-14classify: Reduce the include dependencies on vnet_classify.hNeale Ranns1-0/+1
Type: refactor currently vnet_classify.h is included in ip.h where it's not required. Change-Id: Id55682637601655aa2edda681536a979c8e323bd Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-01-10docs: Edit FEATURE.yaml files so they can be publishedJohn DeNisco1-3/+3
Type: docs Signed-off-by: John DeNisco <jdenisco@cisco.com> Change-Id: I7280e5c5ad10a66c0787a5282291a2ef000bff5f
2020-01-08l2: fix MAC learn counter update on adding MAC entryJohn Lo1-1/+1
Type: fix Signed-off-by: John Lo <loj@cisco.com> Change-Id: I711432f589ee4a4527cf795526d3b4031999f71d
2020-01-06l2: Update FEATURE.yamlJohn Lo1-0/+3
Type: docs Signed-off-by: John Lo <loj@cisco.com> Change-Id: Ib34440c137f24621002ce9463515c632c472a293
2020-01-04l2: Add FEATURE.yamlJohn Lo1-0/+21
Type: docs Signed-off-by: John Lo <loj@cisco.com> Change-Id: Icd22f2ec7076bb11d6ac7e7d147bd58dc5ad1527
2019-12-17l2: l2_patch_main should not be staticVratko Polak1-1/+5
Without understanding what is going on, a pattern from l2_fwd.c is applied to l2_patch.c file. Type: fix Fixes: d770cfc96257f9bd9e0c96c8ebe50e4531dc1bc5 Ticket: VPP-1799 Change-Id: Ia97d448f9d1846549f57ea69044ae15fa39bb942 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2019-12-17l2: fix l2input_feat_names overflowBenoît Ganne1-1/+1
Type: fix Change-Id: I59549b3aab5a0ccfe7db02757f78528e028121a5 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-12-17ip: Protocol Independent IP NeighborsNeale Ranns5-3/+741
Type: feature - ip-neighbour: generic neighbour handling; APIs, DBs, event handling, aging - arp: ARP protocol implementation - ip6-nd; IPv6 neighbor discovery implementation; separate ND, MLD, RA - ip6-link; manage link-local addresses - l2-arp-term; events separated from IP neighbours, since they are not the same. vnet retains just enough education to perform ND/ARP packet construction. arp and ip6-nd to be moved to plugins soon. Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-16vppinfra: bihash walk cb typedef and continue/stop controlsNeale Ranns1-4/+8
Type: feature Change-Id: I28f7a658be3f3beec9ea32635b60d1d3a10d9b06 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-12-10api: multiple connections per processDave Barach1-1/+1
Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I2272521d6e69edcd385ef684af6dd4eea5eaa953
2019-11-27misc: add address sanitizer heap instrumentationBenoît Ganne1-8/+3
Introduce AddressSanitizer support: https://github.com/google/sanitizers/ This starts with heap instrumentation. vlib_buffer, bihash and stack instrumentation should follow. Type: feature Change-Id: I7f20e235b2f79db72efd0e756f22c75f717a9884 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-11-26fib: reduce save_rewrite_length to u8Klement Sekera1-1/+1
This is a preparation step for migrating NAT to use SVR (shallow virtual reassembly) to conserve space in vnet_buffer. Since max rewrite length is currently pre-data size (128), u8 is sufficient to hold that value. Type: refactor Change-Id: I5374bb396e178245b870cb0bbf1370d2a54230bc Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-11-12interface: Allow VLAN tag-rewrite on non-sub-interfaces too.Jon Loeliger1-35/+0
This fix was first made in commit fdea5c6a00b74971dbb1b7ec4e25839a871006ca but was subsequently lost in commit 053204ab039d34a990ff0e14c32ce3b294fcce0e Added unit test for setting VTR on a non-sub-interface to help ensure no future regressions of this ability. Type: fix Change-Id: I71ce2684fb72383741455829ae2d397ea2e95eae Signed-off-by: Jon Loeliger <jdl@netgate.com>
2019-10-30l2: fix typo in doxygenPaul Vinciguerra1-2/+2
Type: style Change-Id: I286280fffa6ab5d3e15986911a4ccc35efbf41c3 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-10-22vppinfra: add vec_set_len()Benoît Ganne1-1/+2
l2-flood and bier nodes reset vector length without updating it to its effective size. Introduce a helper to do it (this allows ASAN to keep track of the new vector size). Type: refactor Change-Id: I2d652550c440f0553a2b49c3ee3d37b49ebc16c3 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-09-26classify: use vector code even when data is not alignedDamjan Marion1-61/+19
Type: feature Change-Id: I8f5f4841965beb13ebc8c2a37ce0dc331c920109 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-09-20classify: remove includes from classifier header fileDamjan Marion2-0/+2
Type: refactor Change-Id: I6f0af1c3078edce1c1b29a8b99c4a232d7084d33 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-09-02ipsec ip tcp l2: multiarch nodes cannot be declared as staticDamjan Marion3-6/+6
Credits to ray.kinsella@intel.com who spotted the issue and identified root cause. Type: fix Change-Id: I4afe74c47769484309f6aebca2de56ad32c8041f Signed-off-by: Damjan Marion <damarion@cisco.com>