Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: refactor
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: Id1801519638a9b97175847d7ed58824fb83433d6
|
|
Type: improvement
reduce the compile time by moving the bihash includes out of ip[46].h
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I6b9216e10aff1013071f9238b3e1ebbdd205bd80
|
|
Type: fix
After clearing the l2fib with 'vppctl clear l2fib', a SEGV occurs the
next time a MAC address is learned.
In l2fib_clear_table(), the l2fib bihash is freed and then
l2fib_table_init() is called to reinitialize it. l2fib_table_init()
will not do anything if l2fib_main.mac_table_initialized is set to 1.
Reset the value of l2fib_main.mac_table_initialized to 0 before
calling l2fib_table_init().
Change-Id: I87f1a3f9a46c951f36c1c0a5ab795b0ec08c81a8
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ifc6b4c15f6055df4f403e9cd633e31f061a6d2da
|
|
Type: improvement
- cache the values form the BD on the input config to avoid loading
- avoid the short write long read on the sequence number
- use vlib_buffer_enqueue_to_next
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I33442b9104b457e4c638d26e9ad3bc965687a0bc
|
|
Type: style
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I26a19e42076e031ec5399d5ca05cb49fd6fbe1cd
|
|
Currently l2 fib allocates 512MB hash table unconditionally on startup.
This patch postpones table creation up to the point where first
interface is put into l2 mode or mac entry is added.
In addition it reduces default table size to 128MB and increases number
of buckets 4 times. This default setting should be enough to keep 1M mac
entries.
Also, new startup.conf section is added which allows user to change memory
and bucket size. .i.e:
l2fib {
table-size 512M
num-buckets 524288
}
Type: improvement
Change-Id: I2a29209aa3545181f0087544c97a54d8157b6ec5
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Static analysis identified a possible null pointer dereference. It
was introduced by a recent patch which expanded the DMAC comparison
on inbound packets on a BVI interface to include any secondary MAC
addresses which were added to an interface.
Check if the pointer is null before dereferencing.
Change-Id: Ic2afe2b062eda32977e05bf3f98d82c1fe64620c
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
VRRP cannot be used on a BVI interface currently because packets sent
to the virtual mac address of the VR fail the destination mac check in
l2_to_bvi().
Apparently people want to use VRRP on BVI interfaces, so update the
check in l2_to_bvi() so that it will check any secondary mac addresses
which have been added to the ethernet interface if the destination mac
address does not match the primary mac address for the interface.
An equivalent check is already done in ethernet_input_inline() for L3
interfaces which are in promiscuous mode.
Change-Id: I7c5bf624dafda8744fea236c704e8e17e5f53b35
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ibad744788e200ce012ad88ff59c2c34920742454
|
|
Short Load/Stores combined with prefetching in the beginning of the loop
place too much pressure on AGUs and memory accesses.
The patch interleaves load/store operations with computational operations
to alleviate the pain point.
vlib_get_buffers is also leveraged.
Redefine u8 dst_and_src[12] instead of dst[6] and src[6] in struct
l2input_trace_t in order to merge two copys into one.
Type: improvement
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Change-Id: I7d3df7732c476069235e3019c68f0f53bca9637e
|
|
Cleanup L2/L3 mode switch to not redirect to/from ethernet-input node
as it is no longer necessary.
L2 patch should use sw_if_index for device feature enable/disable.
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I0f24161d027b07c188fd1e05276146f94c075710
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ibf468970b56fc6bf8d5fb6ba491dd3e727464fc0
|
|
facilitates use of papi beyond the tests.
Type: improvement
Change-Id: I3d502d9130b81a7fb65ee69bb06fe55802b28a27
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Merge two memcpy into one by swapping src and dst address in
l2fwd_trace_t.
Type: improvement
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Change-Id: I71c5ecad0b453a434b1cb292ef03d88a760255c8
|
|
Template instances can allocate BIHASH_KVP_PER_PAGE data records
tangent to the bucket, to remove a dependent read / prefetch.
Template instances can ask for immediate memory allocation, to avoid
several branches in the lookup path.
Clean up l2 fib, gpb plugin codes: use clib_bihash_get_bucket(...)
Use hugepages for bihash allocation arenas
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Damjan Marion <damarion@cisco.com>
Change-Id: I92fc11bc58e48d84e2d61f44580916dd1c56361c
|
|
vlib_buffer_clone(...) may not manage to produce any buffer clones at
all.
vlib_buffer_clone_256 should not smash the original buffer reference
count if no clones are produced.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I14d9d53637a220485c7a0036cfc75a4149b264ea
|
|
Use consistent API types.
Type: fix
Change-Id: I7ac7cd00606101864fa3422e7b9ea2f1143665dd
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Type: improvement
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ia441c069afe79ccd6428159df944d4c1d10a992d
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I402b1b06db736b2a7a242ce70ffd409c7c0a4fc2
|
|
Type: refactor
currently vnet_classify.h is included in ip.h where it's not required.
Change-Id: Id55682637601655aa2edda681536a979c8e323bd
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: docs
Signed-off-by: John DeNisco <jdenisco@cisco.com>
Change-Id: I7280e5c5ad10a66c0787a5282291a2ef000bff5f
|
|
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I711432f589ee4a4527cf795526d3b4031999f71d
|
|
Type: docs
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: Ib34440c137f24621002ce9463515c632c472a293
|
|
Type: docs
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: Icd22f2ec7076bb11d6ac7e7d147bd58dc5ad1527
|
|
Without understanding what is going on,
a pattern from l2_fwd.c is applied to l2_patch.c file.
Type: fix
Fixes: d770cfc96257f9bd9e0c96c8ebe50e4531dc1bc5
Ticket: VPP-1799
Change-Id: Ia97d448f9d1846549f57ea69044ae15fa39bb942
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Type: fix
Change-Id: I59549b3aab5a0ccfe7db02757f78528e028121a5
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
- ip-neighbour: generic neighbour handling; APIs, DBs, event handling,
aging
- arp: ARP protocol implementation
- ip6-nd; IPv6 neighbor discovery implementation; separate ND,
MLD, RA
- ip6-link; manage link-local addresses
- l2-arp-term; events separated from IP neighbours, since they are not
the same.
vnet retains just enough education to perform ND/ARP packet
construction.
arp and ip6-nd to be moved to plugins soon.
Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Change-Id: I28f7a658be3f3beec9ea32635b60d1d3a10d9b06
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I2272521d6e69edcd385ef684af6dd4eea5eaa953
|
|
Introduce AddressSanitizer support: https://github.com/google/sanitizers/
This starts with heap instrumentation. vlib_buffer, bihash and stack
instrumentation should follow.
Type: feature
Change-Id: I7f20e235b2f79db72efd0e756f22c75f717a9884
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
This is a preparation step for migrating NAT to use SVR (shallow virtual
reassembly) to conserve space in vnet_buffer. Since max rewrite length
is currently pre-data size (128), u8 is sufficient to hold that value.
Type: refactor
Change-Id: I5374bb396e178245b870cb0bbf1370d2a54230bc
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
This fix was first made in
commit fdea5c6a00b74971dbb1b7ec4e25839a871006ca
but was subsequently lost in
commit 053204ab039d34a990ff0e14c32ce3b294fcce0e
Added unit test for setting VTR on a non-sub-interface to
help ensure no future regressions of this ability.
Type: fix
Change-Id: I71ce2684fb72383741455829ae2d397ea2e95eae
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Type: style
Change-Id: I286280fffa6ab5d3e15986911a4ccc35efbf41c3
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
l2-flood and bier nodes reset vector length without updating it to its
effective size. Introduce a helper to do it (this allows ASAN to keep
track of the new vector size).
Type: refactor
Change-Id: I2d652550c440f0553a2b49c3ee3d37b49ebc16c3
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Change-Id: I8f5f4841965beb13ebc8c2a37ce0dc331c920109
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Change-Id: I6f0af1c3078edce1c1b29a8b99c4a232d7084d33
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Credits to ray.kinsella@intel.com who spotted the issue and identified
root cause.
Type: fix
Change-Id: I4afe74c47769484309f6aebca2de56ad32c8041f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
vppapigen has remapped legacy to typedefs behind the scenes
for some time now.
- update .api files to use new style typedefs.
- issue error on 'typeonly define' in .api files
- remove unneeded macros redefining vl_noop_handler
Type: refactor
Change-Id: I7a8c4a6dafacee6a131f95cd0e9b03a8c60dea8b
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Since vlib_buffer_copy() and vlib_buffer_clone() both preserve
VLIB_BUFFER_IS_TRACED bit in flags field, it should also copy
trace_handle which would add minimal overhead. Thus, callers of
these functions do not have to call vlib_buffer_copy_trace_flags()
to copy trace_handle.
Type: refactor
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: Iff6a3f81660dd62b36a2966033eb380305340310
|
|
Multiple API message handlers call vnet_get_sup_hw_interface(...)
without checking the inbound sw_if_index. This can cause a
pool_elt_at_index ASSERT in a debug image, and major disorder in a
production image.
Given that a number of places are coded as follows, add an
"api_visible_or_null" variant of vnet_get_sup_hw_interface, which
returns NULL given an invalid sw_if_index, or a hidden sw interface:
- hw = vnet_get_sup_hw_interface (vnm, sw_if_index);
+ hw = vnet_get_sup_hw_interface_api_visible_or_null (vnm, sw_if_index);
if (hw == NULL || memif_device_class.index != hw->dev_class_index)
return clib_error_return (0, "not a memif interface");
Rename two existing xxx_safe functions -> xxx_or_null to make it
obvious what they return.
Type: fix
Change-Id: I29996e8d0768fd9e0c5495bd91ff8bedcf2c5697
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Reduces the vpp image virtual size by multiple gigabytes
Add a "show bihash" command which displays configured and current
virtual space in use by bihash tables.
Modify the .py test framework to call "show bihash" on test tear-down
Type: refactor
Change-Id: Ifc1b7e2c43d29bbef645f6802fa29ff8ef09940c
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
So far, GBP l3-out packets classification & policy relied on programmed
EP. All traffic to/from l3-out must go through a known EP.
This patch introduces a new feature where l3-out next-hops are only
known by their subnets (l3-out prefixes). As there are no longer known
EPs to program, an interface must be configured as external anonymous
l3-out. Packets classification & policy on this interface will rely on
the external subnets programmed in the BD VRF.
Note that contrary to all other interfaces in a GBP BD, external
anonymous l3-out interfaces have BD L2 learning turned on and rely on
ARP/ND.
Type: feature
Change-Id: Ieedb29dff4e967d08c4301e82d06bff450a63e5f
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: refactor
Change-Id: I492b6e88acadf0ab0e4d7b1c0c5d1cab84c1726f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I2d616a30e745045789287cb13b26fb12d51d2884
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
BRIDGE_DOMAIN_DUMP, CONTROL_PING, CONTROL_PING_REPLY, and show interface CLI
Change-Id: I2927573b66bb5dd134b37ffb72af0e6676750917
Signed-off-by: Steven Luong <sluong@cisco.com>
(cherry picked from commit 15c31921a628c5500cbed2ebc588d7ddbaa970a3)
|
|
Change-Id: I51e0d4a9ec62514a85bbe4c5f56a48d60ab6f4e4
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I79fc55f36a9b83957f84619bdf8cef08acc8ec24
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: Ia42e7c93ebe51a36470f1358827451bcb98da433
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: Idc1e1747035638777240b7ea9afcf675b22be7f1
Signed-off-by: Neale Ranns <nranns@cisco.com>
|