summaryrefslogtreecommitdiffstats
path: root/src/vnet/l2
AgeCommit message (Collapse)AuthorFilesLines
2018-07-26L2 Flood: use the buffer clone API rather than buffer recycleNeale Ranns1-260/+168
Change-Id: I40e4efd8061369efc535f0d49b2f63668b6d1d15 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-07-23L2 EFP: byteswap sw_if_index, enable flag can be u8 on .apiNeale Ranns3-4/+7
Change-Id: Ib99d02e84e468726feae4c386733da405b298e4f Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-15VPP-1341: fix loopback interface graph arcsDave Barach1-15/+0
Remove broken special case from l2_input.c:set_int_l2_mode(), which turns out to confuse the graph dispatch engine. The loopback TX function needs to push packets to either ethernet-input or to l2-input, based on bridge / BVI configuration. Rather than overloading a single graph arc - and making vain attempts to reconfigure it - create both arcs and use the correct one. Rewrote the loopback tx function as an idosyncratic multi-arch quad/single loop fn. Change-Id: I15b56ce641d90a11e7b3c7d23859f40e168dd7b2 Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-11bridge-domain:fix no_flood countEyal Bari1-0/+3
no_flood count was not updated on removal might couase a negative insertion index when adding new members Change-Id: I2caf2c453dfef1a9f16fb8fa2e5af42b4e653a69 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-05-31Improve L2FIB delete entry handling and "show l2fib" CLI optionsJohn Lo4-54/+69
Improve deletion of L2FIB MAC entry using l2fib_add_del API. If sw_if_index param specified in th API is non-zero, check that its value match that of the MAC entry to proceed with deletion. Improve "show l2fib" CLI to allow display of all entries, learned entries only, or added ovia CLI/API entries only. For added entry, show "no" under the age column to indicate entry does not age. Change-Id: I0bd2582c2b6bac268e551e4f8ca6dab2be4400ad Signed-off-by: John Lo <loj@cisco.com>
2018-05-29Add VLIB_NODE_FN() macro to simplify multiversioning of node functionsDamjan Marion1-22/+6
Change-Id: Ibab5e27277f618ceb2d543b9d6a1a5f191e7d1db Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-24Rewrite of l2-output nodeDamjan Marion1-332/+280
Change-Id: I8cbd1eac80ae4aeb173d02786e9ccf3b4877304d Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-11Periodic scan and probe of IP neighbors to maintain neighbor poolsJohn Lo1-5/+2
Scan IPv4 and IPv6 neigbor pool entries once a minute to keep them up to date. The neighbor of an entry is probed if its time-stamp is older than 1 minute. If the neighbor respond, its time-stamp will be updated. If there is no response from a neighbor, its entry will be deleted when the time-stamp of the entry become more than 4 minutes old. Static neighbor entries are not probed nor deleted. Implemented CLI and API to enable and disable priodic scan of IPv4, IPv6 or both types of IP neighbors. CLI is "ip scan-neighbor" and API is "ip_scan_neighbor_enable_disable". Other IP neighbor scan parameters can also be changed from their defaults via the CLI/API. Change-Id: Id1a0a934ace15d03db845aa698bcbb9cdabebfcd Signed-off-by: John Lo <loj@cisco.com>
2018-05-10vppinfra: use count_trailing_zeros in sparse_vec_indexDamjan Marion1-1/+1
It is much cheaper to use ctzll than to do shift,subtract and mask in likely case when we are looking for 1st set bit in the uword. Change-Id: I31954081571978878c7098bafad0c85a91755fa2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-24Support QOS_SOURCE_IP recording from L2 input node.Igor Mikhailov (imichail)1-0/+1
Some scenarios not involving ip[4,6]-input paths might benefit from IP header QOS fields recorded and applied. An example: L2 (overlay) traffic being encapsulated by VPP in VXLAN and transmitted on another (underlay) interface might want the QOS information carried over in the outer IP header. Change-Id: I4d9462c47ae6ba97680edb1e53340b17cfd7845b Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2018-04-18typo fix: UNKOWN -> UNKNOWNAndrey "Zed" Zaikin1-1/+1
Change-Id: I008a4d7ad7160d1f07e7ceef712a5318a9368308 Signed-off-by: Andrey "Zed" Zaikin <zed.0xff@gmail.com>
2018-04-13GBP V2Neale Ranns3-1/+6
update the GBP plugin to implement the full NAT feature set of opflex agent Change-Id: Ic06a039c889445ed0b9087fa1f292634192b0f8d Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-04-13bond: ping fails between l2 BD [VPP-1238]Steven1-0/+7
In dpdk based bonding, when the bond interface is configured for l2, it automatically sets the bond interface to promiscuous mode and sets rx redirect to ethernet-input. This allows traffic to be bridged to non compute node facing interface when it is received from the compute node interface. For native vpp bonding, we need to do similar things. When the bond interface is configured for l2, we set the slave interfaces to promiscuous mode and set rx redirect to ethernet-input because dpdk does not know anything about the bond interface. Likewise, when a new interface is enslaved, we also need to do the same thing if the bond interface has already been configured for l2. Change-Id: I7e168008e8a4221be74929b2a20e6db0ce8f3110 Signed-off-by: Steven <sluong@cisco.com>
2018-04-09L2: no-flood interface type in the Bridge-DomainNeale Ranns3-10/+33
Change-Id: I50ff0cacf88182f8e0be19840c50f4954de586e2 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-04-06Change l2-fwd node to allow possible feature before UU-FLOODJohn Lo1-6/+14
If l2-fwd node does not find an L2FIB entry for DMAC of packet, use input feature bitmap to find next node instead of always sending packet to l2-flood node to perform unknow unicast flood. It provides possibilty of using other feature to forward unknow unicast packet instead of flooding the BD. Change-Id: I56b277050537678c92bd548d96d87cadc8d2e287 Signed-off-by: John Lo <loj@cisco.com>
2018-03-29l2_input:optimize counter accessEyal Bari1-31/+16
only one counter update per frame (was updated per iteration) only access ethertype for casts (was always accessing ethertype) Change-Id: I3a3c3219ec63e975cf5bd8cf2d93103932a4aaa3 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-03-14Improve l2_macs_events API to provide MAC move informationJohn Lo4-8/+22
Change mac_entry layout in l2_macs_event API message so the MAC entry can be either add, delete or move where the sw_if_index of an existing MAC entry changed. Also added a 8-bit flags field in mac_entry for any future expansion. Change-Id: I3bf9e1cf2556f2938202025a5d0772c2ce2fc99f Signed-off-by: John Lo <loj@cisco.com>
2018-03-11vnet: l2-classify: prefetch (n+2, n+3) rather than (n+1, n+2) inside dual ↵Andrew Yourtchenko2-10/+10
loop code The dual loop within the L2 classifier processes the (n, n+1) packets, the prefetching was trying to prefetch (n+1, n+2) - thus half of the prefetches were not used - because the next iteration needs (n+2, n+3). Change-Id: I827d20845dbdd0dcdcf463ee25661a7921428992 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-03-06API: Add service definitions for events and singleton messages (second attempt)Marek Gradzki1-0/+5
Based on https://gerrit.fd.io/r/#/c/10920/ Updates service definition in stats.api with correct reply message names. Change-Id: I3282bee5304e667e23bc1fab3f43d967a50d880d Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2018-03-05Revert "API: Add service definitions for events and singleton messages."Ole Trøan1-5/+0
This reverts commit f7b7fa53b7eaec81d8c00c1023fb7d01f1f9761f. Change-Id: I87496342943248e94f01ada31459f387c0a3a610 Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-05API: Add service definitions for events and singleton messages.Ole Troan1-0/+5
Change-Id: I7de987c30b263d43521e6280c5273f30b5f6e11c Signed-off-by: Ole Troan <ot@cisco.com>
2018-02-26Fix current data offset to use vlib_buffer_get_current in input/output ACLSteve Shin1-5/+5
vlib_buffer_get_current() should be used for current data offset in ACL. This is required for output ACL where packets are decoded through a vxlan tunnel rx node. Change-Id: I6f739f251c3eb0d59ee4ae0da97aa04ddf667468 Signed-off-by: Steve Shin <jonshin@cisco.com>
2018-02-07classifier-based ACL: refactor + add output ACLAndrew Yourtchenko3-380/+144
For implementation of MACIP ACLs enhancement (VPP-1088), an outbound classifier-based ACL would be needed. There was an existing incomplete code for outbound ACLs, it looked almost exact copy of input ACLs, minus the various enhancements, trying to sync that code seemed error-prone and cumbersome to maintain in the longer run. This change refactors the input+output ACLs processing into a unified routine (thus any changes will have effect on both), and also adds the API to set the output interface ACL, with the same format and semantics as the existing input one (except working on output ACL of course). WARNING: IP outbound ACL in L3 mode clobbers the ip.* fields in the vnet_buffer_opaque_t, since the code is using l2_classify.* The net_buffer (p0)->ip.save_rewrite_length is rescued into l2_classify.pad.l2_len, and used to rewind the header in case of drop, so that ipX_drop prints something sensible. Change-Id: I62f814f1e3650e504474a3a5359edb8a0a8836ed Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-01-23VPPAPIGEN: vppapigen replacement in Python PLY.Ole Troan1-1/+1
This is a version of the VPP API generator in Python PLY. It supports the existing language, and has a plugin architecture for generators. Currently C and JSON are supported. Changes: - vl_api_version to option version = "major.minor.patch" - enum support - Added error checking and reporting - import support (removed the C pre-processor) - services (tying request/reply together) Version: option version = "1.0.0"; Enum: enum colours { RED, BLUE = 50, }; define foo { vl_api_colours_t colours; }; Services: service { rpc foo returns foo_reply; rpc foo_dump returns stream foo_details; rpc want_stats returns want_stats_reply events ip4_counters, ip6_counters; }; Future planned features: - unions - bool, text - array support (including length) - proto3 output plugin - Refactor C/C++ generator as a plugin - Refactor Java generator as a plugin Change-Id: Ifa289966c790e1b1a8e2938a91e69331e3a58bdf Signed-off-by: Ole Troan <ot@cisco.com>
2018-01-11api: fix handlers that explicitly depend on svm queueFlorin Coras1-8/+8
Fixes the remainig apis that explicitly check svm queue length. Change-Id: I6055c7c50050affee3098e162e15fb12c205e5db Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-01-11api: remove transport specific code from handlersFlorin Coras1-19/+20
This does not update api client code. In other words, if the client assumes the transport is shmem based, this patch does not change that. Furthermore, code that checks queue size, for tail dropping, is not updated. Done for the following apis: Plugins - acl - gtpu - memif - nat - pppoe VNET - bfd - bier - tapv2 - vhost user - dhcp - flow - geneve - ip - punt - ipsec/ipsec-gre - l2 - l2tp - lisp-cp/one-cp - lisp-gpe - map - mpls - policer - session - span - udp - tap - vxlan/vxlan-gpe - interface VPP - api/api.c OAM - oam_api.c Stats - stats.c Change-Id: I0e33ecefb2bdab0295698c0add948068a5a83345 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-01-09api: refactor vlibmemoryFlorin Coras2-8/+7
- separate client/server code for both memory and socket apis - separate memory api code from generic vlib api code - move unix_shared_memory_fifo to svm and rename to svm_fifo_t - overall declutter Change-Id: I90cdd98ff74d0787d58825b914b0f1eafcfa4dc2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-12-20L2 EmulationNeale Ranns1-0/+1
L2 Emulation is a feautre that is applied to L2 ports to 'extract' IP packets from the L2 path and inject them into the L3 path (i.e. into the appropriate ip[4|6]_input node). L3 routes in the table_id for that interface should then be configured as DVR routes, therefore the forwarded packet has the L2 header preserved and togehter the L3 routed system behaves like an L2 bridge. Change-Id: I8effd7e2f4c67ee277b73c7bc79aa3e5a3e34d03 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-10Break up vpe.apiNeale Ranns2-5/+273
- makes the VAPI generated file more consumable. - VOM build times improve. Change-Id: I838488930bd23a0d3818adfdffdbca3eead382df Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-11-10Further fix to SHG handling for ARP/ICMPv6 from BVI in a BDJohn Lo1-6/+25
For ARP/ICMPv6 packets received from a BVI in a BD, allow flood to all remote VTEPs via VXLAN tunnels irrespective of SHG check for ARP request or ICMPv6 neighbor solicitation packets only. All other packets types will flood normally as per SHG check. Change-Id: I17b1cef9015e363fb684c2b6506ed6c4efe70bba Signed-off-by: John Lo <loj@cisco.com> (cherry picked from commit 5b99133cff1ff0eb9043dd8bd3648b0b3aafa47e)
2017-11-08Fix SHG handling for ARP/ICMPv6 received from BVI in a BDJohn Lo1-0/+8
This change makes sure ARP/ICMPv6 brodcast packets received from the BVI of a BD can be flooded to all remote VTEPs via its VXLAN tunnels irrespective of SHG setting. Similar processing was done for unicast packets already and needs to be extpanded to ARP and ICMPv6 broadcast packets. Change-Id: I26ac43ecdbc81a769f742a583a156506f7e70d49 Signed-off-by: John Lo <loj@cisco.com> (cherry picked from commit c97b4aca0db8d84b17ceb03a14ab44346a2b3466)
2017-11-03silence l2fib_init() invalid read of size 2 found by address-sanitizerGabriel Ganne1-1/+6
l2fib_make_key() casts and reads the input 6-Bytes mac_address as u64, therefore if the mac_address is declared with 6 Bytes only, address-sanitizer rightly triggers an invalid read on the last two Bytes. However, l2fib_make_key() does a 16 bits shift to discard those 2 values, therefore, this invalid read is of no consequence (and so can be silenced safely). Change-Id: I38646fe60073093d25cdf135185d4c96136d55d0 Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2017-10-31Fix "l2fib add" CLI to allow adding of filter MAC entriesJohn Lo1-25/+17
When adding a filter MAC entry, the default sw_if_index of -1 was incorrectly validated and rejected. Change-Id: Id7f122b6269ea7c299a4335b05b748afaf01383c Signed-off-by: John Lo <loj@cisco.com>
2017-10-31l2fib: MAC: Fix uint64 to u8 byte arrayMohsin Kazmi5-49/+44
As per proposal on the mailing list, this patch fixes the represntation of MAC address in VPP API calls for · L2fib_add_del · L2_fib_table_details Change-Id: I31e17efd1a6314cded69666e693cb8fc33158d02 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2017-10-24Update L2 header offset after VLAN tag rewriteNeale Ranns1-1/+3
Change-Id: I5c1df59bce7c9654101672a12981e5bd62e9adc4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-24Add extern to *_main global variable declarations in header files.Dave Wallace3-2/+4
- Global variables declared in header files without the use of the 'extern' keword will result in multiple instances of the variable to be created by the compiler -- one for each different source file in which the the header file is included. This results in wasted memory allocated in the BSS segments as well as potentially introducing bugs in the application. Change-Id: I6ef1790b60a0bd9dd3994f8510723decf258b0cc Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-10-09vppapigen: support per-file (major,minor,patch) version stampsDave Barach1-0/+2
Add one of these statements to foo.api: vl_api_version 1.2.3 to generate a version tuple stanza in foo.api.h: /****** Version tuple *****/ vl_api_version_tuple(foo, 1, 2, 3) Change-Id: Ic514439e4677999daa8463a94f948f76b132ff15 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Ole Troan <ot@cisco.com>
2017-10-03Update L2FIB entry timestamp only if BD aging enabled (VPP-1002)John Lo2-3/+5
Change L2 learning path so it update stale timestamp in MAC entry only if aging is enabled on the BD for the MAC entry. Change-Id: I7babe986ceef3c030d8ef9185076c42b405f7b0f Signed-off-by: John Lo <loj@cisco.com>
2017-10-03Repair vlib API socket serverDave Barach1-5/+7
- Teach vpp_api_test to send/receive API messages over sockets - Add memfd-based shared memory - Add api messages to create memfd-based shared memory segments - vpp_api_test supports both socket and shared memory segment connections - vpp_api_test pivot from socket to shared memory API messaging - add socket client support to libvlibclient.so - dead client reaper sends ping messages, container-friendly - dead client reaper falls back to kill (<pid>, 0) live checking if e.g. a python app goes silent for tens of seconds - handle ping messages in python client support code - teach show api ring about pairwise shared-memory segments - fix ip probing of already resolved destinations (VPP-998) We'll need this work to implement proper host-stack client isolation Change-Id: Ic23b65f75c854d0393d9a2e9d6b122a9551be769 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-02L2-FIB:add mac learn events testEyal Bari1-56/+49
fixes an issue where events were not sent if BD doesn't enable mac aging Change-Id: Iddc53cb5c45e560633e6c5cff2731dccfc70ad5b Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-09-15Update of free text tag patch for BDJerome Tollet3-4/+7
Change-Id: Ia886ff2bfa2cf33ffbaa35ec89494d4300ec2769 Signed-off-by: Jerome Tollet <jtollet@cisco.com>
2017-09-07Support for bridge domain free text tagJerome Tollet4-2/+66
Change-Id: I9a75fdafd0c1d87b6f071fda5b77ff5f6b79deb7 Signed-off-by: Jerome Tollet <jtollet@cisco.com>
2017-09-03Improve L2FIB PDR/NDR performance (VPP-963)John Lo4-18/+30
1. Limit MAC entry update per l2-learn call to reduce update burst when wall clock advance to the the next minute so all MAC time stamps are behind current time needing update. 2. Optimize l2-learn node fast path code sequence. 3. Invalidate cache_key when update MAC entry. 4. Change L2 learn hit counter to L2 learn hit-update counter. 5. Increase L2FIB table memory size to 512MB to fit 4M entries 6. Set MAC learn limit at 4M entries Change-Id: I3075ee8fb59645a56850126bac2e3e6d341cef4d Signed-off-by: John Lo <loj@cisco.com>
2017-08-22Increase default MAC learn limit and check it in learn-update pathJohn Lo5-4/+8
1. Increase default MAC learn limit from 1M to 8M entries. 2. Check MAC learn limit in MAC learning update path. 3. Allow disable of want_l2_macs_events to set MAC learn limit 4. Other minor cleanups Change-Id: I62438440937b5fa455e16f4a2e4d910277753395 Signed-off-by: John Lo <loj@cisco.com>
2017-08-03Add support for API client to receive L2 MAC eventsJohn Lo8-160/+494
Added APIs want_l2_macs_events and l2_macs_event to allow an API client to receive notification events from VPP for MAC learned or aged in L2FIB. Only one API client is allowed for L2 MAC events. The want_l2_macs_events API allow caller to specify MAC learn limit, event scan delay and max number of MACs that can be included in a event message. These parameters should be choosen properly as to not have too many MAC events sent by VPP and overwhelm the API share memory. They can all be left as 0's so VPP will setup reasonable defaults which are: 1000 learn limit, 100 msec scan delay and 100 MACs per event message. If want_l2_macs_events is never called, VPP learning and aging should behave as before except that MAC entries provisioned by API or CLI will not be aged, even if it is not set as static_mac. These non static MACs, however, can be overwritten by MAC learning on a MAC move as a leared MAC. Only learned MACs are subject to aging. Change-Id: Ia3757a80cf8adb2811a089d2eafbd6439461285c Signed-off-by: John Lo <loj@cisco.com>
2017-07-31CLI:add l2 input/outut to "sh int features"Eyal Bari5-1/+51
Change-Id: If608bbc7f4c8b0d5c3a237098a20279e407c82d3 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-07-24SPAN:add l2 mirrorEyal Bari3-10/+16
added span feature nodes for l2-input / l2-output Change-Id: Ib6e0ce60d0811901b6edd70209e6a4c4a35cd8ff Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-07-23Improve L2 Input/Output Feature Infrastructure and UsageJohn Lo13-319/+154
Simplify L2 output feature infra to unify with L2 input feature infra using the newly improved feature bitmap mechanism. Updated all L2 features to use the more efficient infra functions. Change-Id: If8f463826b0af0717129befe92a27ea8cfc40449 Signed-off-by: John Lo <loj@cisco.com>
2017-07-20L2FWD:move vec_validate out of access functionEyal Bari2-2/+9
Change-Id: Id9737b6aa2b6fe3032f4627dfdbd2ea728cc3fb1 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-07-19Add a bihash prefetchable bucket-level cacheDave Barach1-4/+4
According to Maciek, the easiest way to leverage the csit "performance trend" job is to actually merge the patch once verified. Manual testing indicates that the patch improves l2 path performance. Other use-cases are TBD. It's possible that we'll need to back out the patch depending on what happens. Change-Id: Ic0a0363de35ef9be953ad7709c57c3936b73fd5a Signed-off-by: Dave Barach <dave@barachs.net>