Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: improvement
Change-Id: Iac01d7830b53819ace8f199554be10ab89ecdb97
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: refactor
Change-Id: Id10cbf52e8f2dd809080a228d8fa282308be84ac
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Use autogenerated code.
Does not change API definitions.
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I7b84767e75d5f8310ec071036a5780fa4530f79f
|
|
VRRP prefix length is 5 bytes, doesn't make sense
to compare with 6 bytes mac address
Type: fix
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: I70a9c9ca769f34a81cd568f9e6b9a3538e6ec710
|
|
Coverity complains that the statement
if (!e)
return -1;
is never true and is logically dead code in the subject function. It is
right. e is assigned in both the if and else statementes immediately above
and can never be null.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ic2d0e76eff696ee689a68a07913876dcecf5c647
|
|
Coverify complains deref_ptr before null check.
deref_ptr: Directly dereferencing pointer reg.
1214 vl_reg = vl_api_client_index_to_registration (reg->client_index);
1215 ALWAYS_ASSERT (vl_reg != NULL);
1216
CID 216104 (#1 of 1): Dereference before null check (REVERSE_INULL)
check_after_deref: Null-checking reg suggests that it may be null, but it
has already been dereferenced on all paths leading to the check.
1217 if (reg && vl_api_can_send_msg (vl_reg))
I believe the check is for vl_reg instead of reg because vl_reg may be NULL
after the call vl_api_client_index_to_registration.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ic4eb2284e65c48396f20d5024a4241c80c70c886
|
|
Running vpp without any interface configured and then invoking the
binary-api l2_xconnect_dump causes vpp to crash in l2_input_is_xconnect due
to l2input_main.configs has no memory allocated to it, not even for the local
interface which exists all the times.
The reason that l2input_main.configs has no memory allocated to it was due to
gerrit patch 29232 which took out a line in l2input_init
/* Create the config vector */
vec_validate (mp->configs, 100);
The fix is to iterate through l2input_main.configs for each interface in
l2 to call l2_input_is_xconnect when dumping l2_xconnect interfaces.
Type: fix
Fixes: gerrit 29232
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I8d9cba4b7eba4c2e0c60887c4fd57d5ec3b06d3b
|
|
Type: feature
please see FEATURE.yaml for details.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Signed-off-by: Pim van Pelt <pim@ipng.nl>
Change-Id: I04a45c15c0838906aa787e06660fa29f39f755fa
|
|
want_l2_macs_events
Type: feature
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
Change-Id: I6de6dae7da4ec1001e2811975a9b67acfc1a148c
|
|
Type: feature
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
Change-Id: I57ed6699050445d9c9aec98eff3aab56735aca54
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
|
|
Type: refactor
Change-Id: I077110e1a422722e20aa546a6f3224c06ab0cde5
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
VAT2: A completely auto-generated replacement of VAT.
Reads input message in JSON from stdin and outputs received messages in JSON.
A VAT2 plugin is automatically built for a .api file.
There no longer a need for a separate _test.c.
Example:
vat2 show_version {}
{
"_msgname": "show_version_reply",
"retval": 0,
"program": "vpe",
"version": "21.01-rc0~411-gf6eb348a6",
"build_date": "2020-11-19T09:49:25",
"build_directory": "/vpp/autogen3"
}
vat2 sw_interface_dump '{"sw_if_index": -1,
"name_filter_valid": 0,
"name_filter": ""}'
[{
"_msgname": "sw_interface_details",
"sw_if_index": 0,
"sup_sw_if_index": 0,
"l2_address": "00:00:00:00:00:00",
"flags": "Invalid ENUM",
"type": "IF_API_TYPE_HARDWARE",
"link_duplex": "LINK_DUPLEX_API_UNKNOWN",
"link_speed": 0,
"link_mtu": 0,
"mtu": [0, 0, 0, 0],
"sub_id": 0,
"sub_number_of_tags": 0,
"sub_outer_vlan_id": 0,
"sub_inner_vlan_id": 0,
"sub_if_flags": "Invalid ENUM",
"vtr_op": 0,
"vtr_push_dot1q": 0,
"vtr_tag1": 0,
"vtr_tag2": 0,
"outer_tag": 0,
"b_dmac": "00:00:00:00:00:00",
"b_smac": "00:00:00:00:00:00",
"b_vlanid": 0,
"i_sid": 0,
"interface_name": "local0",
"interface_dev_type": "local",
"tag": ""
}]
This is the first phase and vat2 is not integrated in packaging yet.
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Ib45ddeafb180ea7da8c5dc274a9274d7a4edc876
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
ethernet dataplane loads MAC addresses as 64-bits loads for efficiency.
We must make sure it is valid, especially for the vector of secondary
MACs.
Type: fix
Change-Id: I851e319b8a973c154e85ff9f05f3b8e385939788
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: refactor
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: Id1801519638a9b97175847d7ed58824fb83433d6
|
|
Type: improvement
reduce the compile time by moving the bihash includes out of ip[46].h
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I6b9216e10aff1013071f9238b3e1ebbdd205bd80
|
|
Type: fix
After clearing the l2fib with 'vppctl clear l2fib', a SEGV occurs the
next time a MAC address is learned.
In l2fib_clear_table(), the l2fib bihash is freed and then
l2fib_table_init() is called to reinitialize it. l2fib_table_init()
will not do anything if l2fib_main.mac_table_initialized is set to 1.
Reset the value of l2fib_main.mac_table_initialized to 0 before
calling l2fib_table_init().
Change-Id: I87f1a3f9a46c951f36c1c0a5ab795b0ec08c81a8
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ifc6b4c15f6055df4f403e9cd633e31f061a6d2da
|
|
Type: improvement
- cache the values form the BD on the input config to avoid loading
- avoid the short write long read on the sequence number
- use vlib_buffer_enqueue_to_next
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I33442b9104b457e4c638d26e9ad3bc965687a0bc
|
|
Type: style
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I26a19e42076e031ec5399d5ca05cb49fd6fbe1cd
|
|
Currently l2 fib allocates 512MB hash table unconditionally on startup.
This patch postpones table creation up to the point where first
interface is put into l2 mode or mac entry is added.
In addition it reduces default table size to 128MB and increases number
of buckets 4 times. This default setting should be enough to keep 1M mac
entries.
Also, new startup.conf section is added which allows user to change memory
and bucket size. .i.e:
l2fib {
table-size 512M
num-buckets 524288
}
Type: improvement
Change-Id: I2a29209aa3545181f0087544c97a54d8157b6ec5
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Static analysis identified a possible null pointer dereference. It
was introduced by a recent patch which expanded the DMAC comparison
on inbound packets on a BVI interface to include any secondary MAC
addresses which were added to an interface.
Check if the pointer is null before dereferencing.
Change-Id: Ic2afe2b062eda32977e05bf3f98d82c1fe64620c
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
VRRP cannot be used on a BVI interface currently because packets sent
to the virtual mac address of the VR fail the destination mac check in
l2_to_bvi().
Apparently people want to use VRRP on BVI interfaces, so update the
check in l2_to_bvi() so that it will check any secondary mac addresses
which have been added to the ethernet interface if the destination mac
address does not match the primary mac address for the interface.
An equivalent check is already done in ethernet_input_inline() for L3
interfaces which are in promiscuous mode.
Change-Id: I7c5bf624dafda8744fea236c704e8e17e5f53b35
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ibad744788e200ce012ad88ff59c2c34920742454
|
|
Short Load/Stores combined with prefetching in the beginning of the loop
place too much pressure on AGUs and memory accesses.
The patch interleaves load/store operations with computational operations
to alleviate the pain point.
vlib_get_buffers is also leveraged.
Redefine u8 dst_and_src[12] instead of dst[6] and src[6] in struct
l2input_trace_t in order to merge two copys into one.
Type: improvement
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Change-Id: I7d3df7732c476069235e3019c68f0f53bca9637e
|
|
Cleanup L2/L3 mode switch to not redirect to/from ethernet-input node
as it is no longer necessary.
L2 patch should use sw_if_index for device feature enable/disable.
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I0f24161d027b07c188fd1e05276146f94c075710
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ibf468970b56fc6bf8d5fb6ba491dd3e727464fc0
|
|
facilitates use of papi beyond the tests.
Type: improvement
Change-Id: I3d502d9130b81a7fb65ee69bb06fe55802b28a27
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Merge two memcpy into one by swapping src and dst address in
l2fwd_trace_t.
Type: improvement
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Change-Id: I71c5ecad0b453a434b1cb292ef03d88a760255c8
|
|
Template instances can allocate BIHASH_KVP_PER_PAGE data records
tangent to the bucket, to remove a dependent read / prefetch.
Template instances can ask for immediate memory allocation, to avoid
several branches in the lookup path.
Clean up l2 fib, gpb plugin codes: use clib_bihash_get_bucket(...)
Use hugepages for bihash allocation arenas
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Damjan Marion <damarion@cisco.com>
Change-Id: I92fc11bc58e48d84e2d61f44580916dd1c56361c
|
|
vlib_buffer_clone(...) may not manage to produce any buffer clones at
all.
vlib_buffer_clone_256 should not smash the original buffer reference
count if no clones are produced.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I14d9d53637a220485c7a0036cfc75a4149b264ea
|
|
Use consistent API types.
Type: fix
Change-Id: I7ac7cd00606101864fa3422e7b9ea2f1143665dd
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Type: improvement
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ia441c069afe79ccd6428159df944d4c1d10a992d
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I402b1b06db736b2a7a242ce70ffd409c7c0a4fc2
|
|
Type: refactor
currently vnet_classify.h is included in ip.h where it's not required.
Change-Id: Id55682637601655aa2edda681536a979c8e323bd
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: docs
Signed-off-by: John DeNisco <jdenisco@cisco.com>
Change-Id: I7280e5c5ad10a66c0787a5282291a2ef000bff5f
|
|
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I711432f589ee4a4527cf795526d3b4031999f71d
|
|
Type: docs
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: Ib34440c137f24621002ce9463515c632c472a293
|
|
Type: docs
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: Icd22f2ec7076bb11d6ac7e7d147bd58dc5ad1527
|
|
Without understanding what is going on,
a pattern from l2_fwd.c is applied to l2_patch.c file.
Type: fix
Fixes: d770cfc96257f9bd9e0c96c8ebe50e4531dc1bc5
Ticket: VPP-1799
Change-Id: Ia97d448f9d1846549f57ea69044ae15fa39bb942
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Type: fix
Change-Id: I59549b3aab5a0ccfe7db02757f78528e028121a5
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
- ip-neighbour: generic neighbour handling; APIs, DBs, event handling,
aging
- arp: ARP protocol implementation
- ip6-nd; IPv6 neighbor discovery implementation; separate ND,
MLD, RA
- ip6-link; manage link-local addresses
- l2-arp-term; events separated from IP neighbours, since they are not
the same.
vnet retains just enough education to perform ND/ARP packet
construction.
arp and ip6-nd to be moved to plugins soon.
Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Change-Id: I28f7a658be3f3beec9ea32635b60d1d3a10d9b06
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I2272521d6e69edcd385ef684af6dd4eea5eaa953
|
|
Introduce AddressSanitizer support: https://github.com/google/sanitizers/
This starts with heap instrumentation. vlib_buffer, bihash and stack
instrumentation should follow.
Type: feature
Change-Id: I7f20e235b2f79db72efd0e756f22c75f717a9884
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
This is a preparation step for migrating NAT to use SVR (shallow virtual
reassembly) to conserve space in vnet_buffer. Since max rewrite length
is currently pre-data size (128), u8 is sufficient to hold that value.
Type: refactor
Change-Id: I5374bb396e178245b870cb0bbf1370d2a54230bc
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
This fix was first made in
commit fdea5c6a00b74971dbb1b7ec4e25839a871006ca
but was subsequently lost in
commit 053204ab039d34a990ff0e14c32ce3b294fcce0e
Added unit test for setting VTR on a non-sub-interface to
help ensure no future regressions of this ability.
Type: fix
Change-Id: I71ce2684fb72383741455829ae2d397ea2e95eae
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Type: style
Change-Id: I286280fffa6ab5d3e15986911a4ccc35efbf41c3
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
l2-flood and bier nodes reset vector length without updating it to its
effective size. Introduce a helper to do it (this allows ASAN to keep
track of the new vector size).
Type: refactor
Change-Id: I2d652550c440f0553a2b49c3ee3d37b49ebc16c3
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Change-Id: I8f5f4841965beb13ebc8c2a37ce0dc331c920109
Signed-off-by: Damjan Marion <damarion@cisco.com>
|