aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/lisp-gpe/lisp_gpe_fwd_entry.c
AgeCommit message (Collapse)AuthorFilesLines
2017-10-04[aarch64] Fixes CLI crashes on dpaa2 platform.Christophe Fontaine1-5/+5
- always use 'va_args' as pointer in all format_* functions - u32 for all 'indent' params as it's declaration was inconsistent Change-Id: Ic5799309a6b104c9b50fec309cba789c8da99e79 Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
2017-09-13gpe: initialize fib index for native forward entriesFlorin Coras1-4/+6
Change-Id: I972e6e645c3ae9cba4bb2b4e32c0272dfd67e87b Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-11FIB table add/delete APINeale Ranns1-3/+6
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-04LISP: re-fetch mapping before it expiresFilip Tehlar1-13/+47
Change-Id: I0581a1bddad55d8d573c546ec84b0b2760abab3d Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-08-08L2 over MPLSNeale Ranns1-2/+3
[support for VPWS/VPLS] - switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths - VLIB nodes to handle pop/push of MPLS labels to L2 Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-06-08Add gpe native-forward static route supportFlorin Coras1-5/+46
Change-Id: I744e7d64d94dbb302f2c1246663480f720672ee2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-06-06Fix coverity issueFilip Tehlar1-0/+3
Change-Id: I5f7dc38beb96b600be67599049f951d8a17ff8da Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-06-05LISP-GPE: return index of newly created fwd entry, VPP-868Filip Tehlar1-0/+3
Change-Id: I4fc45097cb994ab6a59503d9fcfb693d1c7ec442 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-05-26LISP: do not try to delete paths when fwd entry is negativeFilip Tehlar1-4/+7
Change-Id: I50a0cbc7d8ecc94ad494df4720bb4199673e9793 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-05-22LISP-GPE: add dump call for VNIs in useFilip Tehlar1-0/+23
Change-Id: I394af7c1ac9fd0177ff5d298e4008245df54b436 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-04-13LISP: make statistics thread safeFilip Tehlar1-14/+49
Change-Id: I056dc6246f79d887d69ad459a6b8b3092a099baa Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-04-07MPLS McastNeale Ranns1-0/+1
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-05LISP: fix crash when adding a negative forwarding entry, VPP-681Filip Tehlar1-15/+14
Change-Id: I190696da5555c05074ee0eee32eb914bd16e38fb Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-03-22LISP: improve DP speedFilip Tehlar1-4/+21
Change-Id: I5bd0721b70dfc240fa9225df3704774f6b0ede81 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-03-21LISP statisticsFilip Tehlar1-22/+64
Change-Id: I399cac46d279e020ba33459ef759d9d29d3ac716 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-02-25Add NSH to GPE decap pathFlorin Coras1-4/+4
Change-Id: I97681322fa9ca81736100b4d32eab84868886c7b Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-02-21Rename LISP GPE API to GPEFilip Tehlar1-2/+2
Change-Id: I133c55bce46d40ffddabbbf8626cbd3d072522d4 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-02-14Fix coverity issues: ioamShwetha Bhandari1-5/+6
Change-Id: I0963760a7da95612d5cab19596919b369a4d0f8e Signed-off-by: Shwetha Bhandari <shwethab@cisco.com>
2017-02-13Basic support for LISP-GPE encapsulated NSH packetsFlorin Coras1-4/+305
Change-Id: I97fedb0f70dd18ed9bbe985407cc5fe714e8a2e2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-01-30LISP: add dump calls for GPE entries APIFilip Tehlar1-0/+26
Change-Id: Ie7f51643fd3522a0fa8df8d0309305481c211f5f Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-01-13LISP: Fix gpe APIFilip Tehlar1-1/+1
Change-Id: Iba076fc13e3f870c49fc5ca971dc7b8799188a27 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+1053
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>