summaryrefslogtreecommitdiffstats
path: root/src/vnet/lisp-gpe
AgeCommit message (Collapse)AuthorFilesLines
2018-12-07FIB recusrion loop checks traverse midchain adjacenciesNeale Ranns1-44/+10
if a tunnel's destination address is reachable through the tunnel (see example config belwo) then search for and detect a recursion loop and don't stack the adjacency. Otherwise this results in a nasty surprise. DBGvpp# loop cre DBGvpp# set int state loop0 up DBGvpp# set int ip addr loop0 10.0.0.1/24 DBGvpp# create gre tunnel src 10.0.0.1 dst 1.1.1.1 DBGvpp# set int state gre0 up DBGvpp# set int unnum gre0 use loop0 DBGvpp# ip route 1.1.1.1/32 via gre0 DBGvpp# sh ip fib 1.1.1.1 ipv4-VRF:0, fib_index:0, flow hash:[src dst sport dport proto ] locks:[src:plugin-hi:2, src:default-route:1, ] 1.1.1.1/32 fib:0 index:11 locks:4 <<< this is entry #11 src:CLI refs:1 entry-flags:attached, src-flags:added,contributing,active, path-list:[14] locks:2 flags:shared,looped, uPRF-list:12 len:1 itfs:[2, ] path:[14] pl-index:14 ip4 weight=1 pref=0 attached-nexthop: oper-flags:recursive-loop,resolved, cfg-flags:attached, 1.1.1.1 gre0 (p2p) [@0]: ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800 stacked-on entry:11: <<<< and the midchain forwards via entry #11 [@2]: dpo-drop ip4 src:recursive-resolution refs:1 src-flags:added, cover:-1 forwarding: unicast-ip4-chain [@0]: dpo-load-balance: [proto:ip4 index:13 buckets:1 uRPF:12 to:[0:0]] [0] [@6]: ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800 stacked-on entry:11: [@2]: dpo-drop ip4 DBGvpp# sh adj 1 [@1] ipv4 via 0.0.0.0 gre0: mtu:9000 4500000000000000fe2fb0cc0a0000010101010100000800 stacked-on entry:11: [@2]: dpo-drop ip4 flags:midchain-ip-stack midchain-looped <<<<< this is a loop counts:[0:0] locks:4 delegates: children: {path:14} Change-Id: I39b82bd1ea439be4611c88b130d40289fa0c1b59 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-14Remove c-11 memcpy checks from perf-critical codeDave Barach1-1/+1
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-23c11 safe string handling supportDave Barach7-30/+30
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-22lisp-gpe: register udp port only if enabled (VPP-1468)Florin Coras1-5/+7
Change-Id: I7d0930a19d927bbd7ba3fc879d5a0c8064827629 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-09-25L2 BD: introduce a BD interface on which to send UU packetsNeale Ranns1-2/+2
Change-Id: I21ad6b04c19c8735d057174b1f260a59f2812241 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-08-15Remove client_index field from replies in APIOndrej Fabry1-1/+0
- replies should not need to contain client_index since it is used to identify sender of requests to VPP Change-Id: Iece3853b3f020054ee1652b149d0cf8d9580db4e Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
2018-08-14Fix context field position in API definitionOndrej Fabry1-1/+1
- context should be first field for reply messages, just like it is for all other 545 replies Change-Id: Ib291036d3389dbc26c8e9194966d01cab81534aa Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
2018-07-11avoid using thread local storage for thread indexDamjan Marion2-2/+2
It is cheaper to get thread index from vlib_main_t if available... Change-Id: I4582e160d06d9d7fccdc54271912f0635da79b50 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-01-30Allow the provider of a midchain adjacency to pass context data that is ↵Neale Ranns1-1/+3
returned in the fixup function Change-Id: I458e6e03b03e27775df33a2fd302743126d6ac44 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-01-23VPPAPIGEN: vppapigen replacement in Python PLY.Ole Troan1-1/+1
This is a version of the VPP API generator in Python PLY. It supports the existing language, and has a plugin architecture for generators. Currently C and JSON are supported. Changes: - vl_api_version to option version = "major.minor.patch" - enum support - Added error checking and reporting - import support (removed the C pre-processor) - services (tying request/reply together) Version: option version = "1.0.0"; Enum: enum colours { RED, BLUE = 50, }; define foo { vl_api_colours_t colours; }; Services: service { rpc foo returns foo_reply; rpc foo_dump returns stream foo_details; rpc want_stats returns want_stats_reply events ip4_counters, ip6_counters; }; Future planned features: - unions - bool, text - array support (including length) - proto3 output plugin - Refactor C/C++ generator as a plugin - Refactor Java generator as a plugin Change-Id: Ifa289966c790e1b1a8e2938a91e69331e3a58bdf Signed-off-by: Ole Troan <ot@cisco.com>
2018-01-11api: remove transport specific code from handlersFlorin Coras1-4/+4
This does not update api client code. In other words, if the client assumes the transport is shmem based, this patch does not change that. Furthermore, code that checks queue size, for tail dropping, is not updated. Done for the following apis: Plugins - acl - gtpu - memif - nat - pppoe VNET - bfd - bier - tapv2 - vhost user - dhcp - flow - geneve - ip - punt - ipsec/ipsec-gre - l2 - l2tp - lisp-cp/one-cp - lisp-gpe - map - mpls - policer - session - span - udp - tap - vxlan/vxlan-gpe - interface VPP - api/api.c OAM - oam_api.c Stats - stats.c Change-Id: I0e33ecefb2bdab0295698c0add948068a5a83345 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-01-09api: refactor vlibmemoryFlorin Coras1-1/+1
- separate client/server code for both memory and socket apis - separate memory api code from generic vlib api code - move unix_shared_memory_fifo to svm and rename to svm_fifo_t - overall declutter Change-Id: I90cdd98ff74d0787d58825b914b0f1eafcfa4dc2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-12-11ONE-33 "one statistics flush" throws assert when one counter not addedSwarup Nayak1-0/+3
Change-Id: Id10f10889c3036a6db21c999c1e6c54fc1770213 Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
2017-12-09BIER in non-MPLS netowrksNeale Ranns1-0/+2
as decsribed in section 2.2 ihttps://tools.ietf.org/html/draft-ietf-bier-mpls-encapsulation-10 with BIFT encoding from: https://tools.ietf.org/html/draft-wijnandsxu-bier-non-mpls-bift-encoding-00 changes: 1 - introduce the new BIFT lookup table. BIER tables that have an associated MPLS label are added to the MPLS-FIB. Those that don't are added to the BIER table 2 - BIER routes that have no associated output MPLS label will add a BIFT label. 3 - The BIER FMask has a path-list as a member to resolve via any possible path. Change-Id: I1fd4d9dbd074f0e855c16e9329b81460ebe1efce Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-02gpe: fix gpe enable/disable commandFlorin Coras1-1/+1
Return error if not input provided. Change-Id: I4a68fafaf4efd74395e513baa7f18fa55b83de87 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-31LISP: add P-ITR/P-ETR/xTR API handlers, ONE-24Filip Tehlar6-9/+19
Change-Id: I25937cd7470c826d1e833e65530ae959c39139d8 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-10-24Add extern to *_main global variable declarations in header files.Dave Wallace1-1/+1
- Global variables declared in header files without the use of the 'extern' keword will result in multiple instances of the variable to be created by the compiler -- one for each different source file in which the the header file is included. This results in wasted memory allocated in the BSS segments as well as potentially introducing bugs in the application. Change-Id: I6ef1790b60a0bd9dd3994f8510723decf258b0cc Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-10-09vppapigen: support per-file (major,minor,patch) version stampsDave Barach1-0/+2
Add one of these statements to foo.api: vl_api_version 1.2.3 to generate a version tuple stanza in foo.api.h: /****** Version tuple *****/ vl_api_version_tuple(foo, 1, 2, 3) Change-Id: Ic514439e4677999daa8463a94f948f76b132ff15 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Ole Troan <ot@cisco.com>
2017-10-04[aarch64] Fixes CLI crashes on dpaa2 platform.Christophe Fontaine4-10/+10
- always use 'va_args' as pointer in all format_* functions - u32 for all 'indent' params as it's declaration was inconsistent Change-Id: Ic5799309a6b104c9b50fec309cba789c8da99e79 Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
2017-09-13gpe: initialize fib index for native forward entriesFlorin Coras1-4/+6
Change-Id: I972e6e645c3ae9cba4bb2b4e32c0272dfd67e87b Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-11FIB table add/delete APINeale Ranns3-9/+22
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-04LISP: re-fetch mapping before it expiresFilip Tehlar3-14/+58
Change-Id: I0581a1bddad55d8d573c546ec84b0b2760abab3d Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-08-23Remove unused retval from gpe_native_fwd_rpath type definitionMarek Gradzki1-2/+0
Change-Id: I89a10204454aeea07412289b153ba50d6a15498c Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2017-08-23gpe: add l2 lb countersFlorin Coras1-1/+5
Change-Id: I81b3fc6266ad02239b6f1a216adc283efdcf0dce Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-08-18gpe: fix sub-interface hash lookupFlorin Coras2-10/+10
Change-Id: Ice6b3818ee24c7c248bf61e4d6c1ef2a85cb8fb1 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-08-08L2 over MPLSNeale Ranns3-13/+15
[support for VPWS/VPLS] - switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths - VLIB nodes to handle pop/push of MPLS labels to L2 Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-06-16LISP-GPE: add test CLI for NSHFilip Tehlar2-0/+132
Change-Id: I9999474c1a4b744f5d5880ee99a0293c576f2819 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-06-16Fix vni/dp_table endianness for gpe iface addition (VPP-882)Florin Coras1-6/+8
Change-Id: I2b78dad740b67fc05b0e2cf9c180809bc0962cd5 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-06-16Fix gpe_native_fwd_rpaths_get (VPP-883)Florin Coras1-1/+3
Change-Id: Iab2aa5fd92b9e95049f55fce4177e236a482723c Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-06-15Add VAT handlers for LISP-GPE APIFilip Tehlar2-11/+24
Change-Id: Id1139533c41cabef48394b5d79750608e0b74179 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-06-09Fix gpe coverity issue (VPP-874)Florin Coras1-3/+8
Change-Id: I70fb60619a0a02d891276ea6c7ac277ba2b26fa3 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-06-08LISP: add NSH supportFilip Tehlar2-4/+7
Change-Id: I971c110ed126f1a24a963f9d3b88cf8f8c308816 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-06-08Add gpe native-forward static route supportFlorin Coras5-16/+402
Change-Id: I744e7d64d94dbb302f2c1246663480f720672ee2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-06-06Fix coverity issueFilip Tehlar1-0/+3
Change-Id: I5f7dc38beb96b600be67599049f951d8a17ff8da Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-06-05LISP-GPE: return index of newly created fwd entry, VPP-868Filip Tehlar4-2/+20
Change-Id: I4fc45097cb994ab6a59503d9fcfb693d1c7ec442 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-06-05LISP: fix GPE entry dump, VPP-871Filip Tehlar1-5/+5
Change-Id: Ifcd6d2caecce29c8b4605d06b9df82b36a403e74 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-05-26LISP: do not try to delete paths when fwd entry is negativeFilip Tehlar1-4/+7
Change-Id: I50a0cbc7d8ecc94ad494df4720bb4199673e9793 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-05-22LISP-GPE: add dump call for VNIs in useFilip Tehlar5-1/+74
Change-Id: I394af7c1ac9fd0177ff5d298e4008245df54b436 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-05-19Enforce Bridge Domain ID range to match 24-bit VNI rangeJohn Lo1-0/+6
Enforce bridge domain ID range to allow a maximum value of 16M which matches the range of 24-bit VNI used for virtual overlay network ID. Fix "show bridge-domain" output to allow full 16M BD ID range to be displayed using 8-digit spaces. Change-Id: I80d9c76ea7c001bcccd3c19df1f3e55d2970f01c Signed-off-by: John Lo <loj@cisco.com>
2017-05-10completelly deprecate os_get_cpu_number, replace new occurencesDamjan Marion1-1/+1
Change-Id: I82c663bc0866c6c68ba354104b0bb059387f4b9d Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-07Remove L2 GPE interface from bridge when deleting, VPP-833Florin Coras1-0/+6
Change-Id: I32725006e9235a02cada5b0ad8974bfc4274339f Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-04-25"autoreply" flag: autogenerate standard xxx_reply_t messagesDave Barach1-44/+4
Change-Id: I72298aaae7d172082ece3a8edea4217c11b28d79 Signed-off-by: Dave Barach <dave@barachs.net>
2017-04-24BD:unify bridge domain creation codeEyal Bari1-4/+3
Change-Id: I29082e7a0c556069180a157e55b3698cf8cd38c7 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-04-13Remove unsed parameter from fib_table_entry_special_add() (only used in FIB ↵Neale Ranns1-2/+1
tests). The DPO was incorrectly initialised with FIB_PROTO_MAX Change-Id: I962df9e162e4dfb6837a5ce79ea795d5ff2d7315 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-13LISP: make statistics thread safeFilip Tehlar5-41/+65
Change-Id: I056dc6246f79d887d69ad459a6b8b3092a099baa Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-04-07MPLS McastNeale Ranns1-0/+1
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-07Fix gpe dp args to allow for 32 bit bridge domain ids, VPP-690Florin Coras1-1/+1
Change-Id: I4e3df197eed33acbceaff495279def8716773303 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-04-06Use thread local storage for thread indexDamjan Marion1-8/+8
This patch deprecates stack-based thread identification, Also removes requirement that thread stacks are adjacent. Finally, possibly annoying for some folks, it renames all occurences of cpu_index and cpu_number with thread index. Using word "cpu" is misleading here as thread can be migrated ti different CPU, and also it is not related to linux cpu index. Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-05LISP: fix crash when adding a negative forwarding entry, VPP-681Filip Tehlar1-15/+14
Change-Id: I190696da5555c05074ee0eee32eb914bd16e38fb Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-04-03Adjacency layout change and move to vnet/adjNeale Ranns1-2/+2
Change-Id: I03195a86c69f84a301051c6b3ab64456bbf28645 Signed-off-by: Neale Ranns <nranns@cisco.com>