summaryrefslogtreecommitdiffstats
path: root/src/vnet/lisp-gpe
AgeCommit message (Collapse)AuthorFilesLines
2017-05-26LISP: do not try to delete paths when fwd entry is negativeFilip Tehlar1-4/+7
Change-Id: I50a0cbc7d8ecc94ad494df4720bb4199673e9793 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-05-22LISP-GPE: add dump call for VNIs in useFilip Tehlar5-1/+74
Change-Id: I394af7c1ac9fd0177ff5d298e4008245df54b436 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-05-19Enforce Bridge Domain ID range to match 24-bit VNI rangeJohn Lo1-0/+6
Enforce bridge domain ID range to allow a maximum value of 16M which matches the range of 24-bit VNI used for virtual overlay network ID. Fix "show bridge-domain" output to allow full 16M BD ID range to be displayed using 8-digit spaces. Change-Id: I80d9c76ea7c001bcccd3c19df1f3e55d2970f01c Signed-off-by: John Lo <loj@cisco.com>
2017-05-10completelly deprecate os_get_cpu_number, replace new occurencesDamjan Marion1-1/+1
Change-Id: I82c663bc0866c6c68ba354104b0bb059387f4b9d Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-05-07Remove L2 GPE interface from bridge when deleting, VPP-833Florin Coras1-0/+6
Change-Id: I32725006e9235a02cada5b0ad8974bfc4274339f Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-04-25"autoreply" flag: autogenerate standard xxx_reply_t messagesDave Barach1-44/+4
Change-Id: I72298aaae7d172082ece3a8edea4217c11b28d79 Signed-off-by: Dave Barach <dave@barachs.net>
2017-04-24BD:unify bridge domain creation codeEyal Bari1-4/+3
Change-Id: I29082e7a0c556069180a157e55b3698cf8cd38c7 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-04-13Remove unsed parameter from fib_table_entry_special_add() (only used in FIB ↵Neale Ranns1-2/+1
tests). The DPO was incorrectly initialised with FIB_PROTO_MAX Change-Id: I962df9e162e4dfb6837a5ce79ea795d5ff2d7315 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-13LISP: make statistics thread safeFilip Tehlar5-41/+65
Change-Id: I056dc6246f79d887d69ad459a6b8b3092a099baa Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-04-07MPLS McastNeale Ranns1-0/+1
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-07Fix gpe dp args to allow for 32 bit bridge domain ids, VPP-690Florin Coras1-1/+1
Change-Id: I4e3df197eed33acbceaff495279def8716773303 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-04-06Use thread local storage for thread indexDamjan Marion1-8/+8
This patch deprecates stack-based thread identification, Also removes requirement that thread stacks are adjacent. Finally, possibly annoying for some folks, it renames all occurences of cpu_index and cpu_number with thread index. Using word "cpu" is misleading here as thread can be migrated ti different CPU, and also it is not related to linux cpu index. Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-05LISP: fix crash when adding a negative forwarding entry, VPP-681Filip Tehlar1-15/+14
Change-Id: I190696da5555c05074ee0eee32eb914bd16e38fb Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-04-03Adjacency layout change and move to vnet/adjNeale Ranns1-2/+2
Change-Id: I03195a86c69f84a301051c6b3ab64456bbf28645 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-29LISP: fix IID in decapFilip Tehlar2-3/+4
Change-Id: I3f67d32d5d76069a27176deef6cba0c1a194b7ec Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-03-22LISP: improve DP speedFilip Tehlar3-4/+28
Change-Id: I5bd0721b70dfc240fa9225df3704774f6b0ede81 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-03-21LISP statisticsFilip Tehlar5-22/+199
Change-Id: I399cac46d279e020ba33459ef759d9d29d3ac716 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-03-08LISP: fix gpe sub-interface lookupFilip Tehlar1-8/+8
Change-Id: I080b90a4bc53c2595ade696c592e86790c7ca939 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-03-02Fix LISP Coverity warningFlorin Coras1-1/+1
Change-Id: Id1c3832609859ed004bacba0ced0d07dafd6c409 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-03-02VPP-648: CLI Memory leak with invalid parameterBilly McFall1-1/+1
After VPP-635 was merged, did one more pass. While the code was waiting to be merged, a few changes were merged to master with the same issue. This is a few additional changes addressing the same issue. See VPP-635. Change-Id: I7abeac5c260c1e2e9d9d318fd1aae24cd6932efc Signed-off-by: Billy McFall <bmcfall@redhat.com>
2017-03-01VPP-598: tcp stack initial commitDave Barach3-2/+6
Change-Id: I49e5ce0aae6e4ff634024387ceaf7dbc432a0351 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-02-27Add GPE CLI/API for setting encap modeFilip Tehlar6-3/+202
Change-Id: Id89e23fb5d275572b2356c073dfa0f55719e1a76 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-02-25Add NSH to GPE decap pathFlorin Coras5-20/+56
Change-Id: I97681322fa9ca81736100b4d32eab84868886c7b Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-02-22VPP-635: CLI Memory leak with invalid parameterBilly McFall2-13/+58
In the CLI parsing, below is a common pattern: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else return clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); } unformat_free (line_input); The 'else' returns if an unknown string is encountered. There a memory leak because the 'unformat_free(line_input)' is not called. There is a large number of instances of this pattern. Replaced the previous pattern with: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else { error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); goto done: } } /* ...Remaining code... */ done: unformat_free (line_input); return error; } In multiple files, 'unformat_free (line_input);' was never called, so there was a memory leak whether an invalid string was entered or not. Also, there were multiple instance where: error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); used 'input' as the last parameter instead of 'line_input'. The result is that output did not contain the substring in error, instead just an empty string. Fixed all of those as well. There are a lot of file, and very mind numbing work, so tried to keep it to a pattern to avoid mistakes. Change-Id: I8902f0c32a47dd7fb3bb3471a89818571702f1d2 Signed-off-by: Billy McFall <bmcfall@redhat.com> Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-21Rename LISP GPE API to GPEFilip Tehlar9-91/+86
Change-Id: I133c55bce46d40ffddabbbf8626cbd3d072522d4 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-02-16Add NSH load-balance and drop DPOFlorin Coras1-4/+4
Also adds missing gpe nsh address type functions. Change-Id: I3353a23c0518da9ce3b221ddf8c5bd0364930154 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-02-16Fix NSH-LISP interface additionFlorin Coras1-15/+16
Change-Id: I3925d2ebb2d26c676fc61f118d25bdf7fd522f26 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-02-14Fix coverity issues: ioamShwetha Bhandari1-5/+6
Change-Id: I0963760a7da95612d5cab19596919b369a4d0f8e Signed-off-by: Shwetha Bhandari <shwethab@cisco.com>
2017-02-13Basic support for LISP-GPE encapsulated NSH packetsFlorin Coras6-12/+543
Change-Id: I97fedb0f70dd18ed9bbe985407cc5fe714e8a2e2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-01-30LISP: add dump calls for GPE entries APIFilip Tehlar4-0/+248
Change-Id: Ie7f51643fd3522a0fa8df8d0309305481c211f5f Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-01-16Fix LISP coverity warningFlorin Coras1-0/+1
- uninitialized field in locator pair Change-Id: I6832eaf5217eaad8f0fa8da1801aa31465c1f37d Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-01-13LISP: Fix gpe APIFilip Tehlar4-135/+79
Change-Id: Iba076fc13e3f870c49fc5ca971dc7b8799188a27 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion20-0/+6410
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>