aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/mfib/mfib_entry.c
AgeCommit message (Collapse)AuthorFilesLines
2018-12-18MFIB: recurse resolution through an MFIB entryNeale Ranns1-123/+300
Change-Id: I8dc261e40b8398c5c8ab6bb69ecebbd0176055d9 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-23c11 safe string handling supportDave Barach1-1/+1
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-16FIB: use vlib-log for debuggingNeale Ranns1-20/+12
Change-Id: I9052202b8cbcf656e61d635253d515f0f3a8d145 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-01mroute routers in the stats segmentNeale Ranns1-0/+10
Change-Id: I798e4fb6470ae9e763f8de1c290ff0fc3c0b7f9e Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-17IP mcast: allow unicast address as a next-hopNeale Ranns1-27/+39
Change-Id: I5e679f2601e37688f2768620479dc2efb7d19ca3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-12Stats for Multicast FIBNeale Ranns1-0/+10
Change-Id: I46b4aeb6ec9ab6ee462f9c5074b5778d94bf8dc3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-26FIB: store the node type not the function pointer.Neale Ranns1-2/+0
Saves memory at no appreciable performance cost. before: DBGvpp# sh fib mem FIB memory Name Size in-use /allocated totals Entry 80 7 / 150 560/12000 after: DBGvpp# sh fib mem FIB memory Name Size in-use /allocated totals Entry 72 7 / 7 504/504 Change-Id: Ic5d3920ceb57b54260dc9af2078c26484335fef1 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-09BIERNeale Ranns1-1/+2
- see draft-ietf-bier-mpls-encapsulation-10 - midpoint, head and tail functions - supported payload protocols; IPv4 and IPv6 only. Change-Id: I59d7363bb6fdfdce8e4016a68a9c8f5a5e5791cb Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-11FIB table add/delete APINeale Ranns1-0/+11
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-29Fix for bootstrap crash when VPP compiled with gcc-7Marco Varlese1-1/+1
See issue VPP-964 Change-Id: I2aed5abdc02e47e7bb5b0ce78cb6589a1ce7302f Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2017-08-08L2 over MPLSNeale Ranns1-6/+4
[support for VPWS/VPLS] - switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths - VLIB nodes to handle pop/push of MPLS labels to L2 Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-06-01IP Mcast - recalculate on interface up/dowmNeale Ranns1-56/+77
Change-Id: Ie5b88fd7187ed62218a2e4e0e493c33e3e9ecc2f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-23ARP/ND entries for the same address on different interfaces (VPP-848)Neale Ranns1-4/+4
there are, intentionally, no validation checks in the ARP/ND code to prevent an ARP/ND entry from being installed for an address that is not local to the interface's sub-net. This is ok, since the adjacency/FIB code is designed to handle this case using the 'refinement' criteria - i.e. only installing a FIB entry for the address if the address 'refines' (i.e. is more specific than) the interface's sub-net. However, the refinement criteria currently operates on the FIB entry's prefix (which is a /32, so on the address) and not on the next-hop in the path. So, enter multiple ARP entries for the same address on different links, and this refinement criteria uses only the last added path, and so will remove the FIB entry should the ARP entries be added in the 'wrong' order. This fix updates the refinement criteria to work on each path of the FIB entry. The entry is installed if one of the paths refines the covers and only paths refining the cover contribute forwarding. Per-path refinement checks are stored in path-extensions. The patch is rather large as path-extension, which were previously used only for out-going MPLS labels, have been generalized. Change-Id: I00be359148cb948c32c52109e832a70537a7920a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-02Allow local/for-us replications for IP multicast routes on the CLINeale Ranns1-4/+2
Change-Id: I046d9402b79fdbc6a6663199ffff8e40a278fd51 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-07MPLS McastNeale Ranns1-142/+253
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-25MFIB: changes to improve route add/delete performanceNeale Ranns1-1/+8
Change-Id: I063d85200d12b09545ae1c373c7fc69112ae3b34 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-24MFIB memory leak. free the per-source interface hashNeale Ranns1-0/+2
Change-Id: I0ccb337eb0ed50ccc64193533cd816f6e36e6db5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-20Python test IP and MPLS objects conform to infra.Neale Ranns1-1/+7
Add IP[46] MFIB dump. Change-Id: I4a2821f65e67a5416b291e4912c84f64989883b8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-13Basic support for LISP-GPE encapsulated NSH packetsFlorin Coras1-0/+1
Change-Id: I97fedb0f70dd18ed9bbe985407cc5fe714e8a2e2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-02-09Improve MFIB doxygen helpNeale Ranns1-0/+4
Change-Id: Ie490b7fd5238cbad23f0199161cc14324fd9c554 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-02Fix SR multicast post mfib commitNeale Ranns1-16/+74
1 - use the SR policy to construct the replicate DPO. Each bucket therein is a SR tunnel. 2 - install a special mfib entry that links via this replicate 3 - forwarding is now mfib-lookup -> replicate -> sr_rewrite (per-tunnel) no need for a separate sr_replicate node. 4 - Stack the sr tunnel on the forwarding DPO of the first-hop FIB entry. no need for a second lookup post SR encap. 5 - fix some path-list lock leaks in the MFIB entry. Change-Id: I20de96ea4c4be4fae252625bde159d9c435c8315 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-27IP Multicast FIB (mfib)Neale Ranns1-0/+1096
- IPv[46] mfib tables with support for (*,G/m), (*,G) and (S,G) exact and longest prefix match - Replication represented via a new replicate DPO. - RPF configuration and data-plane checking - data-plane signals sent to listening control planes. The functions of multicast forwarding entries differ from their unicast conterparts, so we introduce a new mfib_table_t and mfib_entry_t objects. However, we re-use the fib_path_list to resolve and build the entry's output list. the fib_path_list provides the service to construct a replicate DPO for multicast. 'make tests' is added to with two new suites; TEST=mfib, this is invocation of the CLI command 'test mfib' which deals with many path add/remove, flag set/unset scenarios, TEST=ip-mcast, data-plane forwarding tests. Updated applications to use the new MIFB functions; - IPv6 NS/RA. - DHCPv6 unit tests for these are undated accordingly. Change-Id: I49ec37b01f1b170335a5697541c8fd30e6d3a961 Signed-off-by: Neale Ranns <nranns@cisco.com>