summaryrefslogtreecommitdiffstats
path: root/src/vnet/mfib/mfib_table.h
AgeCommit message (Collapse)AuthorFilesLines
2019-11-26fib: Table ReplaceNeale Ranns1-2/+88
Type: feature from the API doc, a table replace is: " The use-case is that, for some unspecified reason, the control plane has a very different set of entries it wants in the table than VPP currently has. The CP would thus like to 'replace' VPP's current table only by specifying what the new set of entries shall be, i.e. it is not going to delete anything that already eixts. the CP delcartes the start of this procedure with this begin_replace API Call, and when it has populated all the entries it wants, it calls the below end_replace API. From this point on it is of coursce free to add and delete entries as usual. The underlying mechanism by which VPP implements this replace is purposefully left unspecified. " In the FIB, the algorithm is implemented using mark and sweep. Algorithm goes: 1) replace_begin: this marks all the entries in that table as 'stale' 2) download all the entries that should be in this table - this clears the stale flag on those entries 3) signal the table converged: ip_table_replace_end - this removes all entries that are still stale this procedure can be used when an agent first connects to VPP, as an alternative to dump and diff state reconciliation. Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-18fib: fib api updatesNeale Ranns1-2/+23
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-12-20FIB: encode the label stack in the FIB path during table dumpNeale Ranns1-0/+15
Change-Id: I28e8a99b980ad343a4209e673201791b91ceab4e Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-12-18MFIB: recurse resolution through an MFIB entryNeale Ranns1-0/+23
Change-Id: I8dc261e40b8398c5c8ab6bb69ecebbd0176055d9 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-05-04Harmonize vec/pool_get_aligned object sizes and alignment requestsDave Barach1-0/+5
Object sizes must evenly divide alignment requests, or vice versa. Otherwise, only the first object will be aligned as requested. Three choices: add CLIB_CACHE_LINE_ALIGN_MARK(align_me) at the end of structures, manually pad to an even divisor or multiple of the alignment request, or use plain vectors/pools. static assert for enforcement. Change-Id: I41aa6ff1a58267301d32aaf4b9cd24678ac1c147 Signed-off-by: Dave Barach <dbarach@cisco.com>
2017-11-29Include allocated table memory in 'sh fib mem' outputNeale Ranns1-0/+4
DBGvpp# sh fib mem FIB memory Tables: SAFI Number Bytes IPv4 unicast 2 673066 IPv6 unicast 2 1054608 MPLS 1 4194312 IPv4 multicast 2 2322 IPv6 multicast 2 ??? Nodes: Name Size in-use /allocated totals Entry 96 20 / 20 1920/1920 Entry Source 32 0 / 0 0/0 Entry Path-Extensions 60 0 / 0 0/0 multicast-Entry 192 12 / 12 2304/2304 Path-list 40 28 / 28 1120/1120 uRPF-list 16 20 / 20 320/320 Path 72 28 / 28 2016/2016 Node-list elements 20 28 / 28 560/560 Node-list heads 8 30 / 30 240/240 Change-Id: I8c8f6f1c87502a40265bf4f302d0daef111a4a4e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-15Revert "Enforce FIB table creation before use"Florin Coras1-0/+1
This reverts commit f9342023c19887da656133e2688a90d70383b0c5. Reverting to unblock master. No idea why jjb +1ed this patch! On closer inspection it looks like it -1ed it and subsequently changed opinion. CSIT tests should be fixed before re-merging. Change-Id: I26608912a962c52083073e16c7c9d2cc44a3cc8d Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-13Enforce FIB table creation before useNeale Ranns1-1/+0
last i the serise of the use of the FIB table create/delete API. VPP now forces the tables to have been explicitly creted before they are used. Change-Id: Ifde3b1bbb76697a01ab71bce4f5264e6d1725467 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-04[aarch64] Fixes CLI crashes on dpaa2 platform.Christophe Fontaine1-1/+1
- always use 'va_args' as pointer in all format_* functions - u32 for all 'indent' params as it's declaration was inconsistent Change-Id: Ic5799309a6b104c9b50fec309cba789c8da99e79 Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
2017-09-13Add a name to the creation of an IP and MPLS tableNeale Ranns1-0/+25
Change-Id: I4b4648831551519b2ffb6f93255d28a4b8726c22 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-11FIB table add/delete APINeale Ranns1-5/+24
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-04-07MPLS McastNeale Ranns1-0/+1
1 - interface-DPO Used in the Data-plane to change a packet's input interface 2 - MPLS multicast FIB entry Same as a unicast entry but it links to a replicate not a load-balance DPO 3 - Multicast MPLS tunnel Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to . 4 - Resolve a path via a local label (of an mLDP LSP) For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP. 5 - MPLS disposition path sets RPF-ID For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet. 6 - RPF check with per-entry RPF-ID An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface. Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-20Python test IP and MPLS objects conform to infra.Neale Ranns1-0/+16
Add IP[46] MFIB dump. Change-Id: I4a2821f65e67a5416b291e4912c84f64989883b8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-02Fix SR multicast post mfib commitNeale Ranns1-0/+32
1 - use the SR policy to construct the replicate DPO. Each bucket therein is a SR tunnel. 2 - install a special mfib entry that links via this replicate 3 - forwarding is now mfib-lookup -> replicate -> sr_rewrite (per-tunnel) no need for a separate sr_replicate node. 4 - Stack the sr tunnel on the forwarding DPO of the first-hop FIB entry. no need for a second lookup post SR encap. 5 - fix some path-list lock leaks in the MFIB entry. Change-Id: I20de96ea4c4be4fae252625bde159d9c435c8315 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-01-27IP Multicast FIB (mfib)Neale Ranns1-0/+331
- IPv[46] mfib tables with support for (*,G/m), (*,G) and (S,G) exact and longest prefix match - Replication represented via a new replicate DPO. - RPF configuration and data-plane checking - data-plane signals sent to listening control planes. The functions of multicast forwarding entries differ from their unicast conterparts, so we introduce a new mfib_table_t and mfib_entry_t objects. However, we re-use the fib_path_list to resolve and build the entry's output list. the fib_path_list provides the service to construct a replicate DPO for multicast. 'make tests' is added to with two new suites; TEST=mfib, this is invocation of the CLI command 'test mfib' which deals with many path add/remove, flag set/unset scenarios, TEST=ip-mcast, data-plane forwarding tests. Updated applications to use the new MIFB functions; - IPv6 NS/RA. - DHCPv6 unit tests for these are undated accordingly. Change-Id: I49ec37b01f1b170335a5697541c8fd30e6d3a961 Signed-off-by: Neale Ranns <nranns@cisco.com>