aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/mfib
AgeCommit message (Collapse)AuthorFilesLines
2022-01-09fib: multiple memory leaks upon deleting a VRF tableSteven Luong2-15/+23
fib_table->ft_locks name string for parsing the ip table add|del name <tag> command path list for ip4_specials in mfib mfib->fib_entry_by_dst_address[0..32] mfib entry path_ext, msrc->mfes_exts Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Ia1e0cac577a73608ee1e4b1664b60a66322e81ce
2021-12-21fib: MPLS EOS chains built for attached prefixes should link to a lookup DPONeale Ranns1-1/+4
Type: fix Presently a local label associated with an attached or connected prefix will link to the glean. This is a problem since it will never use the adj-fibs that are installed for that attached prefix. Instead link the local label to a lookup in the table in which the attached link is bound. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Iad49fb6168b9ba47216a9a52bd262363b49c3c43
2021-10-21fib: respect mfib entry flags on create with pathsPaul Atkins5-3/+15
When an mfib entry was created with both paths and entry_flags then the entry flags were being ignored. If there are no paths then the flags were passed into mfib_table_entry_update, but in the case where the entry didn't exist and there were paths and flags, the entry was created within mfib_table_entry_paths_update() which used a default of MFIB_ENTRY_FLAG_NONE. Pass the flags through into the mfib_table_entry_paths_update fn. All existing callers other than the create case will now pass in MFIB_ENTRY_FLAG_NONE. Type: fix Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: I256375ba2fa863a62a88474ce1ea6bf2accdd456
2021-10-12fib: fix the drop counter for ipv6 RPF failuresNeale Ranns1-24/+24
Type: fix the only change to the mfib forwarding node is to set the error code, the rest is checkstyle formatting. The traces previously showed some bogus reason: 00:04:27:325550: ip6-mfib-forward-rpf entry 10 itf -1 flags 00:04:27:325551: ip6-drop fib:0 adj:10 flow:0 UDP: fe80::b203:eaff:fe02:604 -> ff02::1:2 tos 0x00, flow label 0x651ed, hop limit 1, payload length 64 UDP: 546 -> 547 length 64, checksum 0xec9a 00:04:27:325551: error-drop rx:GigabitEthernet6/0/0 00:04:27:325553: drop ip6-input: drops due to concurrent reassemblies limit Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I294684c36edc346b4ebdd83ba66888b3b2197704
2021-10-11ip: fix fib and mfib locksNathan Skrzypczak1-15/+19
This patches fixes an issue that could cause fib locks to underflow: if an API user deletes a fib and quickly recreates it, the fib may not have been actually deleted. As a result, the lock would not be incremented on the create call leading to the fib potentially disappearing afterwards - or to the lock to underflow when the fib is deleted again. In order to keep the existing API semantics, we use the locks with API and CLI source as flags. This means we need to use a different counter for the interface-related locks. This also prevents an issue where an interface being bound to a vrf via API and released via CLI could mess up the lock counter. Finally, this will help with cleaning up the interface-related locks on interface deletion in a later patch. Type: fix Change-Id: I93030a7660646d6dd179ddf27fe4e708aa11b90e Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com> Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
2021-09-30fib: doc nitfixesNathan Skrzypczak4-12/+12
Type: improvement Change-Id: I29346c849a5e1ff3c2ea399671f9f50d075e9f18 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-09-13interface: fix init fib_index_by_sw_if_indexNathan Skrzypczak2-2/+0
Type: fix The init of fib_index_by_sw_if_index wasn't setting default value to 0. Which we now need for setting interfaces unnumbered Change-Id: Ie5be9b5e5373ef055557a871ad4d1c45fbfc1dee Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-07-13misc: remove vnet_all_api_h and vnet_msg_enumFilip Tehlar1-16/+0
These file are no longer needed Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I34f8e0b7e17d9e8c06dcd6c5ffe51aa273cdec07
2021-05-26fib: During the mfib lookup set the unicast FIB index in the packet so that ↵Neale Ranns1-26/+28
a uRPF check on a for-us packet is done in the correct VRF Type: fix Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Iafa6efea0d96962aa9136dccefc148a961f74476
2020-12-14misc: refactor clib_bitmap_foreach macroDamjan Marion1-3/+3
Type: refactor Change-Id: I077110e1a422722e20aa546a6f3224c06ab0cde5 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-12-14misc: move to new pool_foreach macrosDamjan Marion4-15/+15
Type: refactor Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-12-14api: add missing version infoPaul Vinciguerra1-1/+2
Type: fix Change-Id: I269214e3eae72e837f25ee61d714556d976d410f Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-11-26fib: Expressive type for walk return code. Honour code.Neale Ranns1-3/+2
Type: improvement Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: I487e698555545fce85d02d55deaaf7bb0007e388
2020-11-16fib: increase the reference counter size for mfib to 32 bitsMiklos Tirpak1-1/+1
The 16 bits counter size limits the number of interfaces to 65K which is too low for certain use cases. GTP-U for example creates a new interface for every tunnel. This change makes the mfib reference counter size inline with the fib one. Type: fix Signed-off-by: Miklos Tirpak <miklos.tirpak@gmail.com> Change-Id: I9354367484f3232fc5a770f2df7e0959e22e626f
2020-10-28misc: Break the big IP header files to improve compile timeNeale Ranns1-0/+1
Type: refactor Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: Id1801519638a9b97175847d7ed58824fb83433d6
2020-10-21ip: convert u32 entry_flags to vl_api_mfib_entry_flags_t on mroute APINeale Ranns3-2/+34
Type: fix This is not an API change, it's the same values, just a different named type. also use VppEnum values in tests Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I3a18b529514f3cc9467ae4e8ac3e88d067fc776b
2020-10-19ip: Move the IP6 fib into ip6_[m]fib.cNeale Ranns2-7/+54
Type: improvement reduce the compile time by moving the bihash includes out of ip[46].h Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I6b9216e10aff1013071f9238b3e1ebbdd205bd80
2020-10-08fib: Register multicast MAC with interface for accepting interfacesNeale Ranns3-2/+134
Type: fix Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ic6c76b65e2dcc08916373153944507a297c962c0
2020-04-16fib: fix use-after-freeBenoît Ganne1-10/+11
Type: fix Change-Id: Ie7081d977dd0d3e7d09bc0d1b4d53863288e443b Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-03-17fib: Always install all routers mcast addressesNeale Ranns3-29/+89
Type: improvement Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ia8dff15855a81cf29729bdaa3ff28fbe3254fa97
2019-12-16vppinfra: bihash walk cb typedef and continue/stop controlsNeale Ranns1-1/+2
Type: feature Change-Id: I28f7a658be3f3beec9ea32635b60d1d3a10d9b06 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-26fib: Table ReplaceNeale Ranns8-25/+321
Type: feature from the API doc, a table replace is: " The use-case is that, for some unspecified reason, the control plane has a very different set of entries it wants in the table than VPP currently has. The CP would thus like to 'replace' VPP's current table only by specifying what the new set of entries shall be, i.e. it is not going to delete anything that already eixts. the CP delcartes the start of this procedure with this begin_replace API Call, and when it has populated all the entries it wants, it calls the below end_replace API. From this point on it is of coursce free to add and delete entries as usual. The underlying mechanism by which VPP implements this replace is purposefully left unspecified. " In the FIB, the algorithm is implemented using mark and sweep. Algorithm goes: 1) replace_begin: this marks all the entries in that table as 'stale' 2) download all the entries that should be in this table - this clears the stale flag on those entries 3) signal the table converged: ip_table_replace_end - this removes all entries that are still stale this procedure can be used when an agent first connects to VPP, as an alternative to dump and diff state reconciliation. Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-09-25fib: fix some typos in fib/mtrieLijian.Zhang1-1/+1
Type: fix Change-Id: I1af0e4a9bc23a3b6b6d3a74df093801ab6cae1f8 Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
2019-08-20vppapigen: remove support for legacy typedefsPaul Vinciguerra1-1/+1
vppapigen has remapped legacy to typedefs behind the scenes for some time now. - update .api files to use new style typedefs. - issue error on 'typeonly define' in .api files - remove unneeded macros redefining vl_noop_handler Type: refactor Change-Id: I7a8c4a6dafacee6a131f95cd0e9b03a8c60dea8b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-07-02fib: Coverity fix to remove dead codeNeale Ranns1-2/+0
Type: fix Change-Id: I678f523f058165030572d9cd395802b772db9ed7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-18fib: fib api updatesNeale Ranns8-142/+414
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-05In ip6_mfib_forward_rpf_node,is_v4 should be 0.mu.duojiao1-1/+1
Change-Id: I9de63cebfcef8898d0ea4c9c2b7451b168b06c2c Signed-off-by: mu.duojiao <mu.duojiao@zte.com.cn>
2019-05-30FIB: correctly report IPv6 FIB Unicast and Multicast memory usage (VPP-1578)"Neale Ranns2-3/+8
and document scaling Change-Id: I65d8999e65616d77e525963c770d91e9b0d5e593 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-04-08fixing typosJim Thompson1-1/+1
Change-Id: I215e1e0208a073db80ec6f87695d734cf40fabe3 Signed-off-by: Jim Thompson <jim@netgate.com>
2019-03-11mfib: migrate old MULTIARCH macros to VLIB_NODE_FNFilip Tehlar1-29/+9
Change-Id: I7114cd55ce1fc320d17b36cab731546fe4c58a72 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-01-07VOM: mroutesNeale Ranns1-0/+13
- fixes in ip.api for dumping mroute path flags Change-Id: I13b0cfb15d374250ed71bd4e13dda9b798c18204 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-12-21MFIB: coverity fixesNeale Ranns2-7/+16
Change-Id: I5c1bc498f7299e175070eb288e40f8d037c9be3a Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-12-20FIB: encode the label stack in the FIB path during table dumpNeale Ranns3-3/+30
Change-Id: I28e8a99b980ad343a4209e673201791b91ceab4e Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-12-18MFIB: recurse resolution through an MFIB entryNeale Ranns17-157/+1492
Change-Id: I8dc261e40b8398c5c8ab6bb69ecebbd0176055d9 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-12-16IP6-MFIB: replace the radix tree with bihash (VPP-1526)Neale Ranns4-123/+146
Change-Id: I7a48890c075826fbd8c75436dfdc5ffff230a693 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-12-06MFIB; CLI improvementsNeale Ranns1-1/+5
Change-Id: I7cf3ae8c10dd584e8bc234a3253bea3c5a2d105a Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-12-03move [m]fib and BIER tests to unittest pluginNeale Ranns1-1535/+0
Change-Id: I9d2f52e756363df011026773bfffa838a557313f Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-25Trivial: Cleanup missing va_ends.Paul Vinciguerra1-2/+2
Change-Id: Ie7827b6a31968a355687d27325c0f30cab1bc890 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-10-23c11 safe string handling supportDave Barach4-10/+10
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-19vppinfra: add atomic macros for __sync builtinsSirshak Das2-6/+6
This is first part of addition of atomic macros with only macros for __sync builtins. - Based on earlier patch by Damjan (https://gerrit.fd.io/r/#/c/10729/) Additionally - clib_atomic_release macro added and used in the absence of any memory barrier. - clib_atomic_bool_cmp_and_swap added Change-Id: Ie4e48c1e184a652018d1d0d87c4be80ddd180a3b Original-patch-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Sirshak Das <sirshak.das@arm.com> Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com> Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com> Reviewed-by: Steve Capper <steve.capper@arm.com>
2018-10-16FIB: use vlib-log for debuggingNeale Ranns1-20/+12
Change-Id: I9052202b8cbcf656e61d635253d515f0f3a8d145 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-10-01mroute routers in the stats segmentNeale Ranns2-0/+11
Change-Id: I798e4fb6470ae9e763f8de1c290ff0fc3c0b7f9e Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-19GRE: fix 4o6 and 6o4 adj stackingNeale Ranns1-17/+0
Change-Id: I13dc5eab8835c4f3b95906816d42dccfeee8b092 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-10vxlan-gbp: Add support for vxlan gbpMohsin Kazmi1-0/+2
This patch implements vxlan with extension of group based policy support. Change-Id: I70405bf7332c02867286da8958d9652837edd3c2 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-08-22IPIP and SIXRD tunnels create API needs table-IDs not fib-indexesNeale Ranns1-0/+2
Change-Id: Ifaef196a24fa9b6924f2b9692318f69763cee5e1 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-07-09IGMP improvementsNeale Ranns1-0/+2
- Enable/Disable an interface for IGMP - improve logging - refactor common code - no orphaned timers - IGMP state changes in main thread only - Large groups split over multiple state-change reports - SSM range configuration API. - more tests Change-Id: If5674f1044e7e97274a711f47807c9ba689d7b9a Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-05-04Harmonize vec/pool_get_aligned object sizes and alignment requestsDave Barach2-0/+10
Object sizes must evenly divide alignment requests, or vice versa. Otherwise, only the first object will be aligned as requested. Three choices: add CLIB_CACHE_LINE_ALIGN_MARK(align_me) at the end of structures, manually pad to an even divisor or multiple of the alignment request, or use plain vectors/pools. static assert for enforcement. Change-Id: I41aa6ff1a58267301d32aaf4b9cd24678ac1c147 Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-04-17IP mcast: allow unicast address as a next-hopNeale Ranns4-38/+279
Change-Id: I5e679f2601e37688f2768620479dc2efb7d19ca3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-20FIB Interpose SourceNeale Ranns1-203/+214
The interpose source allows the source/provider to insert/interpose a DPO in the forwarding chain of the FIB entry ahead of the forwarding provided by the next best source. For example if the API source (i.e the 'control plane') has provided an adjacency for forwarding, then an interpose source (e.g. a monitoring service) couold interpose a replicatte DPO to copy the traffic to another location AND forward using the API's adjacency. To use the interose feature an existing source (i.e FIB_SOURCE_PLUGIN_HI) cn specifiy as a flag FIB_ENTRY_FLAG_INTERPOSE and provide a DPO to interpose. One might also consider using interpose in conjunction with FIB_ENTRY_FLAG_COVER_INHERIT to ensure the interpose object affects all prefixes in the sub-tree. Change-Id: I8b2737b985f8f7c08123406d0491881def347b52 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-09MPLS Unifom modeNeale Ranns1-2/+4
- support both pipe and uniform modes for all MPLS LSP - all API programming for output-labels requires that the mode (and associated data) is specificed - API changes in MPLS, BIER and IP are involved - new DPO [sub] types for MPLS labels to handle the two modes. Change-Id: I87b76401e996f10dfbdbe4552ff6b19af958783c Signed-off-by: Neale Ranns <nranns@cisco.com>