Age | Commit message (Collapse) | Author | Files | Lines |
|
This allows a user creating MPLS tunnel through the bin_api to add a name tag. This is useful
to correlate the Tunnel with its use-case. Also useful if the user needs to recover the MPLS
Tunnel after a restart (mark-sweep).
Type: feature
Change-Id:
Signed-off-by: IJsbrand Wijnands <ice@cisco.com>
Change-Id: Idc080a63810a176ab090a2678a73d2cf9f7b523f
|
|
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I2272521d6e69edcd385ef684af6dd4eea5eaa953
|
|
The number of paths on the mpls tunnel returned through the bapi is
always zero. Doing a ntohl on a uint32 and poking it into a uint8 causes the problem.
Type: fix
Signed-off-by: IJsbrand Wijnands <ice@cisco.com>
Change-Id: I4135ad43a891e7818ca673c8067ef1f11cb34530
|
|
whole route
Type: fix
Fixes: 097fa66b
Change-Id: I017ab5797670eb278c27c6e306cd8cadaacddf9d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Enhance the route add/del APIs to take a set of paths rather than just one.
Most unicast routing protocols calcualte all the available paths in one
run of the algorithm so updating all the paths at once is beneficial for the client.
two knobs control the behaviour:
is_multipath - if set the the set of paths passed will be added to those
that already exist, otherwise the set will replace them.
is_add - add or remove the set
is_add=0, is_multipath=1 and an empty set, results in deleting the route.
It is also considerably faster to add multiple paths at once, than one at a time:
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11
100000 routes in .572240 secs, 174751.80 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12
100000 routes in .528383 secs, 189256.54 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13
100000 routes in .757131 secs, 132077.52 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14
100000 routes in .878317 secs, 113854.12 routes/sec
vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14
100000 routes in .900212 secs, 111084.93 routes/sec
Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
The current code only allowed access to the main thread error counters.
That is not so useful for a multi worker instance.
No return a vector indexed by thread of counter_t values.
Type: fix
Change-Id: Ie322c8889c0c8175e1116e71de04a2cf453b9ed7
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I215e1e0208a073db80ec6f87695d734cf40fabe3
Signed-off-by: Jim Thompson <jim@netgate.com>
|
|
Change-Id: I28e8a99b980ad343a4209e673201791b91ceab4e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Handles next_hop_weight, next_hop_preference and next_hop_table_id
properly in vl_api_mpls_tunnel_add_del_t_handler(). Also updated
vpp_api_test and custom_dump handling of related APIs.
Change-Id: I89e211bfa3b9d8ead396b24b3c46b7c7f6511f44
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I6c0d5aec6ee96a0d40358f0e09a0901b22265063
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I9d3d5243841d5b888f079e3ea5dc1e2e8befd1dc
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
route ADD API changed to return the stats segment index to use to read the counters
Change-Id: I2ef41e01eaa2f9cfaa49d9c88968897793825925
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- the FIB path takes a vector of type fib_mpls_label_t not u32 so the untype safe vec_add did not work
- write som eSR-MPLS tests
- allow an MPLS tunnel to resolve through a SR BSID
Change-Id: I2a18b9a9bf43584100ac269c4ebc286c9e3b3ea5
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I09b8406168df4b6b28df3ede24ee839681be0195
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I8f6fdbbeef2ac7e9fe5d87490ae5cba6e9a0b294
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- support both pipe and uniform modes for all MPLS LSP
- all API programming for output-labels requires that the mode (and associated data) is specificed
- API changes in MPLS, BIER and IP are involved
- new DPO [sub] types for MPLS labels to handle the two modes.
Change-Id: I87b76401e996f10dfbdbe4552ff6b19af958783c
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
forwarding provided by the source is pushed to all other entries
it covers in the sub-tree
Change-Id: I2a45222ef653358f55c2436de3e3c6353cfadba2
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This does not update api client code. In other words, if the client
assumes the transport is shmem based, this patch does not change that.
Furthermore, code that checks queue size, for tail dropping, is not
updated.
Done for the following apis:
Plugins
- acl
- gtpu
- memif
- nat
- pppoe
VNET
- bfd
- bier
- tapv2
- vhost user
- dhcp
- flow
- geneve
- ip
- punt
- ipsec/ipsec-gre
- l2
- l2tp
- lisp-cp/one-cp
- lisp-gpe
- map
- mpls
- policer
- session
- span
- udp
- tap
- vxlan/vxlan-gpe
- interface
VPP
- api/api.c
OAM
- oam_api.c
Stats
- stats.c
Change-Id: I0e33ecefb2bdab0295698c0add948068a5a83345
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- separate client/server code for both memory and socket apis
- separate memory api code from generic vlib api code
- move unix_shared_memory_fifo to svm and rename to svm_fifo_t
- overall declutter
Change-Id: I90cdd98ff74d0787d58825b914b0f1eafcfa4dc2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- makes the VAPI generated file more consumable.
- VOM build times improve.
Change-Id: I838488930bd23a0d3818adfdffdbca3eead382df
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
- see draft-ietf-bier-mpls-encapsulation-10
- midpoint, head and tail functions
- supported payload protocols; IPv4 and IPv6 only.
Change-Id: I59d7363bb6fdfdce8e4016a68a9c8f5a5e5791cb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
A UDP-encap object that particiapates in the FIB graph and contributes
DPO to teh output chain. It thereofre resembles a tunnel but without the
interface. FIB paths (and henace routes) can then be created to egress
through the UDP-encap. Said routes can have MPLS labels, hence this also
allows MPLSoUPD.
Encap is uni-directional. For decap, one still registers with the UDP port
dispatcher.
Change-Id: I23bd345523b20789a1de1b02022ea1148ca50797
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I5d5d4f22b6369d504455a644f73076d772fbcfb4
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
A distributed virtual router works by attmpeting to switch a packet, but on failing to find a local consumer (i.e. the packet is destined to a locally attached host) then the packet is sent unmodified 'upstream' to where the rest of the 'distributed' router is present. When L3 switching a packet this means the L2 header must not be modifed. This patch adds a 'l2-bridge' object to the L3 FIB which re-injects packets from the L3 path back into the L2 path - use with extreme caution.
Change-Id: I069724eb45956647d7980cbe40a80a788ee6ee82
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
177117: fstat() returns -1 on error; the code is
checking for any positive value instead
175142: final return could never be reached; simple
refactoring
175235,175236: Warning suppressed with an explicit
cast to (void)
174817: Final return couldn't be reached; is
is_in_order is 0 then 'rv' is already returned
above
172095,172093: If is_is_set does not get set to 1,
then return 0 has already been invoked
174405: Re-kill this (nothing sets rv)
171136: Looks like a cmd line flag to set test_bytes
was missing; added it, and refactored the
argc/argv processing to avoid two other
potential segv's
176813: Add range checking for term width/height.
First stab at a reasonable range is 1-512
for both.
175350: Fix implicit casting in shift operation
174272: Not a c+p error; try using a coverity
annotation to ignore it
174273,175320: Annotated FORWARD_NULL
Change-Id: I58d0f860fc2209f59f8d1b6b344d631b8d429ace
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
Change-Id: I4b4648831551519b2ffb6f93255d28a4b8726c22
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
part 2;
- this adds the code to create an IP and MPLS table via the API.
- but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass.
Change-Id: Id124d884ade6cb7da947225200e3bb193454c555
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I4b1f27b95d67d48b7a13750ff8754c344ed7afa7
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
commit only the addition of the .api definition and their invocation through VAT so CSIT can use it
Change-Id: Id510f14b1ce007fe5e92120507ea34100652fc64
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
[support for VPWS/VPLS]
- switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths
- VLIB nodes to handle pop/push of MPLS labels to L2
Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I655f41878ca3595681d0255782b0faba01c9824b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Paths are given a preference, lowest value is 'best'. Only paths that are up are up contribute to fprwarding - that's unchanged. What's new is that of the path's that re up only those that have the best preference contribute. A poor man's primary and backup. It's not true primary/backup function because the FIB must converge before the lower preference paths are used.
Change-Id: Ie4453c4a7b1094c6c2b51fe1594b8302103bb68e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
1 - interface-DPO
Used in the Data-plane to change a packet's input interface
2 - MPLS multicast FIB entry
Same as a unicast entry but it links to a replicate not a load-balance DPO
3 - Multicast MPLS tunnel
Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to .
4 - Resolve a path via a local label (of an mLDP LSP)
For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP.
5 - MPLS disposition path sets RPF-ID
For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet.
6 - RPF check with per-entry RPF-ID
An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface.
Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
1) 16-8-8 stride. Reduce trie depth walk traded with increased memory in the top PLY.
2) separate the vector of protocol-independent (PI) fib_table_t with the vector of protocol dependent (PD) FIBs. PD FIBs are large structures, we don't want to burn the memory for ech PD type
3) Go straight to the PD FIB in the data-path thus avoiding an indirection through, e.g., a PLY pool.
Change-Id: I800d1ed0b2049040d5da95213f3ed6b12bdd78b7
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Removed a fair number of "BUG" message handlers, due to conflicts with
actual message handlers in api_format.c. Vpp itself had no business
receiving certain messages, up to the point where we started building
in relevant code from vpp_api_test.
Eliminated all but one duplicate registration complaint. That one
needs attention from the vxlan team since the duplicated handlers have
diverged.
Change-Id: Iafce5429d2f906270643b4ea5f0130e20beb4d1d
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Ic5f273dae607a1d3902489e65734c76f027dc30f
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|