Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: Ibda19d786070c942c75016ab568c8361de2f24af
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- the FIB path takes a vector of type fib_mpls_label_t not u32 so the untype safe vec_add did not work
- write som eSR-MPLS tests
- allow an MPLS tunnel to resolve through a SR BSID
Change-Id: I2a18b9a9bf43584100ac269c4ebc286c9e3b3ea5
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I221cebddc45efbfdec428b7df2af96e2aedff2dd
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I7e6045514d58010258889cadd220b7efcef7c1b9
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
this is the same behaviour as other tunnel types
Change-Id: I6439f692bc2bc18f12eea599e0e06b9eaa5eb128
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I59235d11baac18785a4c90cdaf14e8f3ddf06dab
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I09b8406168df4b6b28df3ede24ee839681be0195
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I63c36644c9d93f2c3ec6606ca0205b407499de4e
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
with ip direct broadcast enable a packet to the interface's
subnet broadcast address with be sent L2 broadcast on the
interface. dissabled, it will be dropped. it is disabled by
default, which preserves current behaviour
Change-Id: If154cb92e64834e97a541b32624354348a0eafb3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Thanks to gcc-8 for highlighting this...
Change-Id: I53bfab631a40fd1b680c76a48b0307a33fa2b154
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This patch separates setting of hardware interfaec and software
interface MTU. Software MTU is L2 payload MTU (i.e. not including L2
header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set.
Currently only IP4, IP6 are enabled in adjacency / rewrite code.
Documentation in src/vnet/MTU.md
Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I565d79af410825c72f291ab40178883b1bc6f1df
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I008a4d7ad7160d1f07e7ceef712a5318a9368308
Signed-off-by: Andrey "Zed" Zaikin <zed.0xff@gmail.com>
|
|
Change-Id: I590945fdc1af53208c990a52bbecdc992fd27532
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: Ie5a50def4ec1e4a3b3404a8b6ab9ec248bc16744
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I8f6fdbbeef2ac7e9fe5d87490ae5cba6e9a0b294
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- support both pipe and uniform modes for all MPLS LSP
- all API programming for output-labels requires that the mode (and associated data) is specificed
- API changes in MPLS, BIER and IP are involved
- new DPO [sub] types for MPLS labels to handle the two modes.
Change-Id: I87b76401e996f10dfbdbe4552ff6b19af958783c
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
returned in the fixup function
Change-Id: I458e6e03b03e27775df33a2fd302743126d6ac44
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This is a version of the VPP API generator in Python PLY. It supports
the existing language, and has a plugin architecture for generators.
Currently C and JSON are supported.
Changes:
- vl_api_version to option version = "major.minor.patch"
- enum support
- Added error checking and reporting
- import support (removed the C pre-processor)
- services (tying request/reply together)
Version:
option version = "1.0.0";
Enum:
enum colours {
RED,
BLUE = 50,
};
define foo {
vl_api_colours_t colours;
};
Services:
service {
rpc foo returns foo_reply;
rpc foo_dump returns stream foo_details;
rpc want_stats returns want_stats_reply
events ip4_counters, ip6_counters;
};
Future planned features:
- unions
- bool, text
- array support (including length)
- proto3 output plugin
- Refactor C/C++ generator as a plugin
- Refactor Java generator as a plugin
Change-Id: Ifa289966c790e1b1a8e2938a91e69331e3a58bdf
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
forwarding provided by the source is pushed to all other entries
it covers in the sub-tree
Change-Id: I2a45222ef653358f55c2436de3e3c6353cfadba2
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This does not update api client code. In other words, if the client
assumes the transport is shmem based, this patch does not change that.
Furthermore, code that checks queue size, for tail dropping, is not
updated.
Done for the following apis:
Plugins
- acl
- gtpu
- memif
- nat
- pppoe
VNET
- bfd
- bier
- tapv2
- vhost user
- dhcp
- flow
- geneve
- ip
- punt
- ipsec/ipsec-gre
- l2
- l2tp
- lisp-cp/one-cp
- lisp-gpe
- map
- mpls
- policer
- session
- span
- udp
- tap
- vxlan/vxlan-gpe
- interface
VPP
- api/api.c
OAM
- oam_api.c
Stats
- stats.c
Change-Id: I0e33ecefb2bdab0295698c0add948068a5a83345
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- separate client/server code for both memory and socket apis
- separate memory api code from generic vlib api code
- move unix_shared_memory_fifo to svm and rename to svm_fifo_t
- overall declutter
Change-Id: I90cdd98ff74d0787d58825b914b0f1eafcfa4dc2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
CLI parsing code (unformat_fib_route_path) does not
recognise 'resolve-via-connected'.
However it understands 'resolve-via-attached'.
Change-Id: I57e5eb75199cb8ae72c0fc8642a41f042b022201
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
as decsribed in section 2.2
ihttps://tools.ietf.org/html/draft-ietf-bier-mpls-encapsulation-10
with BIFT encoding from:
https://tools.ietf.org/html/draft-wijnandsxu-bier-non-mpls-bift-encoding-00
changes:
1 - introduce the new BIFT lookup table. BIER tables that have an associated
MPLS label are added to the MPLS-FIB. Those that don't are added to the
BIER table
2 - BIER routes that have no associated output MPLS label will add a BIFT label.
3 - The BIER FMask has a path-list as a member to resolve via any possible path.
Change-Id: I1fd4d9dbd074f0e855c16e9329b81460ebe1efce
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I35e166feeb0ac1e0e570efe07cb5f4cbeb5b8670
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Saves memory at no appreciable performance cost.
before:
DBGvpp# sh fib mem
FIB memory
Name Size in-use /allocated totals
Entry 80 7 / 150 560/12000
after:
DBGvpp# sh fib mem
FIB memory
Name Size in-use /allocated totals
Entry 72 7 / 7 504/504
Change-Id: Ic5d3920ceb57b54260dc9af2078c26484335fef1
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I9eef6fb9d050552f0759080ea645b885d5b9cc12
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ia3d3d7a75282dc3073eaa83e49cef756db19874a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I32de25890ac0a643314f650591d2479879d9a2a6
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- makes the VAPI generated file more consumable.
- VOM build times improve.
Change-Id: I838488930bd23a0d3818adfdffdbca3eead382df
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
- see draft-ietf-bier-mpls-encapsulation-10
- midpoint, head and tail functions
- supported payload protocols; IPv4 and IPv6 only.
Change-Id: I59d7363bb6fdfdce8e4016a68a9c8f5a5e5791cb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
A UDP-encap object that particiapates in the FIB graph and contributes
DPO to teh output chain. It thereofre resembles a tunnel but without the
interface. FIB paths (and henace routes) can then be created to egress
through the UDP-encap. Said routes can have MPLS labels, hence this also
allows MPLSoUPD.
Encap is uni-directional. For decap, one still registers with the UDP port
dispatcher.
Change-Id: I23bd345523b20789a1de1b02022ea1148ca50797
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This reverts commit f9342023c19887da656133e2688a90d70383b0c5.
Reverting to unblock master. No idea why jjb +1ed this patch! On closer inspection it looks like it -1ed it and subsequently changed opinion. CSIT tests should be fixed before re-merging.
Change-Id: I26608912a962c52083073e16c7c9d2cc44a3cc8d
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I5d5d4f22b6369d504455a644f73076d772fbcfb4
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
last i the serise of the use of the FIB table create/delete API. VPP now forces the tables to have been explicitly creted before they are used.
Change-Id: Ifde3b1bbb76697a01ab71bce4f5264e6d1725467
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Add one of these statements to foo.api:
vl_api_version 1.2.3
to generate a version tuple stanza in foo.api.h:
/****** Version tuple *****/
vl_api_version_tuple(foo, 1, 2, 3)
Change-Id: Ic514439e4677999daa8463a94f948f76b132ff15
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
A distributed virtual router works by attmpeting to switch a packet, but on failing to find a local consumer (i.e. the packet is destined to a locally attached host) then the packet is sent unmodified 'upstream' to where the rest of the 'distributed' router is present. When L3 switching a packet this means the L2 header must not be modifed. This patch adds a 'l2-bridge' object to the L3 FIB which re-injects packets from the L3 path back into the L2 path - use with extreme caution.
Change-Id: I069724eb45956647d7980cbe40a80a788ee6ee82
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- always use 'va_args' as pointer in all format_* functions
- u32 for all 'indent' params as it's declaration was inconsistent
Change-Id: Ic5799309a6b104c9b50fec309cba789c8da99e79
Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
|
|
Change-Id: I1f3c0f879f636e587aa518c41e5ad99af65129a7
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
177117: fstat() returns -1 on error; the code is
checking for any positive value instead
175142: final return could never be reached; simple
refactoring
175235,175236: Warning suppressed with an explicit
cast to (void)
174817: Final return couldn't be reached; is
is_in_order is 0 then 'rv' is already returned
above
172095,172093: If is_is_set does not get set to 1,
then return 0 has already been invoked
174405: Re-kill this (nothing sets rv)
171136: Looks like a cmd line flag to set test_bytes
was missing; added it, and refactored the
argc/argv processing to avoid two other
potential segv's
176813: Add range checking for term width/height.
First stab at a reasonable range is 1-512
for both.
175350: Fix implicit casting in shift operation
174272: Not a c+p error; try using a coverity
annotation to ignore it
174273,175320: Annotated FORWARD_NULL
Change-Id: I58d0f860fc2209f59f8d1b6b344d631b8d429ace
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
Change-Id: I4b4648831551519b2ffb6f93255d28a4b8726c22
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I6cab79c266837a8731adcf78c9e093dfa6be0ead
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
part 2;
- this adds the code to create an IP and MPLS table via the API.
- but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass.
Change-Id: Id124d884ade6cb7da947225200e3bb193454c555
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I4b1f27b95d67d48b7a13750ff8754c344ed7afa7
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
commit only the addition of the .api definition and their invocation through VAT so CSIT can use it
Change-Id: Id510f14b1ce007fe5e92120507ea34100652fc64
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I675af62d9c0c9cf2e340bf19e902695861d4e4b5
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ib5af105e32b6b0df86923e189ab6bf6ee59de5b9
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
[support for VPWS/VPLS]
- switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths
- VLIB nodes to handle pop/push of MPLS labels to L2
Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I655f41878ca3595681d0255782b0faba01c9824b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Paths are given a preference, lowest value is 'best'. Only paths that are up are up contribute to fprwarding - that's unchanged. What's new is that of the path's that re up only those that have the best preference contribute. A poor man's primary and backup. It's not true primary/backup function because the FIB must converge before the lower preference paths are used.
Change-Id: Ie4453c4a7b1094c6c2b51fe1594b8302103bb68e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|