summaryrefslogtreecommitdiffstats
path: root/src/vnet/mpls
AgeCommit message (Collapse)AuthorFilesLines
2019-11-26fib: Table ReplaceNeale Ranns2-9/+0
Type: feature from the API doc, a table replace is: " The use-case is that, for some unspecified reason, the control plane has a very different set of entries it wants in the table than VPP currently has. The CP would thus like to 'replace' VPP's current table only by specifying what the new set of entries shall be, i.e. it is not going to delete anything that already eixts. the CP delcartes the start of this procedure with this begin_replace API Call, and when it has populated all the entries it wants, it calls the below end_replace API. From this point on it is of coursce free to add and delete entries as usual. The underlying mechanism by which VPP implements this replace is purposefully left unspecified. " In the FIB, the algorithm is implemented using mark and sweep. Algorithm goes: 1) replace_begin: this marks all the entries in that table as 'stale' 2) download all the entries that should be in this table - this clears the stale flag on those entries 3) signal the table converged: ip_table_replace_end - this removes all entries that are still stale this procedure can be used when an agent first connects to VPP, as an alternative to dump and diff state reconciliation. Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-11ip: functional interface to ip fragmentationOle Troan1-37/+181
This provides a functional interface to IP fragmentation. Allowing external features to fragment. Supports arbitrary encap size, for e.g. MPLS or inner fragmentation of tunnels. This also removed dual loop in MAP that was fundamentally broken. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Ia89ecec8ee3cbe2416edbe87630fdb714898c2a8 Signed-off-by: Ole Troan <ot@cisco.com>
2019-11-04mpls: number of mpls tunnel paths returns zeroIJsbrand Wijnands1-1/+1
The number of paths on the mpls tunnel returned through the bapi is always zero. Doing a ntohl on a uint32 and poking it into a uint8 causes the problem. Type: fix Signed-off-by: IJsbrand Wijnands <ice@cisco.com> Change-Id: I4135ad43a891e7818ca673c8067ef1f11cb34530
2019-10-09mpls: support fragmentation of mpls output packetRajesh Goel2-14/+57
Type: fix Signed-off-by: Rajesh Goel <rajegoel@cisco.com> Change-Id: Ie4372c5cf58ab215cdec5ce56f8a994daaba2844
2019-09-19api: split vl_api_prefix into twoOle Troan1-2/+1
One type for address with prefix and one type for prefix. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Icfec51d9b7d5cde1d69fbecdd97498688ab7b295 Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Klement Sekera <ksekera@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com>
2019-08-20vppapigen: remove support for legacy typedefsPaul Vinciguerra1-3/+3
vppapigen has remapped legacy to typedefs behind the scenes for some time now. - update .api files to use new style typedefs. - issue error on 'typeonly define' in .api files - remove unneeded macros redefining vl_noop_handler Type: refactor Change-Id: I7a8c4a6dafacee6a131f95cd0e9b03a8c60dea8b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-07-26dhcp ip: DSCP settings for transmitted DHCP packetsNeale Ranns1-4/+6
Type: feature - Define the ip_dscp_t and use in the IP headers - Add DSCP setting to the DHCP client for use with packet TX Change-Id: If220dde0017ea78793747d65f53e11daf23a28fa Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-03fib: allow route delete with no paths and multipath=0 to remove theNeale Ranns1-7/+7
whole route Type: fix Fixes: 097fa66b Change-Id: I017ab5797670eb278c27c6e306cd8cadaacddf9d Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-19mpls: fix header offset overflowBenoît Ganne1-3/+6
rw_len (MPLS rewrite string length) is declared as unsigned but is used as -rw_len with vlib_buffer_advance(), resulting in a wrong, huge offset. Type: fix Fixes: 734d430f37251bc7e71d507983ee640ae1625fbe Ticket: VPP-1705 Change-Id: I7357249f7e50b7d30fd61f5be4858a26e43df85d Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-06-18fib: fib api updatesNeale Ranns3-275/+220
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-30mpls: leverage vlib_buffer_advanceZhiyong Yang1-7/+4
Change-Id: I363a4444f4d296f04371acd65c702b1a1ce70913 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-05-22stats: support multiple works for error countersOle Troan1-7/+0
The current code only allowed access to the main thread error counters. That is not so useful for a multi worker instance. No return a vector indexed by thread of counter_t values. Type: fix Change-Id: Ie322c8889c0c8175e1116e71de04a2cf453b9ed7 Signed-off-by: Ole Troan <ot@cisco.com>
2019-05-16init / exit function orderingDave Barach1-11/+10
The vlib init function subsystem now supports a mix of procedural and formally-specified ordering constraints. We should eliminate procedural knowledge wherever possible. The following schemes are *roughly* equivalent: static clib_error_t *init_runs_first (vlib_main_t *vm) { clib_error_t *error; ... do some stuff... if ((error = vlib_call_init_function (init_runs_next))) return error; ... } VLIB_INIT_FUNCTION (init_runs_first); and static clib_error_t *init_runs_first (vlib_main_t *vm) { ... do some stuff... } VLIB_INIT_FUNCTION (init_runs_first) = { .runs_before = VLIB_INITS("init_runs_next"), }; The first form will [most likely] call "init_runs_next" on the spot. The second form means that "init_runs_first" runs before "init_runs_next," possibly much earlier in the sequence. Please DO NOT construct sets of init functions where A before B actually means A *right before* B. It's not necessary - simply combine A and B - and it leads to hugely annoying debugging exercises when trying to switch from ad-hoc procedural ordering constraints to formal ordering constraints. Change-Id: I5e4353503bf43b4acb11a45fb33c79a5ade8426c Signed-off-by: Dave Barach <dave@barachs.net>
2019-04-08fixing typosJim Thompson1-1/+1
Change-Id: I215e1e0208a073db80ec6f87695d734cf40fabe3 Signed-off-by: Jim Thompson <jim@netgate.com>
2019-04-08minor spelling errors (both in comments)Jim Thompson1-1/+1
Change-Id: I9282a838738d0ba54255bef347abf4735be29820 Signed-off-by: Jim Thompson <jim@netgate.com>
2019-03-07BIER: trace then drop. MPLS: trace the dropsNeale Ranns1-0/+43
Change-Id: I952e6aec6487270a79c4d92cfe828cc55d42d536 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-05mpls: migrate old MULTIARCH macros to VLIB_NODE_FNFilip Tehlar5-55/+24
Change-Id: I8c5f7cda655e3343d50a96d714796ea4255588b6 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-02-28MPLS: tunnel delete crashNeale Ranns1-0/+6
Change-Id: I4adf713f4a1d596b9c8a78b79b5df2c7eb0c56f0 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-02-14Add -fno-common compile optionBenoît Ganne1-1/+1
-fno-common makes sure we do not have multiple declarations of the same global symbol across compilation units. It helps debug nasty linkage bugs by guaranteeing that all reference to a global symbol use the same underlying object. It also helps avoiding benign mistakes such as declaring enum as global objects instead of types in headers (hence the minor fixes scattered across the source). Change-Id: I55c16406dc54ff8a6860238b90ca990fa6b179f1 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-01-30MPLS tunnel; fix crash when deleting non-existant pathNeale Ranns1-0/+3
in the case the tunnel is the only user of the shared path list then removing its dependency removes the path list. hence lock the list Change-Id: I18318441698ceac16715b1826266a7d19dcd76e1 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-25MPLS-tunnel: show output to display the tunnel name correctlyNeale Ranns1-1/+1
Change-Id: I1554d9a4d6e4a4007cda9d0f83b03feb8fdbe853 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-12-20FIB: encode the label stack in the FIB path during table dumpNeale Ranns1-1/+2
Change-Id: I28e8a99b980ad343a4209e673201791b91ceab4e Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-12-04MPLS: buffer over-run with incorrectly init'd vector. fix VAT dumpNeale Ranns1-1/+1
Change-Id: Ifdbb4c4cffd90c4ec8b39513d284ebf7be39eca5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-26Add a feature arc consistency checkDave Barach1-0/+2
Verify that last node in the computed feature order matches reality. This check doesn't make sense in all cases, so we skip it if the newly-added vnet_feature_arc_registration_t ".last_in_arc" datum is a NULL pointer. Change-Id: Ia99c3e2b2da2e4780a7d5bc71670c5742a66fef2 Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-23c11 safe string handling supportDave Barach3-7/+7
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-04Fix handling of mpls_tunnel_add_del APIJohn Lo1-2/+16
Handles next_hop_weight, next_hop_preference and next_hop_table_id properly in vl_api_mpls_tunnel_add_del_t_handler(). Also updated vpp_api_test and custom_dump handling of related APIs. Change-Id: I89e211bfa3b9d8ead396b24b3c46b7c7f6511f44 Signed-off-by: John Lo <loj@cisco.com>
2018-09-26MPLS tunnel dump: use sw_if_index not tunnel_indexNeale Ranns4-16/+33
Change-Id: I6c0d5aec6ee96a0d40358f0e09a0901b22265063 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-09-25MPLS tunnel dump fixNeale Ranns3-4/+8
Change-Id: I9d3d5243841d5b888f079e3ea5dc1e2e8befd1dc Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-09-24Trivial: Clean up some typos.Paul Vinciguerra1-1/+1
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-09-20Route counters in the stats segmentNeale Ranns2-30/+47
route ADD API changed to return the stats segment index to use to read the counters Change-Id: I2ef41e01eaa2f9cfaa49d9c88968897793825925 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-14BIER API and load-balancing fixesNeale Ranns1-0/+5
Change-Id: Ibda19d786070c942c75016ab568c8361de2f24af Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-08-30SR-MPLS: fixes and testsNeale Ranns2-0/+10
- the FIB path takes a vector of type fib_mpls_label_t not u32 so the untype safe vec_add did not work - write som eSR-MPLS tests - allow an MPLS tunnel to resolve through a SR BSID Change-Id: I2a18b9a9bf43584100ac269c4ebc286c9e3b3ea5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-08-29Consolidate table->index conversion in fib-path CLI processingNeale Ranns1-19/+0
Change-Id: I221cebddc45efbfdec428b7df2af96e2aedff2dd Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-08-27MPLS: allow 16 as a valid output labelNeale Ranns1-1/+1
Change-Id: I7e6045514d58010258889cadd220b7efcef7c1b9 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-08-24MPLS tunnel: don't reuse hw-indicesNeale Ranns1-27/+15
this is the same behaviour as other tunnel types Change-Id: I6439f692bc2bc18f12eea599e0e06b9eaa5eb128 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-08-03loop counter to prevent infiinte number of look ups per-packetNeale Ranns2-1/+9
Change-Id: I59235d11baac18785a4c90cdaf14e8f3ddf06dab Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-07-30FIB: return entry prefix by const reference to avoid the copyNeale Ranns1-9/+7
Change-Id: I09b8406168df4b6b28df3ede24ee839681be0195 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-07-23fix vector index range checksEyal Bari2-2/+2
Change-Id: I63c36644c9d93f2c3ec6606ca0205b407499de4e Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-07-20IP directed broadcastNeale Ranns1-0/+1
with ip direct broadcast enable a packet to the interface's subnet broadcast address with be sent L2 broadcast on the interface. dissabled, it will be dropped. it is disabled by default, which preserves current behaviour Change-Id: If154cb92e64834e97a541b32624354348a0eafb3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-06-26node functions cannot be always_inlineDamjan Marion1-1/+1
Thanks to gcc-8 for highlighting this... Change-Id: I53bfab631a40fd1b680c76a48b0307a33fa2b154 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-06-11MTU: Software interface / Per-protocol MTU supportOle Troan1-0/+3
This patch separates setting of hardware interfaec and software interface MTU. Software MTU is L2 payload MTU (i.e. not including L2 header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set. Currently only IP4, IP6 are enabled in adjacency / rewrite code. Documentation in src/vnet/MTU.md Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690 Signed-off-by: Ole Troan <ot@cisco.com>
2018-05-03MPLS prefetch fixesNeale Ranns2-15/+15
Change-Id: I565d79af410825c72f291ab40178883b1bc6f1df Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-18typo fix: UNKOWN -> UNKNOWNAndrey "Zed" Zaikin1-1/+1
Change-Id: I008a4d7ad7160d1f07e7ceef712a5318a9368308 Signed-off-by: Andrey "Zed" Zaikin <zed.0xff@gmail.com>
2018-03-19Coverity found bugs in recent MPLS changesNeale Ranns1-15/+6
Change-Id: I590945fdc1af53208c990a52bbecdc992fd27532 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-16QoS recording and markingNeale Ranns1-1/+4
Change-Id: Ie5a50def4ec1e4a3b3404a8b6ab9ec248bc16744 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-13Common form of fib-path reproting in dumpsNeale Ranns1-11/+2
Change-Id: I8f6fdbbeef2ac7e9fe5d87490ae5cba6e9a0b294 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-09MPLS Unifom modeNeale Ranns7-92/+84
- support both pipe and uniform modes for all MPLS LSP - all API programming for output-labels requires that the mode (and associated data) is specificed - API changes in MPLS, BIER and IP are involved - new DPO [sub] types for MPLS labels to handle the two modes. Change-Id: I87b76401e996f10dfbdbe4552ff6b19af958783c Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-01-30Allow the provider of a midchain adjacency to pass context data that is ↵Neale Ranns2-4/+13
returned in the fixup function Change-Id: I458e6e03b03e27775df33a2fd302743126d6ac44 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-01-23VPPAPIGEN: vppapigen replacement in Python PLY.Ole Troan1-1/+1
This is a version of the VPP API generator in Python PLY. It supports the existing language, and has a plugin architecture for generators. Currently C and JSON are supported. Changes: - vl_api_version to option version = "major.minor.patch" - enum support - Added error checking and reporting - import support (removed the C pre-processor) - services (tying request/reply together) Version: option version = "1.0.0"; Enum: enum colours { RED, BLUE = 50, }; define foo { vl_api_colours_t colours; }; Services: service { rpc foo returns foo_reply; rpc foo_dump returns stream foo_details; rpc want_stats returns want_stats_reply events ip4_counters, ip6_counters; }; Future planned features: - unions - bool, text - array support (including length) - proto3 output plugin - Refactor C/C++ generator as a plugin - Refactor Java generator as a plugin Change-Id: Ifa289966c790e1b1a8e2938a91e69331e3a58bdf Signed-off-by: Ole Troan <ot@cisco.com>
2018-01-18FIB Inherited SrouceNeale Ranns1-2/+2
forwarding provided by the source is pushed to all other entries it covers in the sub-tree Change-Id: I2a45222ef653358f55c2436de3e3c6353cfadba2 Signed-off-by: Neale Ranns <nranns@cisco.com>