summaryrefslogtreecommitdiffstats
path: root/src/vnet/mpls
AgeCommit message (Collapse)AuthorFilesLines
2018-07-23fix vector index range checksEyal Bari2-2/+2
Change-Id: I63c36644c9d93f2c3ec6606ca0205b407499de4e Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-07-20IP directed broadcastNeale Ranns1-0/+1
with ip direct broadcast enable a packet to the interface's subnet broadcast address with be sent L2 broadcast on the interface. dissabled, it will be dropped. it is disabled by default, which preserves current behaviour Change-Id: If154cb92e64834e97a541b32624354348a0eafb3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-06-26node functions cannot be always_inlineDamjan Marion1-1/+1
Thanks to gcc-8 for highlighting this... Change-Id: I53bfab631a40fd1b680c76a48b0307a33fa2b154 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-06-11MTU: Software interface / Per-protocol MTU supportOle Troan1-0/+3
This patch separates setting of hardware interfaec and software interface MTU. Software MTU is L2 payload MTU (i.e. not including L2 header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set. Currently only IP4, IP6 are enabled in adjacency / rewrite code. Documentation in src/vnet/MTU.md Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690 Signed-off-by: Ole Troan <ot@cisco.com>
2018-05-03MPLS prefetch fixesNeale Ranns2-15/+15
Change-Id: I565d79af410825c72f291ab40178883b1bc6f1df Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-18typo fix: UNKOWN -> UNKNOWNAndrey "Zed" Zaikin1-1/+1
Change-Id: I008a4d7ad7160d1f07e7ceef712a5318a9368308 Signed-off-by: Andrey "Zed" Zaikin <zed.0xff@gmail.com>
2018-03-19Coverity found bugs in recent MPLS changesNeale Ranns1-15/+6
Change-Id: I590945fdc1af53208c990a52bbecdc992fd27532 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-16QoS recording and markingNeale Ranns1-1/+4
Change-Id: Ie5a50def4ec1e4a3b3404a8b6ab9ec248bc16744 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-13Common form of fib-path reproting in dumpsNeale Ranns1-11/+2
Change-Id: I8f6fdbbeef2ac7e9fe5d87490ae5cba6e9a0b294 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-09MPLS Unifom modeNeale Ranns7-92/+84
- support both pipe and uniform modes for all MPLS LSP - all API programming for output-labels requires that the mode (and associated data) is specificed - API changes in MPLS, BIER and IP are involved - new DPO [sub] types for MPLS labels to handle the two modes. Change-Id: I87b76401e996f10dfbdbe4552ff6b19af958783c Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-01-30Allow the provider of a midchain adjacency to pass context data that is ↵Neale Ranns2-4/+13
returned in the fixup function Change-Id: I458e6e03b03e27775df33a2fd302743126d6ac44 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-01-23VPPAPIGEN: vppapigen replacement in Python PLY.Ole Troan1-1/+1
This is a version of the VPP API generator in Python PLY. It supports the existing language, and has a plugin architecture for generators. Currently C and JSON are supported. Changes: - vl_api_version to option version = "major.minor.patch" - enum support - Added error checking and reporting - import support (removed the C pre-processor) - services (tying request/reply together) Version: option version = "1.0.0"; Enum: enum colours { RED, BLUE = 50, }; define foo { vl_api_colours_t colours; }; Services: service { rpc foo returns foo_reply; rpc foo_dump returns stream foo_details; rpc want_stats returns want_stats_reply events ip4_counters, ip6_counters; }; Future planned features: - unions - bool, text - array support (including length) - proto3 output plugin - Refactor C/C++ generator as a plugin - Refactor Java generator as a plugin Change-Id: Ifa289966c790e1b1a8e2938a91e69331e3a58bdf Signed-off-by: Ole Troan <ot@cisco.com>
2018-01-18FIB Inherited SrouceNeale Ranns1-2/+2
forwarding provided by the source is pushed to all other entries it covers in the sub-tree Change-Id: I2a45222ef653358f55c2436de3e3c6353cfadba2 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-01-11api: remove transport specific code from handlersFlorin Coras1-12/+12
This does not update api client code. In other words, if the client assumes the transport is shmem based, this patch does not change that. Furthermore, code that checks queue size, for tail dropping, is not updated. Done for the following apis: Plugins - acl - gtpu - memif - nat - pppoe VNET - bfd - bier - tapv2 - vhost user - dhcp - flow - geneve - ip - punt - ipsec/ipsec-gre - l2 - l2tp - lisp-cp/one-cp - lisp-gpe - map - mpls - policer - session - span - udp - tap - vxlan/vxlan-gpe - interface VPP - api/api.c OAM - oam_api.c Stats - stats.c Change-Id: I0e33ecefb2bdab0295698c0add948068a5a83345 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-01-09api: refactor vlibmemoryFlorin Coras1-4/+4
- separate client/server code for both memory and socket apis - separate memory api code from generic vlib api code - move unix_shared_memory_fifo to svm and rename to svm_fifo_t - overall declutter Change-Id: I90cdd98ff74d0787d58825b914b0f1eafcfa4dc2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-12-20Fix MPLS local-label CLI help stringMarek Gradzki1-1/+1
CLI parsing code (unformat_fib_route_path) does not recognise 'resolve-via-connected'. However it understands 'resolve-via-attached'. Change-Id: I57e5eb75199cb8ae72c0fc8642a41f042b022201 Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2017-12-09BIER in non-MPLS netowrksNeale Ranns1-14/+0
as decsribed in section 2.2 ihttps://tools.ietf.org/html/draft-ietf-bier-mpls-encapsulation-10 with BIFT encoding from: https://tools.ietf.org/html/draft-wijnandsxu-bier-non-mpls-bift-encoding-00 changes: 1 - introduce the new BIFT lookup table. BIER tables that have an associated MPLS label are added to the MPLS-FIB. Those that don't are added to the BIER table 2 - BIER routes that have no associated output MPLS label will add a BIFT label. 3 - The BIER FMask has a path-list as a member to resolve via any possible path. Change-Id: I1fd4d9dbd074f0e855c16e9329b81460ebe1efce Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-12-08Remove the unused 'create VRF if needed' API parametersNeale Ranns1-4/+0
Change-Id: I35e166feeb0ac1e0e570efe07cb5f4cbeb5b8670 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-11-26FIB: store the node type not the function pointer.Neale Ranns1-2/+0
Saves memory at no appreciable performance cost. before: DBGvpp# sh fib mem FIB memory Name Size in-use /allocated totals Entry 80 7 / 150 560/12000 after: DBGvpp# sh fib mem FIB memory Name Size in-use /allocated totals Entry 72 7 / 7 504/504 Change-Id: Ic5d3920ceb57b54260dc9af2078c26484335fef1 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-22CLI for interface MPLS enable returns errors to callerNeale Ranns1-1/+5
Change-Id: I9eef6fb9d050552f0759080ea645b885d5b9cc12 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-22Fix MPLS local-label CLINeale Ranns1-2/+2
Change-Id: Ia3d3d7a75282dc3073eaa83e49cef756db19874a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-18unformat function for FIB pathsNeale Ranns2-205/+14
Change-Id: I32de25890ac0a643314f650591d2479879d9a2a6 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-10Break up vpe.apiNeale Ranns2-0/+32
- makes the VAPI generated file more consumable. - VOM build times improve. Change-Id: I838488930bd23a0d3818adfdffdbca3eead382df Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-11-09BIERNeale Ranns2-2/+3
- see draft-ietf-bier-mpls-encapsulation-10 - midpoint, head and tail functions - supported payload protocols; IPv4 and IPv6 only. Change-Id: I59d7363bb6fdfdce8e4016a68a9c8f5a5e5791cb Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-11-07UDP Encapsulation.Neale Ranns1-1/+3
A UDP-encap object that particiapates in the FIB graph and contributes DPO to teh output chain. It thereofre resembles a tunnel but without the interface. FIB paths (and henace routes) can then be created to egress through the UDP-encap. Said routes can have MPLS labels, hence this also allows MPLSoUPD. Encap is uni-directional. For decap, one still registers with the UDP port dispatcher. Change-Id: I23bd345523b20789a1de1b02022ea1148ca50797 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-15Revert "Enforce FIB table creation before use"Florin Coras1-0/+5
This reverts commit f9342023c19887da656133e2688a90d70383b0c5. Reverting to unblock master. No idea why jjb +1ed this patch! On closer inspection it looks like it -1ed it and subsequently changed opinion. CSIT tests should be fixed before re-merging. Change-Id: I26608912a962c52083073e16c7c9d2cc44a3cc8d Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-14Source Lookup progammable via APINeale Ranns1-2/+13
Change-Id: I5d5d4f22b6369d504455a644f73076d772fbcfb4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-13Enforce FIB table creation before useNeale Ranns1-5/+0
last i the serise of the use of the FIB table create/delete API. VPP now forces the tables to have been explicitly creted before they are used. Change-Id: Ifde3b1bbb76697a01ab71bce4f5264e6d1725467 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-09vppapigen: support per-file (major,minor,patch) version stampsDave Barach1-0/+2
Add one of these statements to foo.api: vl_api_version 1.2.3 to generate a version tuple stanza in foo.api.h: /****** Version tuple *****/ vl_api_version_tuple(foo, 1, 2, 3) Change-Id: Ic514439e4677999daa8463a94f948f76b132ff15 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Ole Troan <ot@cisco.com>
2017-10-05Distributed Virtual Router SupportNeale Ranns1-7/+1
A distributed virtual router works by attmpeting to switch a packet, but on failing to find a local consumer (i.e. the packet is destined to a locally attached host) then the packet is sent unmodified 'upstream' to where the rest of the 'distributed' router is present. When L3 switching a packet this means the L2 header must not be modifed. This patch adds a 'l2-bridge' object to the L3 FIB which re-injects packets from the L3 path back into the L2 path - use with extreme caution. Change-Id: I069724eb45956647d7980cbe40a80a788ee6ee82 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-10-04[aarch64] Fixes CLI crashes on dpaa2 platform.Christophe Fontaine1-2/+2
- always use 'va_args' as pointer in all format_* functions - u32 for all 'indent' params as it's declaration was inconsistent Change-Id: Ic5799309a6b104c9b50fec309cba789c8da99e79 Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
2017-09-19Fix MPLS table create CLINeale Ranns1-7/+2
Change-Id: I1f3c0f879f636e587aa518c41e5ad99af65129a7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-18Fixes for issues Coverity has reported (VPP-972)Chris Luke1-1/+1
177117: fstat() returns -1 on error; the code is checking for any positive value instead 175142: final return could never be reached; simple refactoring 175235,175236: Warning suppressed with an explicit cast to (void) 174817: Final return couldn't be reached; is is_in_order is 0 then 'rv' is already returned above 172095,172093: If is_is_set does not get set to 1, then return 0 has already been invoked 174405: Re-kill this (nothing sets rv) 171136: Looks like a cmd line flag to set test_bytes was missing; added it, and refactored the argc/argv processing to avoid two other potential segv's 176813: Add range checking for term width/height. First stab at a reasonable range is 1-512 for both. 175350: Fix implicit casting in shift operation 174272: Not a c+p error; try using a coverity annotation to ignore it 174273,175320: Annotated FORWARD_NULL Change-Id: I58d0f860fc2209f59f8d1b6b344d631b8d429ace Signed-off-by: Chris Luke <chrisy@flirble.org>
2017-09-13Add a name to the creation of an IP and MPLS tableNeale Ranns4-28/+46
Change-Id: I4b4648831551519b2ffb6f93255d28a4b8726c22 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-11replace uint32_t with u32Neale Ranns1-2/+2
Change-Id: I6cab79c266837a8731adcf78c9e093dfa6be0ead Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-11FIB table add/delete APINeale Ranns4-30/+154
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-06Fixes for issues raised by Coverity (VPP-972)Chris Luke1-3/+0
Change-Id: I4b1f27b95d67d48b7a13750ff8754c344ed7afa7 Signed-off-by: Chris Luke <chrisy@flirble.org>
2017-08-14FIB table add/delete API onlyNeale Ranns2-0/+31
commit only the addition of the .api definition and their invocation through VAT so CSIT can use it Change-Id: Id510f14b1ce007fe5e92120507ea34100652fc64 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-10MPLS tunnel - multiple labels on the CLI - fix cut and paste robot errorsNeale Ranns1-13/+4
Change-Id: I675af62d9c0c9cf2e340bf19e902695861d4e4b5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-09Allow multiple MPLS output labels to be passed on the CLINeale Ranns2-13/+43
Change-Id: Ib5af105e32b6b0df86923e189ab6bf6ee59de5b9 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-08L2 over MPLSNeale Ranns5-80/+94
[support for VPWS/VPLS] - switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths - VLIB nodes to handle pop/push of MPLS labels to L2 Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-01FIB path weight incorrect in dump (VPP-922)Neale Ranns2-3/+6
Change-Id: I655f41878ca3595681d0255782b0faba01c9824b Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-07-18FIB path preferenceNeale Ranns2-0/+4
Paths are given a preference, lowest value is 'best'. Only paths that are up are up contribute to fprwarding - that's unchanged. What's new is that of the path's that re up only those that have the best preference contribute. A poor man's primary and backup. It's not true primary/backup function because the FIB must converge before the lower preference paths are used. Change-Id: Ie4453c4a7b1094c6c2b51fe1594b8302103bb68e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-06-10MPLS: cannot delete a path from the CLINeale Ranns1-13/+25
Change-Id: I7f85870ef99405727312a5de6839c8875c9fa1c5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-06-01MPLS trace the EOS bit correctlyNeale Ranns1-1/+2
Change-Id: I6c3fd612c19d9305f48ae0e429e12e96679e3b29 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-26MPLS lookup DPO does not pop the label (nor does it handle replicate)Neale Ranns2-77/+104
Change-Id: I7de6b96631d1645d0eadd38525860d84d78e316d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-25MPLS hash function improvementsNeale Ranns2-6/+63
Change-Id: I28e98f445c01493562b6196a4f5b532a51f178af Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-25MPLS interface output feature not explicitly enabledNeale Ranns1-2/+0
Change-Id: I54cb5113ec8e37f5da321041d7925393cae31aa5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-24MPLS tunnels; path-list lock leak and debug CLI imrpovementsNeale Ranns1-7/+16
Change-Id: Ifb51b49d4dac1f07027b12398314a52b5cce343e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-05-24MPLS trace fixesNeale Ranns2-1/+7
Change-Id: I141a14e1098e562bdb3c3ac576754f4f19dbcb04 Signed-off-by: Neale Ranns <nranns@cisco.com>