summaryrefslogtreecommitdiffstats
path: root/src/vnet/mpls
AgeCommit message (Collapse)AuthorFilesLines
2024-04-09mpls: fix default mpls lb hash configVladislav Grishenko1-116/+119
In case of multiple path within tunnel, mpls lookup node computes lb hash with mpls_compute_flow_hash config value 0, so only mpls label and l4 ports gets accounted, not 5-tuple. This leads to flow traffic polarization and disbalance over mpls paths. Use mpls hash config from lb instead, usually it'll be MPLS_FLOw_HASH_DEFAULT with 5-tuple plus flowlabel. As optimization, fix flow hash reuse from the previous lookup node if present, like ip_lookup does. Previously mpls lookup always calcs the hash. Test lb distribution for both cases. Also, use the same flow hash hex format in ip4/ip6 and mpls traces for easier reading, most code changes is due fixstyle formatting. Type: fix Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru> Change-Id: Ib89e1ab3edec14269866fe825a3e887d6c817b7c
2024-03-12misc: remove GNU Indent directivesDamjan Marion3-10/+0
Type: refactor Change-Id: I5235bf3e9aff58af6ba2c14e8c6529c4fc9ec86c Signed-off-by: Damjan Marion <damarion@cisco.com>
2024-03-04fib: fix crash while adding intf-rx routesVladislav Grishenko2-2/+13
Fix crash while adding intf-rx ip4 and ip6 routes via api due invalid exporting of interface rx routes as attached. Also, add missed route path via rx-ip6 cli support. Type: fix Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru> Change-Id: I15711c8c0787398dd7e3baa4787019bb1f317666
2023-08-29mpls: add mpls_interface_dumpPim van Pelt2-0/+68
Add an API call mpls_interface_dump() which returns a list of mpls_interface_details: - If no sw_if_index is given, all MPLS enabled sw_if_index are returned. - If a particular sw_if_index is given, and it doesn't exist, an empty list is returned. - If a sw_if_index exists and has MPLS enabled, a list of that one sw_if_index is returned. Tested: - Create 3 loopback interfaces - Call for ~0 and for sw_if_index 0..5 all return empty lists - set int mpls loop0 enable - set int mpls loop1 enable - Call for ~0 returns 2, and the call for sw_if_index=1 and =2 (the loopbacks) returns each a list of one sw_if_index 1 resp 2, the other values of sw_if_index return empty list - set int mpls loop0 disable - Call for ~0 returns 1, and the call for sw_if_index=2 (loop1) returns both a list of one sw_if_index=2, the other values of sw_if_index return empty list - set int mpls loop1 disable - Call for ~0 and for sw_if_index 0..5 all return empty lists Example Python3 API program: ``` api_response = vpp.api.mpls_interface_dump() print(f"Response is {api_response}") for i in [ 0, 1, 2, 3, 4, 5 ]: api_response = vpp.api.mpls_interface_dump(sw_if_index=i) print(f"Response[{i}] = {api_response}") ``` Type: improvement Change-Id: If87f7d7f8972d99260e859757dbcb251c6fa54a8 Signed-off-by: Pim van Pelt <pim@ipng.nl>
2023-05-21mpls: implement state change callbacksAdrian Pistol2-5/+37
There was already a basic type defined, but nothing more. This implements callbacks similar to ip4_enable_disable_interface_callback_t. Type: feature Change-Id: I34fcb146ca68af4eb8cdd244529eb149f884284d Signed-off-by: Adrian Pistol <vifino@posteo.net>
2022-08-11mpls: Use the .api for the definition of error/info countersNeale Ranns7-63/+111
Type: improvement Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I9d25f5459ab70d9cf8556e44cfddfd7029e5b540
2022-08-11ip: Use .api declared error countersNeale Ranns1-7/+1
Type: improvement Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I822ead1495edb96ee62e53dc5920aa6c565e3621
2022-05-19api: refactor api data storageDamjan Marion1-1/+2
single struct to hold all api handler, flags, etc. Provide functions to toggle flags instead of writing directly to internal data. Type: refactor Change-Id: I4730d7290e57489de8eda34a72211527e015b721 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-03-24mpls: Set the MTU field in the frag-needed ICMP when doing MPLS fragmentationNeale Ranns1-4/+3
Type: fix The reported MTU should include the MPLS label overhead Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I3df6d2e0b13f49701e187a766a157498dcaafbc0
2022-03-07ip: Fixes for IPv6 and MPLS fragmentationNeale Ranns1-41/+64
Type: fix - IPv6 fragmentation did not work if the packet spaneed multiple buffers, because the 'len' calculation to did max out at the size of a buffer - IPv6 fragmentation did not work when the l2unfragmentable size was non-zero, it was not used in the correct places - IPv6oMPLS fragmentation would fragment all IPv6, it should do so only for link local - IPv6oMPLS should send back TooBig ICMP6 for non locally generated Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ie8f02cdfdd7b7e8474e62b6d0acda8f20c371184
2022-03-04mpls: Fix the fragmentation in mpls-output.Neale Ranns1-84/+80
Type: fix the MTU needs to be adjusted to account for the label stack, since the size of fragments produced is stack+mtu. these changes are to the use of the stack variable 'mtu' most of the patch results from appeasing checkstyle. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I8d0e10cf52ca4dd8ecdc224ed6c54a13e4768fdd
2022-02-09fib: ip6 and mpls fib_table memory leaks on fib_table->ft_locksSteven Luong1-2/+3
ip6 and mpls fib_table->ft_locks memory leaked when the table is deleted. name tag is leaked for mpls table parsing. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Ife68c0ddc3a6f9437a149b308310f042799c2116
2021-12-21fib: MPLS EOS chains built for attached prefixes should link to a lookup DPONeale Ranns1-4/+2
Type: fix Presently a local label associated with an attached or connected prefix will link to the glean. This is a problem since it will never use the adj-fibs that are installed for that attached prefix. Instead link the local label to a lookup in the table in which the attached link is bound. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Iad49fb6168b9ba47216a9a52bd262363b49c3c43
2021-11-19fib: Don't use [midchain] adjacencies to change an interface's feature arcNeale Ranns1-0/+4
Type: fix Using the adjacency to modify the interface's feature arc doesn't work, since there are potentially more than one adj per-interface. Instead have the interface, when it is created, register what the end node of the feature arc is. This end node is then also used as the interface's tx node (i.e. it is used as the adjacency's next-node). rename adj-midhcain-tx as 'tunnel-output', that's a bit more intuitive. There's also a fix in config string handling to: 1- prevent false sharing of strings when the end node of the arc is different. 2- call registered listeners when the end node is changed For IPSec the consequences are that one cannot provide per-adjacency behaviour using different end-nodes - this was previously done for the no-SA and an SA with no protection. These cases are no handled in the esp-encrypt node. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: If3a83d03a3000f28820d9a9cb4101d244803d084
2021-10-11ip: fix fib and mfib locksNathan Skrzypczak3-23/+10
This patches fixes an issue that could cause fib locks to underflow: if an API user deletes a fib and quickly recreates it, the fib may not have been actually deleted. As a result, the lock would not be incremented on the create call leading to the fib potentially disappearing afterwards - or to the lock to underflow when the fib is deleted again. In order to keep the existing API semantics, we use the locks with API and CLI source as flags. This means we need to use a different counter for the interface-related locks. This also prevents an issue where an interface being bound to a vrf via API and released via CLI could mess up the lock counter. Finally, this will help with cleaning up the interface-related locks on interface deletion in a later patch. Type: fix Change-Id: I93030a7660646d6dd179ddf27fe4e708aa11b90e Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com> Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
2021-10-06docs: vnet comment nitfixesNathan Skrzypczak1-1/+1
Type: improvement Change-Id: Iac01d7830b53819ace8f199554be10ab89ecdb97 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-06-23mpls: api cleanupFilip Tehlar2-58/+10
Use autogenerated code. Does not change API definitions. Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I148022278a792b3687402b6915fe6fb513858a2a
2021-06-17mpls: CLI to show the MPLS forwarding state of an interfaceNeale Ranns1-0/+69
Type: improvement Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I28b98154bbff36e8391a09a2b30302dda4349946
2021-03-16fib: Allow the creation of new source on the APINeale Ranns1-7/+5
Type: feature an client can dump the existing sources, examine their priorities, then define thier own source. Usefull if a client wants to distingusih between say, static, ospf, bgp, etc routes it has added over the API. Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: I5158b4fa1ebe87381ff8707bb173217f56ea274a
2021-02-04mpls: MPLS Hash fixesNeale Ranns1-6/+6
Type: fix MPLS hash includes the IP hash at the bottom of the stack. Default this to the IP default and use the value passed in to the compute function. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I3f8cb0f7c4fe98ea903a752c2b5fd3d7e26d449a
2021-01-28ip: Router ID included in flow hashNeale Ranns1-0/+1
Type: feature A device/router needs to have a unique ID which is included in the flow has so that flows are not polarised through the network, i.e. each deice in the network chooses the same nth link for the same flow. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I963e03674adbb085902b4084fdc4886b88f5734c
2021-01-18ipsec: Support MPLS over IPSec[46] interfaceNeale Ranns1-32/+27
Type: feature Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I89dc3815eabfee135cd5b3c910dea5e2e2ef1333
2020-12-14misc: move to new pool_foreach macrosDamjan Marion2-9/+9
Type: refactor Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-11-26gre: Move to new API generated types/messagesNeale Ranns1-1/+0
Type: improvement also clean up GRE includes across the code base. Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I90928b0da3927b7ca1a23683aa80d4b53bbf63fd
2020-11-25api: vat2 and json autogeneration for api messagesOle Troan1-2/+2
VAT2: A completely auto-generated replacement of VAT. Reads input message in JSON from stdin and outputs received messages in JSON. A VAT2 plugin is automatically built for a .api file. There no longer a need for a separate _test.c. Example: vat2 show_version {} { "_msgname": "show_version_reply", "retval": 0, "program": "vpe", "version": "21.01-rc0~411-gf6eb348a6", "build_date": "2020-11-19T09:49:25", "build_directory": "/vpp/autogen3" } vat2 sw_interface_dump '{"sw_if_index": -1, "name_filter_valid": 0, "name_filter": ""}' [{ "_msgname": "sw_interface_details", "sw_if_index": 0, "sup_sw_if_index": 0, "l2_address": "00:00:00:00:00:00", "flags": "Invalid ENUM", "type": "IF_API_TYPE_HARDWARE", "link_duplex": "LINK_DUPLEX_API_UNKNOWN", "link_speed": 0, "link_mtu": 0, "mtu": [0, 0, 0, 0], "sub_id": 0, "sub_number_of_tags": 0, "sub_outer_vlan_id": 0, "sub_inner_vlan_id": 0, "sub_if_flags": "Invalid ENUM", "vtr_op": 0, "vtr_push_dot1q": 0, "vtr_tag1": 0, "vtr_tag2": 0, "outer_tag": 0, "b_dmac": "00:00:00:00:00:00", "b_smac": "00:00:00:00:00:00", "b_vlanid": 0, "i_sid": 0, "interface_name": "local0", "interface_dev_type": "local", "tag": "" }] This is the first phase and vat2 is not integrated in packaging yet. Type: feature Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Ib45ddeafb180ea7da8c5dc274a9274d7a4edc876 Signed-off-by: Ole Troan <ot@cisco.com>
2020-10-28misc: Break the big IP header files to improve compile timeNeale Ranns1-0/+2
Type: refactor Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Change-Id: Id1801519638a9b97175847d7ed58824fb83433d6
2020-10-14mpls: no per-MPLS-tunnel tx nodeNeale Ranns3-98/+161
Type: improvement do not add a per-MPLS tunnel tx node. per-tunnl nodes limit the number of tunnels that can be created to the number o fnodes that can be created (64k). improve the tx node. Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I6016f05e809c6c64a0b098a101b28c9dd47824b3
2020-10-07misc: Purge unused pg includesNeale Ranns4-4/+0
Type: style Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I26a19e42076e031ec5399d5ca05cb49fd6fbe1cd
2020-09-01mpls: fix adjacencies walk in case of restackBenoît Ganne1-1/+1
Adjacencies are only defined for IPv4 and IPv6. Type: fix Fixes: 20aec3db441074ee5a861a40d6e02fad2f3dcb37 Change-Id: I19b2b7f6958da49f41c6eabc9f248840769acbbb Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-05-27ethernet: fix DMAC check and skip unnecessary ones (VPP-1868)John Lo1-0/+7
Fix and optimize DMAC check in ethernet-input node to utilize NIC or driver which support L3 DMAC-filtering mode so that DMAC check can be bypassed safely for interfaces/sub-interfaces in L3 mode. Checking of interface in L3-DMAC-filtering state to avoid DMAC check require the following: a) Fix interface driver init sequence for devices which supports L3 DMAC-filtering to indicate its capability and initialize interface to L3 DMAC-filtering state. b) Fix ethernet_set_flags() function and its associated callback flags_change() functions registered by various drivers in interface infra to provide proper L3 DMAC filtering status. Maintain interface/sub-interface L3 config count so DMAC checks can be bypassed if L3 forwarding is not setup on any main/sub-interfaces. Type: fix Ticket: VPP-1868 Signed-off-by: John Lo <loj@cisco.com> Change-Id: I204d90459c13e9e486cfcba4e64e3d479bc9f2ae
2020-05-06docs: clean up make docs jobPaul Vinciguerra1-1/+1
Type: docs Change-Id: I9b5e5137eb4c1e89f6e8d7a278cd11a0fd496471 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-04-28tests: move defaults from defaultmapping to .api filesPaul Vinciguerra1-3/+3
facilitates use of papi beyond the tests. Type: improvement Change-Id: I3d502d9130b81a7fb65ee69bb06fe55802b28a27 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-04-09mpls: fix typo in error pathDave Barach1-10/+9
if ip4_frag_do_fragment(...) returns an error due to buffer allocation failure, we end up trying to increment a nonexistent counter, which causes an ASSERT failure. The second argument to vlib_error_count is a node index, not a next index... Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ib0733b0d35bcb9d3ca6bd789e0c5ddc1561ce724
2020-03-10mpls: add user defined name tag to mpls tunnelsIJsbrand Wijnands4-4/+19
This allows a user creating MPLS tunnel through the bin_api to add a name tag. This is useful to correlate the Tunnel with its use-case. Also useful if the user needs to recover the MPLS Tunnel after a restart (mark-sweep). Type: feature Change-Id: Signed-off-by: IJsbrand Wijnands <ice@cisco.com> Change-Id: Idc080a63810a176ab090a2678a73d2cf9f7b523f
2020-01-10docs: Edit FEATURE.yaml files so they can be publishedJohn DeNisco1-1/+1
Type: docs Signed-off-by: John DeNisco <jdenisco@cisco.com> Change-Id: I7280e5c5ad10a66c0787a5282291a2ef000bff5f
2020-01-07mpls: Add FEATURE.yamlNeale Ranns1-0/+10
Type: docs Change-Id: Ic76a4bbfe2e2e45b7ea44556bc974c243970e9bf Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-01-03mpls: api cleanupJakub Grajciar1-18/+18
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I44633df6d189da707657fbf9f9ba49c5f3879e9f
2019-12-10api: multiple connections per processDave Barach1-1/+1
Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I2272521d6e69edcd385ef684af6dd4eea5eaa953
2019-12-03fib: constify the adjacency in the rewrite nodesNeale Ranns1-1/+1
Type: refactor Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I3aad20b35d89fc541fdf185096d71ca12b09a6e2
2019-11-26fib: Table ReplaceNeale Ranns2-9/+0
Type: feature from the API doc, a table replace is: " The use-case is that, for some unspecified reason, the control plane has a very different set of entries it wants in the table than VPP currently has. The CP would thus like to 'replace' VPP's current table only by specifying what the new set of entries shall be, i.e. it is not going to delete anything that already eixts. the CP delcartes the start of this procedure with this begin_replace API Call, and when it has populated all the entries it wants, it calls the below end_replace API. From this point on it is of coursce free to add and delete entries as usual. The underlying mechanism by which VPP implements this replace is purposefully left unspecified. " In the FIB, the algorithm is implemented using mark and sweep. Algorithm goes: 1) replace_begin: this marks all the entries in that table as 'stale' 2) download all the entries that should be in this table - this clears the stale flag on those entries 3) signal the table converged: ip_table_replace_end - this removes all entries that are still stale this procedure can be used when an agent first connects to VPP, as an alternative to dump and diff state reconciliation. Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-11-11ip: functional interface to ip fragmentationOle Troan1-37/+181
This provides a functional interface to IP fragmentation. Allowing external features to fragment. Supports arbitrary encap size, for e.g. MPLS or inner fragmentation of tunnels. This also removed dual loop in MAP that was fundamentally broken. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Ia89ecec8ee3cbe2416edbe87630fdb714898c2a8 Signed-off-by: Ole Troan <ot@cisco.com>
2019-11-04mpls: number of mpls tunnel paths returns zeroIJsbrand Wijnands1-1/+1
The number of paths on the mpls tunnel returned through the bapi is always zero. Doing a ntohl on a uint32 and poking it into a uint8 causes the problem. Type: fix Signed-off-by: IJsbrand Wijnands <ice@cisco.com> Change-Id: I4135ad43a891e7818ca673c8067ef1f11cb34530
2019-10-09mpls: support fragmentation of mpls output packetRajesh Goel2-14/+57
Type: fix Signed-off-by: Rajesh Goel <rajegoel@cisco.com> Change-Id: Ie4372c5cf58ab215cdec5ce56f8a994daaba2844
2019-09-19api: split vl_api_prefix into twoOle Troan1-2/+1
One type for address with prefix and one type for prefix. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Icfec51d9b7d5cde1d69fbecdd97498688ab7b295 Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Klement Sekera <ksekera@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com>
2019-08-20vppapigen: remove support for legacy typedefsPaul Vinciguerra1-3/+3
vppapigen has remapped legacy to typedefs behind the scenes for some time now. - update .api files to use new style typedefs. - issue error on 'typeonly define' in .api files - remove unneeded macros redefining vl_noop_handler Type: refactor Change-Id: I7a8c4a6dafacee6a131f95cd0e9b03a8c60dea8b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-07-26dhcp ip: DSCP settings for transmitted DHCP packetsNeale Ranns1-4/+6
Type: feature - Define the ip_dscp_t and use in the IP headers - Add DSCP setting to the DHCP client for use with packet TX Change-Id: If220dde0017ea78793747d65f53e11daf23a28fa Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-03fib: allow route delete with no paths and multipath=0 to remove theNeale Ranns1-7/+7
whole route Type: fix Fixes: 097fa66b Change-Id: I017ab5797670eb278c27c6e306cd8cadaacddf9d Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-19mpls: fix header offset overflowBenoît Ganne1-3/+6
rw_len (MPLS rewrite string length) is declared as unsigned but is used as -rw_len with vlib_buffer_advance(), resulting in a wrong, huge offset. Type: fix Fixes: 734d430f37251bc7e71d507983ee640ae1625fbe Ticket: VPP-1705 Change-Id: I7357249f7e50b7d30fd61f5be4858a26e43df85d Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-06-18fib: fib api updatesNeale Ranns3-275/+220
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-30mpls: leverage vlib_buffer_advanceZhiyong Yang1-7/+4
Change-Id: I363a4444f4d296f04371acd65c702b1a1ce70913 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>