aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/pg/cli.c
AgeCommit message (Collapse)AuthorFilesLines
2021-04-26pg: fix packet coalescing cliRay Kinsella1-2/+2
Small fix to the packet coalescing cli. Type: fix Signed-off-by: Ray Kinsella <mdr@ashroe.eu> Change-Id: I1edbf6e43937aa0345185f06437095e0558dba31
2021-02-15vlib: refactor checksum offload supportMohsin Kazmi1-1/+3
Type: refactor This patch refactors the offload flags in vlib_buffer_t. There are two main reasons behind this refactoring. First, offload flags are insufficient to represent outer and inner headers offloads. Second, room for these flags in first cacheline of vlib_buffer_t is also limited. This patch introduces a generic offload flag in first cacheline. And detailed offload flags in 2nd cacheline of the structure for performance optimization. Change-Id: Icc363a142fb9208ec7113ab5bbfc8230181f6004 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-12-14misc: move to new pool_foreach macrosDamjan Marion1-4/+4
Type: refactor Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-08-14gso: packet coalesce libraryMohsin Kazmi1-3/+7
Type: feature Change-Id: Ia19d3611e596d9ec47509889b34e8fe793a0ccc3 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-04-15pg: set vnet buffer flags in pg streamsDave Barach1-0/+4
See .../extras/pg/checksum_offload.pg for a nontrivial example, which deliberately sets bogus ip and udp checksums in the generated packets, then fixes the mess with (software emulated) hardware checksum offload. Validated via "pcap dispatch trace on max 1000 buffer-trace pg-input 100". Packets stuffed into loop1-output have the configured bogus ip and udp checksums. vnet_calc_checksums_inline(...) fixes the checksums, which are correct when packets visit loop1-tx. The packet generator is a dumb robot in this regard. If you ask for a ridiculous flag combination - example: ip4 and ip6 - your mileage may vary. Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I6d9e790f373bcd9e445a89113ca8e4c8f9aa9419
2020-02-26pg: API cleanupJakub Grajciar1-2/+2
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: Ibf693e4b178d2579bc3afb9653bffc07fbb7dd0a Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-12-17pg: don't leak open files in packet-generatorChristian E. Hopps1-0/+3
Fix pg code to close it's open file descriptors before zero'ing the pcap_main structure for re-use. Ticket: VPP-1780 Type: fix Signed-off-by: Christian E. Hopps <chopps@chopps.org> Change-Id: I32945c6476ae83b8d210ee67ac78db3e8f786f46
2019-10-03misc: add "maxframe" and "rate" to packet-generator cli.Christian E. Hopps1-3/+8
Allow for setting the maximum number of generated packets to be included in the frame passed to next nodes. This is very important for testing code which may be susceptible to multi-frame vs single-frame bugs (e.g., code that is doing re-ordering where packets may be buffered between frames). Update: - remove redundant packet "rate" option. - reduce n_max_frame to u32 as that's what pulled from the CLI. Type: feature Signed-off-by: Christian E. Hopps <chopps@chopps.org> Change-Id: Ie362bbb110b2cf01d9f65c559bbe9101e17b7fdc Signed-off-by: Christian Hopps <chopps@labn.net>
2019-07-31pg: clarify the text of error messageAndrew Yourtchenko1-1/+1
Enabling capture on pg with the file already existing results in a misleading error message. Fix the text. Change-Id: I1aea49cfeda3b4bfe6ed7b18fd543948a078508a Type: fix Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-07-28pg: add GSO supportMohsin Kazmi1-4/+14
Type: feature Change-Id: I72676495a85fbecc946aa266a75234cce70c3a5e Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-05-17Tests: Raise exception if API cli_inband command fails.Paul Vinciguerra1-1/+2
* Configure tests to raise exception if cli_inband fails. * Fix failing tests. * Add filename detail to pcap.stat clib_error_return for debugging. Note: this change identifies spurious issues with packet-generator such as: CliFailedCommandError: packet-generator capture: pcap file '/tmp/vpp-unittest-Test6RD-v09RPA/pg0_out.pcap' does not exist. These issues resolve themselves on remaining test passes. Change-Id: Iecbd09daee954d892306d11baff3864a43c5b603 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-09add mactime plugin unit / code coverage testsDave Barach1-8/+19
The unit and code coverage tests are boring. The rest of the patch involves test and packet-generator infra cleanups. Teach the "make test-xxx" family of targets to set the api test plugin path correctly, to make "binary-api <api-message-name> <args>" debug CLI commands work correctly in the "make test" environment. Unfortunately involves both the top-level and test Makefiles. Add a minor pg cli feature, a CLI to manually set s->sw_if_index[VLIB_TX]. Consider the case where one configures an interface with both a device-input and an output feature. To test the output feature using the pg, it's necessary to inject packets into the interface output node with both b->sw_if_index[VLIB_TX] and b->sw_if_index[VLIB_RX] set correctly. For example: packet-generator new { name tx limit 15 size 128-128 interface local0 # rx: device input feature not configured on local0 tx-interface loop0 # tx: output node requires b->sw_if_index[VLIB_TX] node loop0-output data { hex 0x01005e7ffffa000dead0000008000102030405060708090a0b0c0d0e0f0102030405 } } Fix a longstanding bug in the packet generator stream setup. Remove kludges which set b->sw_if_index[VLIB_TX] to ~0 [in multiple places] instead of using the stream value s->sw_if_index[VLIB_TX], and setting THAT datum correctly. Change-Id: I1097a18e8db73661ded6b822c1d718f7e5cf36ed Signed-off-by: Dave Barach <dave@barachs.net>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra1-1/+1
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-02-20pg: remove no-recycle optionDamjan Marion1-5/+0
Change-Id: Ic47bde2d08b2719b5c6c87cb2e9a8af0d2160e6e Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-02-09buffers: fix typoDamjan Marion1-1/+1
Change-Id: I4e836244409c98739a13092ee252542a2c5fe259 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-02-06buffers: make buffer data size configurable from startup configDamjan Marion1-1/+1
Example: buffers { default data-size 1536 } Change-Id: I5b4436850ca18025c9fdcfc7ed648c2c2732d660 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-01-23pg: cli improvementKingwel Xie1-31/+70
1. show packet-generator verbose, display all edit-groups and hdr-size 2. unformat_pg_payload, always mark payload hdr-size as 0 3. packet-generator now can change rate/limit/size at runtime 4. validate_stream checks buffer min-size/max-size against all edit groups' header size 5. remove incorrect max packet size limit check in validate_stream(...) Change-Id: Ic45e4f2b98bc0fd7330e0b480dd677fa3c69a677 Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com> Signed-off-by: Dave Barach <dave@barachs.net>
2019-01-01buffers: remove unused codeDamjan Marion1-1/+1
Change-Id: If2bbfbc52994f5de0879763e0b7a7864498debb6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-17pcap-based dispatch tracerDave Barach1-1/+1
To facilitate dispatch trajectory tracing, vlib_buffer_t decoding, etc. through Wireshark Change-Id: I31356b9fa1f40cba8830aaf10a86a9fbb7546438 Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-23c11 safe string handling supportDave Barach1-2/+2
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-05-17Packet generator: preserve pcap file timestampsDave Barach1-0/+1
Set vnet_buffer2(b0)->pg_replay_timestamp, for use when desired. Fix a memory leak in pg_stream_free(...), which wasn't freeing the replay packet templates. Change-Id: I01822a9e91a52de4774d2b95cf0c2ee254a915e9 Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-22VPP-635: CLI Memory leak with invalid parameterBilly McFall1-10/+29
In the CLI parsing, below is a common pattern: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else return clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); } unformat_free (line_input); The 'else' returns if an unknown string is encountered. There a memory leak because the 'unformat_free(line_input)' is not called. There is a large number of instances of this pattern. Replaced the previous pattern with: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else { error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); goto done: } } /* ...Remaining code... */ done: unformat_free (line_input); return error; } In multiple files, 'unformat_free (line_input);' was never called, so there was a memory leak whether an invalid string was entered or not. Also, there were multiple instance where: error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); used 'input' as the last parameter instead of 'line_input'. The result is that output did not contain the substring in error, instead just an empty string. Fixed all of those as well. There are a lot of file, and very mind numbing work, so tried to keep it to a pattern to avoid mistakes. Change-Id: I8902f0c32a47dd7fb3bb3471a89818571702f1d2 Signed-off-by: Billy McFall <bmcfall@redhat.com> Signed-off-by: Dave Barach <dave@barachs.net>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+636
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>