aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/pg
AgeCommit message (Collapse)AuthorFilesLines
2019-09-24vlib: add flag to explicitelly mark nodes which can init per-node packet traceDamjan Marion1-0/+1
Type: feature Change-Id: I913f08383ee1c24d610c3d2aac07cef402570e2c Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-09-23interface: use the correct condition for checking if the pcap fd is openAndrew Yourtchenko1-1/+1
The 9af7e2e87e used a comparison that fd is >= 0 to check that the pcap needs closing. While the pcap_close() function does reset the file descriptor to -1, the freshly initialized structure has it equal to 0. This causes the VPP to close stdin if the packets are being seen on pg interface without the capture file being opened. This triggers the vpp attempting to read from STDIN (another bug), which results in running out of memory. Change-Id: I11d61422701500a9b3e0dd52d59383f297d57f54 Type: fix Fixes: 9af7e2e87e Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-08-20fix pcap_write functionJack Xu1-1/+4
when use pcap cli to capture pcakets into two files rx01.pcap && rx02.pcap, the first time: 1)pcap rx trace on max 100 intfc any file rx01.pcap 2)......the process of capture data to buffer...... 3)pcap rx trace off the second time: 4)pcap rx trace on max 100 intfc any file rx02.pcap 5)......the process of capture data to buffer...... 6)pcap rx trace off the pcap_write function bug in this two lines pm->n_packets_captured = 0; if (pm->n_packets_captured >= pm->n_packets_to_capture) referring to calling pcap_close() will result in that the twice pcap cli both writes the packets into rx01.pcap, but nothing into rx02.pcap. Beside, the rx02.pcap file will not be created. solution: separate the pcap_close() out of pcap_write() Change-Id: Iedeb46f9cf0a4cb12449fd75a4014f95f3bb3fa8 Signed-off-by: Jack Xu <jack.c.xu@ericsson.com>
2019-08-17gso: fix l3 and l4 header offset in case of tagged interfaceMohsin Kazmi1-0/+14
previously, PG and virtio interfaces calculate wrong l3 and l4 header offset. This patch fixes this issue. Type: fix Ticket: VPP-1739 Change-Id: I5ba978e464babeb65e0711e1027320d46b3b9932 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-08-16gso: remove the ip checksum flag in case of ipv6Mohsin Kazmi1-1/+0
Type: fix Ticket: VPP-1727 Change-Id: Icfee35c5ab5e1c65079d1ca7bb514162319113e5 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-07-31pg: clarify the text of error messageAndrew Yourtchenko1-1/+1
Enabling capture on pg with the file already existing results in a misleading error message. Fix the text. Change-Id: I1aea49cfeda3b4bfe6ed7b18fd543948a078508a Type: fix Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-07-28pg: add GSO supportMohsin Kazmi6-11/+109
Type: feature Change-Id: I72676495a85fbecc946aa266a75234cce70c3a5e Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-07-18vlib: convert frame_index into real pointersAndreas Schultz1-1/+1
The fast path almost always has to deal with the real pointers. Deriving the frame pointer from a frame_index requires a load of the 32bit frame_index from memory, another 64bit load of the heap base pointer and some calculations. Lets store the full pointer instead and do a single 64bit load only. This helps avoiding problems when the heap is grown and frames are allocated below vm->heap_aligned_base. Type: refactor Change-Id: Ifa6e6e984aafe1e2755bff80f0a4dfcddee3623c Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com> Signed-off-by: Dave Barach <dave@barachs.net>
2019-06-29pg: format_pg_input_trace - reorder fieldsPaul Vinciguerra1-1/+1
00:00:00:814640: pg-input stream pcap0-sw_if_index-1, 42 bytes, 1 sw_if_index is changed to: 00:00:00:814640: pg-input stream pcap0-sw_if_index-1, 42 bytes, sw_if_index 1 Type: style Change-Id: I9bb32494c9c1d08bc7588f088ed67a60ed3236dd Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-22stats: support multiple works for error countersOle Troan1-3/+0
The current code only allowed access to the main thread error counters. That is not so useful for a multi worker instance. No return a vector indexed by thread of counter_t values. Type: fix Change-Id: Ie322c8889c0c8175e1116e71de04a2cf453b9ed7 Signed-off-by: Ole Troan <ot@cisco.com>
2019-05-17Tests: Raise exception if API cli_inband command fails.Paul Vinciguerra1-1/+2
* Configure tests to raise exception if cli_inband fails. * Fix failing tests. * Add filename detail to pcap.stat clib_error_return for debugging. Note: this change identifies spurious issues with packet-generator such as: CliFailedCommandError: packet-generator capture: pcap file '/tmp/vpp-unittest-Test6RD-v09RPA/pg0_out.pcap' does not exist. These issues resolve themselves on remaining test passes. Change-Id: Iecbd09daee954d892306d11baff3864a43c5b603 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-09add mactime plugin unit / code coverage testsDave Barach3-20/+30
The unit and code coverage tests are boring. The rest of the patch involves test and packet-generator infra cleanups. Teach the "make test-xxx" family of targets to set the api test plugin path correctly, to make "binary-api <api-message-name> <args>" debug CLI commands work correctly in the "make test" environment. Unfortunately involves both the top-level and test Makefiles. Add a minor pg cli feature, a CLI to manually set s->sw_if_index[VLIB_TX]. Consider the case where one configures an interface with both a device-input and an output feature. To test the output feature using the pg, it's necessary to inject packets into the interface output node with both b->sw_if_index[VLIB_TX] and b->sw_if_index[VLIB_RX] set correctly. For example: packet-generator new { name tx limit 15 size 128-128 interface local0 # rx: device input feature not configured on local0 tx-interface loop0 # tx: output node requires b->sw_if_index[VLIB_TX] node loop0-output data { hex 0x01005e7ffffa000dead0000008000102030405060708090a0b0c0d0e0f0102030405 } } Fix a longstanding bug in the packet generator stream setup. Remove kludges which set b->sw_if_index[VLIB_TX] to ~0 [in multiple places] instead of using the stream value s->sw_if_index[VLIB_TX], and setting THAT datum correctly. Change-Id: I1097a18e8db73661ded6b822c1d718f7e5cf36ed Signed-off-by: Dave Barach <dave@barachs.net>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra1-1/+1
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-02-22Add no-append flag to vlib_frame_tDamjan Marion1-0/+1
Change-Id: I01c4f5755d579282773ac227b0bc24f8ddbb2bd1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-02-20pg: fix payload hex-string bugKingwel Xie1-6/+8
Change-Id: I0ea98bf9c203398d9cf85d22994a10217bb511d2 Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
2019-02-20pg: fix tracing when device-input feature arc is usedDamjan Marion1-6/+4
Change-Id: I82240b43d3a5f3f33ac9ab2de106b3ec0ea31780 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-02-20pg: fix crash when multiple streams are enqueuing to the same nextDamjan Marion1-1/+1
Only with debug image and when next node is not ethernet-input... Change-Id: Iaa404b5d35d5c04996ff48cd16877858092b78d7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-02-20pg: remove no-recycle optionDamjan Marion2-6/+0
Change-Id: Ic47bde2d08b2719b5c6c87cb2e9a8af0d2160e6e Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-02-09buffers: fix typoDamjan Marion3-3/+3
Change-Id: I4e836244409c98739a13092ee252542a2c5fe259 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-02-06buffers: make buffer data size configurable from startup configDamjan Marion3-5/+5
Example: buffers { default data-size 1536 } Change-Id: I5b4436850ca18025c9fdcfc7ed648c2c2732d660 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-01-25pg: bugfix for pg paylod hdr-sizeKingwel Xie1-3/+3
it was specified to 0 after https://gerrit.fd.io/r/16909 causes unformat_pg_ip4_header to wrongly set ip header len. do more check when assigning e->lsb_bit_offset to avoid negative value Change-Id: Ib772c7135cdeb355f0d60f1ee11602f6b5a0ff21 Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
2019-01-23pg: cli improvementKingwel Xie4-32/+97
1. show packet-generator verbose, display all edit-groups and hdr-size 2. unformat_pg_payload, always mark payload hdr-size as 0 3. packet-generator now can change rate/limit/size at runtime 4. validate_stream checks buffer min-size/max-size against all edit groups' header size 5. remove incorrect max packet size limit check in validate_stream(...) Change-Id: Ic45e4f2b98bc0fd7330e0b480dd677fa3c69a677 Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com> Signed-off-by: Dave Barach <dave@barachs.net>
2019-01-18Add vlib_buffer_copy_indices inline functionDamjan Marion1-4/+3
This reverts commit 1e59f9ddbdda14591967e1d66eab8623f9ba58e4. Change-Id: Iae1d372b887e170d28cac2fe4c61325ee5a5894a Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-01-06pktgen: support mixed multi/single chunk pcap replayDave Barach3-71/+165
Change-Id: I3d387b5e2b17f89ed688ea6cfee3fb6d782fe326 Signed-off-by: Dave Barach <dave@barachs.net>
2019-01-01buffers: remove unused codeDamjan Marion4-15/+7
Change-Id: If2bbfbc52994f5de0879763e0b7a7864498debb6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-20ethernet-input optimizationsDamjan Marion1-1/+19
Change-Id: I4ec7750ef58363bd8966a16a2baeec6db18b7e9e Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-17pcap-based dispatch tracerDave Barach2-2/+2
To facilitate dispatch trajectory tracing, vlib_buffer_t decoding, etc. through Wireshark Change-Id: I31356b9fa1f40cba8830aaf10a86a9fbb7546438 Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-14Remove c-11 memcpy checks from perf-critical codeDave Barach3-21/+25
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-13vlib rename vlib_frame_args(...) to vlib_frame_scalar_args(..)Damjan Marion1-2/+2
Typically we have scalar_size == 0, so it doesn't matter but vlib_frame_args was providing pointer to scalar frame data, not vector data. To avoid future confusion function is renamed to vlib_frame_scalar_args(...) Change-Id: I48b75523b46d487feea24f3f3cb10c528dde516f Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-27pg: incrementing len should be truncated byKingwel Xie1-12/+15
stream->max_packet_bytes This length is the payload length, and will impact the ip length when ip length is not specified. iplen = header_len + payload_len SO, better to make it comply with max_packet_bytes Change-Id: I8b0f7485e29fcaccae656f2d03b3b5e614300fb8 Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
2018-10-23c11 safe string handling supportDave Barach2-3/+3
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-19vppinfra: add atomic macros for __sync builtinsSirshak Das1-2/+3
This is first part of addition of atomic macros with only macros for __sync builtins. - Based on earlier patch by Damjan (https://gerrit.fd.io/r/#/c/10729/) Additionally - clib_atomic_release macro added and used in the absence of any memory barrier. - clib_atomic_bool_cmp_and_swap added Change-Id: Ie4e48c1e184a652018d1d0d87c4be80ddd180a3b Original-patch-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Sirshak Das <sirshak.das@arm.com> Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com> Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com> Reviewed-by: Steve Capper <steve.capper@arm.com>
2018-07-19Cleanup of handoff codeDamjan Marion1-3/+0
- removed handoff-dispatch node - removed some unused buffer metadata fields - enqueue to thread logic moved to inline function Change-Id: I7361e1d88f8cce74cd4fcec90d172eade1855cbd Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-17Packet generator: preserve pcap file timestampsDave Barach3-0/+8
Set vnet_buffer2(b0)->pg_replay_timestamp, for use when desired. Fix a memory leak in pg_stream_free(...), which wasn't freeing the replay packet templates. Change-Id: I01822a9e91a52de4774d2b95cf0c2ee254a915e9 Signed-off-by: Dave Barach <dave@barachs.net>
2018-04-27A bit of buffer metadata reshuffling to accommodate flow_idDamjan Marion1-1/+1
Change-Id: I2794384557c6272fe217269b14a9db09eda19220 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-07packet-generator: use default free listDamjan Marion2-63/+8
Change-Id: I2a34546f9b32edc9bfb86b5492dde34aaef49ccc Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-02-07Refactor vlib_buffer flagsDamjan Marion1-1/+1
Change-Id: I853386aebfe488ebb10328435b81b6e3403c5dd0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-01-23VPPAPIGEN: vppapigen replacement in Python PLY.Ole Troan1-1/+1
This is a version of the VPP API generator in Python PLY. It supports the existing language, and has a plugin architecture for generators. Currently C and JSON are supported. Changes: - vl_api_version to option version = "major.minor.patch" - enum support - Added error checking and reporting - import support (removed the C pre-processor) - services (tying request/reply together) Version: option version = "1.0.0"; Enum: enum colours { RED, BLUE = 50, }; define foo { vl_api_colours_t colours; }; Services: service { rpc foo returns foo_reply; rpc foo_dump returns stream foo_details; rpc want_stats returns want_stats_reply events ip4_counters, ip6_counters; }; Future planned features: - unions - bool, text - array support (including length) - proto3 output plugin - Refactor C/C++ generator as a plugin - Refactor Java generator as a plugin Change-Id: Ifa289966c790e1b1a8e2938a91e69331e3a58bdf Signed-off-by: Ole Troan <ot@cisco.com>
2017-11-21dpdk: add l2_hdr_offset and l3_hdr_offset in vlib_buffer_tDamjan Marion2-3/+3
Change-Id: I0a6d1257e391c3b6f7da6498bd5f7d4c545d17e9 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-11-10Break up vpe.apiNeale Ranns2-0/+269
- makes the VAPI generated file more consumable. - VOM build times improve. Change-Id: I838488930bd23a0d3818adfdffdbca3eead382df Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2017-10-04[aarch64] Fixes CLI crashes on dpaa2 platform.Christophe Fontaine2-2/+2
- always use 'va_args' as pointer in all format_* functions - u32 for all 'indent' params as it's declaration was inconsistent Change-Id: Ic5799309a6b104c9b50fec309cba789c8da99e79 Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
2017-07-10vlib: store buffer memory information in the buffer_mainDamjan Marion2-4/+4
Currently, buffer index is calculated as a offset to the physmem region shifted by log2_cacheline size. When DPDK is used we "hack" physmem data with information taken from dpdk mempool. This makes physmem code not usable with DPDK. This change makes buffer memory start and size independent of physmem basically allowing physmem to be used when DPDK plugin is loaded. Change-Id: Ieb399d398f147583b9baab467152a352d58c9c31 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-06Use thread local storage for thread indexDamjan Marion1-2/+2
This patch deprecates stack-based thread identification, Also removes requirement that thread stacks are adjacent. Finally, possibly annoying for some folks, it renames all occurences of cpu_index and cpu_number with thread index. Using word "cpu" is misleading here as thread can be migrated ti different CPU, and also it is not related to linux cpu index. Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-17Fix IP feature ordering.Neale Ranns1-4/+0
Drop comes before lookup when enabled. is_first_or_last is not required when setting a feature, the anchor is added in find_config_with_features(). Don't make the PG interfaces automatically L3 enabled, this way we can have tests that check the L3 protocol disbaled behaviour. Change-Id: Icef22a920b27ff9cec6ab2da6b05f05c532cb60f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-07DHCP Multiple Servers (VPP-602, VPP-605)Neale Ranns1-0/+6
Multiple DHCP (4 and/or 6) servers can be added and removed through multiple calls to the 'set dhcp server' API. All 4/6/ discover/solicit messages will then be replicated to all servers in the list. The expectation is that the servers/system is configured in such a way that this is viable. If VSS information is providied for the clinet VRF which also has multiple servers configured, then the same VSS information is sent to each server. Likewise the source address of packets sent to from VPP to each server is the same. Change-Id: I3287cb084c84b3f612b78bc69cfcb5b9c1f8934d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-01dpdk: be a pluginDamjan Marion2-8/+8
Change-Id: I238258cdeb77035adc5e88903d824593d0a1da90 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-22VPP-635: CLI Memory leak with invalid parameterBilly McFall1-10/+29
In the CLI parsing, below is a common pattern: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else return clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); } unformat_free (line_input); The 'else' returns if an unknown string is encountered. There a memory leak because the 'unformat_free(line_input)' is not called. There is a large number of instances of this pattern. Replaced the previous pattern with: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else { error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); goto done: } } /* ...Remaining code... */ done: unformat_free (line_input); return error; } In multiple files, 'unformat_free (line_input);' was never called, so there was a memory leak whether an invalid string was entered or not. Also, there were multiple instance where: error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); used 'input' as the last parameter instead of 'line_input'. The result is that output did not contain the substring in error, instead just an empty string. Fixed all of those as well. There are a lot of file, and very mind numbing work, so tried to keep it to a pattern to avoid mistakes. Change-Id: I8902f0c32a47dd7fb3bb3471a89818571702f1d2 Signed-off-by: Billy McFall <bmcfall@redhat.com> Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-03pg: add trace information for pg tx nodeDamjan Marion3-9/+46
Change-Id: I31730d58c34331f25f5b02cd065be94251f1302c Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion9-0/+3742
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>