Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: Ie4c5cfc4c97acb321a46b4df589dc44de1b616ba
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
According to the RFC 4096 (section 3.3.1) the DATA chunk needs to be
padded to a boundary of 4 bytes with zeros. This patch addresses that
requirement.
At the same time, this patch takes care of adding some hardening for
corner-cases where the transmitted tag could be wrong.
Change-Id: I3b653926e9933d0d3d46bc5f37eaceefd932e874
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I03bb47a2baa4375b7bf9347d95c4cc8de37fe510
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch separates setting of hardware interfaec and software
interface MTU. Software MTU is L2 payload MTU (i.e. not including L2
header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set.
Currently only IP4, IP6 are enabled in adjacency / rewrite code.
Documentation in src/vnet/MTU.md
Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This patch addresses two things:
1) The data retransmission which needs to be taken care of when the
SCTP_TIMER_T3_RXTX;
2) The correct calculation of the amount of data transmittable
considered: the local window, the peer window and any data inflight.
Change-Id: I2d03a6cb43e4e7770c4910f8547c66e1026aeace
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
A bug was found affecting the cumulative sending of SACK messages.
Because the next0 was never assigned to the next_output the SACK message
was never leaving the peer.
Further, two new flags have been added to distinguish when a peer is
AWAITING a SACK message (e.g. DATA is inflight and waiting to be
acknowledged).
Change-Id: Ibb5a98f7e5fed15cdc76710b74195cac031d59ed
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch adds the possibility to configure some behaviors of the SCTP
stack based on some tunable parameters (mainly ON/OFF). For the time
being, that is limited to the bundling option (multiplexing messages)
and to delaying the SACK message.
Change-Id: I696493e0309e47163c1e119c7d9f82f7d8ee6b87
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch addresses the need to handle timers timeouts (e.g. sent
chunks not being acked) for both the INIT and SHUTDOWN phases.
The INIT phase requires the handling of two timers the T1-init and
T1-cookie timers whilst the SHUTDOWN phase requires the handling of the
T2-shutdown timer only for the retransmission case.
Left to be implemented is the handling of the DATA chunks retransmission
(e.g. T3-rxtx expiration) but that will be submitted with a separate
patch.
Change-Id: I2b2e13dce11000aea3c7d965f02b27b76c97e605
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
It consists of two main parts. First, add an application transport type
whereby applications can offer transport to other applications. For
instance, a tls app can offer transport services to other applications.
And second, a tls transport app that leverages the mbedtls library for
tls protocol implementation.
Change-Id: I616996c6e6539a9e2368fab8a1ac874d7c5d9838
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
This patch adds an API to delete a sub-connection following a SRC/DST IP
mapping as required by the RFC4960.
Change-Id: I7673dd07352557442ffeed6c6c00da274b24953d
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch adds an API to add a sub-connection following a SRC/DST IP
mapping as required by the RFC4960.
At the same time, it changes the way the next available sub-connection
is being calculated: rather than having an index in the parent
connection which is prone to many issues at run-time, the next available
sub-connection is being calculated by looking at the state of the set
sub-connections and if marked as DOWN it means that is an available slot
to be used.
Change-Id: I662be6a247bfbbe8bf9aaf3f485183c07ef862fe
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch addresses the requirements depicted in section 5.2.4 of the
RFC 4960. It also takes care of handling the ERROR chunk and obviously
the STALE COOKIE error.
Change-Id: I6b88a9371546b18a52abac22f7c593a5f16be838
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
As per RFC4960 the INIT chunk could be received in unexpected scenarios
and - depending on the state of the internal state-machine - the INIT
chunk requires different treatment.
This patch addresses section 5.2.1 and 5.2.2 of the RFC4960.
Change-Id: Ib23ef490c6a5ca3da6c46a9584b75e7577cb7042
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
A bug was found when multiple SCTP connections were being opened to the
same SCTP server. This patch addresses that problem, removing the use of
the 'parent' pointer approach for sub-connection and saving instead
within the sub-connection itself the ID representing its position. That
facilitates pointer-arithmetic to be computed in the
get_connection_from_transport().
Change-Id: Iaa1f4efc501590be1c93e42fd6fe3d6e02f635eb
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch adds some missing information in various debugging messages
which can help with debugging state-machine and connection-tracking.
It also renames some internal variable names for better code
readibility.
Change-Id: I68503fc0214300032f7514426c8b5b2b12edf11a
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch addresses the requirements depicted by section 7.1.1 and
7.1.2 of the RFC 4960. Specifically, it implements the Slow-start and
Congestion-avoidance policies.
The patch also took care of correctly implementing some 'formatting'
functions required - for instance - in packet(s) tracing.
Change-Id: I68eade1b30345de3acb3ac8a653a5ef76eb6d2ac
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch addresses the SCTP requirement for multiple sub-connections
to implement the so called 'multi-homed' scenario.
Change-Id: Ibce18f216e9d2bebe318992c441bf278e16aad17
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: I1f8a325eac2a9e2c825996f04026ae86259a7ddd
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch takes care of some refactoring, including the initialization
of the timestamp to calculate the RTO, the output state-machine
validation which can be enabled (disabled by default) when debugging and
some clean-up of unused fields.
It also addresses the requirement of Karn's algorithm when computing the
RTO.
Change-Id: I6b875152369bff23cad085708cec1f7e1151cfa8
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch address the need to send/receive heartbeats between peers.
At the same time, the number of unacked heartbeats is tracked and when
the peer requests to send DATA to the remote-peer the value of unacked
heartbeats needs to be checked against the maximum value allowed for
retransmissions. If the unacked heartbeats value is higher then the
remote-peer is considered unreachable and the connetion needs to be
shutdown.
Change-Id: I2b1a21c26775e734dbe82486f40982ed5702dc63
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
When the number of threads results being more than 1, the spinlock
structure requires to be initialized otherwise subsequent calls to
the "lock" API (clib_spinlock_lock_if_init) would result in a void
operation.
Change-Id: Ia268c4687252e41962bb3f1217f0a849d8c40385
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch addresses the need to calculate the RTO / RTT and RTTVAR
according to the rules depicted by the RFC4960 at section 6.3.1
Change-Id: I1d346f3c67610070b3f602f32c7738d58b99ffed
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch addresses the missing field in various data-structures to
track valuable information to implement the congestion-control
algorithms and manage sub-connections states.
It adds the possibility to queue up to 2 SACKs chunks when the connection
is not gapping.
At the same time, it pushes some variable/field renaming for better
readibility.
Change-Id: Idcc53512983456779600a75e78e21af078e46602
Signed-off-by: Marco Varlese <marco.varlese@suse.de>
|
|
== CONTENT ==
* SCTP chunks definition as per RFC4960;
* Helper functions to set/get values to/from the corresponding chunks;
* Hooks to the session/application layers;
* Complete state-machine handling;
* Implementation for unexpected chunk received in a certain
state (state-machine error handling)
* Support for 1-single connection;
* Sample application to test receive/transmit data-path;
* Test to validate SCTP stack;
Change-Id: I1b55c455ab400be9513f4e094dadfc3181d2ebc9
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|